Colloidal Synthesis of Cu3N Nanorods and Construction of Cu3N-Cu2O Heteronanostructures via Epitaxial Growth.

The synthesis of transition metal nitrides nanocrystals (TMNs NCs) has posed a significant challenge due to the limited reactivity of nitrogen sources at lower temperatures and the scarcity of available synthesis methods. In this study, we present a novel colloidal synthesis strategy for the fabrication of Cu3N nanorods (NRs). It is found that the trace oxygen (O2) plays an important role in the synthesis process. And a new mechanism for the formation of Cu3N is proposed. Subsequently, by employing secondary lateral epitaxial growth, the Cu3N-Cu2O heteronanostructures (HNs) can be prepared. The Cu3N NRs and Cu3N-Cu2O HNs were evaluated as precursor electrocatalysts for the CO2 reduction reaction (CO2RR). The Cu3N-Cu2O HNs demonstrate remarkable selectivity and stability with ethylene (C2H4) Faradaic efficiency (FE) up to 55.3%, surpassing that of Cu3N NRs. This study provides innovative insights into the reaction mechanism of colloidal synthesis of TMNs NCs and presents alternative options for designing cost-effective electrocatalysts to achieve carbon neutrality.

Mn-Incorporation-Induced Phase Transition in Bottom-Up Synthesized Colloidal Sub-1-nm Ni(OH)2 Nanosheets for Enhanced Oxygen Evolution Catalysis.

Sub-1-nm structures are attractive for diverse applications owing to their unique properties compared to those of conventional nanomaterials. Transition-metal hydroxides are promising catalysts for oxygen evolution reaction (OER), yet there remains difficulty in directly fabricating these materials within the sub-1-nm regime, and the realization of their composition and phase tuning is even more challenging. Here we define a binary-soft-template-mediated colloidal synthesis of phase-selective Ni(OH)2 ultrathin nanosheets (UNSs) with 0.9 nm thickness induced by Mn incorporation. The synergistic interplay between binary components of the soft template is crucial to their formation. The unsaturated coordination environment and favorable electronic structures of these UNSs, together with in situ phase transition and active site evolution confined by the ultrathin framework, enable efficient and robust OER electrocatalysis. They exhibit a low overpotential of 309 mV at 100 mA cm-2 as well as remarkable long-term stability, representing one of the most high-performance noble-metal-free catalysts.

Region-Controlled Framework Interface Mediated Anion Exchange Chemical Transformation to Designed Metal Phosphosulfide Heteronanostructures.

Postsynthetic chemical transformation provides a powerful platform for creating heteronanostructures (HNs) with well-defined materials and interfaces that generate synergy or enhancement. However, it remains a synthetic bottleneck for the precise construction of HNs with increased degrees of complexity and more elaborate functions in a predictable manner. Herein, we define a general transformative protocol for metal phosphosulfide HNs based on tunable hexagonal Cu1.81S frameworks with corner-, edge- and face-controlled growth of Co2P domains. The region-controlled Cu1.81S-Co2P framework interfaces can serve as "kinetic barriers" in mediating the direction and rate between P and S anion exchange reactions, thus leading to a family of morphology and phase designed Cu3P1-xSx-Co2P HNs with hollow (branched, dotted and crown), porous and core-shell architectures. This study reveals the internal transformation mechanism between metal sulfide and phosphide nanocrystals, and opens up a new way for the rational synthesis of metastable HNs that are otherwise inaccessible.

Phase Transformation from Amorphous RuSx to Ru-RuS2 Hybrid Nanostructure for Efficient Water Splitting in Alkaline Media.

Ruthenium (Ru)-based materials, as a class of efficient hydrogen evolution reaction (HER) catalysts, play an important role in hydrogen generation by electrolysis of water in an alkaline solution for clean hydrogen energy. Hybrid nanostructure (HN) materials, which include two or more components with distinct functionality, show better performance than their individual materials, since HN materials can potentially integrate their advantages and overcome the weaknesses. However, it remains a challenge to construct Ru-based HN materials with desired crystal phases for enhanced HER performances. Herein, a series of new Ru-based HN materials (t-Ru-RuS2, S-Ru-RuS2, and T-Ru-RuS2) through phase engineering of nanomaterials (PEN) and chemical transformation are designed to achieve highly efficient HER properties. Owing to the plentiful formation of heterojunctions and amorphous/crystalline interfaces, the t-Ru-RuS2 HN delivers the most outstanding overpotential of 16 mV and owns a small Tafel slope of 29 mV dec-1 at a current density of 10 mA cm-2, which exceeds commercial Pt/C catalysts (34 mV, 38 mV dec-1). This work shows a new insight for HN and provides alternative opportunities in designing advanced electrocatalysts with low cost for HER in the hydrogen economy.

