Drug-induced sleep endoscopy improves intervention efficacy among patients treated for obstructive sleep apnea with a mandibular advancement device.

PURPOSE: To compare the short-term treatment effect of a mandibular advancement device (MAD) with and without previous drug-induced sleep endoscopy (DISE) on polysomnography (PSG) and other sleep apnea-related treatment outcomes (Short Form Health Survey [SF-36] and Epworth Sleepiness Scale [ESS]) among adults with mild, moderate, and severe obstructive sleep apnea (OSA). We hypothesized that using DISE would improve the efficacy of MADs on the sleep apnea parameters. METHODS: The study sample consisted of patients with OSA who were unable or unwilling to tolerate a CPAP device, divided into an experimental (with DISE) and a control (without DISE) group. RESULTS: Of 50 patients with OSA, 40 men (80%), mean age was 48.8 ± 12,3 years. The mean apnea-hypopnea index (AHI) score of both groups decreased significantly between baseline and the 8-week follow-up titration PSG with MAD in situ, from 31.7 ± 17.3 (mean ± SD) apnea-hypopnea episodes/h to 7.0 ± 6.4/h (p < 0.0001) in the experimental group, and from 22.5 ± 16.6 episodes/h to 11.4 ± 8.0/h (p < 0.024) in the control group. Capillary oxygen saturation (SpO2) levels did not change significantly between the two timepoints for either group. The SF-36 (p < 0.023) and ESS (p < 0.036) results of both groups improved significantly between baseline and the 8-week follow-up after starting MAD treatment; however, the improvement in quality of life was significantly more pronounced in the experimental group than in the control group (p < 0.0001). CONCLUSION: DISE provides a significant benefit to patients with OSA undergoing MAD treatment. It can be used as a valuable prediction tool in clinical practice for the management of patients with OSA, even those with moderate and severe disease.

Sociomedical and oral factors affecting masticatory performance in an older population.

OBJECTIVES: To assess the sociomedical and oral factors affecting masticatory performance in a community-dwelling older population. MATERIALS AND METHODS: Community-dwelling persons over 60 years were investigated using medical and dental oral interviews, oral and denture examination (natural teeth, tooth mobility, number of occluding tooth pairs, and removable dentures' prevalence and quality), and evaluation of masticatory performance using a mixing ability test. RESULTS: A total of 130 participants with a mean age of 73.9±8.5 years were recorded. Fifty-eight (44.6%) used various types of removable prostheses. Twenty were edentulous and used a pair of complete dentures. Univariate analyses revealed statistically significant associations (p≤0.05) between masticatory performance and aging, marital status, subjective chewing ability, use of removable dentures, use of various combinations of complete dentures, pain caused by maxillary denture, number of teeth, tooth mobility, posterior chewing pairs, all chewing contacts natural or prosthetic, retention of mandibular partial dentures, and dentures' occlusion. The multivariable quantile regression analysis revealed that fewer natural teeth (95% CI: -0.02-0.01, p<0.001), being edentulous and using a pair of complete dentures (95% CI: 0.09-0.35, p=0.001), and larger percentage of severely mobile teeth (95% CI: 0.07-0.82, p=0.020) were associated with lower masticatory performance. CONCLUSIONS: Poor masticatory performance in older adults was associated with fewer teeth, being edentulous and using a pair of complete dentures, and increased prevalence of severe tooth mobility. CLINICAL RELEVANCE: Retaining the natural dentition and preventing and treating periodontal disease are important measures to maintain masticatory performance in older adults.

Oral factors and adherence to Mediterranean diet in an older Greek population.

PURPOSE: The aim of this study was to investigate the effect of oral factors on adherence to the Mediterranean diet in an older population METHODS: 130 persons over 60 years visiting Open Care Community Centers for Older People participated in this study. Oral interviews recorded demographic and sociomedical information, subjective oral complaints, and dental habits. Adherence to Mediterranean diet was assessed using the MDI_BNC4H index (range: 0-14). An oral examination was performed, and evaluation of the masticatory performance was carried out using a two-color chewing gum that was digitally analysed. RESULTS: The mean age of the study participants was 73.9 ± 8.5 years. The score of adherence to the Mediterranean diet ranged from 3 to 9 (5.6 ± 1.4). 58 participants used removable prostheses, while 20 used a pair of complete dentures. Univariate analyses revealed that the parameters that negatively significantly, or marginally significantly, affected the level of adherence to the Mediterranean diet were lower masticatory performance (p = 0.050), larger number of drugs per day (p = 0.056), higher BMI (p = 0.043) and smoking (p = 0.053). The multivariable analysis revealed that lower adherence to the Mediterranean diet was significantly associated with higher BMI (p = 0.047) and lower masticatory performance (p = 0.050). CONCLUSIONS: Increased masticatory performance was an independent predictor of better adherence to the Mediterranean diet in an older population.

