Isolated cardiac muscle contracting against a real-time model of systemic and pulmonary cardiovascular loads.

Isolated cardiac tissues allow a direct assessment of cardiac muscle function and enable precise control of experimental loading conditions. However, current experimental methods do not expose isolated tissues to the same contraction pattern and cardiovascular loads naturally experienced by the heart. In this study, we implement a computational model of systemic-pulmonary impedance that is solved in real time and imposed on contracting isolated rat muscle tissues. This systemic-pulmonary model represents the cardiovascular system as a lumped-parameter, closed-loop circuit. The tissues performed force-length work-loop contractions where the model output informed both the shortening and restretch phases of each work-loop. We compared the muscle mechanics and energetics associated with work-loops driven by the systemic-pulmonary model with that of a model-based loading method that only accounts for shortening. We obtained results that show simultaneous changes of afterload and preload or end-diastolic length of the muscle, as compared with the static, user-defined preload as in the conventional loading method. This feature allows assessment of muscle work output, heat output, and efficiency of contraction as functions of end-diastolic length. The results reveal the behavior of cardiac muscle as a pump source to achieve load-dependent work and efficiency outputs over a wider range of loads. This study offers potential applications of the model to investigate cardiac muscle response to hemodynamic coupling between systemic and pulmonary circulations in an in vitro setting.NEW & NOTEWORTHY We present the use of a "closed-loop" model of systemic and pulmonary circulations to apply, for the first time, real-time model-calculated preload and afterload to isolated cardiac muscle preparations. This method extends current experimental protocols where only afterload has been considered. The extension to include preload provides the opportunity to investigate ventricular muscle response to hemodynamic coupling and as a pump source across a wider range of cardiovascular loads.

Cardiac efficiency and Starling's Law of the Heart.

The formulation by Starling of The Law of the Heart states that 'the [mechanical] energy of contraction, however measured, is a function of the length of the muscle fibre'. Starling later also stated that 'the oxygen consumption of the isolated heart … is determined by its diastolic volume, and therefore by the initial length of its muscular fibres'. This phrasing has motivated us to extend Starling's Law of the Heart to include consideration of the efficiency of contraction. In this study, we assessed both mechanical efficiency and crossbridge efficiency by studying the heat output of isolated rat ventricular trabeculae performing force-length work-loops over ranges of preload and afterload. The combination of preload and afterload allowed us, using our modelling frameworks for the end-systolic zone and the heat-force zone, to simulate cases by recreating physiologically feasible loading conditions. We found that across all cases examined, both work output and change of enthalpy increased with initial muscle length; hence it can only be that the former increases more than the latter to yield increased mechanical efficiency. In contrast, crossbridge efficiency increased with initial muscle length in cases where the extent of muscle shortening varied greatly with preload. We conclude that the efficiency of cardiac contraction increases with increasing initial muscle length and preload. An implication of our conclusion is that the length-dependent activation mechanism underlying the cellular basis of Starling's Law of the Heart is an energetically favourable process that increases the efficiency of cardiac contraction. KEY POINTS: Ernest Starling in 1914 formulated the Law of the Heart to describe the mechanical property of cardiac muscle whereby force of contraction increases with muscle length. He subsequently, in 1927, showed that the oxygen consumption of the heart is also a function of the length of the muscle fibre, but left the field unclear as to whether cardiac efficiency follows the same dependence. A century later, the field has gained an improved understanding of the factors, including the distinct effects of preload and afterload, that affect cardiac efficiency. This understanding presents an opportunity for us to investigate the elusive length-dependence of cardiac efficiency. We found that, by simulating physiologically feasible loading conditions using a mechano-energetics framework, cardiac efficiency increased with initial muscle length. A broader physiological importance of our findings is that the underlying cellular basis of Starling's Law of the Heart is an energetically favourable process that yields increased efficiency.

Slower shortening kinetics of cardiac muscle performing Windkessel work-loops increase mechanical efficiency.

