Clinical performance of two ion-releasing bulk-fill composites in class I and class II restorations: A two-year evaluation.

OBJECTIVES: This randomized clinical trial evaluated and compared the 2-year clinical performance of two ion-releasing bulk-fill composites (Cention N and Surefil One) with that of a conventional bulk-fill resin composite (Powerfil) in Class I and II cavities. METHODS: Thirty-two patients, each with 3 Class I and/or Class II cavities under occlusion, were enrolled in this trial. A total of 96 restorations were placed, 32 for each material, as follows: a self-adhesive composite; Surefil-one, alkasite; Cention N, and a bulk-fill resin composite; Powerfil. The restorations were placed by a single operator. Clinical evaluation was performed at baseline (1-week), 6-months, 1-year, and 2-years by two independent examiners using the FDI criteria. Intergroup and intragroup comparisons were analyzed using the Kruskal-Wallis and Friedman Tests. Multiple comparisons between groups were analyzed using the Mann-Whitney and Wilcoxon-rank tests. The level of significance was set at α = 0.05. RESULTS: Twenty-seven patients with a total of 81 restorations were evaluated at the end of the 2-years with 84.35% recall rates. Clinical success rates were 100%, 100%, and 96.3% for Powerfil, Surefil-one, and Cention N, respectively. Cention N showed a statistically significant (p < 0.05) decreased marginal integrity in comparison with resin composite at the 2-year evaluation. No recurrent decay was detected in any restoration. CONCLUSIONS: Both ion-releasing bulk-fill composites provided acceptable clinical performance similar to bulk-fill composite in Class I and II restorations over a 2-year period. CLINICAL RELEVANCE: The results of this trial suggests that there is a promising evidence supporting the use of ion-releasing composites.

Effect of various surface coating methods on surface roughness, micromorphological analysis and fluoride release from contemporary glass ionomer restorations.

OBJECTIVE: To evaluate the effect of various surface coating methods on surface roughness, micromorphological analysis and fluoride release from contemporary resin-modified and conventional glass ionomer restorations. MATERIALS & METHODS: A total of 72 permanent human molars were used in this study. The teeth were randomly assigned into 2 groups according to type of restorative materials used; resin modified glass ionomer cement and conventional glass ionomer (SDI Limited. Bayswater Victoria, Australia). Each group was subdivided into 3 subgroups according to the application of coat material; Sub-group1: without application of coat; Sub-group2: manufacturer recommended coat was applied and sub-group3: customized (vaseline) coat was applied. Each group was then subdivided into two divisions according to the time of testing; immediate (after 24 h) and delayed (after 6 months of storage). Three specimens from each sub-group were selected for surface roughness test (AFM) and another 3 specimens for the micromorphological analysis using scanning electron microscope (SEM). For the fluoride release test, a total of 60 cylindrical discs were used (n = 60). The discs were randomly split into 2 groups according to type of restorative materials used (n = 30); resin modified glass ionomer cement and conventional glass ionomer. Each group was subdivided into 3 subgroups (n = 10) according to the application of the coat material; Sub-group1: without application of coat; Sub-group2: with the manufacturer recommended coat and sub-group3: with application of customized (vaseline) coat. Data for each test was then collected, tabulated, were collected, tabulated, and tested for the normality with Shapiro-Wilk test. Based on the outcome of normality test, the significant effects of variables were assessed using appropriate statistical analysis testing methods. RESULTS: Regarding the data obtained from surface roughness test, Shapiro-Wilk test showed normal distribution pattern of all values (p > 0.05). Accordingly, Two-way ANOVA outcome showed that the 'type of restoration' or 'test time' had statistically significant effect on the AFM test (p < 0.05). Regarding Fluoride specific ion electrode test 2-way ANOVA followed by Least Significant Difference (LSD) Post-hoc test revealed significant difference among the groups (p < 0.05). It showed that SDI GIC group after 14 days of measurement had the highest mean of fluoride release (36.38 ± 3.16 PPM) and SDI RMGIC after 30 days of measurement had the second highest mean of fluoride release (43.28 ± 1.89 PPM). Finally, regarding the micromorphological analysis using SEM, a slight difference was observed between the studied groups. CONCLUSIONS: Based on the results of this study, various coatings enhance surface roughness in the initial 24 h of restoration insertion. Different coat types seems that have no influence on fluoride release and the micromorphological features of the restoration/dentin interface.