A randomized, 3-month, parallel-group clinical trial to compare the efficacy of electric 3-dimensional toothbrushes vs manual toothbrushes in maintaining oral health in patients with fixed orthodontic appliances.

INTRODUCTION: The aim of this single-blinded, parallel-group, randomized clinical trial was to compare the efficacy of electric 3-dimensional (3D) toothbrushes and manual toothbrushes in removing plaque and reducing gingival inflammation in orthodontic patients. METHODS: Eighty adolescents with fixed orthodontic appliances in both arches were randomized at a 1:1 ratio, with an equal number of both sexes, in this examiner blinded, parallel clinical trial. Eligibility criteria included subjects aged between 12 and 16 years, good general health, nonextraction orthodontic treatment, and plaque-induced gingivitis, excluding patients with active caries or periodontitis, tooth agenesis, syndromes, disabilities, and craniofacial deformities, ≥2 cervical and/or proximal fillings, dental prostheses or dental implants, and subjects smoking or using antibiotics or medication predisposing to gingival enlargement. Patients were assigned to use either an electric 3D orthodontic toothbrush (Oral-B Pro-1000 with Oral-B Ortho head; Procter & Gamble, Cincinnati, Ohio) or a manual toothbrush (Oral-B Orthodontic brush; Procter & Gamble) and instructed to brush twice daily for 2 minutes. The main outcomes were: (1) plaque removal, assessed with the Modified Silness and Löe plaque index and the Modified Full Mouth Plaque Score, and (2) gingival inflammation reduction, assessed with the Modified Silness and Löe Gingival Index and the Modified Simplified Gingival Index. Measurements were taken at baseline, 1, 2, and 3 months. Randomization was achieved with 2 random sequences, one for each brush, written and sealed in opaque numbered envelopes. Blinding was possible for outcome assessment only. RESULTS: Considerable variability was observed among patients in the values of all dependent variables. There was no difference between interventions over time for any of the outcomes, and the main effects for treatment and time were also not statistically significant. For Modified Silness and Löe plaque index, the interaction was 0.001 (95% confidence interval, -0.011 to 0.013; P = 0.89). CONCLUSIONS: No difference in plaque removal efficacy and gingival inflammation reduction was found between the electric 3D and manual toothbrushes in adolescents with fixed orthodontic appliances. Therefore, orthodontists should focus on enhancing their patients' dental awareness and oral hygiene, along with professional prophylaxis and other oral hygiene aids, independently of the brush used. REGISTRATION: This trial was registered at ClinicalTrials.gov (Identifier: NCT02699931). PROTOCOL: The protocol was not published before trial commencement. FUNDING: Electric and manual toothbrushes and toothpastes for all participants were provided by Procter & Gamble (Oral-B). Miscellaneous costs were covered by the participating departments.

Relapse 1 week after bracket removal: a 3D superimpositional analysis.

OBJECTIVES: To measure tooth movement 1 week post-treatment and assess potential correlation with changes invoked during treatment. SUBJECTS AND METHODS: Thirty-eight patients were recruited (19 males, 19 females). Polyvinyl siloxane impressions were taken after bracket debonding (T1) and 1 week later (T2) and digitally scanned. During this period no retention was used. The digital casts were superimposed on structures of the hard palate. Translation and rotation of the first molars, canines, and central incisors were recorded. Additionally, movement of these teeth was assessed from the beginning (T0) until the end of treatment (T1). The correlation between the post-treatment relapse (T1-T2) and tooth movement during treatment (T0-T1) was investigated via the Spearman correlation coefficient. RESULTS: Relapse was detected and reflected changes in tooth position during treatment. For the first molars (right, left) the correlation between treatment and post-treatment tooth movement was evident in the transverse direction (r = -0.38, P = 0.020; r = -0.32, P = 0.052), tipping (r = -0.40, P = 0.015; r = -0.34, P = 0.034) and the antero-posterior direction (r = -0.31, P = 0.061; r = -0.36, P = 0.027); for the canines (right and left), as rotation around their long axis (r = -0.55, P = 0.003; r = -0.58, P = 0.002); for central incisors (right and left) in the antero-posterior direction (r = -0.55, P = 0.000; r = -0.48, P = 0.03), transverse direction (r = -0.43, P = 0.07; r = -0.32, P = 0.047), and rotation around their long axis (r = -0.53, P = 0.001; r = -0.28, P = 0.089). CONCLUSIONS: Post-treatment changes in tooth position were mostly related to tooth movement during treatment. The reported correlations may help clinicians predict short-term relapse, evaluate long-term retention need, and design individualized retention schemes.