Conventional experimental methods for studying cardiac muscle in vitro often do not expose the tissue preparations to a mechanical impedance that resembles the in vivo hemodynamic impedance dictated by the arterial system. That is, the afterload in work-loop contraction is conventionally simplified to be constant throughout muscle shortening, and at a magnitude arbitrarily defined. This conventional afterload does not capture the time-varying interaction between the left ventricle and the arterial system. We have developed a contraction protocol for isolated tissue experiments that allows the afterload to be described within a Windkessel framework that captures the mechanics of the large arteries. We aim to compare the energy expenditure of cardiac muscle undergoing the two contraction protocols: conventional versus Windkessel loading. Isolated rat left-ventricular trabeculae were subjected to the two force-length work-loop contractions. Mechanical work and heat liberation were assessed, and mechanical efficiency quantified, over wide ranges of afterloads or peripheral resistances. Both extent of shortening and heat output were unchanged between protocols, but peak shortening velocity was 39.0% lower and peak work output was 21.8% greater when muscles contracted against the Windkessel afterload than against the conventional isotonic afterload. The greater work led to a 25.2% greater mechanical efficiency. Our findings demonstrate that the mechanoenergetic performance of cardiac muscles in vitro may have been previously constrained by the conventional, arbitrary, loading method. A Windkessel loading protocol, by contrast, unleashes more cardiac muscle mechanoenergetic potential, where the slower shortening increases efficiency in performing mechanical work.NEW & NOTEWORTHY Cardiac muscle samples were allowed to describe their natural shortening dynamics while performing force-length work and liberating heat. The muscle shortened more slowly and produced greater force and work output against a time-varying "Windkessel" load than during conventional constant-force shortening, thereby yielding greater mechanical efficiency. A key finding is that the slower shortening kinetics developed in the face of a time-varying load enhances the mechanical efficiency of cardiac muscle during work-loop contractions.

Right-sided heart failure is also associated with transverse tubule remodeling in the left ventricle.

Right-sided heart failure is a common consequence of pulmonary arterial hypertension. Overloading the right ventricle results in right ventricular hypertrophy, which progresses to failure in a process characterized by impaired Ca2+ dynamics and force production that is linked with transverse (t)-tubule remodeling. This also unloads the left ventricle, which consequently atrophies. Experimental left-ventricular unloading can result in t-tubule remodeling, but it is currently unclear if this occurs in right-sided heart failure. In this work, we used a model of monocrotaline (MCT)-induced right heart failure in male rats, using confocal microscopy to investigate cellular remodeling of t-tubules, junctophilin-2 (JPH2), and ryanodine receptor-2 (RyR2). We examined remodeling across tissue anatomical regions of both ventricles: in trabeculae, papillary muscles, and free walls. Our analyses revealed that MCT hearts demonstrated a significant loss of t-tubule periodicity, disruption of the normal sarcomere striated pattern with JPH2 labeling, and also a disorganized striated pattern of RyR2, a feature not previously reported in right heart failure. Remodeling of JPH2 and RyR2 in the MCT heart was more pronounced in papillary muscles and trabeculae compared with free walls, particularly in the left ventricle. We find that these structures, commonly used as ex vivo muscle preparations, are more sensitive to the disease process.NEW & NOTEWORTHY In this work, we demonstrate that t-tubule remodeling occurs in the atrophied left ventricle as well as the overloaded right ventricle after right-side heart failure. Moreover, we identify that t-tubule remodeling in both ventricles is linked to sarcoplasmic reticulum remodeling as indicated by decreased labeling periodicity of both the Ca2+ release channel, RyR2, and the cardiac junction-forming protein, JPH2, that forms a link between the sarcoplasmic reticulum and sarcolemma. Studies developing treatments for right-sided heart failure should consider effects on both the right and left ventricle.

Heat production in quiescent cardiac muscle is length, velocity and muscle dependent: Implications for active heat measurement.

