Perioperative FOLFOX 4 Versus FOLFOX 4 Plus Cetuximab Versus Immediate Surgery for High-Risk Stage II and III Colon Cancers: A Phase II Multicenter Randomized Controlled Trial (PRODIGE 22).

BACKGROUND: Perioperative chemotherapy has proven valuable in several tumors, but not in colon cancer (CC). OBJECTIVE: The aim of this study was to evaluate the efficacy and safety of perioperative chemotherapy in patients with locally advanced nonmetastatic CC. METHODS: This is a French multicenter randomized phase II trial in patients with resectable high-risk T3, T4, and/or N2 CC on baseline computed tomography (CT) scan. Patients were randomized to receive either 6 months of adjuvant FOLFOX after colectomy (control) or perioperative FOLFOX for 4 cycles before surgery and 8 cycles after (FOLFOX peri-op). In RAS wild-type patients, a third arm testing perioperative FOLFOX-cetuximab was added. Tumor Regression Grade (TRG1) of Ryan et al was the primary endpoint. Secondary endpoints were toxicity, perioperative morbidity, and quality of surgery. RESULTS: A total of 120 patients were enrolled. At interim analysis, the FOLFOX-cetuximab arm was stopped (lack of efficacy). The remaining 104 patients (control, n = 52; FOLFOX preop n = 52) represented our intention-to-treat population. In the FOLFOX perioperative group, 96% received the scheduled 4 cycles before surgery. R0 resection and complete mesocolic excision rate were 94% and 93%, respectively. Overall mortality and morbidity rates were similar in both groups. Perioperative FOLFOX chemotherapy did not improve major pathological response rate (TRG1 = 8%) but was associated with a significant pathological regression (TRG1-2 = 44% vs 8%, P < 0.001) and a trend to tumor downstaging as compared to the control group. CT scan criteria were associated with a 33% rate of overstaging in control group. CONCLUSIONS: Perioperative FOLFOX for locally advanced resectable CC is feasible with an acceptable tolerability but is not associated with an increased major pathological response rate as expected. However, perioperative FOLFOX induces pathological regression and downstaging. Better preoperative staging tools are needed to decrease the risk of overtreating patients.

Heat transfer enhancement in cryogenic quenching process.

This paper reports a heat transfer advancement in the cryogenic quenching process. An experiment was performed to evaluate the enhancement of quenching heat transfer by the use of metal tubes with low thermal conductivity coating layers. Four coating thicknesses with various coolant mass flow rates of liquid nitrogen were investigated. The results indicated that the tube inner surface coating greatly enhanced the quenching efficiency. The quenching efficiency was found to increase with increasing number of coating layers, and the efficiency also increased with decreasing mass flow rates. In general, the efficiencies cover a range between 40.6% and 80%. Comparing to the bare surface case, the percentage increase in the quenching efficiency was the minimum at 4.2% for a single coated layer at the highest flow rate and the maximum of 109.1% for four coated layers at the lowest flow rate. The coated tubes could save up to 53% in the amount of cryogen consumption.

Experimental Effervescence and Freezing Point Depression Measurements of Nitrogen in Liquid Methane-Ethane Mixtures.

NASA is designing an unmanned submarine to explore the depths of the hydrocarbon-rich seas on Saturn's moon Titan. Data from Cassini indicates that the Titan north polar environment sustains stable seas of variable concentrations of ethane, methane, and nitrogen, with a surface temperature near 93 K. The submarine must operate autonomously, study atmosphere/sea exchange, interact with the seabed, hover at the surface or any depth within the sea, and be capable of tolerating variable hydrocarbon compositions. Currently, the main thermal design concern is the effect of effervescence on submarine operation, which affects the ballast system, science instruments, and propellers. Twelve effervescence measurements on various liquid methane-ethane compositions with dissolved gaseous nitrogen are thus presented from 1.5 bar to 4.5 bar at temperatures from 92 K to 96 K to simulate the conditions of the seas. After conducting effervescence measurements, two freezing point depression measurements were conducted. The freezing liquid line was depressed more than 15 K below the triple point temperatures of pure ethane (90.4 K) and pure methane (90.7 K). Experimental effervescence measurements will be used to compare directly with effervescence modeling to determine if changes are required in the design of the thermal management system as well as the propellers.

Mechanical strain in actin networks regulates FilGAP and integrin binding to filamin A.