Microhardness and elemental analysis of ion-releasing restoration/ dentin interface following enzymatic chemomechanical caries excavation.

BACKGROUND: This study was conducted to compare chemical, elemental and surface properties of sound and carious dentin after application of two restorative materials resin-modified glassionomer claimed to be bioactive and glass hybrid restorative material after enzymatic chemomechanical caries removal (CMCR) agent. METHODS: Forty carious and twenty non-carious human permanent molars were used. Molars were randomly distributed into three main groups: Group 1 (negative control) - sound molars, Group 2 (positive control) - molars were left without caries removal and Group 3 (Test Group) caries excavated with enzymatic based CMCR agent. After caries excavation and restoration application, all specimens were prepared Vickers microhardness test (VHN), for elemental analysis using Energy Dispersive Xray (EDX) mapping and finally chemical analysis using Micro-Raman microscopy. RESULTS: Vickers microhardness values of dentin with the claimed bioactive GIC specimens was statistically higher than with glass hybrid GIC specimens. EDX analysis at the junction estimated: Calcium and Phosphorus of the glass hybrid GIC showed insignificantly higher mean valued than that of the bioactive GIC. Silica and Aluminum mean values at the junction were significantly higher with bioactive GIC specimens than glass hybrid GIC specimen. Micro-raman spectroscopy revealed that bioactive GIC specimens showed higher frequencies of v 1 PO 4, which indicated high level of remineralization. CONCLUSIONS: It was concluded that ion-releasing bioactive resin-based restorative material had increased the microhardness and remineralization rate of carries affected and sound dentin. In addition, enzymatic caries excavation with papain-based CMCR agent has no adverse effect on dentin substrate.

Complexity and interplay of faced adversities and perceived health and well-being in highly vulnerable pregnant women-the Mothers of Rotterdam program.

BACKGROUND: Living in socially disadvantaged circumstances has a widespread impact on one's physical and mental health. That is why individuals living in this situation are often considered vulnerable. When pregnant, not only the woman's health is affected, but also that of her (unborn) child. It is well accepted that vulnerable populations experience worse (perinatal) health, however, little is known about the lived adversities and health of these vulnerable individuals. OBJECTIVES: With this article, insights into this group of highly vulnerable pregnant women are provided by describing the adversities these women face and their experienced well-being. METHODS: Highly vulnerable women were recruited when referred to tailored social care during pregnancy. Being highly vulnerable was defined as facing at least three different adversities divided over two or more life-domains. The heat map method was used to assess the interplay between adversities from the different life domains. Demographics and results from the baseline questionnaires on self-sufficiency and perceived health and well-being were presented. RESULTS: Nine hundred nineteen pregnant women were referred to social care (2016-2020). Overall, women had a median of six adversities, distributed over four life-domains. The heat map revealed a large variety in lived adversities, which originated from two parental clusters, one dominated by financial adversities and the other by a the combination of a broad range of adversities. The perceived health was moderate, and 25-34% experienced moderate to severe levels of depression, anxiety or stress. This did not differ between the two parental clusters. CONCLUSIONS: This study shows that highly vulnerable pregnant women deal with multiple adversities affecting not only their social and economic position but also their health and well-being.

In vitro elemental and micromorphological analysis of the resin-dentin interface of bioactive and bulk-fill composites.