NEW FINDINGS: What is the central question of this study? Intracellular energetic processes in quiescent cardiac muscle release 'basal' heat; during contraction, a much larger amount of 'active' heat is also produced. Previously, measurement challenges have constrained researchers to assume that basal heat rate remains constant during contraction and shortening. Is this assumption correct? What is the main finding and its importance? We show that basal heat rate is modulated by the extent and velocity of muscle shortening. Their relative contributions are muscle specific. We apply a method with which researchers can now disentangle, for each experiment, changes in basal heat from active heat production, providing more precise measures of the individual energetic processes underlying cardiac muscle contraction. ABSTRACT: Separating the variations in cardiac basal heat rate from variations in active heat rate is necessary to determine cardiac muscle energy consumption accurately during the performance of active work. By developing a model of cardiac muscle basal heat rate, we aimed to investigate changes in basal heat rate when cardiac muscle performs work. Experiments were conducted on 10 isolated rat cardiac trabeculae subjected to both active (work-loops) and quiescent (length-change and velocity) interventions. Muscle force, length and heat output rate were measured simultaneously in a flow-through work-loop calorimeter. Quiescent muscle characteristics were used to parameterize muscle-specific models of change in basal heat rate, thereby to predict dynamic changes in basal heat rate during active work-loop contraction. Our data showed that the quiescent heat characteristics of cardiac muscle varied between samples, displaying dependence on both the extent and the rate of change in muscle length. We found a moderate correlation between muscle dimensions (cross-sectional area and volume) and the length-dependent basal heat parameter (P = 0.0330 and P = 0.0242, respectively), but no correlation with the velocity-dependent parameter. These findings lead us to conclude that the heat output of cardiac muscle at quiescence varies with both the extent and the velocity of shortening, to an extent that is muscle specific, and that this variation must be measured and accounted for in each specimen when assessing active energetics.

Solving a century-old conundrum underlying cardiac force-length relations.

In the late 19th century, Otto Frank presented a diagram (Frank O. Z Biol 37: 483-526, 1899) showing that cardiac end-systolic pressure-volume relations are dependent on the mode of contraction: one for isovolumic contractions that locate above that for afterloaded ejecting contractions. Conflicting results to Frank's have been subsequently demonstrated in various species, both within and among preparations, ranging from the whole hearts to single myocytes, showing a single pressure-volume or force-length relation that is independent of the mode of contraction. Numerous explanations for these conflicting results have been proposed but are mutually contradictory and hence unsatisfying. The present study aimed to explore how these conflicting findings can be reconciled. We thus explored the cardiac force-length relation across a wide spectrum of both preloads and afterloads, encompassing the physiological working range. Experiments were performed using isolated ventricular trabeculae at physiological temperature and stimulus frequency. The force-length relation obtained from isometric contractions was indeed located above a family of those obtained from shortening contractions. Low preload conditions rendered the relation contraction mode independent. High afterload conditions also showed a comparable effect. Our exploration allowed us to reveal the loading conditions that can explain the apparent single, contraction mode-independent, force-length relation that is in contrast with that presented by Frank. Resolving this century-old cardiac conundrum highlights the caution that must be taken when using the end-systolic force-length relation to illustrate as well as to understand the concepts of the Frank-Starling law of the heart, "potential energy," and cardiac contractility. NEW & NOTEWORTHY Our exploration of the cardiac force-length relation under wide ranges of preload and afterload has allowed us to reconcile conflicting results in the literature regarding its length dependency. We show that the relation is dependent on the mode of contraction but can appear to be otherwise under certain conditions. This finding highlights the need for caution when using the force-length relation to understand key concepts in cardiac physiology.

Extensive eccentric contractions in intact cardiac trabeculae: revealing compelling differences in contractile behaviour compared to skeletal muscles.

Force enhancement (FE) is a phenomenon that is present in skeletal muscle. It is characterized by progressive forces upon active stretching-distinguished by a linear rise in force-and enhanced isometric force following stretching (residual FE (RFE)). In skeletal muscle, non-cross-bridge (XB) structures may account for this behaviour. So far, it is unknown whether differences between non-XB structures within the heart and skeletal muscle result in deviating contractile behaviour during and after eccentric contractions. Thus, we investigated the force response of intact cardiac trabeculae during and after isokinetic eccentric muscle contractions (10% of maximum shortening velocity) with extensive magnitudes of stretch (25% of optimum muscle length). The different contributions of XB and non-XB structures to the total muscle force were revealed by using an actomyosin inhibitor. For cardiac trabeculae, we found that the force-length dynamics during long stretch were similar to the total isometric force-length relation. This indicates that no (R)FE is present in cardiac muscle while stretching the muscle from 0.75 to 1.0 optimum muscle length. This finding is in contrast with the results obtained for skeletal muscle, in which (R)FE is present. Our data support the hypothesis that titin stiffness does not increase with activation in cardiac muscle.