A geometric morphometric evaluation of hard and soft tissue profile changes in borderline extraction versus non-extraction patients.

OBJECTIVES: To evaluate the hard tissue and facial profile changes in matched extraction and non-extraction Class I patients by the use of geometric morphometrics. SUBJECTS AND METHODS: From a parent sample of 542 Class I patients, previously subjected to discriminant analysis, a subsample of 68 borderline cases was obtained, 34 treated with extraction and 34 without extraction of 4 first premolars. Geometric morphometric methods (Procrustes superimposition and Principal Component Analysis) were applied on cephalometric tracings to assess the validity of the discriminant analysis in successfully identifying a morphologically homogeneous group and to evaluate inter- and intra-group skeletal and facial profile shape changes. RESULTS: No significant pre-treatment shape difference between the two groups was found, thus validating the discriminant analysis. The non-extraction group showed increase in hard tissue facial height (P < 0.001), with slight lower lip retrusion and upper lip protrusion (P = 0.027). The extraction group showed retraction of the hard tissue and facial profile outline (P < 0.001). Permutation tests for post-treatment inter-group differences resulted in P = 0.054 for the soft tissue outline and P = 0.078 for the hard tissue skeletal component. CONCLUSIONS: The evidence indicates that borderline cases treated with four premolar extractions will exhibit lip retrusion compared to non-extraction treatment.

Craniofacial shape differs in patients with tooth agenesis: geometric morphometric analysis.

AIM: To evaluate the shape of the craniofacial complex in patients with tooth agenesis and compare it to matched controls. SUBJECTS AND METHODS: The sample comprised 456 patients that were allocated to three groups: the agenesis group of 100 patients with at least one missing tooth, excluding third molars, the third molar agenesis group (3dMAG; one to four missing third molars) of 52 patients and the control group (CG) of 304 patients with no missing teeth. The main craniofacial structures depicted on lateral cephalograms were digitized and traced with 15 curves and 127 landmarks. These landmarks were subjected to Procrustes superimposition and principal component analysis in order to describe shape variability of the cranial base, maxilla and mandible, as well as of the whole craniofacial complex. For statistical analysis, permutation tests were used (10 000 permutations without replacement). RESULTS: Approximately half of the sample's variability was described by the first three principal components. Comparisons within the whole sample revealed sexual dimorphism of the craniofacial complex and its structures (P < 0.01). Differences between the agenesis group and matched controls were found in the shape of all craniofacial structures except for the cranial base (P < 0.05). Specifically, patients with agenesis presented with Class III tendency and hypodivergent skeletal pattern. However, the comparison between the 3dMAG and matched CG revealed no differences. CONCLUSION: The shape of the craniofacial complex differs in patients with tooth agenesis suggesting that common factors are implicated in tooth development and craniofacial morphology.

Morphometric covariation between palatal shape and skeletal pattern in children and adolescents: a cross-sectional study.

