Non-targeted screening workflows for gas chromatography-high-resolution mass spectrometry analysis and identification of biomagnifying contaminants in biota samples.

The health of key species in the Baltic region has been impaired by exposure to anthropogenic hazardous substances (AHSs), which accumulate in organisms and are transferred through food chains. There is, thus, a need for comprehensive characterization of the occurrence and accumulation of AHSs in the ecosystem. In this study, we use a non-target screening (NTS) approach for this purpose. A major challenge in NTS of biological samples is the removal of matrix components such as lipids that may interfere with the detection and identification of compounds of interest. Here, we combine gel permeation chromatography with Florisil® column fractionation to achieve sufficient lipid removal for gas chromatography-high-resolution mass spectrometry analysis using electron ionization (EI) and electron capture negative ion chemical ionization (ECNI). In addition, we present new data processing workflows designed to systematically find and identify frequently occurring and biomagnifying AHSs, including known, emerging, and new contaminants. Using these workflows, we discovered a wide range of contaminants in tissue samples from blue mussels, fish, and marine mammals, and calculated their biomagnification factors (BMFs). Compounds with BMFs above 1 for herring and at least one marine mammal included legacy chlorinated pollutants (polychlorinated biphenyls, DDTs, chloro-benzenes/cyclohexanes, chlordanes, toxaphenes, dieldrin), polybrominated diphenyl ethers (PBDEs), and brominated biphenyls. However, there were also several halogenated natural products (halogenated methoxylated brominated diphenyl ethers, 1'-methyl-1,2'-bipyrroles, 1,1'-dimethyl-2,2'-bipyrroles, and the halogenated monoterpene mixed halogenated compound 1) as well as the novel flame retardant Dechlorane 602 and several polycyclic aromatic hydrocarbons, terpenoids, and steroids. The legacy pollutants exhibited the expected biomagnification behavior, demonstrating the utility of the unguided data processing workflow. Graphical abstract.

Will Climate Change Influence Production and Environmental Pathways of Halogenated Natural Products?

Thousands of halogenated natural products (HNPs) pervade the terrestrial and marine environment. HNPs are generated by biotic and abiotic processes and range in complexity from low molecular mass natural halocarbons (nHCs, mostly halomethanes and haloethanes) to compounds of higher molecular mass which often contain oxygen and/or nitrogen atoms in addition to halogens (hHNPs). nHCs have a key role in regulating tropospheric and stratospheric ozone, while some hHNPs bioaccumulate and have toxic properties similar those of anthropogenic-persistent organic pollutants (POPs). Both chemical classes have common sources: biosynthesis by marine bacteria, phytoplankton, macroalgae, and some invertebrate animals, and both may be similarly impacted by alteration of production and transport pathways in a changing climate. The nHCs scientific community is advanced in investigating sources, atmospheric and oceanic transport, and forecasting climate change impacts through modeling. By contrast, these activities are nascent or nonexistent for hHNPs. The goals of this paper are to (1) review production, sources, distribution, and transport pathways of nHCs and hHNPs through water and air, pointing out areas of commonality, (2) by analogy to nHCs, argue that climate change may alter these factors for hHNPs, and (3) suggest steps to improve linkage between nHCs and hHNPs science to better understand and predict climate change impacts.

Analysis of volatile organic compounds in indoor environments using thermal desorption with comprehensive two-dimensional gas chromatography and high-resolution time-of-flight mass spectrometry.

Building-related health effects are frequently observed. Several factors have been listed as possible causes including temperature, humidity, light conditions, presence of particulate matter, and microorganisms or volatile organic compounds. To be able to link exposure to specific volatile organic compounds to building-related health effects, powerful and comprehensive analytical methods are required. For this purpose, we developed an active air sampling method that utilizes dual-bed tubes loaded with TENAX-TA and Carboxen-1000 adsorbents to sample two parallel air samples of 4 L each. For the comprehensive volatile organic compounds analysis, an automated thermal desorption comprehensive two-dimensional gas chromatography high-resolution time-of-flight mass spectrometry method was developed and used. It allowed targeted analysis of approximately 90 known volatile organic compounds with relative standard deviations below 25% for the vast majority of target volatile organic compounds. It also allowed semiquantification (no matching standards) of numerous nontarget air contaminants using the same data set. The nontarget analysis workflow included peak finding, background elimination, feature alignment, detection frequency filtering, and tentative identification. Application of the workflow to air samples from 68 indoor environments at a large hospital complex resulted in a comprehensive volatile organic compound characterization, including 178 single compounds and 13 hydrocarbon groups.