Pulmonary arterial hypertension reduces energy efficiency of right, but not left, rat ventricular trabeculae.

KEY POINTS: Pulmonary arterial hypertension (PAH) triggers right ventricle (RV) hypertrophy and left ventricle (LV) atrophy, which progressively leads to heart failure. We designed experiments under conditions mimicking those encountered by the heart in vivo that allowed us to investigate whether consequent structural and functional remodelling of the ventricles affects their respective energy efficiencies. We found that peak work output was lower in RV trabeculae from PAH rats due to reduced extent and velocity of shortening. However, their suprabasal enthalpy was unaffected due to increased activation heat, resulting in reduced suprabasal efficiency. There was no effect of PAH on LV suprabasal efficiency. We conclude that the mechanism underlying the reduced energy efficiency of hypertrophied RV tissues is attributable to the increased energy cost of Ca2+ cycling, whereas atrophied LV tissues still maintain normal mechano-energetic performance. ABSTRACT: Pulmonary arterial hypertension (PAH) greatly increases the afterload on the right ventricle (RV), triggering RV hypertrophy, which progressively leads to RV failure. In contrast, the disease reduces the passive filling pressure of the left ventricle (LV), resulting in LV atrophy. We investigated whether these distinct structural and functional consequences to the ventricles affect their respective energy efficiencies. We studied trabeculae isolated from both ventricles of Wistar rats with monocrotaline-induced PAH and their respective Control groups. Trabeculae were mounted in a calorimeter at 37°C. While contracting at 5 Hz, they were subjected to stress-length work-loops over a wide range of afterloads. They were subsequently required to undergo a series of isometric contractions at various muscle lengths. In both protocols, stress production, length change and suprabasal heat output were simultaneously measured. We found that RV trabeculae from PAH rats generated higher activation heat, but developed normal active stress. Their peak external work output was lower due to reduced extent and velocity of shortening. Despite lower peak work output, suprabasal enthalpy was unaffected, thereby rendering suprabasal efficiency lower. Crossbridge efficiency, however, was unaffected. In contrast, LV trabeculae from PAH rats maintained normal mechano-energetic performance. Pulmonary arterial hypertension reduces the suprabasal energy efficiency of hypertrophied right ventricular tissues as a consequence of the increased energy cost of Ca2+ cycling.

Do right-ventricular trabeculae gain energetic advantage from having a greater velocity of shortening?

KEY POINTS: We designed a study to test whether velocity of shortening in right-ventricular tissue preparations is greater than that of the left side under conditions mimicking those encountered by the heart in vivo. Our experiments allowed us to explore whether greater velocity of shortening results in any energetic advantage. We found that velocity of shortening was higher in the rat right-ventricular trabeculae. These results at the tissue level seem paradoxical to the velocity of ventricular ejection at the organ level, and are not always in accord with shortening of unloaded cells. Despite greater velocity of shortening in right-ventricular trabeculae, they neither gained nor lost advantage with respect to both mechanical efficiency and the heat generated during shortening. ABSTRACT: Our study aimed to ascertain whether the interventricular difference of shortening velocity, reported for isolated cardiac tissues in vitro, affects interventricular mechano-energetic performance when tested under physiological conditions using a shortening protocol designed to mimic those in vivo. We isolated trabeculae from both ventricles of the rat, mounted them in a calorimeter, and performed experiments at 37°C and 5 Hz stimulus frequency to emulate conditions of the rat heart in vivo. Each trabecula was subjected to two experimental protocols: (i) isotonic work-loop contractions at a variety of afterloads, and (ii) isometric contractions at a variety of preloads. Velocity of shortening was calculated from the former protocol during the isotonic shortening phase of the contraction. Simultaneous measurements of force-length work and heat output allowed calculation of mechanical efficiency. The shortening-dependent thermal component was quantified from the difference in heat output between the two protocols. Our results show that both extent of shortening and velocity of shortening were higher in trabeculae from the right ventricle. Despite these differences, trabeculae from both ventricles developed the same stress, performed the same work, liberated the same amount of heat, and hence operated at the same mechanical efficiency. Shortening heat was also ventricle independent. The interventricular differences in velocity of shortening and extent of shortening of isolated trabeculae were not manifested in any index of energetics. These collective results underscore the absence of any mechano-energetic advantage or disadvantage conferred on right-ventricular trabeculae arising from their superior velocity of shortening.