OBJECTIVE: To assess shape covariation of the palate and craniofacial complex (CFC) in children and adolescents. METHODS: Pre-treatment lateral cephalometric radiographs and corresponding maxillary casts of 100 children (8-10 years) and 100 adolescents (15-20 years) were digitized. Exclusion criteria were previous orthodontic treatment, craniofacial syndromes, mouth breathing, finger sucking, crossbite, tooth agenesis, and tooth impaction. Palatal shape was described with 239 surface and curve semilandmarks and craniofacial shape with 10 fixed landmarks and 117 curve semilandmarks. Procrustes superimposition and principal component analysis were applied for evaluation of shape variability. Shape covariation between palate and CFC was assessed with partial least squares analysis. RESULTS: The first five principal components explained 77 per cent (palate) and 60 per cent (CFC) of total shape variability. The palate varied mainly in height (adolescent group) and width-length (both groups), whereas the CFC varied mainly in the vertical dimension. Significant covariation was found between the craniofacial and palatal components (RV coefficient: 0.27, children; RV: 0.23, adolescents). Variation of the CFC in the vertical and anteroposterior direction was mainly related to variation in the height-width and the width-length ratio of the palate, respectively. LIMITATIONS: The use of lateral cephalometric radiographs eliminated the transverse dimension from the craniofacial shape analysis. The study was cross-sectional, so the observed intergroup differences should be interpreted with caution. CONCLUSIONS: Covariation strength and pattern were similar in children and adolescents. The closer a subject was to the high-angle end of the variability spectrum, the higher and narrower was the palate, and conversely.

Geometric morphometric analysis of craniofacial growth between the ages of 12 and 14 in normal humans.

AIM: There is great variation of growth among individuals. The question whether patients with different skeletal discrepancies grow differently is biologically interesting but also important in designing clinical trials. The aim of the present study was to evaluate whether growth direction depends on the initial craniofacial pattern. SUBJECTS AND METHOD: The sample consisted of 350 lateral cephalograms of 175 subjects (91 females and 84 males) followed during normal growth without any orthodontic treatment. The examined ages were 12 (T1) and 14 (T2) years. The cephalograms were obtained from the American Association of Orthodontists Foundation (AAOF) Craniofacial Growth Legacy Collection (Burlington, Fels, Iowa, and Oregon growth studies). We digitally traced 15 curves on each cephalogram, comprehensively covering the craniofacial skeleton, and located 127 points on the curves, 117 of which were sliding semilandmarks and 10 fixed. Procrustes alignment, principal component analysis and two-block partial least squares analysis were performed, after sliding the semilandmarks to minimize bending energy. RESULTS: The first 10 principal components (PCs) described approximately 71 per cent of the total shape variance. PC1 was related to shape variance in the vertical direction (low/high angle skeletal pattern) and PC2 was mainly related to shape variance in the anteroposterior direction (Class II/Class III pattern). PC3 was mainly related to the shape variance of the mandibular angle. All subjects shared a similar growth trajectory in shape space. We did not find any correlation between the initial shape and the magnitude of shape change between T1 and T2, but males showed a greater shape change than females. The direction of shape change was moderately correlated to the initial shape (RV coefficient: 0.14, P < 0.001). CONCLUSIONS: The initial shape of the craniofacial complex covaried weakly with the direction of shape change during growth.

Morphometric covariation between palatal shape and skeletal pattern in Class II growing subjects.

OBJECTIVES: To evaluate the patterns of covariation between palatal and craniofacial morphology in Class II subjects in the early mixed dentition by means of geometric morphometrics. METHODS: A cross-sectional sample of 85 Class II subjects (44 females, 41 males; mean age 8.7 years ± 0.8) was collected retrospectively according to the following inclusion criteria: European ancestry (white), Class II skeletal relationship, Class II division 1 dental relationship, early mixed dentition, and prepubertal skeletal maturation. Pre-treatment digital 3D maxillary dental casts and lateral cephalograms were available. Landmarks and semilandmarks were digitized (239 on the palate and 121 on the cephalogram) and geometric morphometric methods (GMM) were applied. Procrustes analysis and principal component analysis (PCA) were performed to reveal the main patterns of palatal shape and craniofacial skeletal shape variation. Two-block partial least squares analysis (PLS) assessed patterns of covariation between palatal morphology and craniofacial morphology. RESULTS: For the morphology of the palate, the first principal component (PC1) described variation in all three dimensions. For the morphology of the craniofacial complex, PC1 showed shape variation mainly in the vertical direction. Palatal shape and craniofacial shape covaried significantly (RV coefficient: 0.199). PLS1 accounted for more than 64 per cent of total covariation and related divergence of the craniofacial complex to palatal height and width. The more a Class II subject tended towards high-angle divergence, the narrower and higher was the palate. CONCLUSIONS: Class II high-angle patients tended to have narrower and higher palates, while Class II low-angle patients were related to wider and more shallow palates.

