Efficiency of diesel-contaminated soil washing with different tween 80 surfactant concentrations, pH, and bentonite ratios.

Soil contaminated with diesel fuel is a hazard to the environment and people; therefore, it needs to be remediated. Soil washing enhanced with Tween 80 (TW80), non-toxic and non-ionic surfactant, can effectively remove diesel from contaminated soils. In this study, the effects of 0.01%, 0.1%, 0.5%, 1%, and 1.5% (v/v) [TW80] concentrations; 0%, 5%, and 15% (w/w) bentonite; and variation in pH on washing efficiency were examined in a batch test. The prepared samples were physiochemically characterized on the basis of particle size, zeta potential, cation exchange capacity (CEC), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) analysis. When the bentonite content in soil was 5% or 15%, 1.5% [TW80] solution exhibited the highest washing efficiency. The diesel removal efficiencies in soil with 0% bentonite were slightly higher than those in soils with 5% and 15% bentonite because of the increase in adsorption sites by bentonite; consequently, diesel could not be easily washed out. The extracted n-alkanes showed that the percentage of carbon number 20 was higher than that of the other even-numbered carbons in the retained washed samples analyzed by gas chromatography-mass spectrometry (GC-MS). In all the washing tests, the diesel removal efficiencies in soil with 15% bentonite and 0.1% [TW80] were lower than those in soil with 15% bentonite and water because of adsorption. The bentonite samples washed with TW80 have different morphologies, with a voluminous structure composed of the fusion of all layered structures, as supported by SEM results. Changes in the diesel content and residual TW80 content in the soil before and after washing were shown by the carbon content in the EDS results. The mechanism of the washing effect was investigated by CEC and zeta potential measurements. This study may aid in selecting appropriate conditions for improving washing efficiencies in future field applications.

The comprehensive effects of aluminum oxide nanoparticles on the physiology of freshwater microalga Scenedesmus obliquus and it's phycoremediation performance for the removal of sulfacetamide.

Nanoparticles are inevitable byproducts of modern industry. However, the environmental impacts arising from industrial applications of nanoparticles are largely under-reported. This study evaluated the ecotoxicological effects of aluminum oxide nanoparticles (Al2O3NP) and its influence on sulfacetamide (SA) biodegradation by a freshwater microalga, Scenedesmus obliquus. Although Al2O3NP showed limited toxicity effect on S. obliquus, we observed the toxicity attenuation aspect of Al2O3NP in a mixture of sulfacetamide on microalgae. The addition of 100 mg L-1 of Al2O3NP and 1 mg L-1 of SA reduced total chlorophyll by 23.3% and carotenoids by 21.6% in microalgal compared to control. The gene expression study demonstrated that ATPF0C, Lhcb1, HydA, and psbA genes responsible for ATP synthesis and the photosynthetic system were significantly downregulated, while the Tas gene, which plays a major role in biodegradation of organic xenobiotic chemicals, was significantly upregulated at 1 and 100 mg L-1 of Al2O3NP. The S. obliquus removed 16.8% of SA at 15 mg L-1 in 14 days. However, the removal was slightly enhanced (18.8%) at same concentration of SA in the presence of 50 mg L-1 Al2O3NP. This result proves the stability of sulfacetamide biodegradation capacity of S. obliquus in the presence of Al2O3NP co-contamination. The metabolic analysis showed that SA was degraded into simpler byproducts such as sulfacarbamide, sulfaguanidine, sulfanilamide, 4-(methyl sulfonyl)aniline, and N-hydroxy-benzenamine which have lower ecotoxicity than SA, demonstrating that the ecotoxicity of sulfacetamide has significantly decreased after the microalgal degradation, suggesting the environmental feasibility of microalgae-mediated wastewater technology. This study provides a deeper understanding of the impact of nanoparticles such as Al2O3NP on aquatic ecosystems.

Biodiesel production potential of microalgae, cultivated in acid mine drainage and livestock wastewater.

The adaptability and biofuel production potential of two strains of microalgae isolated and cultivated in livestock wastewater effluent (LWE) with acid mine drainage (AMD) were investigated. The isolated strains of microalgae from samples obtained from LWE and AMD, two microalgal strains (Nephroselmis sp. KGE2 and Autodesmus obliquus KGE17) were selected based on their growth rate and lipid productivity. The dry cell weight of Nephroselmis sp. KGE2 and Autodesmus obliquus KGE17 after 20 days of cultivation in AMD increased from 0.05 to 0.59 g/L and from 0.05 to 0.55 g/L, respectively. These findings revealed a significant accumulation of fatty acids with increasing AMD content. Nephroselmis sp. KGE2 in LWE with 5% AMD demonstrated a higher growth rate (0.59 ± 0.03 g/L) and fatty acid production (401.5 ± 47.3 mg/L) than Autodesmus obliquus KGE17 with 5% AMD. Additionally, Nephroselmis sp. KGE2 had C16-C18 fatty acid content (92.4%) in LWE with AMD. Biodiesel produced from Nephroselmis sp. KGE2 had a higher cetane number (52.31) and iodine value (88.26 g I2/100 g oil). Consequently, Nephroselmis sp. KGE2 can be considered a potential candidate for biodiesel production using AMD as an iron source.