Experimental and modelling evidence of shortening heat in cardiac muscle.

KEY POINTS: Heat associated with muscle shortening has been repeatedly demonstrated in skeletal muscle, but its existence in cardiac muscle remains contentious after five decades of study. By iterating between experiments and computational modelling, we show compelling evidence for the existence of shortening heat in cardiac muscle and reveal, mechanistically, the source of this excess heat. Our results clarify a long-standing uncertainty in the field of cardiac muscle energetics. We provide a revised partitioning of cardiac muscle energy expenditure to include this newly revealed thermal component. ABSTRACT: When a muscle shortens against an afterload, the heat that it liberates is greater than that produced by the same muscle contracting isometrically at the same level of force. This excess heat is defined as 'shortening heat', and has been repeatedly demonstrated in skeletal muscle but not in cardiac muscle. Given the micro-structural similarities between these two muscle types, and since we imagine that shortening heat is the thermal accompaniment of cross-bridge cycling, we have re-examined this issue. Using our flow-through microcalorimeter, we measured force and heat generated by isolated rat trabeculae undergoing isometric contractions at different muscle lengths and work-loop (shortening) contractions at different afterloads. We simulated these experimental protocols using a thermodynamically constrained model of cross-bridge cycling and probed the mechanisms underpinning shortening heat. Predictions generated by the model were subsequently validated by a further set of experiments. Both our experimental and modelling results show convincing evidence for the existence of shortening heat in cardiac muscle. Its magnitude is inversely related to the afterload or, equivalently, directly related to the extent of shortening. Computational simulations reveal that the heat of shortening arises from the cycling of cross-bridges, and that the rate of ATP hydrolysis is more sensitive to change of muscle length than to change of afterload. Our results clarify a long-standing uncertainty in the field of cardiac muscle energetics.

Does the intercept of the heat-stress relation provide an accurate estimate of cardiac activation heat?

KEY POINTS: The heat of activation of cardiac muscle reflects the metabolic cost of restoring ionic homeostasis following a contraction. The accuracy of its measurement depends critically on the abolition of crossbridge cycling. We abolished crossbridge activity in isolated rat ventricular trabeculae by use of blebbistatin, an agent that selectively inhibits myosin II ATPase. We found cardiac activation heat to be muscle length independent and to account for 15-20% of total heat production at body temperature. We conclude that it can be accurately estimated at minimal muscle length. ABSTRACT: Activation heat arises from two sources during the contraction of striated muscle. It reflects the metabolic expenditure associated with Ca2+ pumping by the sarcoplasmic reticular Ca2+ -ATPase and Ca2+ translocation by the Na+ /Ca2+ exchanger coupled to the Na+ ,K+ -ATPase. In cardiac preparations, investigators are constrained in estimating its magnitude by reducing muscle length to the point where macroscopic twitch force vanishes. But this experimental protocol has been criticised since, at zero force, the observed heat may be contaminated by residual crossbridge cycling activity. To eliminate this concern, the putative thermal contribution from crossbridge cycling activity must be abolished, at least at minimal muscle length. We achieved this using blebbistatin, a selective inhibitor of myosin II ATPase. Using a microcalorimeter, we measured the force production and heat output, as functions of muscle length, of isolated rat trabeculae from both ventricles contracting isometrically at 5 Hz and at 37°C. In the presence of blebbistatin (15 µmol l-1 ), active force was zero but heat output remained constant, at all muscle lengths. Activation heat measured in the presence of blebbistatin was not different from that estimated from the intercept of the heat-stress relation in its absence. We thus reached two conclusions. First, activation heat is independent of muscle length. Second, residual crossbridge heat is negligible at zero active force; hence, the intercept of the cardiac heat-force relation provides an estimate of activation heat uncontaminated by crossbridge cycling. Both results resolve long-standing disputes in the literature.

Myocardial energetics is not compromised during compensated hypertrophy in the Dahl salt-sensitive rat model of hypertension.