PURPOSE: To evaluate the bonding interface and the remineralization potential of a bioactive restorative material on demineralized dentin compared to a conventional bulk-fill resin composite restoration. METHODS: Twelve caries-free human molars were used in this study. Specimens were randomly divided into two groups according to the type of restorative material used (n=12); an injectable resin-modified glass-ionomer restorative [Activa BioActive-Restorative (ABR) ] and a bulk-fill composite [3M Filtek One Bulk Fill Restorative, (BFC) ]. Each restored specimen was sectioned in two semi-equal halves along the long axis of the teeth perpendicular to the resin dentin interface with a water-cooled diamond disk at low speed. The restoration-dentin interfaces were scanned under SEM to observe micromorphological analysis; then an elemental analysis of the interface was performed using an energy dispersive X-ray (EDX) spectroscopy. RESULTS: Quantitative data were described using median (minimum and maximum) after testing normality using the Shapiro-Wilk test. Mann-Whitney U test was used to compare the BFC and ABR. Higher mean values of Ca were identified and related to the ABR material, which provided more Ca ions than BFC. The comparison of Ca and P between materials showed a significant difference in the amount of Ca provided by ABR versus BFC. ABR restorations presented a thicker, and superior remineralization interface compared to the bulk-fill resin composite. CLINICAL SIGNIFICANCE: Activa BioActive Restorative restorations presented a thicker and superior remineralization interface compared to the bulk-fill resin composite.

Clinical performance of resin-matrix ceramic partial coverage restorations: a systematic review.

OBJECTIVE: To evaluate clinical performance of the new CAD/CAM resin-matrix ceramics and compare it with ceramic partial coverage restorations. MATERIALS AND METHODS: An electronic search of 3 databases (The National Library of Medicine (MEDLINE/PubMed), Scopus, and the Cochrane Central Register of Controlled Trials) was conducted. English clinical studies published between 2005 and September 2020 that evaluated the clinical performance of CAD/CAM resin-matrix ceramics inlays, onlays, or overlays were selected. The primary clinical question was applied according to PICOS strategy (Population, Intervention, Comparison, Outcome, Study design). The included studies were individually evaluated for risk of bias according to the modified Cochrane Collaboration tool criteria. RESULTS: A total of 7 studies were included according to the established inclusion and exclusion criteria. From the included studies, 6 were randomized clinical trials while one study was longitudinal observational study without control group. According to the results of the included studies, the success rate of CAD/CAM resin-based composite ranged from 85.7 to 100% whereas the success rate reported for ceramic partial coverage restorations ranged from 93.3 to 100%. Fractures and debondings are found to be the most common cause of restorations failure. CONCLUSION: CAD/CAM resin-based composite can be considered a reliable material for partial coverage restorations with clinical performance similar to glass ceramic restorations. However, this result needs to be confirmed in long-term evaluations. CLINICAL RELEVANCE: CAD/CAM resin-based composites provide a potential alternative to ceramic indirect restorations. However, clinicians must be aware of the lake of knowledge regarding long-term outcome.

Long-term evaluation of early-enamel lesions treated with novel experimental tricalcium silicate paste: A 2-year randomized clinical trial.

OBJECTIVE: The aim of the current study is to evaluate the remineralization potential of experimental tricalcium silicate (TCS) paste in comparison with more popular remineralizing agents like silver diamine fluoride potassium iodide (SDF-KI) and casein phosphopeptide amorphous calcium phosphate (CPP-ACP) on early enamel lesions. MATERIALS AND METHODS: Forty-five patients in the age range of 15-50 years had early enamel lesions on the buccal surface of molar teeth. The patients were randomly divided into three treatment groups (SDF-KI, CPP-ACP, and TCS group) with 15 patients per group. Lesions were evaluated clinically by DIAGNOdent pen immediately and after 3,6,12, and 24 months of treatment. RESULTS: The study was completed with 45 patients and 92 teeth. Twice-daily application of CPP-ACP and TCS paste showed a significant remineralization effect on early enamel lesions after 24 months (p < 0.001). Also, annual application of SDF-KI showed a significant remineralization effect after 24 months (p < 0.001). There was a significant difference between (SDF-KI and CPP-ACP) and (SDF-KI and TCS) at the different follow-up periods 3,6,12, and 24 months (p < 0.001). Meanwhile, there was no significant difference between CPP-ACP and TCS at the mentioned follow-up periods (p > 0.05). CONCLUSION: TCS showed potential remineralization for early enamel lesions. CLINICAL RELEVANCE: Experimental TCS is a promising remineralizing agent for management of early enamel lesions.