Mechanical stresses elicit cellular reactions mediated by chemical signals. Defective responses to forces underlie human medical disorders such as cardiac failure and pulmonary injury. The actin cytoskeleton's connectivity enables it to transmit forces rapidly over large distances, implicating it in these physiological and pathological responses. Despite detailed knowledge of the cytoskeletal structure, the specific molecular switches that convert mechanical stimuli into chemical signals have remained elusive. Here we identify the actin-binding protein filamin A (FLNA) as a central mechanotransduction element of the cytoskeleton. We reconstituted a minimal system consisting of actin filaments, FLNA and two FLNA-binding partners: the cytoplasmic tail of ß-integrin, and FilGAP. Integrins form an essential mechanical linkage between extracellular and intracellular environments, with ß-integrin tails connecting to the actin cytoskeleton by binding directly to filamin. FilGAP is an FLNA-binding GTPase-activating protein specific for RAC, which in vivo regulates cell spreading and bleb formation. Using fluorescence loss after photoconversion, a novel, high-speed alternative to fluorescence recovery after photobleaching, we demonstrate that both externally imposed bulk shear and myosin-II-driven forces differentially regulate the binding of these partners to FLNA. Consistent with structural predictions, strain increases ß-integrin binding to FLNA, whereas it causes FilGAP to dissociate from FLNA, providing a direct and specific molecular basis for cellular mechanotransduction. These results identify a molecular mechanotransduction element within the actin cytoskeleton, revealing that mechanical strain of key proteins regulates the binding of signalling molecules.

High-precision x-ray polarimetry.

The polarization purity of 6.457- and 12.914-keV x rays has been improved to the level of 2.4×10(-10) and 5.7×10(-10). The polarizers are channel-cut silicon crystals using six 90° reflections. Their performance and possible applications are demonstrated in the measurement of the optical activity of a sucrose solution.

Cryogenic spray quenching of simulated propellant tank wall using coating and flow pulsing in microgravity.

In-space cryogenic propulsion will play a vital role in NASA's return to the Moon mission and future mission to Mars. The enabling of in-space cryogenic engines and cryogenic fuel depots for these future manned and robotic space exploration missions begins with the technology development of advanced cryogenic thermal-fluid management systems for the propellant transfer lines and storage system. Before single-phase liquid can flow to the engine or spacecraft receiver tank, the connecting transfer line and storage tank must first be chilled down to cryogenic temperatures. The most direct and simplest method to quench the line and the tank is to use the cold propellant itself that results in the requirement of minimizing propellant consumption during chilldown. In view of the needs stated above, a highly efficient thermal-fluid management technology must be developed to consume the minimum amount of cryogen during chilldown of a transfer line and a storage tank. In this paper, we suggest the use of the cryogenic spray for storage tank chilldown. We have successfully demonstrated its feasibility and high efficiency in a simulated space microgravity condition. In order to maximize the storage tank chilldown efficiency for the least amount of cryogen consumption, the technology adopted included cryogenic spray cooling, Teflon thin-film coating of the simulated tank surface, and spray flow pulsing. The completed flight experiments successfully demonstrated that spray cooling is the most efficient cooling method for the tank chilldown in microgravity. In microgravity, Teflon coating alone can improve the efficiency up to 72% and the efficiency can be improved up to 59% by flow pulsing alone. However, Teflon coating together with flow pulsing was found to substantially enhance the chilldown efficiency in microgravity for up to 113%.

Actin-binding proteins.

Much new information on the sequence, structure, and function of filament crosslinking, capping, and severing proteins is now known. Other significant findings include identification of a new abundant monomer-sequestering protein in platelets, and evidence that many actin-binding proteins interact with phosphoinositides and that this interaction may have metabolic consequences.

WIP regulates N-WASP-mediated actin polymerization and filopodium formation.

Induction of filopodia is dependent on activation of the small GTPase Cdc42 and on neural Wiskott-Aldrich-syndrome protein (N-WASP). Here we show that WASP-interacting protein (WIP) interacts directly with N-WASP and actin. WIP retards N-WASP/Cdc42-activated actin polymerization mediated by the Arp2/3 complex, and stabilizes actin filaments. Microinjection of WIP into NIH 3T3 fibroblasts induces filopodia; this is inhibited by microinjection of anti-N-WASP antibody. Microinjection of anti-WIP antibody inhibits induction of filopodia by bradykinin, by an active Cdc42 mutant (Cdc42(V12)) and by N-WASP. Our results indicate that WIP and N-WASP may act as a functional unit in filopodium formation, which is consistent with their role in actin-tail formation in cells infected with vaccinia virus or Shigella.