A novel method for pair-matching using three-dimensional digital models of bone: mesh-to-mesh value comparison.

The commingling of human remains often hinders forensic/physical anthropologists during the identification process, as there are limited methods to accurately sort these remains. This study investigates a new method for pair-matching, a common individualization technique, which uses digital three-dimensional models of bone: mesh-to-mesh value comparison (MVC). The MVC method digitally compares the entire three-dimensional geometry of two bones at once to produce a single value to indicate their similarity. Two different versions of this method, one manual and the other automated, were created and then tested for how well they accurately pair-matched humeri. Each version was assessed using sensitivity and specificity. The manual mesh-to-mesh value comparison method was 100 % sensitive and 100 % specific. The automated mesh-to-mesh value comparison method was 95 % sensitive and 60 % specific. Our results indicate that the mesh-to-mesh value comparison method overall is a powerful new tool for accurately pair-matching commingled skeletal elements, although the automated version still needs improvement.

Shape variation and covariation of upper and lower dental arches of an orthodontic population.

OBJECTIVES: This study aimed to quantify the patterns of shape variability and the extent and patterns of shape covariation between the upper and lower dental arch in an orthodontic population. METHODS: Dental casts of 133 white subjects (61 males, 72 females; ages 10.6-26.6) were scanned and digitized in three dimensions. Landmarks were placed on the incisal margins and on the cusps of canines, premolars, and molars. Geometric morphometric methods were applied (Procrustes superimposition and principal component analysis). Sexual dimorphism and allometry were evaluated with permutation tests and age-size and age-shape correlations were computed. Two-block partial least squares analysis was used to assess covariation of shape. RESULTS: The first four principal components represented shape patterns that are often encountered and recognized in clinical practice, accounting for 6-31 per cent of total variance. No shape sexual dimorphism was found, nevertheless, there was statistically significant size difference between males and females. Allometry was statistically significant, but low (upper: R(2) = 0.0528, P < 0.000, lower: R (2) = 0.0587, P < 0.000). Age and shape were weakly correlated (upper: R(2) = 0.0370, P = 0.0001, lower: R (2) = 0.0587, P = 0.0046). Upper and lower arches covaried significantly (RV coefficient: 33 per cent). The main pattern of covariation between the dental arches was arch width (80 per cent of total covariance); the second component related the maxillary canine vertical position to the mandibular canine labiolingual position (11 per cent of total covariance). LIMITATIONS: Results may not be applicable to the general population. Age range was wide and age-related findings are limited by the cross-sectional design. Aetiology of malocclusion was also not considered. CONCLUSIONS: Covariation patterns showed that the dental arches were integrated in width and depth. Integration in the vertical dimension was weak, mainly restricted to maxillary canine position.

The anterior component of occlusal force revisited: direct measurement and theoretical considerations.

BACKGROUND: The anterior component of occlusal force (ACF), considered to result from the mesial inclination of teeth relative to the occlusal plane, has been estimated by indirectly measuring contact point tightness (CPT) through interproximal insertion of metal strips. ACF has been observed concurrently with a posterior component, whose theoretical origin is difficult to explain. OBJECTIVES: Evaluate ACF by measuring CPT directly, and integrate current data to propose a theoretical basis for ACF. MATERIALS AND METHODS: The sample comprised 14 females (age: 22.3±2.8) and 16 males (age: 20.8±2.5). Our device consisted of two force sensors: one for measuring maximum bite force (MBF) (overall thickness: 4mm), and one for measuring CPT directly (0.2mm thick), inserted between the lower first molar and second premolar. ACF was computed as the difference in CPT between the biting (at 75 per cent of MBF) and non-biting conditions. RESULTS: Averages of MBF, CPT, and ACF were 666.67 [standard deviation (SD): 36.06], 6.74 (SD: 1.17), and 20.59 (SD: 4.60) N, respectively. ACF, CPT, and MBF were higher in males by approximately 28, 18 and 7 per cent, respectively. A positive correlation was observed between ACF and MBF (R (2): 0.64). CPT was also significantly correlated to MBF (R (2): 0.40). Biomechanical analysis indicates that previously offered explanations do not unriddle the concurrent increase of CPT at anterior and posterior contact points. CONCLUSIONS: ACF was related to bite force by a logarithmic model. We speculate that CPT increases during biting through a combination of mesial tipping of teeth and mandibular bending.