Effect of different surface treatments on resin-matrix CAD/CAM ceramics bonding to dentin: in vitro study.

BACKGROUND: Evaluating the effect of different surface treatment methods on the micro-tensile bond strength (µTBS) of two different resin-matrix computer-aided design/computer-aided manufacturing (CAD/CAM) ceramics (RMCs). METHODS: A standardized inlay preparations were performed on 100 intact maxillary premolars. According to the type of the restorative material, the teeth were randomly divided into two equally sized groups (n = 50): (polymer-infiltrated ceramic (Vita Enamic) and resin-based composites (Lava Ultimate)). The inlays were fabricated using CAD/CAM technology. In each group, the specimens were randomly assigned to five subgroups (n = 10) according to the surface treatment method: group 1 used was the control group (no surface treatment); group 2, was treated with air abrasion with 50 µm Al2O3 (A) and universal adhesive (UA); group 3, was treated with air abrasion with 50 µm Al2O3 (A) and silane coupling agent (S); group 4, was treated with hydrofluoric acid (HF) and universal adhesive (UA) and group 5, was treated with Hydrofluoric acid (HF) + silane coupling agent (S). The inlays were then cemented to their respective preparations using dual-cure self-adhesive resin cement (RelyX U200, 3 M ESPE) according to the manufacturer's instructions. The µTBS test was conducted in all groups, and stereomicroscope and scanning electron microscope were used to inspect the failure mode. The data were statistically analyzed using a two-way analysis of variance (ANOVA) and Tukey's post-hoc multiple comparison tests at a significance level of p < 0.05. RESULTS: Surface treatments significantly increased the µTBS of the materials compared to the control group (p < 0.05). For CAD/CAM RBCs, the µTBS value highest in group 2 whereas, for PICN, the µTBS value was highest in group 3. Cohesive failure of CAD/CAM restorative material was the most predominant mode of failure in all treated groups, whereas adhesive failure at restoration-cement interface was the most predominant failure mode in the control group. CONCLUSION: Surface treatments increase the µTBS of resin-matrix CAD/CAM ceramics to tooth structure. Air abrasion followed by universal adhesive and hydrofluoric acid followed by silane application appears to be the best strategies for optimizing the bond strength of CAD/CAM RBCs and PICN respectively.

Anti-Inflammatory Effects of Vardenafil Against Cholestatic Liver Damage in Mice: a Mechanistic Study.

BACKGROUND/AIMS: Phosphodiesterase-5 inhibitors have beneficial effects in multiple liver diseases possibly through the reduction of oxidative stress and inflammatory response. However, these effects have not yet been examined in cholestatic liver dysfunction. Hence, this study aimed to explore the ability of vardenafil, a known phosphodiesterase-5 inhibitor, to repress lithocholic acid (LCA)-induced cholestatic liver injury and investigate the possible molecular pathways. METHODS: Male Swiss albino mice were treated with LCA (0.125 mg/g) twice daily for 7 days to induce cholestatic liver damage. Vardenafil was administered 3 days before and throughout the administration of LCA. Serum markers of hepatotoxicity and hepatic nitro-oxidative stress along with antioxidant parameters were measured, and the histopathology of liver tissues was assessed. The expression of nuclear factor erythroid 2-related factor 2 (Nrf2) and its target genes was examined using PCR. The activation of nuclear factor kappa-B (NF-κB) and the levels of inflammatory cytokines were determined. NLRP3 inflammasome and its components were studied by PCR and western blot. RESULTS: LCA induced marked cholestatic liver damage as demonstrated by increased serum transaminases, alkaline phosphatase (ALP), lactate dehydrogenase (LDH), bilirubin, and bile acids. Examination of liver specimens confirmed the biochemical results. Nitro-oxidative stress parameters were significantly elevated along with reduced antioxidant capacity in hepatic tissue following LCA administration. LCA suppressed Nrf2 and its target genes and decreased the mRNA expression and binding capacity of Nrf2 as well as the mRNA expression of GCLm, GCLc, Nqo1, and HO-1. Additionally, LCA enhanced the activation of NF-κB, which was accompanied by elevations of inflammatory cytokines. Importantly, LCA induced the activation of NLRP3 inflammasome. LCA increased the expression of NLRP3, ASC, caspase-1, and IL-1ß genes and proteins in hepatic tissue. The activities of IL-1ß and caspase-1 were increased in the LCA group. Interestingly, vardenafil ameliorated LCA-induced hepatic injury and alleviated all biochemical, histopathological, and inflammatory parameters. CONCLUSIONS: These data elucidated the effects of Nrf2 inhibition and NLRP3 inflammasome activation in LCA-induced liver injury. The hepatoprotective activity of vardenafil in LCA-induced cholestatic damage may result from the drug's ability to activate Nrf2 signaling and prevent the activation of NLRP3, which could suppress the inflammatory responses in hepatic tissue. Thus, vardenafil can be considered a novel anti-inflammatory remedy for cholestatic liver damage.