Enhancing polyethylene terephthalate conversion through efficient microwave-assisted deep eutectic solvent-catalyzed glycolysis.

Chemical recycling of plastics is a promising approach for effectively depolymerizing plastic waste into its constituent monomers, thereby contributing to the realization of a sustainable circular economy. Glycolysis, which converts polyethylene terephthalate (PET) into the monomer bis(2-hydroxyethyl) terephthalate (BHET), has emerged as a cost-effective and commercially viable chemical recycling process. However, glycolysis requires long reaction times and high energy consumption, limiting its industrialization. In this study, we develop an energy-efficient microwave-assisted deep eutectic solvent-catalyzed glycolysis method to degrade PET effectively and rapidly, resulting in a high BHET yield. This combined approach enables the quantitative degradation of PET within 9 min, achieving a high BHET yield of approximately 99% under optimal reaction conditions. Furthermore, the proposed approach has a low specific energy consumption (45 kJ/g) and minimizes waste generation. The thermal behavior of PET and its degradation mechanism are systematically investigated using scanning electron microscopy and density functional theory-based calculations. The results obtained suggest that the proposed straightforward, swift, and energy-efficient strategy has the potential to offer a sustainable solution to plastic waste management challenges and expedite the industrialization of chemical recycling.

Integrating experimental and computational approaches for deep eutectic solvent-catalyzed glycolysis of post-consumer polyethylene terephthalate.

To achieve a sustainable and circular economy, developing effective plastic recycling methods is essential. Despite advances in the chemical recycling of plastic waste, modern industries require highly efficient and sustainable solutions to address environmental problems. In this study, we propose an efficient glycolysis strategy for post-consumer polyethylene terephthalate (PET) using deep eutectic solvents (DESs) to produce bis(2-hydroxyethyl) terephthalate (BHET) with high selectivity. Choline chloride (ChCl)- and urea-based DESs were synthesized using various metal salts and were tested for the glycolysis of PET waste; ChCl-Zn(OAc)2 exhibited the best performance. The DES-containing solvent system afforded a complete PET conversion, producing BHET at a high yield (91.6%) under optimal reaction conditions. The degradation mechanism of PET and its interaction with DESs were systematically investigated using density functional theory-based calculations. Furthermore, an intuitive machine learning model was developed to predict the PET conversion and BHET selectivity for different DES compositions. Our findings demonstrate that the DES-catalyzed glycolysis of post-consumer PET could enable the development of a sustainable chemical recycling process, providing insights to identify the new design of DESs for plastic decomposition.

Dissemination of sulfonamide resistance genes in digester microbiome during anaerobic digestion of food waste leachate.

The preeminence of sulfonamide drug resistance genes in food waste (FW) and the increased utilization of high-strength organic FW in anaerobic digestion (AD) to enhance methane production have raised severe public health concerns in wastewater treatment plants worldwide. In this regard, the dissemination patterns of different sulfonamide resistance genes (sul1 and sul2) and their impact on the digester core microbiota during AD of FW leachate (FWL) were evaluated. The presence of various sulfonamide antibiotics (SAs) in FWL digesters improved the final methane yield by 37 % during AD compared with FWL digesters without SAs. Microbial population shifts towards hydrolytic, acidogenic, and acetogenic bacteria in the phyla Actinobacteriota, Bacteroidota, Chloroflexi, Firmicutes, Proteobacteria, and Synergistota occurred due to SA induced substrate digestion and absorption through active transport; butanoate, propanoate, and pyruvate metabolism; glycolysis; gluconeogenesis; the citrate cycle; and pentose phosphate pathway. The initial dominance of Methanosaeta (89-96 %) declined to 47-53 % as AD progressed and shifted towards Methanosarcina (40 %) in digesters with the highest SA concentrations at the end of AD. Dissemination of sul1 depended on class 1 integron gene (intl1)-based horizontal gene transfer to pathogenic members of Chloroflexi, Firmicutes, and Patescibacteria, whereas sul2 was transmitted to Synergistota independent of intl1. Low susceptibility and ability to utilize SAs during methanogenesis shielded methanogenic archaea against selection pressure, thus preventing them from interacting with sul or intl1 genes, thereby minimizing the risk of antibiotic resistance development. The observed emergence of cationic antimicrobial peptide, vancomycin, and ß-lactam resistance in the core microbiota during AD of FWL in the presence of SAs suggests that multidrug resistance caused by bacterial transformation could lead to an increase in the environmental resistome through wastewater sludge treatment.