Selecting subjects with high craniofacial shape homogeneity for clinical trials.

INTRODUCTION: Morphologic homogeneity is desirable in sample selection of clinical studies that evaluate methods of treating craniofacial discrepancies in orthodontics. The purposes of this study were to assess sample selection criteria commonly used in the orthodontic literature regarding their effectiveness in achieving morphologic homogeneity, and to propose a method that can guarantee selection of a homogeneous sample, for which the degree of homogeneity and the average skeletal pattern can be specified a priori. METHODS: Pretreatment lateral cephalograms from 170 consecutive patients (82 boys, 88 girls) aged 7 to 17 years were used. Sixteen skeletal and 4 dental landmarks were digitized and processed with Procrustes superimposition and principal component analysis. The sample was bootstrapped to a virtual population of 10,000 subjects by random sampling from the normal distribution for each principal component. A systematic literature search of randomized controlled trials showed that the most prevalent sample selection criteria, in addition to molar relationship, included overjet, ANB, and SN-GoGn. Each criterion was applied to the virtual population. The morphologic homogeneity of the samples was assessed as the percentage of shape variance of each sample relative to the shape variance of the population. RESULTS: The first 3 principal components incorporated approximately 53% of shape variability. The evaluated criteria achieved low or moderate morphologic homogeneity scores (range, 28%-63%), and the selected patients were widely spread in the shape space. Although the criteria are commonly applied for selecting samples with skeletal discrepancies, a considerable number of subjects with an average shape were selected. The proposed procedure entails selecting a skeletal pattern appropriate for the study's purpose, setting limits in shape space within which the sample should be confined, and testing candidate patients against these limits. The patients within these boundaries have, by definition, a similar shape to the selected skeletal pattern and form a homogeneous sample. CONCLUSIONS: The cephalometric variables that have been used in randomized controlled trials do not result in samples of high morphologic homogeneity. The proposed method guarantees high morphologic homogeneity. The extent of homogeneity, the average shape of the sample, and the sample's relationship to the general population's average can be specified a priori.

Shape covariation between the craniofacial complex and first molars in humans.

The occurrence of mutual genetic loci in morphogenesis of the face and teeth implies shape covariation between these structures. However, teeth finalize their shape at an early age, whereas the face grows and is subjected to environmental influences for a prolonged period; it is therefore conceivable that covariation might modulate with age. Here we investigate the extent of this covariation in humans by measuring the 3D shape of the occlusal surface of the permanent first molars and the shape of the craniofacial complex from lateral radiographs, at two maturations stages. A sample of Greek subjects was divided into two groups (110 adult, 110 prepubertal) with equally distributed gender. The occlusal surfaces of the right first molars were 3D scanned from dental casts; 265 and 274 landmarks (including surface and curve semilandmarks) were digitized on the maxillary and mandibular molars, respectively. The corresponding lateral cephalometric radiographs were digitized with 71 landmarks. Geometric morphometric methods were used to assess shape variation and covariation. The vertical dimension of the craniofacial complex was the main parameter of shape variation, followed by anteroposterior deviations. The male craniofacial complex was larger (4.0-5.7%) and was characterized by a prominent chin and clockwise rotation of the cranial base (adult group only). Allometry was weak and statistically significant only when examined for the sample as a whole (percent variance explained: 2.1%, P = 0.0002). Covariation was statistically significant only between the lower first molar and the craniofacial complex (RV = 14.05%, P = 0.0099, and RV = 12.31%, P = 0.0162, for the prepubertal and adult groups, respectively). Subtle age-related covariation differences were noted, indicating that environmental factors may influence the pattern and strength of covariation. However, the main pattern was similar in both groups: a class III skeletal pattern (relative maxillary retrusion and mandibular protrusion), hyperdivergency, forward rotation of the posterior cranial base and upward rotation of the anterior cranial base were associated with mesiodistal elongation of the lower molars and height reduction of their distal cusps. This pattern mimics phylogeny in humans, where flexion and counterclockwise rotation of the cranial base, considered advantageous to survival, co-occur with tooth reductions that cannot be easily explained in evolutionary terms. The similarity of the phylogenetic and covariation patterns seems to support the pleiotropic gene hypothesis.