Fine structure of the dorsal lingual epithelium in Tarentola annularis and Crocodylus niloticus.

The present study examined the morphological features, histological and histochemical aspect of the tongue of two reptilian species, Tarentola annularis (family: Gekkonidae) and Crocodylus niloticus (family: Crocodylidea), with different habitats, feeding patterns and behaviours, by light and scanning electron microscope. It was observed, that the bifurcation of the tongue was more visible in Tarentola annularis. Conical and filamentous papillae were observed on the lingual body of Tarentola annularis, while in Crocodylus niloticus both mechanical filiform and gustatory papillae appeared. The lingual mucosa in Tarentola annularis is covered by stratified squamous epithelium and keratinised but in Crocodylus niloticus it is highly folded and more heavily keratinised in the folded region and have a localised thickenings structure resembling taste buds. Mucous glands appeared in Tarentola annularis and compound tubular glands in Crocodylus niloticus. At scanning electron microscopy, abundant microridges and microvilli in both species were exhibited on papillae surface facilitated feeding habits. Histochemically, the tongue of two species is strongly positive for carbohydrate stain but with variable degree with others stains. In conclusion, there is a marked correlation between the structure of the tongue of the present reptilian species, habitats and feeding mechanism of the two species.

A new method of evaluation of fracture patterns following microtensile bond strength testing using polarized light microscopy.

PURPOSE: This work describes a new method using polarized light microscopy to determine the failure modes of fractured beams following microtensile bond strength testing. The outcomes were validated using SEM and EDX elemental analysis. MATERIALS AND METHODS: Resin adhesives and resin composites bonded to caries-free dentin samples as well as disks of adhesive and composite were observed with reflected polarized light microscopy (PLM) to obtain standard images. A set of beams fractured in the microtensile bond test were observed with PLM and compared with the standard images to determine failure mode through PLM color matching with the standard dentin, adhesive, or composite images. Samples were analyzed by EDX under SEM and compared with the PLM outcomes. RESULTS: Reflected PLM images showed that the fractured surfaces covered with resin-based materials (adhesives or composite) appeared pink in color, in contrast to dentin surfaces, which appeared yellow. EDX mapping together with SEM observation confirmed the results obtained by PLM. CONCLUSION: The results of EDX mapping and SEM observation showed that the use of polarized light microscopy is a simple, viable method for differentiation between the resin-covered dentin surfaces for determining fracture pattern analysis after bond testing.

Introduction of "qpdb" teeth numbering system.