The strength in numbers: comprehensive characterization of house dust using complementary mass spectrometric techniques.

Untargeted analysis of a composite house dust sample has been performed as part of a collaborative effort to evaluate the progress in the field of suspect and nontarget screening and build an extensive database of organic indoor environment contaminants. Twenty-one participants reported results that were curated by the organizers of the collaborative trial. In total, nearly 2350 compounds were identified (18%) or tentatively identified (25% at confidence level 2 and 58% at confidence level 3), making the collaborative trial a success. However, a relatively small share (37%) of all compounds were reported by more than one participant, which shows that there is plenty of room for improvement in the field of suspect and nontarget screening. An even a smaller share (5%) of the total number of compounds were detected using both liquid chromatography-mass spectrometry (LC-MS) and gas chromatography-mass spectrometry (GC-MS). Thus, the two MS techniques are highly complementary. Most of the compounds were detected using LC with electrospray ionization (ESI) MS and comprehensive 2D GC (GC×GC) with atmospheric pressure chemical ionization (APCI) and electron ionization (EI), respectively. Collectively, the three techniques accounted for more than 75% of the reported compounds. Glycols, pharmaceuticals, pesticides, and various biogenic compounds dominated among the compounds reported by LC-MS participants, while hydrocarbons, hydrocarbon derivatives, and chlorinated paraffins and chlorinated biphenyls were primarily reported by GC-MS participants. Plastics additives, flavor and fragrances, and personal care products were reported by both LC-MS and GC-MS participants. It was concluded that the use of multiple analytical techniques was required for a comprehensive characterization of house dust contaminants. Further, several recommendations are given for improved suspect and nontarget screening of house dust and other indoor environment samples, including the use of open-source data processing tools. One of the tools allowed provisional identification of almost 500 compounds that had not been reported by participants.

Evaluation of five filter media in column experiment on the removal of selected organic micropollutants and phosphorus from household wastewater.

A bench-scale column experiment was performed to study the removal of 31 selected organic micropollutants (MPs) and phosphorus by lignite, xyloid lignite (Xylit), granular activated carbon (GAC), Polonite® and sand over a period of 12 weeks. In total 29 out of the 31 MPs showed removal efficiency >90% by GAC with an average removal of 97 ±â€¯6%. Xylit and lignite were less efficient with an average removal of 80 ±â€¯28% and 68 ±â€¯29%, respectively. The removal efficiency was found to be impacted by the characterization of the sorbents and physicochemical properties of the compounds, as well as the interaction between the sorbents and compounds. For instance, Xylit and lignite performed well for relatively hydrophobic (log octanol/water partition coefficient (Kow) ≥3) MPs, while the removal efficiency of moderately hydrophilic, highly hydrophilic and negatively charged MPs were lower. The organic sorbents were found to have more functional groups at their surfaces, which might explain the higher adsorption of MPs to these sorbents. The removal of several MPs improved after four weeks in sand, Xylit, GAC and lignite which may be related to increased biological activity and biofilm development. GAC and sand had limited ability to remove phosphorus (12 ±â€¯27% and 14 ±â€¯2%, respectively), while the calcium-silicate material Polonite® precipitated phosphorus efficiently and increased the total phosphorus removal from 12% to 96% after the GAC filter.

Nontarget Screening and Time-Trend Analysis of Sewage Sludge Contaminants via Two-Dimensional Gas Chromatography-High Resolution Mass Spectrometry.

Nondestructive sample cleanup and comprehensive two-dimensional gas chromatography (GC×GC) high-resolution mass spectrometry (HRMS) analysis generated a massive amount of data that could be used for nontarget screening purposes. We present a data reduction and prioritization strategy that involves time-trend analysis of nontarget data. Sewage sludge collected between 2005 and 2015 in Stockholm (Sweden) was retrieved from an environmental specimen bank, extracted, and analyzed by GC×GC-HRMS. After data alignment features with high blank levels, artifacts and low detection frequency were removed. Features that appeared in four to six out of ten years were reprocessed to fill in gaps. The total number of compounds was reduced by more than 97% from almost 60 000 to almost 1500. The remaining compounds were analyzed for monotonic (log-linear) and nonmonotonic (smoother) time trends. In total, 192 compounds with log-linear trends and 120 compounds with nonmonotonic trends were obtained, respectively. Most compounds described by a log-linear trend exhibited decreasing trends and were traffic-related. Compounds with increasing trends included UV-filters, alkyl-phenols, and flavor and fragrances, which often could be linked to trade statistics. We have shown that nontarget screening and stepwise reduction of data provides a simple way of revealing significant changes in emissions of chemicals in society.