Salt-induced hypertension leads to development of left ventricular hypertrophy in the Dahl salt-sensitive (Dahl/SS) rat. Before progression to left ventricular failure, the heart initially undergoes a compensated hypertrophic response. We hypothesized that changes in myocardial energetics may be an early indicator of transition to failure. Dahl/SS rats and their salt-resistant consomic controls (SS-13(BN)) were placed on either a low- or high-salt diet to generate four cohorts: Dahl-SS rats on a low- (Dahl-LS) or high-salt diet (Dahl-HS), and SS-13(BN) rats on a low- (SSBN-LS) or high-salt diet (SSBN-HS). We isolated left ventricular trabeculae and characterized their mechanoenergetic performance. Our results show, at most, modest effects of salt-induced compensated hypertrophy on myocardial energetics. We found that the Dahl-HS cohort had a higher work-loop heat of activation (estimated from the intercept of the heat vs. relative afterload relationship generated from work-loop contractions) relative to the SSBN-HS cohort and a higher economy of contraction (inverse of the slope of the heat vs. active stress relation) relative to the Dahl-LS cohort. The maximum extent of shortening and maximum shortening velocity of the Dahl/SS groups were higher than those of the SS-13(BN) groups. Despite these differences, no significant effect of salt-induced hypertension was observed for either peak work output or peak mechanical efficiency during compensated hypertrophy.

Cardiac activation heat remains inversely dependent on temperature over the range 27-37°C.

The relation between heat output and stress production (force per cross-sectional area) of isolated cardiac tissue is a key metric that provides insight into muscle energetic performance. The heat intercept of the relation, termed "activation heat," reflects the metabolic cost of restoring transmembrane gradients of Na(+) and K(+) following electrical excitation, and myoplasmic Ca(2+) concentration following its release from the sarcoplasmic reticulum. At subphysiological temperatures, activation heat is inversely dependent on temperature. Thus one may presume that activation heat would decrease even further at body temperature. However, this assumption is prima facie inconsistent with a study, using intact hearts, which revealed no apparent change in the combination of activation and basal metabolism between 27 and 37°C. It is thus desired to directly determine the change in activation heat between 27 and 37°C. In this study, we use our recently constructed high-thermal resolution muscle calorimeter to determine the first heat-stress relation of isolated cardiac muscle at 37°C. We compare the relation at 37°C to that at 27°C to examine whether the inverse temperature dependence of activation heat, observed under hypothermic conditions, prevails at body temperature. Our results show that activation heat was reduced (from 3.5 ± 0.3 to 2.3 ± 0.3 kJ/m(3)) at the higher temperature. This leads us to conclude that activation metabolism continues to decline as temperature is increased from hypothermia to normothermia and allows us to comment on results obtained from the intact heart by previous investigators.

Muscle heat: a window into the thermodynamics of a molecular machine.

The contraction of muscle is characterized by the development of force and movement (mechanics) together with the generation of heat (metabolism). Heat represents that component of the enthalpy of ATP hydrolysis that is not captured by the microscopic machinery of the cell for the performance of work. It arises from two conceptually and temporally distinct sources: initial metabolism and recovery metabolism. Initial metabolism comprises the hydrolysis of ATP and its rapid regeneration by hydrolysis of phosphocreatine (PCr) in the processes underlying excitation-contraction coupling and subsequent cross-bridge cycling and sliding of the contractile filaments. Recovery metabolism describes those process, both aerobic (mitochondrial) and anaerobic (cytoplasmic), that produce ATP, thereby allowing the regeneration of PCr from its hydrolysis products. An equivalent partitioning of muscle heat production is often invoked by muscle physiologists. In this formulation, total enthalpy expenditure is separated into external mechanical work (W) and heat (Q). Heat is again partitioned into three conceptually distinct components: basal, activation, and force dependent. In the following mini-review, we trace the development of these ideas in parallel with the development of measurement techniques for separating the various thermal components.

A high-resolution thermoelectric module-based calorimeter for measuring the energetics of isolated ventricular trabeculae at body temperature.