This manuscript introduces a new method for teeth numbering system. The primary rationale of lunching this system was to solve previous numbering systems' drawbacks. Furthermore, to keep simplicity and ease of reading and inputting data. The outcome of a questionnaire disseminated among 66 personnel showed the confusion existing among currently used tooth numbering systems. The 'qpdb' system divided the oral cavity into four quadrants, each quadrant represented by alphabetical English letter (q, p, d & b). In spite of being a promising system, this new system lacks the real usage and application, and need more future studies to prove its validity.

3-year randomized clinical trial to evaluate the performance of posterior composite restorations lined with ion-releasing materials.

To evaluate the impact of using ion-releasing liners on the 3-year clinical performance of posterior resin composite restorations after selective caries excavation with polymer burs. 20 patients were enrolled in this trial. Each patient had two deep carious lesions, one on each side of the mouth. After selective caries removal using polymer bur (PolyBur P1, Komet, Brasseler GmbH Co. KG, Lemgo, Germany), cavities were lined with bioactive ionic resin composite (Activa Bioactive Base/Liner, Pulpdent, Watertown, MA, USA) or resin-modified glass ionomer liner (Riva Light Cure, SDI, Bayswater, Victoria, Australia). All cavities were then restored with nanofilled resin composite (Filtek Z350XT, 3M Oral Care, St. Paul, MN, USA). All the tested materials were placed according to the manufacturers' instructions. Clinical evaluation was accomplished using World Dental Federation (FDI) criteria at baseline and after 6 months, 1, 2, and 3 years. Data were analyzed using Mann-whitney U and Friedman tests (p < 0.05). The success rates were 100% for all resin composite restorations either lined with ion-releasing resin composite or resin-modified glass ionomer liner. Mann-whitney U test revealed that there were no statistically significant differences between both ion-releasing lining material groups for all criteria during the follow-up periods (p > 0.05). Resin composite restorations showed acceptable clinical performance over 3 years either lined with bioactive ionic or resin-modified glass ionomer liners after selective caries excavation preserving pulp vitality. After the 3-year follow-up period, Activa Bioactive and Riva Light Cure liners were clinically effective and they exhibited with the overlying composite restorations successful clinical performance.Trial registration number: NCT05470959. Date of registration: 22/7/2022. Retrospectively registered.

Effect of ethanolic extract of propolis on antibacterial and microshear bond strength of glass-ionomer restorations to dentin.

Objectives: This study was conducted to evaluate the effect of ethanolic extract of propolis on antibacterial and microshear bond strength of glass ionomer restorations to dentin. Materials and methods: Conventional glass ionomer cement (Equia forte, GC Tokyo, Japan), resin-modified glass ionomer (Fuji II LC, GC Tokyo, Japan) and propolis powder (dried extract from honey bees) materials were used in this study. Both conventional glass ionomer and resin-modified glass ionomer were modified by two different concentrations of ethanolic extract of propolis (10 % and 25 % EEP). For antibacterial test, Streptococcus mutans strain was spread on agar petri dishes using a sterile swab. Discs of both glass ionomer restorative materials (without adding EEP, with 10 % EEP and with 25 % EEP) were fabricated within the agar plates. Antibacterial activity was evaluated by measuring the inhibition zones around each disc. For microshear bond strength test, 60 healthy human permanent molars were prepared by cutting occlusal surface and expose the dentin at the height of contour of all teeth then conditioned using poly acrylic acid conditioner, both glass ionomer restorative materials (without adding EEP, with 10 % EEP and with 25 % EEP) were mixed and applied on conditioned dentin surface by using tygon tube. Microshear bond strength was evaluated by the universal testing machine. Results: Two-way ANOVA test revealed that both glass ionomer type and different concentrations of EEP had significant effect on the antibacterial test results and microshear bond strength values (p < 0,05). Glass ionomer restorative material with 25%EEP had the highest antibacterial values whereas glass ionomer restorative material without modifications (control groups) had the lowest values. Resin-modified glass ionomer without any modification (control group) had the highest bond strength while resin-modified glass ionomer with 25%EEP had the lowest bond strength. Conclusions: Incorporation of ethanolic extract of propolis to glass ionomer restorative material increases the antibacterial effects of both conventional GIC and RMGI. Inspite of this advantage, it seems that it has deleterious effect on microshear bond strength to dentin.