Retention-time prediction in comprehensive two-dimensional gas chromatography to aid identification of unknown contaminants.

Comprehensive two-dimensional (2D) gas chromatography (GC×GC) coupled to mass spectrometry (MS, GC×GC-MS), which enhances selectivity compared to GC-MS analysis, can be used for non-directed analysis (non-target screening) of environmental samples. Additional tools that aid in identifying unknown compounds are needed to handle the large amount of data generated. These tools include retention indices for characterizing relative retention of compounds and prediction of such. In this study, two quantitative structure-retention relationship (QSRR) approaches for prediction of retention times (1tR and 2tR) and indices (linear retention indices (LRIs) and a new polyethylene glycol-based retention index (PEG-2I)) in GC × GC were explored, and their predictive power compared. In the first method, molecular descriptors combined with partial least squares (PLS) analysis were used to predict times and indices. In the second method, the commercial software package ChromGenius (ACD/Labs), based on a "federation of local models," was employed. Overall, the PLS approach exhibited better accuracy than the ChromGenius approach. Although average errors for the LRI prediction via ChromGenius were slightly lower, PLS was superior in all other cases. The average deviations between the predicted and the experimental value were 5% and 3% for the 1tR and LRI, and 5% and 12% for the 2tR and PEG-2I, respectively. These results are comparable to or better than those reported in previous studies. Finally, the developed model was successfully applied to an independent dataset and led to the discovery of 12 wrongly assigned compounds. The results of the present work represent the first-ever prediction of the PEG-2I. Graphical abstract ᅟ.

Methodology for non-target screening of sewage sludge using comprehensive two-dimensional gas chromatography coupled to high-resolution mass spectrometry.

To investigate the wide range of pollutants occurring in sewage sludge, an analytical method for comprehensive non-target screening is needed. To the best of our knowledge, no procedures currently exist for the full screening of organic contaminants in sewage sludge, which is the ultimate goal of this project. We developed non-discriminating sample preparation methods for gas chromatography-mass spectrometry (GC-MS) analysis. Pressurized liquid extraction (PLE) was used for extraction, with in-line (silica gel selective PLE, SPLE) or off-line clean-up (gel permeation chromatography, GPC). This combination allowed the analysis of non-polar compounds of all sizes and small semi-polar and non-polar compounds. The results show that the combination of SPLE and PLE with GPC is suitable for analysis of established as well as new contaminants. Both methods were validated for 99 compounds with different properties. For all GC suitable analytes, either one of the methods produced acceptable recoveries (64 to 136%). As a test, the two methods were used for non-target screening of Swedish sewage sludge. A tiered approach was used to tentatively identify the sludge contaminants. In total, 1865 and 1593 compounds were found of which 321 and 192 compounds were tentatively identified for the PLE and SPLE method, respectively. For a comprehensive coverage of contaminants, the two methods should be used together, with the PLE method covering a wider polarity range and the SPLE method a wider size range. In addition, polar substances will require liquid chromatography-mass spectrometry analysis, the method for which will be developed soon.

Contribution of precursor compounds to the release of per- and polyfluoroalkyl substances (PFASs) from waste water treatment plants (WWTPs).

Per- and polyfluoroalkyl substances (PFASs) are ubiquitous in sludge and water from waste water treatment plants, as a result of their incorporation in everyday products and industrial processes. In this study, we measured several classes of persistent PFASs, precursors, transformation intermediates, and newly identified PFASs in influent and effluent sewage water and sludge from three municipal waste water treatment plants in Sweden, sampled in 2015. For sludge, samples from 2012 and 2014 were analyzed as well. Levels of precursors in sludge exceeded those of perfluoroalkyl acids and sulfonic acids (PFCAs and PFSAs), in 2015 the sum of polyfluoroalkyl phosphoric acid esters (PAPs) were 15-20ng/g dry weight, the sum of fluorotelomer sulfonic acids (FTSAs) was 0.8-1.3ng/g, and the sum of perfluorooctane sulfonamides and ethanols ranged from non-detected to 3.2ng/g. Persistent PFSAs and PFCAs were detected at 1.9-3.9ng/g and 2.4-7.3ng/g dry weight, respectively. The influence of precursor compounds was further demonstrated by an observed substantial increase for a majority of the persistent PFCAs and PFSAs in water after waste water treatment. Perfluorohexanoic acid (PFHxA), perfluorooctanoic acid (PFOA), perfluorohexane sulfonic acid (PFHxS), and perfluorooctane sulfonic acid (PFOS) had a net mass increase in all WWTPs, with mean values of 83%, 28%, 37% and 58%, respectively. The load of precursors and intermediates in influent water and sludge combined with net mass increase support the hypothesis that degradation of precursor compounds is a significant contributor to PFAS contamination in the environment.