Syntrophic bacteria- and Methanosarcina-rich acclimatized microbiota with better carbohydrate metabolism enhances biomethanation of fractionated lignocellulosic biocomponents.

An inadequate lignocellulolytic capacity of a conventional anaerobic digester sludge (ADS) microbiota is the bottleneck for the maximal utilization of lignocellulose in anaerobic digestion. A well-constructed microbial consortium acclimatized to lignocellulose outperformed the ADS in terms of biogas productivity when fractionated biocomponents of rice straw were used to achieve a high methane bioconversion rate. A 33.3 % higher methane yield was obtained with the acclimatized consortium (AC) compared to that of ADS control. The dominant pair-wise link between Firmicutes (18.99-40.03 %), Bacteroidota (10.94-28.75 %), and archaeal Halobacteriota (3.59-20.57 %) phyla in the AC seed digesters indicated that the keystone members of these phyla were responsible for higher methane yield. A high abundance of syntrophic bacteria such as Proteiniphilum (1.22-5.19 %), Fermentimonas (0.71-5.31 %), Syntrophomonas (0.87-3.59 %), and their syntrophic partner Methanosarcina (4.26-18.80 %) maintained the digester stability and facilitated higher substrate-to-methane conversion in the AC seed digesters. The present combined strategy will help in boosting the 'biomass-to-methane" conversion.

Integrated hydrothermal and deep eutectic solvent-mediated fractionation of lignocellulosic biocomponents for enhanced accessibility and efficient conversion in anaerobic digestion.

Effective fractionation of lignocellulosic biocomponents of lignocellulosic biomass can increase its utilization in anaerobic digestion for high yield biomethane production. A hydrothermal process was optimized and integrated with a deep eutectic solvent (DES) pretreatment to preferentially fractionate hemicellulose, cellulose, and lignin in rice straw. The optimized hydrothermal process resulted in 96% hemicellulose solubilization at moderately low combined pretreatment severity (log S = 2.26), allowing increased hemicellulosic sugar recovery with minimal formation of inhibitory byproducts. Subsequent DES pretreatment resulted in highly bioaccessible cellulosic pulp, removing 81.3% of lignin that can be recovered and converted into value-added products. Anaerobic digestion of hemicellulosic fraction and cellulosic pulp using a microbial methanogenic consortium seed acclimatized to the lignocellulosic inhibitors resulted in a 33.4% higher yield of methane (467.84 mL g-1 VSinitial) than with anaerobic digester sludge seed. This integrated approach can facilitate and maximize the targeted utilization of different biocomponents through sustainable biorefining.

Syntrophic metabolism facilitates Methanosarcina-led methanation in the anaerobic digestion of lipidic slaughterhouse waste.

Different inoculum to slaughterhouse waste (SHW) ratios (Ino/SHW) influences the digester performance, substrate utilization, and methane yield through microbial shift and their metabolic syntrophy. Acetoclastic Methanosarcina (68-87%) was dominant in the exponential phase, overpowering the initial abundance of Methanosaeta (86% of methanogens) in the SHW digesters. Positive interactions among acetogenic and acetate-oxidizing species of Clostridium (11%) with Methanosarcina (84% of methanogens) improved the methanogenic activity (292 mL g-1 VSinitial d-1) and final VS utilization (90%) at the highest Ino/SHW loading. In contrast, significant improvement of methane yield (152% higher than the control) at the lowest Ino/SHW loading was attributed to strong syntrophy among Methanosaeta (24% of methanogens) and its exoelectrogenic partners, Bythopirellula (0.52%) and Mariniphaga (0.08%) and the acetogenic Cloacimonas (0.16%) and Longilinea (0.32%). These syntrophic interactions among the core microbiota induced major metabolic activities, including butanoate, glycine, serine and threonine, methane, propanoate, and pyruvate metabolism, and quorum sensing.

High-throughput integrated pretreatment strategies to convert high-solid loading microalgae into high-concentration biofuels.