Microshear Bond Strength of Bioactive Materials to Dentin and Resin Composite.

OBJECTIVES: The aim of this study was to comparatively evaluate microshear bond strength (µSBS) of bioactive ionic resin composite and resin-modified glass ionomer liner (RMGI) to dentin and resin composite. MATERIALS AND METHODS: The enamel of 11 posterior molar teeth was removed to expose dentin and then placed in acrylic blocks. Each specimen received three microcylindrical Tygon tubes filled with bioactive ionic resin composite (Activa Bioactive base/liner (PULPDENT: , MA, USA)), RMGI (Riva light cure SDI LTD, Bayswater, Australia), and resin composite (Filtek Z350xt, MN, USA). Composite discs (n = 11) were fabricated from nanofilled resin composite (Filtek Z350xt) and then fixed in acrylic blocks. Each specimen received two microcylindrical Tygon tubes filled with Activa Bioactive base/liner and Riva RMGI. All specimens were mounted individually to universal testing machine for µSBS test. Failure modes were analyzed using stereomicroscope and scanning electron microscope. RESULTS: Filtek Z350xt nanofilled resin composite showed the highest µSBS values. No statistical significant difference was found between Activa Bioactive and Riva RMGI (p > 0.05). CONCLUSION: Bioactive ionic resin composite liner exhibited similar bond strength as RMGI to dentin and resin composite.

Inhibition of Caries around Restoration by Ion-Releasing Restorative Materials: An In Vitro Optical Coherence Tomography and Micro-Computed Tomography Evaluation.

The objective of this study was firstly to assess the demineralization inhibitory effect of ion-releasing restorations in enamel adjacent to restoration using a biofilm caries model and secondly to compare the effect to that in a chemical caries model. Fifty-six bovine incisors were filled with either Surefil one (SuO), Cention N (CN) (both ion-releasing materials), Ketac-Molar (GIC) or Powerfill resin composite (RC). The restored teeth were then randomly divided into 2 groups according to the used caries model (biofilm or chemical caries model). The micro-computed tomography (MicroCt) and optical coherence tomography (OCT) outcome measures used to evaluate demineralization inhibition effects were lesion depth, LD and increase in OCT integrated reflectivity, ΔIR, at five different depths. It was observed that all outcome measures of CN were statistically the same as those of GIC and conversely with those of RC. This was also the case for SuO except for LD, which was statistically the same as RC. When comparing the two caries models, LD of the biofilm model was statistically deeper (p < 0.05) than the chemical model for all four materials. In conclusion, CN and SuO have similar demineralization inhibitory effects as GIC, and the biofilm caries model is more discriminatory in differentiating demineralization inhibitory effects of ion-releasing restorative material.

Attitude towards donation of the excised foreskin after circumcision surgery for research: A study from Madinah, Saudi Arabia.

Studies have shown the possibility of using the part of the foreskin removed after circumcision in the field of scientific and therapeutic research. Donations of tissues and organs are always associated with ethical challenges posed by bioethicists and societies to ensure the appropriate use of these tissues/organs. The purpose of this study was to understand the attitudes and awareness of parents/guardians regarding donation of excised foreskin to research and medical use. The study was based on a questionnaire and included 133 parents/guardians who visited Uhud Children's Hospital in Madinah, Saudi Arabia for newborn male circumcision. The results showed a high willingness (61.7%) to donate the extracted foreskin to research. The willingness to donate the extracted foreskin to research associated with undergraduate degree (P = 0.018), male sex (P = 0.011), high income (P = 0.029), and participation in previous research studies (P = 0.002). About 41.8% were convinced that written informed consent should be obtained before circumcision surgery, 38.1% (n = 51) were convinced that written informed consent should be taken after surgery, while the remaining 19.4% reported that the timing of written informed consent is unimportant. Finally, fear of excision of excess tissue (74.5%), lack of confidence in the research (68.6%), and potential for commercial use (64.7%) were the main barriers to unwillingness to donate the excised foreskin for research. In conclusion, a reasonable portion of Saudis agreed to donate their foreskin for research purposes. There is an urgent need to enhance awareness and attitudes towards tissue donation for research and therapeutic use.