Selective-Epitaxial Hybrid of Tripartite Semiconducting Sulfides for Enhanced Solar-to-Hydrogen Conversion.

The design and synthesis of advanced semiconductors is crucial for the full utilization of solar energy. Herein, colloidal selective-epitaxial hybrid of tripartite semiconducting sulfides CuInS2 Cd(In)SMoS2 heteronanostructures (HNs) via lateral- and vertical-epitaxial growths, followed by cation exchange reactions, are reported. The lateral-epitaxial CuInS2 and Cd(In)S enable effective visible to near-infrared (NIR) solar spectrum absorption, and the vertical-epitaxial ultrathin MoS2 offer sufficient edge sulfur sites for the hydrogen evolution reaction (HER). Furthermore, the integrated structures exhibit unique epitaxial-staggered type II band alignments for continuous charge separation. They achieve the H2 evolution rate up to 8 mmol h-1 g-1 , which is ≈35 times higher than bare CdS and show no deactivation after long-term cycling, representing one of the most efficient and robust noble-metal-free photocatalysts. This design principle and transformation protocol open a new way for creating all-in-one multifunctional catalysts in a predictable manner.

Soft chemistry of metastable metal chalcogenide nanomaterials.

The metastable nature of metal chalcogenide nanomaterials (MCNs) provides us with fresh perspectives and plentiful grounds in the search of new strategies for physicochemical tuning. In the past decade, numerous efforts have been devoted to synthesizing and modifying diverse emerging MCNs based on their "soft chemistry", that is, gently regulating the composition, structure, phase, and interface while not entirely disrupting the original features. This tutorial review focuses on design principles based on the metastability of MCNs, such as ion mobility and vacancy, thermal and structural instability, chemical reactivity, and phase transition, together with corresponding soft chemical approaches, including ion-exchange, catalytic growth, segregation or coupling, template grafting or transformation, and crystal-phase engineering, and summarizes recent advances in their preparation and modification. Finally, prospects for the future development of soft chemistry-directed synthetic guidelines and metastable metal chalcogenide-derived nanomaterials are proposed and highlighted.

Regioselective Construction of Chemically Transformed Phosphide-Metal Nanoheterostructures for Enhanced Hydrogen Evolution Catalysis.

Engineering nanoheterostructures (NHs) plays a key role in exploring novel or enhanced physicochemical properties of nanocrystals. Despite previously reported synthetic methodologies, selective synthesis of NHs to achieve the anticipated composition and interface is still challenging. Herein, we presented a colloidal strategy for the regioselective construction of typical Ag-Co2P NHs with precisely controlled location of Ag nanoparticles (NPs) on unique chemically transformed Co2P nanorods (NRs) by simply changing the ratio of different surfactants. As a proof-of-concept study, the constructed heterointerface-dependent hydrogen evolution reaction (HER) catalysis was demonstrated. The multiple Ag NP-tipped Co2P NRs exhibited the best HER performance, due to their more exposed active sites and the synergistic effect at the interfaces. Our results open up new avenues in rational design and fabrication of NHs with delicate control over the spatial distribution and interfaces between different components.

Recent Advances in Ultrathin Two-Dimensional Nanomaterials.

Since the discovery of mechanically exfoliated graphene in 2004, research on ultrathin two-dimensional (2D) nanomaterials has grown exponentially in the fields of condensed matter physics, material science, chemistry, and nanotechnology. Highlighting their compelling physical, chemical, electronic, and optical properties, as well as their various potential applications, in this Review, we summarize the state-of-art progress on the ultrathin 2D nanomaterials with a particular emphasis on their recent advances. First, we introduce the unique advances on ultrathin 2D nanomaterials, followed by the description of their composition and crystal structures. The assortments of their synthetic methods are then summarized, including insights on their advantages and limitations, alongside some recommendations on suitable characterization techniques. We also discuss in detail the utilization of these ultrathin 2D nanomaterials for wide ranges of potential applications among the electronics/optoelectronics, electrocatalysis, batteries, supercapacitors, solar cells, photocatalysis, and sensing platforms. Finally, the challenges and outlooks in this promising field are featured on the basis of its current development.