The commercial feasibility of energy-efficient conversion of highly concentrated microalgal suspensions to produce high-titer biofuels is a major bottleneck due to high energy consumption. Herein, high-titer biofuels (bioethanol, higher-alcohols, and biodiesel) were generated from carbohydrate-rich Chlamydomonas mexicana and lipid-rich Chlamydomonas pitschmannii biomass through energy-saving microwave pretreatment, successive fermentation, and transesterification. Microwave pretreatment needed low specific energy (4.2 MJ/kg) for 100 g/L of microalgal suspension. Proposed sustainable integrated pretreatments method achieved unprecedented total conversion efficiency (67%) and highest biomass utilization (87%) of C. pitschmannii (100 g/L) with high yields of bioethanol (0.48 g-ethanol/g-carbohydrates), higher-alcohols (0.44 g-higher-alcohols/g-proteins), and biodiesel (0.90 g-biodiesel/g-lipids). Transmission electron microscopy showed the changes in the microalgal cellular integrity before and after sequential fermentations. Energy-efficient integrated pretreatments enhanced the extraction efficiency and whole utilization of high-concentration microalgae to generate high-titer biofuels with minimum waste production.

Rapid recovery of methane yield in organic overloaded-failed anaerobic digesters through bioaugmentation with acclimatized microbial consortium.

Acidification during anaerobic digestion (AD) due to organic overloading is one of the major reasons for process failures and decreased methane productivity in anaerobic digesters. Process failures can cause the anaerobic digesters to stall completely, prolong the digester recovery period, and inflict an increased operational cost on wastewater treatment plants and adverse impacts on the environment. This study investigated the efficacy of bioaugmentation by using acclimatized microbial consortium (AC) in recovering anaerobic digesters stalled due to acidosis. Overloading of digesters with food waste leachate (FWL) led to the accumulation of volatile fatty acids (11.30 g L-1) and a drop in pH (4.67), which resulted in process failure and a 22-fold decline in cumulative methane production compared to that in the initial phase. In the failure phase, the syntrophic and methanogenic activities of the anaerobic digester microbiota were disrupted by a significant decrease in the abundance of syntrophic populations such as Syntrophomonas, Syntrophorhabdus, Sedimentibacter, and Levilinea, and the phylum Euryarchaeota. Bioaugmentation of the failed digesters by adding AC along with the adjustment of pH resulted in the prompt recovery of methane productivity with a 15.7-fold higher yield than that in unaugmented control. The abundance of syntrophic bacteria Syntrophomonas and phylum Euryarchaeota significantly increased by 29- and 17-fold in the recovered digesters, respectively, which showed significant positive correlations with methane productivity. Methanosarcina and acetoclastic Methanosaeta played a major role in the recovery of the digesters; they were later replaced by hydrogenotrophic Methanoculleus. The increase in the abundance of genes associated with biomethanation contributed to digester recovery, according to the functional annotation of 16S rDNA amplicon data. Thus, bioaugmentation with AC could be a viable solution to recover digesters experiencing process failure due to organic overloading.

Biocomponent-based microalgal transformations into biofuels during the pretreatment and fermentation process.

Microalgal cell wall integrity and composition have a significant impact on the fermentation process and biofuel recovery. In this study, various biofuels (bioethanol, higher alcohols (C3-C5), and biodiesel) were produced by the fermentation of carbohydrates and proteins, and transesterification of lipids from three different microalgal strains (Pseudochlorella sp., Chlamydomonas mexicana, and Chlamydomonas pitschmannii), each possessing different proportions of bioconstituents (carbohydrates, proteins, and lipids). Changes in the cell wall structure and thickness were observed before and after fermentation using transmission electron microscopy. Pseudochlorella sp. showed the highest yields of bioethanol (0.45 g-ethanol/g-carbohydrates), higher alcohols (0.44 g-higher alcohols/g-proteins), and biodiesel (0.55 g-biodiesel/g-lipids), which consequently revealed a maximum energy recovery (42%) from whole constituents. This study suggests that different physiological properties, including cell wall thickness and the proportion of bioconstituents in microalgae, could have a significant impact on the pretreatment and fermentation efficiencies for biofuels production.

Energy-efficient pretreatments for the enhanced conversion of microalgal biomass to biofuels.

The physiological properties, including biochemical composition and cell wall thickness, of microalgal species have a remarkable effect on the pretreatment of biomass and its further conversion to biofuels. In the present study, multiple biofuels (bioethanol, higher alcohols (C3-C5), and biodiesel) were produced using energy-efficient microwave pretreatment, successive carbohydrate/protein fermentation, and lipid transesterification from three microalgal strains (Pseudochlorella sp., Chlamydomonas mexicana, and Chlamydomonas pitschmannii). The microwave pretreatment method required the lowest specific energy (5 MJ/kg) compared to ultrasound pretreatment. The proposed integrated approach achieved high conversion efficiency (46%) and maximum biomass utilization (93%) of C. mexicana with improved yields of bioethanol (0.46 g-ethanol/g-carbohydrates), higher alcohols (0.44 g-higher alcohols/g-proteins), and biodiesel (0.74 g-biodiesel/g-lipids). This study suggests that the application of an appropriate pretreatment method for microalgal strains having different physiological properties is essential for improving the extraction efficiency and conversion of biomass to biofuels with less waste production.