Dissolved organic carbon quality and sorption of organic pollutants in the Baltic Sea in light of future climate change.

Regional climate change scenarios predict increased temperature and precipitation in the northern Baltic Sea, leading to a greater runoff of fresh water and terrestrial dissolved organic carbon (DOC) within the second part of the 21st century. As a result, the current north to south gradient in temperature and salinity is likely to be shifted further toward the south. To examine if such climate change effects would cause alterations in the environmental fate of organic pollutants, spatial variations of DOC quality and sorption behavior toward organic contaminants were examined using multiple analytical methods. The results showed declining contents of aromatic functional groups in DOC along a north to south gradient. Similarly, the sorption of a diverse set of organic contaminants to DOC also showed spatial differences. The sorption behavior of these contaminants was modeled using poly parameter linear energy relationships. The resulting molecular descriptors indicated clear differences in the sorption properties of DOC sampled in northern and southern parts of the Baltic Sea, which imply that more organic contaminants are sorbed to DOC in the northern part. The extent of this sorption process determines whether individual contaminants will partition to biota via direct uptake or through sorption to DOC, which serves as food source for bacteria-based food-webs.

Non-target screening with high-resolution mass spectrometry: critical review using a collaborative trial on water analysis.

In this article, a dataset from a collaborative non-target screening trial organised by the NORMAN Association is used to review the state-of-the-art and discuss future perspectives of non-target screening using high-resolution mass spectrometry in water analysis. A total of 18 institutes from 12 European countries analysed an extract of the same water sample collected from the River Danube with either one or both of liquid and gas chromatography coupled with mass spectrometry detection. This article focuses mainly on the use of high resolution screening techniques with target, suspect, and non-target workflows to identify substances in environmental samples. Specific examples are given to emphasise major challenges including isobaric and co-eluting substances, dependence on target and suspect lists, formula assignment, the use of retention information, and the confidence of identification. Approaches and methods applicable to unit resolution data are also discussed. Although most substances were identified using high resolution data with target and suspect-screening approaches, some participants proposed tentative non-target identifications. This comprehensive dataset revealed that non-target analytical techniques are already substantially harmonised between the participants, but the data processing remains time-consuming. Although the objective of a "fully-automated identification workflow" remains elusive in the short term, important steps in this direction have been taken, exemplified by the growing popularity of suspect screening approaches. Major recommendations to improve non-target screening include better integration and connection of desired features into software packages, the exchange of target and suspect lists, and the contribution of more spectra from standard substances into (openly accessible) databases. Graphical Abstract Matrix of identification approach versus identification confidence.

Air-water exchange of brominated anisoles in the northern Baltic Sea.

Bromophenols produced by marine algae undergo O-methylation to form bromoanisoles (BAs), which are exchanged between water and air. BAs were determined in surface water of the northern Baltic Sea (Gulf of Bothnia, consisting of Bothnian Bay and Bothnian Sea) during 2011-2013 and on a transect of the entire Baltic in September 2013. The abundance decreased in the following order: 2,4,6-tribromoanisole (2,4,6-TBA)>2,4-dibromoanisole (2,4-DBA)≫2,6-dibromoanisole (2,6-DBA). Concentrations of 2,4-DBA and 2,4,6-TBA in September were higher in the southern than in the northern Baltic and correlated well with the higher salinity in the south. This suggests south-to-north advection and dilution with fresh riverine water enroute, and/or lower production in the north. The abundance in air over the northern Baltic also decreased in the following order: 2,4,6-TBA>2,4-DBA. However, 2,6-DBA was estimated as a lower limit due to breakthrough from polyurethane foam traps used for sampling. Water/air fugacity ratios ranged from 3.4 to 7.6 for 2,4-DBA and from 18 to 94 for 2,4,6-TBA, indicating net volatilization. Flux estimates using the two-film model suggested that volatilization removes 980-1360 kg of total BAs from Bothnian Bay (38000 km2) between May and September. The release of bromine from outgassing of BAs could be up to 4-6% of bromine fluxes from previously reported volatilization of bromomethanes and bromochloromethanes.