N-WASP deficiency reveals distinct pathways for cell surface projections and microbial actin-based motility.

The Wiskott-Aldrich syndrome protein (WASP) family of molecules integrates upstream signalling events with changes in the actin cytoskeleton. N-WASP has been implicated both in the formation of cell-surface projections (filopodia) required for cell movement and in the actin-based motility of intracellular pathogens. To examine N-WASP function we have used homologous recombination to inactivate the gene encoding murine N-WASP. Whereas N-WASP-deficient embryos survive beyond gastrulation and initiate organogenesis, they have marked developmental delay and die before embryonic day 12. N-WASP is not required for the actin-based movement of the intracellular pathogen Listeria but is absolutely required for the motility of Shigella and vaccinia virus. Despite these distinct defects in bacterial and viral motility, N-WASP-deficient fibroblasts spread by using lamellipodia and can protrude filopodia. These results imply a crucial and non-redundant role for N-WASP in murine embryogenesis and in the actin-based motility of certain pathogens but not in the general formation of actin-containing structures.

Revealing the dynamics of prospective memory processes in children with eye movements.

Prospective memory (PM), the memory for delayed intentions, develops during childhood. The current study examined PM processes, such as monitoring, PM cue identification and intention retrieval with particular focus on their temporal dynamics and interrelations during successful and unsuccessful PM performance. We analysed eye movements of 6-7 and 9-10 year olds during the inspection of movie stills while they completed one of three different tasks: scene viewing followed by a snippet allocation task, a PM task and a visual search task. We also tested children's executive functions of inhibition, flexibility and working memory. We found that older children outperformed younger children in all tasks but neither age group showed variations in monitoring behaviour during the course of the PM task. In fact, neither age group monitored. According to our data, initial processes necessary for PM success take place during the first fixation on the PM cue. In PM hit trials we found prolonged fixations after the first fixation on the PM cue, and older children showed a greater efficiency in PM processes following this first PM cue fixation. Regarding executive functions, only working memory had a significant effect on children's PM performance. Across both age groups children with better working memory scores needed less time to react to the PM cue. Our data support the notion that children rely on spontaneous processes to notice the PM cue, followed by a resource intensive search for the intended action.

An advance in transfer line chilldown heat transfer of cryogenic propellants in microgravity using microfilm coating for enabling deep space exploration.

The extension of human space exploration from a low earth orbit to a high earth orbit, then to Moon, Mars, and possibly asteroids is NASA's biggest challenge for the new millennium. Integral to this mission is the effective, sufficient, and reliable supply of cryogenic propellant fluids. Therefore, highly energy-efficient thermal-fluid management breakthrough concepts to conserve and minimize the cryogen consumption have become the focus of research and development, especially for the deep space mission to mars. Here we introduce such a concept and demonstrate its feasibility in parabolic flights under a simulated space microgravity condition. We show that by coating the inner surface of a cryogenic propellant transfer pipe with low-thermal conductivity microfilms, the quenching efficiency can be increased up to 176% over that of the traditional bare-surface pipe for the thermal management process of chilling down the transfer pipe. To put this into proper perspective, the much higher efficiency translates into a 65% savings in propellant consumption.

P-Selectin glycoprotein ligand 1 (PSGL-1) is expressed on platelets and can mediate platelet-endothelial interactions in vivo.

The platelet plays a pivotal role in maintaining vascular integrity. In a manner similar to leukocytes, platelets interact with selectins expressed on activated endothelium. P-selectin glycoprotein ligand 1 (PSGL-1) is the main P-selectin ligand expressed on leukocytes. Searching for platelet ligand(s), we used a P-selectin-immunoglobulin G (IgG) chimera to affinity purify surface-biotinylated proteins from platelet lysates. P-selectin-bound ligands were eluted with ethylenediaminetetraacetic acid. An approximately 210-kD biotinylated protein was isolated from both human neutrophil and platelet preparations. A band of the same size was also immunopurified from human platelets using a monoclonal anti-human PSGL-1 antibody and could be blotted with P-selectin-IgG. Under reducing conditions, both the predicted PSGL-1 approximately 210-kD dimer and the approximately 120-kD monomer were isolated from platelets. Comparative immunoelectron microscopy and Western blotting experiments suggested that platelet PSGL-1 expression is 25-100-fold lower than that of leukocytes. However, patients with chronic idiopathic thrombocytopenic purpura who harbor predominantly young platelets displayed greater expression, indicating that PSGL-1 expression may be decreased during platelet aging. By flow cytometry, thrombin-activated platelets from normal individuals exhibited greater expression than those unstimulated. An inhibitory anti-PSGL-1 antibody significantly reduced platelet rolling in mesenteric venules, as observed by intravital microscopy. Our results indicate that functional PSGL-1 is expressed on platelets, and suggest an additional mechanism by which selectins and their ligands participate in inflammatory and/or hemostatic responses.