Isolated ventricular trabeculae are the most common experimental preparations used in the study of cardiac energetics. However, the experiments have been conducted at subphysiological temperatures. We have overcome this limitation by designing and constructing a novel calorimeter with sufficiently high thermal resolution for simultaneously measuring the heat output and force production of isolated, contracting, ventricular trabeculae at body temperature. This development was largely motivated by the need to better understand cardiac energetics by performing such measurements at body temperature to relate tissue performance to whole heart behavior in vivo. Our approach uses solid-state thermoelectric modules, tailored for both temperature sensing and temperature control. The thermoelectric modules have high sensitivity and low noise, which, when coupled with a multilevel temperature control system, enable an exceptionally high temperature resolution with a noise-equivalent power an order of magnitude greater than those of other existing muscle calorimeters. Our system allows us to rapidly and easily change the experimental temperature without disturbing the state of the muscle. Our calorimeter is useful in many experiments that explore the energetics of normal physiology as well as pathophysiology of cardiac muscle.

Dietary pre-exposure of rats to fish oil does not enhance myocardial efficiency of isolated working hearts or their left ventricular trabeculae.

Numerous epidemiological studies, supported by clinical and experimental findings, have suggested beneficial effects of dietary fish or fish oil supplementation on cardiovascular health. One such experimental study showed a profound (100%) increase in myocardial efficiency (i.e. the ratio of work output to metabolic energy input) of the isolated whole heart, achieved by a corresponding decrease in the rate of myocardial oxygen consumption. However, a number of other investigations have returned null results on the latter energetic index. Such conflicting findings have motivated us to undertake a re-examination. To that effect, we investigated the effects of dietary fatty acid supplementation on myocardial mechano-energetics, with our primary focus on cardiac efficiency. We used both isolated hearts and isolated left ventricular trabeculae of rats fed with one of three distinct diets: reference (REF), fish oil-supplemented (FO) or saturated fat-supplemented (SFA). For all three groups, and at both spatial levels, we supplied 10 mm glucose as the exogenous metabolic substrate. In the working heart experiments, we found no difference in the average mechanical efficiency among the three dietary groups: 14.8 ± 1.1% (REF), 13.9 ± 0.6% (FO) and 13.6 ± 0.7% (SFA). Likewise, we observed no difference in peak mechanical efficiency of left ventricular trabeculae among the REF, FO and SFA groups: 13.3 ± 1.4, 11.2 ± 2.2 and 12.5 ± 1.5%, respectively. We conclude that there is no effect of a period of pre-exposure to a diet supplemented with either fish oil or saturated fatty acids on the efficiency of the myocardium at either spatial level: tissue or whole heart.

Streptozotocin-induced diabetes prolongs twitch duration without affecting the energetics of isolated ventricular trabeculae.

BACKGROUND: Diabetes induces numerous electrical, ionic and biochemical defects in the heart. A general feature of diabetic myocardium is its low rate of activity, commonly characterised by prolonged twitch duration. This diabetes-induced mechanical change, however, seems to have no effect on contractile performance (i.e., force production) at the tissue level. Hence, we hypothesise that diabetes has no effect on either myocardial work output or heat production and, consequently, the dependence of myocardial efficiency on afterload of diabetic tissue is the same as that of healthy tissue. METHODS: We used isolated left ventricular trabeculae (streptozotocin-induced diabetes versus control) as our experimental tissue preparations. We measured a number of indices of mechanical (stress production, twitch duration, extent of shortening, shortening velocity, shortening power, stiffness, and work output) and energetic (heat production, change of enthalpy, and efficiency) performance. We calculated efficiency as the ratio of work output to change of enthalpy (the sum of work and heat). RESULTS: Consistent with literature results, we showed that peak twitch stress of diabetic tissue was normal despite suffering prolonged duration. We report, for the first time, the effect of diabetes on mechanoenergetic performance. We found that the indices of performance listed above were unaffected by diabetes. Hence, since neither work output nor change of enthalpy was affected, the efficiency-afterload relation of diabetic tissue was unaffected, as hypothesised. CONCLUSIONS: Diabetes prolongs twitch duration without having an effect on work output or heat production, and hence efficiency, of isolated ventricular trabeculae. Collectively, our results, arising from isolated trabeculae, reconcile the discrepancy between the mechanical performance of the whole heart and its tissues.

The afterload-dependent peak efficiency of the isolated working rat heart is unaffected by streptozotocin-induced diabetes.