Pesticide screening of surface water and soil along the Mekong River in Cambodia.

Widespread use of pesticides globally has led to serious concerns about environmental contamination, particularly with regard to aquatic and soil ecosystems. This work involved investigating concentrations of 64 pesticides in surface-water and soil samples collected in four provinces along the Mekong River in Cambodia during the dry and rainy seasons (276 samples in total), and conducting semi-structured interviews with local farmers about pesticide use. Furthermore, an ecological risk assessment of the detected pesticides was performed. In total, 56 pesticides were detected in surface water and 43 in soil, with individual pesticides reaching maximum concentrations of 1300 ng/L in the surface-water samples (tebufenozide) and 1100 ng/g dry weight in the soil samples (bromophos-ethyl). The semi-structured interviews made it quite evident that the instructions that farmers are provided regarding the use of pesticides are rudimentary, and that overuse is common. The perceived effect of pesticides was seen as an end-point, and there was a limited process of optimally matching pesticides to pests and crops. Several pesticides were used regularly on the same crop, and the period between application and harvest varied. Risk analysis showed that bromophos-ethyl, dichlorvos, and iprobenfos presented a very high risk to aquatic organisms in both the dry and rainy seasons, with risk quotient values of 850 for both seasons, and of 67 in the dry season and 78 in the rainy season for bromophos-ethyl, and 49 in the dry season and 16 in the rainy season for dichlorvos. Overall, this work highlights the occurrence of pesticide residues in surface water and soil along the Mekong River in Cambodia, and emphasizes the urgent need for monitoring and improving pesticide practices and regulations in the region.

Concentrations of potentially endocrine disrupting chemicals in car cabin air and dust - Effect of temperature and ventilation.

Materials in car cabins contain performance-enhancing semi-volatile organic compounds (SVOCs). As these SVOCs are not chemically bound to the materials, they can emit from the materials at slow rates to the surrounding, causing human exposure. This study aimed at increasing the understanding on abundance of SVOCs in car cabins by studying 18 potential endocrine disrupting chemicals in car cabin air (gas phase and airborne particles) and dust. We also studied how levels of these chemicals varied by temperature inside the car cabin along with ventilation settings, relevant to human exposure. A positive correlation was observed between temperature and SVOC concentration in both the gas and the particle phase, where average gas phase levels at 80 °C were a factor of 18-16,000 higher than average levels at 25 °C, while average particle phase levels were a factor of 4.6-40,000 higher for the studied substances. This study also showed that levels were below the limit of detection for several SVOCs during realistic driving conditions, i.e., with the ventilation activated. To limit human exposure to SVOCs in car cabins, it is recommended to ventilate a warm car before entering and have the ventilation on during driving, as both temperature and ventilation have a significant impact on SVOC levels.

Temporal trends of lipophilic organic contaminants in blue mussel (1994-2017) and eelpout (1994-2017) from the southern Baltic Sea.

A time-trend study was carried out for two important Baltic Sea species, blue mussel (1994-2017, 11 samples) and eelpout (1994-2017, 11 samples), to track the changes in levels of regulated persistent organic pollutants (POPs) and show potential increases in the levels of the contaminants of emerging concern (CECs). It was carried out utilizing gas chromatography-high-resolution mass spectrometry (GC-HRMS) based non-target screening (NTS). Data were acquired in two modes - electron ionization (EI) and electron capture negative ion chemical ionization (ECNI) - to widen the contaminant coverage, and treated using a fast semi-automated NTS data processing workflow. The study revealed that >250 tentatively identified compounds show statistically significant temporal trends in Baltic blue mussel and eelpout. A large number of regulated substances, including but not limited to PCBs, DDTs and other organochlorine pesticides (OCPs), chlorobenzenes, and many polybrominated diphenyl ethers (PBDEs), showed significant declining trends, as was expected. Their rates of decline were in good agreement with previously reported data. In contrast, increasing trends were observed for many CECs, some polycyclic aromatic compounds (PAHs), and hydrocarbons. The CEC group included, among others, four compounds, namely, one personal care product ingredient, 2-ethylhexyl stearate, one brominated compound 1,2,3,5-tetrabromobenzene and two intermediates 4-isopropoxyaniline and bilobol dimethyl ether, that were reported in marine biota for the first time to the best of our knowledge. Several compounds, including four CECs and two unknown brominated compounds, showed levels considerably higher than the common legacy pollutants (CB-153 and BDE-99), which might be taken into consideration for future monitoring and risk assessment. In addition, this work revealed the presence of a plethora of organoiodinated compounds that exhibited statistically significant temporal trends in the samples under study, which could be of future interest.