Mechanisms of actin rearrangements mediating platelet activation.

The detergent-insoluble cytoskeleton of the resting human blood platelet contains approximately 2,000 actin filaments approximately 1 micron in length crosslinked at high angles by actin-binding protein and which bind to a spectrin-rich submembrane lamina (Fox, J., J. Boyles, M. Berndt, P. Steffen, and L. Anderson. 1988. J. Cell Biol. 106:1525-1538; Hartwig, J., and M. DeSisto. 1991. J. Cell Biol. 112:407-425). Activation of the platelets by contact with glass results within 30 s in a doubling of the polymerized actin content of the cytoskeleton and the appearance of two distinct new actin structures: bundles of long filaments within filopodia that end at the filopodial tips (filopodial bundles) and a circumferential zone of orthogonally arrayed short filaments within lamellipodia (lamellipodial network). Neither of these structures appears in cells exposed to glass with cytochalasin B present; instead the cytoskeletons have numerous 0.1-0.3-microns-long actin filament fragments attached to the membrane lamina. With the same time course as the glass-induced morphological changes, cytochalasin-sensitive actin nucleating activity, initially low in cytoskeletons of resting platelets, increases 10-fold in cytoskeletons of thrombin-activated platelets. This activity decays with a time course consistent with depolymerization of 0.1-0.3-microns-long actin filaments, and phalloidin inhibits this decay. Cytochalasin-insensitive and calcium-dependent nucleation activity also increases markedly in platelet extracts after thrombin activation of the cells. Prevention of the rise in cytosolic Ca2+ normally associated with platelet activation with the permeant Ca2+ chelator, Quin-2, inhibits formation of lamellipodial networks but not filopodial bundles after glass contact and reduces the cytochalasin B-sensitive nucleation activity by 60% after thrombin treatment. The filopodial bundles, however, are abnormal in that they do not end at the filopodial tips but form loops and return to the cell body. Addition of calcium to chelated cells restores lamellipodial networks, and calcium plus A23187 results in cytoskeletons with highly fragmented actin filaments within seconds. Immunogold labeling with antibodies against gelsolin reveals gelsolin molecules at the ends of filaments attached to the submembrane lamina of resting cytoskeletons and at the ends of some filaments in the lamellipodial networks and filopodial bundles of activated cytoskeletons. Addition of monomeric actin to myosin subfragment 1-labeled activated cytoskeletons leads to new (undecorated) filament growth off the ends of filaments in the filopodial bundles and the lamellipodial network. The simplest explanation for these findings is that gelsolin caps the barbed ends of the filaments in the resting platelet. Uncapping some of these filaments after activation leads to filopodial bundles.(ABSTRACT TRUNCATED AT 400 WORDS)

The cytoskeleton of the resting human blood platelet: structure of the membrane skeleton and its attachment to actin filaments.

We used high-resolution EM and immunocytochemistry in combination with different specimen preparation techniques to resolve the ultrastructure of the resting platelet cytoskeleton. The periphery of the cytoskeleton, an electron-dense subplasmalemmal region in thin section electron micrographs, is a tightly woven planar sheet composed of a spectrin-rich network whose interstices contain GPIb/IX-actin-binding protein (ABP) complexes. This membrane skeleton connects to a system of curved actin filaments (F-actin) that emanate from a central oval core of F-actin cross-linked by ABP. The predominant interaction of the radial actin filaments with the membrane skeleton is along their sides, and the strongest connection between the membrane skeleton and F-actin is via ABP-GPIb ligands, although there is evidence for spectrin attaching to the ends of the radial actin filaments as well. Since a mechanical separation of the F-actin cores and radial F-actin-GPIb-ABP complexes from the underlying spectrin-rich skeleton leads to the latter's expansion, it follows that the spectrin-based skeleton of the resting cell may be held in a compressed form by interdigitating GPIb/IX complexes which are immobilized by radial F-actin-ABP anchors.

The architecture of actin filaments and the ultrastructural location of actin-binding protein in the periphery of lung macrophages.