Assessment of the genotoxicity of quinolone and fluoroquinolones contaminated soil with the Vicia faba micronucleus test.

The genotoxicity of quinolone and fluroquinolones was assessed using the micronucleus (MN) test on Vicia faba roots by direct contact exposure to a solid matrix. Plants were exposed to quinolones (nalidixic acid) and fluoroquinolones (ciprofloxacin and enrofloxacin) alone or mixed with artificially contaminated soils. Four different concentrations of each of these antibiotics were tested (0.01, 0.1, 1 and 10 mg/Kg) for nalidixic acid and (0.005, 0.05, 0.5 and 5 mg/Kg) for ciprofloxacin and enrofloxacin. These antibiotics were also used in mixture. Exposure of Vicia faba plants to each antibiotic at the highest two concentrations showed significant MN induction. The lowest two concentrations had no significant genotoxic effect. The mixture of the three compounds induced a significant MN induction whatever the mixture tested, from 0.02 to 20 mg/Kg. The results indicated that a similar genotoxic effect was obtained with the mixture at 0.2 mg/Kg in comparison with each molecule alone at 5-10 mg/Kg. Data revealed a clear synergism of these molecules on Vicia faba genotoxicity.

Remineralization of early enamel lesions with a novel prepared tricalcium silicate paste.

To evaluate the remineralization potential of prepared tricalcium silicate (TCS) paste compared to silver diamine fluoride-potassium iodide (SDF-KI) and casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) on artificial enamel lesions. Thirty permanent sound molars were collected for the study. After cleaning, root cutting, and applying acid-resistant nail varnish, leaving a 4 × 4 mm buccal window, the teeth were subjected to demineralization process. The teeth were divided into three treatment groups (n = 10). In each group, the teeth were sectioned buccolingually to obtain two halves (30 self-control and 30 experimental halves). The self-control halves were subjected to cross-sectional microhardness (CSMH), energy-dispersive X-ray spectroscopy at 50, 100, and 150 µm from the external enamel surface, and micromorphological analysis at the superficial enamel surface. The experimental halves were subjected to the same tests after 30 days of remineralization. Three-way analysis of variance (ANOVA) outcomes showed no significant difference in CSMH after treatment among the three different groups at the different levels (p > 0.05). Meanwhile, three-way ANOVA outcomes showed a significant difference in calcium/ phosphate ratio after treatment among the three different groups at the different levels. (p < 0.05). The tricalcium silicate paste used in this study showed potential remineralization in subsurface enamel lesions.

Secondary caries and marginal adaptation of ion-releasing versus resin composite restorations: a systematic review and meta-analysis of randomized clinical trials.

This systematic review was aimed to evaluate occurrence of secondary caries and marginal adaptation in ion-releasing materials versus resin composite. Electronic search of PubMed, Scopus, and Open Grey databases with no date or language restrictions until May 21st, 2021, was conducted. Randomized clinical trials that compared ion-releasing restorations versus resin composite were included. For quantitative analysis, a random-effects meta-analysis with risk difference as an effect measure and a 95% confidence interval was used. Quality of evidence was assessed using The Grading of Recommendations, Assessment, Development, and Evaluation criteria. The risk of bias was evaluated using the Cochran Collaboration Risk of Bias tool. The inclusion criteria were met by 22 studies, and 10 studies were included in the meta-analysis. Three follow-up periods (1 year, 18 months-2 years, and 3 years) were evaluated. The overall quality of evidence for secondary caries and marginal adaptation outcomes was low. The results of the meta-analysis showed no significant difference (p > 0.05) in both outcomes between ion-releasing materials and resin composite. The occurrence of secondary caries was not dependent on the nature of the restorative material. It is more likely a complex process that involves the same risk factors as primary carious lesions.