Correlation of 2D:4D digit ratio and craniofacial shape in prepubertal children.

OBJECTIVES: The 2D:4D ratio is sexually dimorphic and is considered a proxy of prenatal androgen levels, or, according to recent evidence, is related to genes involved in ocular and palate development. Our aim was to investigate correlation between the 2D:4D ratio and the shape of the craniofacial skeleton in a population of prepubertal children. METHODS: We conducted a cross-sectional study in a group of 58 male and 59 female prepubertal children aged 7-12 years. Craniofacial shape was evaluated using 15 skeletal landmarks on lateral cephalometric radiographs and fingers were measured with a computer-assisted procedure that involved tracing the finger outline. Geometric morphometric analysis was applied to the craniofacial landmarks and multivariate regression between digit ratios and craniofacial shape was computed in shape space and form space. RESULTS: The male 2D:4D ratio was smaller than the female ratio (Cohen's d: 0.275 left hand, 0.126 right hand), but the difference was not statistically significant. Craniofacial shape did not show sexual dimorphism, but males were larger than females. No correlation was found between digit ratio and craniofacial shape in prepubertal children, either for the whole sample or for any of the two sex groups. CONCLUSIONS: As several factors might be involved in the development and growth of both the craniofacial complex and fingers, the 2D:4D ratio, a putative proxy for fetal sex-hormone levels, is probably unable to impose a measurable effect within the variation of a normal population. Future research needs to examine an adult sample for potential covariation arising after the pubertal growth spurt.

Shape variation and sex differences of the adult human mandible evaluated by geometric morphometrics.

In cases of osseous defects, knowledge of the anatomy, and its age and sex-related variations, is essential for reconstruction of normal morphology. Here, we aimed at creating a 3D atlas of the human mandible in an adult sample using dense landmarking and geometric morphometrics. We segmented 50 male and 50 female mandibular surfaces from CBCT images (age range: 18.9-73.7 years). Nine fixed landmarks and 510 sliding semilandmarks were digitized on the mandibular surface, and then slid by minimizing bending energy against the average shape. Principal component analysis extracted the main patterns of shape variation. Sexes were compared with permutation tests and allometry was assessed by regressing on the log of the centroid size. Almost 49 percent of shape variation was described by the first three principal components. Shape variation was related to width, height and length proportions, variation of the angle between ramus and corpus, height of the coronoid process and inclination of the symphysis. Significant sex differences were detected, both in size and shape. Males were larger than females, had a higher ramus, more pronounced gonial angle, larger inter-gonial width, and more distinct antegonial notch. Accuracy of sexing based on the first two principal components in form space was 91 percent. The degree of edentulism was weakly related to mandibular shape. Age effects were not significant. The resulting atlas provides a dense description of mandibular form that can be used clinically as a guide for planning surgical reconstruction.

Geometric morphometric 3D shape analysis and covariation of human mandibular and maxillary first molars.

Dental casts of 160 Greek subjects (80 males, 80 females) were scanned by a structured-light scanner. The upper and lower right first molar occlusal surface 3D meshes were processed using geometric morphometric methods. A total of 265 and 274 curve and surface sliding semilandmarks were placed on the upper and lower molar surfaces, respectively. Principal component analysis and partial least square analysis were performed to assess shape parameters. Molars tended to vary between an elongated and a more square form. The first two principal components (PCs), comprising almost 1/3 of molar shape variation, were related to mesiodistal-buccolingual ratios and relative cusp position. Distal cusps displayed the greatest shape variability. Molars of males were larger than those of females (2.8 and 3.2% for upper and lower molars respectively), but no shape dimorphism was observed. Upper and lower molar sizes were significantly correlated (r(2) = 0.689). Allometry was observed for both teeth. Larger lower molars were associated with shorter cusps, expansion of the distal cusp, and constriction of the mesial cusps (predicted variance 3.25%). Upper molars displayed weaker allometry (predicted variance 1.59%). Upper and lower molar shape covariation proved significant (RV = 17.26%, P < 0.0001). The main parameter of molar covariation in partial least square axis 1, contributing to 30% of total covariation, was cusp height, in contrast to the primary variability traits exhibited by PC1 and PC2. The aim of this study was to evaluate shape variation and covariation, including allometry and sexual dimorphism, of maxillary and mandibular first permanent molar occlusal surfaces.