Edge Epitaxy of Two-Dimensional MoSe2 and MoS2 Nanosheets on One-Dimensional Nanowires.

Rational design and synthesis of heterostructures based on transition metal dichalcogenides (TMDs) have attracted increasing interests because of their promising applications in electronics, catalysis, etc. However, the construction of epitaxial heterostructures with an interface at the edges of TMD nanosheets (NSs) still remains a great challenge. Here, we report a strategy for controlled synthesis of a new type of heterostructure in which TMD NSs, including MoS2 and MoSe2, vertically grow along the longitudinal direction of one-dimensional (1D) Cu2-xS nanowires (NWs) in an epitaxial manner. The obtained Cu2-xS-TMD heterostructures with tunable loading amount and lateral size of TMD NSs are achieved by the consecutive growth of TMD NSs on Cu2-xS NWs through gradual injection of chalcogen precursors. After cation exchange of Cu in Cu2-xS-TMD heterostructures with Cd, the obtained CdS-MoS2 heterostructures retained their original architectures. Compared to the pure CdS NWs, the CdS-MoS2 heterostructures with 7.7 wt % loading of MoS2 NSs exhibit the best performance in the photocatalytic hydrogen evolution reaction with a H2 production rate up to 4647 µmol·h-1·g-1, about 58 times that catalyzed with pure CdS NWs. Our synthetic strategy opens up a new way for the controlled synthesis of TMD-based heterostructures, which could have various promising applications.

Preparation of Superhydrophilic and Underwater Superoleophobic Nanofiber-Based Meshes from Waste Glass for Multifunctional Oil/Water Separation.

The deterioration of water resources due to oil pollution, arising from oil spills, industrial oily wastewater discharge, etc., urgently requires the development of novel functional materials for highly efficient water remediation. Recently, superhydrophilic and underwater superoleophobic materials have drawn significant attention due to their low oil adhesion and selective oil/water separation. However, it is still a challenge to prepare low-cost, environmentally friendly, and multifunctional materials with superhydrophilicity and underwater superoleophobicity, which can be stably used for oil/water separation under harsh working conditions. Here, the preparation of nanofiber-based meshes derived from waste glass through a green and sustainable route is demonstrated. The resulting meshes exhibit excellent performance in the selective separation of a wide range of oil/water mixtures. Importantly, these meshes can also maintain the superwetting property and high oil/water separation efficiency under various harsh conditions. Furthermore, the as-prepared mesh can remove water-soluble contaminants simultaneously during the oil/water separation process, leading to multifunctional water purification. The low-cost and environmentally friendly fabrication, harsh-environment resistance, and multifunctional characteristics make these nanofiber-based meshes promising toward oil/water separation under practical conditions.

Anodized Aluminum Oxide Templated Synthesis of Metal-Organic Frameworks Used as Membrane Reactors.

The incorporation of metal-organic frameworks (MOFs) into membrane-shaped architectures is of great importance for practical applications. The currently synthesized MOF-based membranes show many disadvantages, such as poor compatibility, low dispersity, and instability, which severely limit their utility. Herein, we present a general, facile, and robust approach for the synthesis of MOF-based composite membranes through the in situ growth of MOF plates in the channels of anodized aluminum oxide (AAO) membranes. After being used as catalysis reactors, they exhibit high catalytic performance and stability in the Knoevenagel condensation reaction. The high catalytic performance might be attributed to the intrinsic structure of MOF-based composite membranes, which can remove the products from the reaction zone quickly, and prevent the aggregation and loss of catalysts during reaction and recycling process.

Synthesis of WOn -WX2 (n=2.7, 2.9; X=S, Se) Heterostructures for Highly Efficient Green Quantum Dot Light-Emitting Diodes.