BACKGROUND: Diabetes is known to alter the energy metabolism of the heart. Thus, it may be expected to affect the efficiency of contraction (i.e., the ratio of mechanical work output to metabolic energy input). The literature on the subject is conflicting. The majority of studies have reported a reduction of myocardial efficiency of the diabetic heart, yet a number of studies have returned a null effect. We propose that these discrepant findings can be reconciled by examining the dependence of myocardial efficiency on afterload. METHODS: We performed experiments on streptozotocin (STZ)-induced diabetic rats (7-8 weeks post-induction), subjecting their (isolated) hearts to a wide range of afterloads (40 mmHg to maximal, where aortic flow approached zero). We measured work output and oxygen consumption, and their suitably scaled ratio (i.e., myocardial efficiency). RESULTS: We found that myocardial efficiency is a complex function of afterload: its value peaks in the mid-range and decreases on either side. Diabetes reduced the maximal afterload to which the hearts could pump (105 mmHg versus 150 mmHg). Thus, at high afterloads (for example, 90 mmHg), the efficiency of the STZ heart was lower than that of the healthy heart (10.4% versus 14.5%) due to its decreased work output. Diabetes also reduced the afterload at which peak efficiency occurred (optimal afterload: 63 mmHg versus 83 mmHg). Despite these negative effects, the peak value of myocardial efficiency (14.7%) was unaffected by diabetes. CONCLUSIONS: Diabetes reduces the ability of the heart to pump at high afterloads and, consequently, reduces the afterload at which peak efficiency occurs. However, the peak efficiency of the isolated working rat heart remains unaffected by STZ-induced diabetes.

Interventricular comparison of the energetics of contraction of trabeculae carneae isolated from the rat heart.

We compare the energetics of right ventricular and left ventricular trabeculae carneae isolated from rat hearts. Using our work-loop calorimeter, we subjected trabeculae to stress-length work (W), designed to mimic the pressure-volume work of the heart. Simultaneous measurement of heat production (Q) allowed calculation of the accompanying change of enthalpy (H = W + Q). From the mechanical measurements (i.e. stress and change of length), we calculated work, shortening velocity and power. In combination with heat measurements, we calculated activation heat (Q(A)), crossbridge heat (Q(xb)) and two measures of cardiac efficiency: 'mechanical efficiency' ((mech) = W/H) and 'crossbridge efficiency' ((xb) = W/(H - Q(A))). With respect to their left ventricular counterparts, right venticular trabeculae have higher peak shortening velocity, and higher peak mechanical efficiency, but with no difference of stress development, twitch duration, work performance, shortening power or crossbridge efficiency. That is, the 35% greater maximum mechanical efficiency of right venticular than left ventricular trabeculae (13.6 vs. 10.2%) is offset by the greater metabolic cost of activation (Q(A)) in the latter. When corrected for this difference, crossbridge efficiency does not differ between the ventricles.

Methods for assessing cardiac myofilament calcium sensitivity.

Myofilament calcium (Ca2+) sensitivity is one of several mechanisms by which force production of cardiac muscle is modulated to meet the ever-changing demands placed on the heart. Compromised Ca2+ sensitivity is associated with pathologies, which makes it a parameter of interest for researchers. Ca2+ Sensitivity is the ratio of the association and dissociation rates between troponin C (TnC) and Ca2+. As it is not currently possible to measure these rates in tissue preparations directly, methods have been developed to infer myofilament sensitivity, typically using some combination of force and Ca2+ measurements. The current gold-standard approach constructs a steady-state force-Ca2+ relation by exposing permeabilised muscle samples to a range of Ca2+ concentrations and uses the half-maximal concentration as a proxy for sensitivity. While a valuable method for steady-state investigations, the permeabilisation process makes the method unsuitable when examining dynamic, i.e., twitch-to-twitch, changes in myofilament sensitivity. The ability of the heart to transiently adapt to changes in load is an important consideration when evaluating the impact of disease states. Alternative methods have been proffered, including force-Ca2+ phase loops, potassium contracture, hybrid experimental-modelling and conformation-based fluorophore approaches. This review provides an overview of the mechanisms underlying myofilament Ca2+ sensitivity, summarises existing methods, and explores, with modelling, whether any of them are suited to investigating dynamic changes in sensitivity. We conclude that a method that equips researchers to investigate the transient change of myofilament Ca2+ sensitivity is still needed. We propose that such a method will involve simultaneous measurements of cytosolic Ca2+ and TnC activation in actively twitching muscle and a biophysical model to interpret these data.