What is in the fish? Collaborative trial in suspect and non-target screening of organic micropollutants using LC- and GC-HRMS.

A collaborative trial involving 16 participants from nine European countries was conducted within the NORMAN network in efforts to harmonise suspect and non-target screening of environmental contaminants in whole fish samples of bream (Abramis brama). Participants were provided with freeze-dried, homogenised fish samples from a contaminated and a reference site, extracts (spiked and non-spiked) and reference sample preparation protocols for liquid chromatography (LC) and gas chromatography (GC) coupled to high resolution mass spectrometry (HRMS). Participants extracted fish samples using their in-house sample preparation method and/or the protocol provided. Participants correctly identified 9-69 % of spiked compounds using LC-HRMS and 20-60 % of spiked compounds using GC-HRMS. From the contaminated site, suspect screening with participants' own suspect lists led to putative identification of on average ∼145 and ∼20 unique features per participant using LC-HRMS and GC-HRMS, respectively, while non-target screening identified on average ∼42 and ∼56 unique features per participant using LC-HRMS and GC-HRMS, respectively. Within the same sub-group of sample preparation method, only a few features were identified by at least two participants in suspect screening (16 features using LC-HRMS, 0 features using GC-HRMS) and non-target screening (0 features using LC-HRMS, 2 features using GC-HRMS). The compounds identified had log octanol/water partition coefficient (KOW) values from -9.9 to 16 and mass-to-charge ratios (m/z) of 68 to 761 (LC-HRMS and GC-HRMS). A significant linear trend was found between log KOW and m/z for the GC-HRMS data. Overall, these findings indicate that differences in screening results are mainly due to the data analysis workflows used by different participants. Further work is needed to harmonise the results obtained when applying suspect and non-target screening approaches to environmental biota samples.

Formation of environmentally relevant brominated dioxins from 2,4,6,-tribromophenol via bromoperoxidase-catalyzed dimerization.

Polybrominated dibenzo-p-dioxins (PBDD) are emerging environmental pollutants with structural similarities to the highly characterized toxicants polychlorinated dibenzo-p-dioxins. The geographical and temporal variations of PBDD in biota samples from the Baltic Sea do not display features that are normally related to anthropogenic sources such as incineration, and therefore the natural formation of PBDDs has been suggested. This study of the bromoperoxidase mediated oxidative coupling of 2,4,6-tribromophenol (an abundant substance that is naturally formed in marine systems) identified the formation of ppb-level yields of 1,3,6,8-tetrabromodibenzo-p-dioxin (1,3,6,8-TeBDD) through direct condensation. Additional TeBDDs (1,3,7,9-TeBDD, 1,2,4,7-TeBDD, and/or 1,2,4,8-TeBDD) and tri-BDDs (1,3,7-TrBDD and 1,3,8-TrBDD) were frequently formed but at lower yields. The formation of these TeBDDs probably proceeds via bromine shifts or Smiles rearrangements, whereas the TrBDDs may result from subsequent debromination processes. Because all of the congeners formed by oxidative coupling and subsequent reactions are also found in Baltic Sea biota, the results support the theory that PBDDs are formed from natural precursors.

Photochemical formation of polybrominated dibenzo-p-dioxins from environmentally abundant hydroxylated polybrominated diphenyl ethers.