A highly branched filament network is the principal structure in the periphery of detergent-extracted cytoskeletons of macrophages that have been spread on a surface and either freeze or critical point dried, and then rotary shadowed with platinum-carbon. This array of filaments completely fills lamellae extended from the cell and bifurcates to form 0.2-0.5 micron thick layers on the top and bottom of the cell body. Reaction of the macrophage cytoskeletons with anti-actin IgG and with anti-IgG bound to colloidal gold produces dense staining of these filaments, and incubation with myosin subfragment 1 uniformly decorates these filaments, identifying them as actin. 45% of the total cellular actin and approximately 70% of actin-binding protein remains in the detergent-insoluble cell residue. The soluble actin is not filamentous as determined by sedimentation analysis, the DNAase I inhibition assay, and electron microscopy, indicating that the cytoskeleton is not fragmented by detergent extraction. The spacing between the ramifications of the actin network is 94 +/- 47 nm and 118 +/- 72 nm in cytoskeletons prepared for electron microscopy by freeze drying and critical point drying, respectively. Free filament ends are rare, except for a few which project upward from the body of the network or which extend down to the substrate. Filaments of the network intersect predominantly at right angles to form either T-shaped and X-shaped overlaps having striking perpendicularity or else Y-shaped intersections composed of filaments intersecting at 120-130 degrees angles. The actin filament concentration in the lamellae is high, with an average value of 12.5 mg/ml. The concentration was much more uniform in freeze-dried preparations than in critical point-dried specimens, indicating that there is less collapse associated with the freezing technique. The orthogonal actin network of the macrophage cortical cytoplasm resembles actin gels made with actin-binding protein. Reaction of cell cytoskeletons and of an actin gel made with actin-binding protein with anti-actin-binding protein IgG and anti-IgG-coated gold beads resulted in the deposition of clusters of gold at points where filaments intersect and at the ends of filaments that may have been in contact with the membrane before its removal with detergent. In the actin gel made with actin-binding protein, 75% of actin-fiber intersections labeled, and the filament spacing between intersections is consistent with that predicted on theoretical grounds if each added actin-binding protein molecule cross-links two filaments to form an intersection in the gel.(ABSTRACT TRUNCATED AT 400 WORDS)

Structure of the novel membrane-coating material in proton-secreting epithelial cells and identification as an H+ATPase.

Specialized proton-secreting cells known collectively as mitochondria-rich cells are found in a variety of transporting epithelia, including the kidney collecting duct (intercalated cells) and toad and turtle urinary bladders. These cells contain a population of characteristic tubulovesicles that are believed to be involved in the shuttling of proton pumps (H+ATPase) to and from the plasma membrane. These transporting vesicles have a dense, studlike material coating the cytoplasmic face of their limiting membranes and similar studs are also found beneath parts of the plasma membrane. We have recently shown that this membrane coat does not contain clathrin. The present study was performed to determine the structure of this coat in rapidly frozen and freeze-dried tissue, and to determine whether the coat contains a major membrane protein transported by these vesicles, a proton pumping H+ATPase. The structure of the coat was examined in proton-secreting, mitochondria-rich cells from toad urinary bladder epithelium by rapidly freezing portions of apical membrane and associated cytoplasm that were sheared away from the remainder of the cell using polylysine-coated coverslips. Regions of the underside of these apical membranes as large as 0.2 micron2 were decorated by studlike projections that were arranged into regular hexagonal arrays. Individual studs had a diameter of 9.5 nm and appeared to be composed of multiple subunits arranged around a central depression, possibly representing a channel. The studs had a density of approximately 16,800 per micron2 of membrane. Similar arrays of studs were also found on vesicles trapped in the residual band of cytoplasm that remained attached to the underside of the plasma membrane, but none were seen in adjacent granular cells. To determine whether these arrays of studs contained H+ATPase molecules, we examined a preparation of affinity-purified bovine medullary H+ATPase, using the same technique, after incorporation of the protein eluted from a monoclonal antibody affinity column into phospholipid liposomes. The affinity-purified protein was shown to be capable of ATP-dependent acidification. In such preparations, large paracrystalline arrays of studs identical in appearance to those seen in situ were found. The dimensions of the studs as well as the number per square micrometer of membrane were identical to those of toad bladder mitochondria-rich cells: 9.5 nm in diameter, 16,770 per micron2 of membrane.(ABSTRACT TRUNCATED AT 400 WORDS)

Two pathways through Cdc42 couple the N-formyl receptor to actin nucleation in permeabilized human neutrophils.

We developed a permeabilization method that retains coupling between N-formyl-methionyl-leucyl-phenylalanine tripeptide (FMLP) receptor stimulation, shape changes, and barbed-end actin nucleation in human neutrophils. Using GTP analogues, phosphoinositides, a phosphoinositide-binding peptide, constitutively active or inactive Rho GTPase mutants, and activating or inhibitory peptides derived from neural Wiskott-Aldrich syndrome family proteins (N-WASP), we identified signaling pathways leading from the FMLP receptor to actin nucleation that require Cdc42, but then diverge. One branch traverses the actin nucleation pathway involving N-WASP and the Arp2/3 complex, whereas the other operates through active Rac to promote actin nucleation. Both pathways depend on phosphoinositide expression. Since maximal inhibition of the Arp2/3 pathway leaves an N17Rac inhibitable alternate pathway intact, we conclude that this alternate involves phosphoinositide-mediated uncapping of actin filament barbed ends.

Actin-binding protein promotes the bipolar and perpendicular branching of actin filaments.

Branching filaments with striking perpendicularity form when actin polymerizes in the presence of macrophage actin-binding protein. Actin-binding protein molecules are visible at the branch points. Compared with actin polymerized in the absence of actin-binding proteins, not only do the filaments branch but the average length of the actin filaments decreases from 3.2 to 0.63 micrometer. Arrowhead complexes formed by addition of heavy meromyosin molecules to the branching actin filaments point toward the branch points. Actin-binding protein also accelerates the onset of actin polymerization. All of these findings show that actin filaments assemble from nucleating sites on actin-binding protein dimers. A branching polymerization of actin filaments from a preexisting lattice of actin filaments joined by actin-binding protein molecules could generate expansion of cortical cytoplasm in amoeboid cells.

Three-dimensional structure of actin filaments and of an actin gel made with actin-binding protein.

Purified muscle actin and mixtures of actin and actin-binding protein were examined in the transmission electron microscope after fixation, critical point drying, and rotary shadowing. The three-dimensional structure of the protein assemblies was analyzed by a computer-assisted graphic analysis applicable to generalized filament networks. This analysis yielded information concerning the frequency of filament intersections, the filament length between these intersections, the angle at which filaments branch at these intersections, and the concentration of filaments within a defined volume. Purified actin at a concentration of 1 mg/ml assembled into a uniform mass of long filaments which overlap at random angles between 0 degrees and 90 degrees. Actin in the presence of macrophage actin-binding protein assembled into short, straight filaments, organized in a perpendicular branching network. The distance between branch points was inversely related to the molar ratio of actin-binding protein to actin. This distance was what would be predicted if actin filaments grew at right angles off of nucleation sites on the two ends of actin-binding protein dimers, and then annealed. The results suggest that actin in combination with actin-binding protein self-assembles to form a three-dimensional network resembling the peripheral cytoskeleton of motile cells.

Interactions of actin, myosin, and a new actin-binding protein of rabbit pulmonary macrophages. II. Role in cytoplasmic movement and phagocytosis.

Actin and myosin of rabbit pulmonary macrophages are influenced by two other proteins. A protein cofactor is required for the actin activation of macrophage myosin Mg2 ATPase activity, and a high molecular weight actin-binding protein aggregates actin filaments (Stossel T.P., and J.H. Hartwig. 1975. J. Biol. Chem. 250:5706-5711)9 When warmed in 0.34 M sucrose solution containing Mg2-ATP and dithiothreitol, these four proteins interact cooperatively. Acin-binding protein in the presence of actin causes the actin to form a gel, which liquifies when cooled. The myosin contracts the gel into an aggregate, and the rate of aggregation is accelerated by the cofactor. Therefore, we believe that these four proteins also effec the temperature-dependent gelation and aggregation of crude sucrose extracts pulmonary macrophages containing Mg2-ATP and dithiothreitol. The gelled extracts are composed of tangled filaments. Relative to homogenates of resting macrophages, the distribution of actin-binding protein in homogenates of phagocytizing macrophages is altered such that 2-6 times more actin-binding protein is soluble. Sucrose extracts of phagocytizing macrophages gel more rapidly than extracts of resting macrophages. Phagocytosis by pulmonary macrophages involves the formation of peripheral pseudopods containing filaments. The findings suggest that the actin-binding protein initiates a cooperative interaction of contractile proteins to generate cytoplasmic gelation, and that phagocytosis influences the behavior of the actin-binding protein.