High levels of polybrominated dibenzo-p-dioxins (PBDDs) have been found in Baltic Sea biota, where the toxic load owing to, for example, polychlorinated dibenzo-p-dioxins and other organic pollutants is already high. The levels and geographic pattern of PBDDs suggest biogenic rather than anthropogenic origin, and both biotic and abiotic formation pathways have been proposed. Photochemical formation from hydroxylated polybrominated diphenyl ethers (OH-PBDE) is a proposed pathway for PBDDs in marine environments. Ultraviolet radiation-initiated transformations of OH-BDEs 47, 68, 85, 90, 99, and 123, which all are abundant in the environment, were investigated. It was shown that the most abundant PBDDs in the environment (1,3,7-triBDD and 1,3,8-triBDD) can be formed from the most abundant OH-BDEs (OH-BDE 47 and OH-BDE 68) at high rates and with percentage yields. In fact, most of the PBDDs that have been identified in the Baltic Sea environment were formed with high yield from the six studied OH-PBDE, through initial cyclization and subsequent debromination reactions. The high formation yields point to this route as an important source of PBDDs in biota. However, congeners showing relatively high retention in fish, specifically 1,3,6,8- and 1,3,7,9-tetraBDD, were not formed. These are likely formed by enzymatic coupling of brominated phenols.

Characterization of AhR agonist compounds in roadside snow.

Aryl hydrocarbon receptor (AhR) agonistic contaminants were identified in roadside snow samples. Snow was collected in Oslo, Norway, and compared to a background sample collected from a mountain area. The water and particulate fractions were analysed for AhR agonists using a dioxin-responsive, chemically activated luciferase expression (CALUX) cell assay and by gas chromatography coupled to high-resolution time-of-flight mass spectrometry with targeted analysis for polycyclic aromatic hydrocarbons (PAHs) and broad-spectrum non-target analysis. The AhR agonist levels in the dissolved fractions in the roadside samples were between 15 and 387 pg/L CALUX toxic equivalents (TEQ(CALUX)). An elevated AhR activity of 221 pg TEQ(CALUX) per litre was detected in the mountain sample. In the particle-bound fractions, the TEQ(CALUX) was between 1,350 and 7,390 pg/L. One possible explanation for the elevated levels in the dissolved fraction of the mountain sample could be the presence of black carbon in the roadside samples, potentially adsorbing dioxin-like compounds and rendering them unavailable for AhR interaction. No polychlorinated dibenzodioxins and dibenzofurans or polychlorinated biphenyls were detected in the samples; the occurrence of PAHs, however, explained up to 9 % of the AhR agonist activity in the samples, whilst comprehensive two-dimensional gas chromatography coupled to mass spectrometry GCxGC-ToF-Ms identified PAH derivatives such as polycyclic aromatic ketones and alkylated, nitrogen sulphur and oxygen PAHs in the particle fractions. The (large) discrepancy between the total and explained activity highlights the fact that there are other as yet unidentified AhR agonists present in the environment.

Comprehensive non-target screening of biomagnifying organic contaminants in the Baltic Sea food web.

High-resolution mass spectrometry (HRMS) based non-target screening (NTS) is a powerful approach for the simultaneous determination of multiple environmental contaminant classes in complex biota samples. In this study, trophic biomagnification factor (TMF) directed NTS was performed to find and (tentatively) identify known, emerging, and new chemical contaminants that are persistent and biomagnify in Baltic Sea biota. The investigated food web included seven species: one filter feeder (blue mussel, Mytilus edulis), two fish (eelpout, Zoarces viviparous; herring, Clupea harengus), two marine mammals (harbor porpoise, Phocoena phocoena; grey seal, Halichoerus grypus) and two birds (guillemot, Uria aalge; white-tailed sea eagle, Haliaeetus albicilla). The NTS procedure included extraction with organic solvent mixtures, two-step high-resolution gel permeation chromatography clean-up, Florisil® fractionation, gas chromatography (GC) HRMS analysis in electron ionization (EI) and electron capture negative ion chemical ionization (ECNI) modes, and NTS data processing. The latter was performed differently for the EI and ECNI data: the EI data were treated using a flexible and highly automated TMF-directed NTS workflow, whereas the ECNI data were treated with a simpler and less automated workflow that specifically screened for brominated compounds. The two workflows collectively revealed biomagnification (statistically significant TMF values) of >250 tentatively identified compounds, including legacy persistent organic pollutants (POPs), such as PCBs and PCB-related compounds, DDT and its metabolites, and organochlorine pesticides (OCPs), contaminants of emerging concern (CECs), and halogenated natural products (HNPs). Among the tentatively identified CECs, nine have not previously been reported in environmental biota samples. These included four polymer additives (used as antioxidants, rubber additives or plasticizers) and two cosmetic product additives (ethyl myristate and isopropyl palmitate). The CECs should be prioritized for future structure verification and quantification using reference standards.