Preparation of two-dimensional (2D) heterostructures is important not only fundamentally, but also technologically for applications in electronics and optoelectronics. Herein, we report a facile colloidal method for the synthesis of WOn -WX2 (n=2.7, 2.9; X=S, Se) heterostructures by sulfurization or selenization of WOn nanomaterials. The WOn -WX2 heterostructures are composed of WO2.9 nanoparticles (NPs) or WO2.7 nanowires (NWs) grown together with single- or few-layer WX2 nanosheets (NSs). As a proof-of-concept application, the WOn -WX2 heterostructures are used as the anode interfacial buffer layer for green quantum dot light-emitting diodes (QLEDs). The QLED prepared with WO2.9 NP-WSe2 NS heterostructures achieves external quantum efficiency (EQE) of 8.53 %. To our knowledge, this is the highest efficiency in the reported green QLEDs using inorganic materials as the hole injection layer.

Preparation of Ultrathin Two-Dimensional Tix Ta1-x Sy Oz Nanosheets as Highly Efficient Photothermal Agents.

Although two-dimensional (2D) metal oxide/sulfide hybrid nanostructures have been synthesized, the facile preparation of ultrathin 2D nanosheets in high yield still remains a challenge. Herein, we report the first high-yield preparation of solution-processed ultrathin 2D metal oxide/sulfide hybrid nanosheets, that is, Tix Ta1-x Sy Oz (x=0.71, 0.49, and 0.30), from Tix Ta1-x S2 precursors. The nanosheet exhibits strong absorbance in the near-infrared region, giving a large extinction coefficient of 54.1 L g-1 cm-1 at 808 nm, and a high photothermal conversion efficiency of 39.2 %. After modification with lipoic acid-conjugated polyethylene glycol, the nanosheet is a suitable photothermal agent for treatment of cancer cells under 808 nm laser irradiation. This work provides a facile and general method for the preparation of 2D metal oxide/sulfide hybrid nanosheets.

Precursor Triggering Synthesis of Self-Coupled Sulfide Polymorphs with Enhanced Photoelectrochemical Properties.

Heteronanostructures have attracted intensive attention due to their electronic coupling effects between distinct components. Despite tremendous advances of nanostructure fabrication, combining independent polymorphs by forming heterojunction is still challenging but fascinating, such as copper sulfides (Cu2-xS), exhibiting varying band gaps and crystal structures with various stoichiometries. Herein, self-coupled Cu2-xS polymorphs (Cu1.94S-CuS) by a facile one-pot chemical transformation route have been reported for the first time. Unprecedentedly, a manganous precursor plays a crucial role in inducing and directing the formation of such a dumbbell-like architecture, which combines 1D Cu1.94S with 2D CuS. During the transformation, Mn2+ ions mediate the Cu+ ions diffusion and phase conversion process particularly. Furthermore, this self-coupled polymorphic structure exhibits significantly enhanced photoelectrochemical properties compared with the individual Cu1.94S nanocrystals and CuS nanoplates, originating from the unique heterointerfaces constructed by intrinsic band alignment and the enhanced contact between high conductivity hexagonal planes and the working electrode revealed by density functional theory (DFT) calculations. So we anticipate this emerging interfacial charge separation could provide useful hints for applications in optoelectronic devices or photocatalysis.

A trialkylphosphine-driven chemical transformation route to Ag- and Bi-based chalcogenides.

From the standpoint of chemistry, the metastable nature of nanocrystals provides us plentiful ground for the research of new nanoscale structural transformations. Herein, we report a new phenomenon that trialkylphosphine (TAP) can extract the Ag(+) and Bi(3+) from their nanostructural chalcogenides and reduce them to the zerovalent state. Based on this principle, a trialkylphosphine-driven chemical transformation route has been developed for the synthesis of a series of metals and metal-sulfide heterostructures with multiple sulfides as the precursors. Using this reaction principle, Ag, Bi, Ag-Ni3S2, Ag-ZnS, Ag-AgInS2, Ag-Bi, and Bi-Cu7S4 nanostructures can be successively synthesized. These Ag- or Bi-based metal chalcogenide heteronanostructures with interesting optical properties or multifunctionalities could be of special interest for a variety of applications, including high-performance catalysis, biological and biomedical sensing, photovoltaic devices, and a new generation of optoelectronic devices.

Colloidal synthesis of ternary AgFeS2 nanocrystals and their transformation to Ag2S-Fe7S8 heterodimers.

Ternary-/hetero-nanocrystals: a facile one-pot colloidal route for controlled synthesis of ternary AgFeS2 nanocrystals, which have a band gap of 1.21 eV, is presented for the first time. Such ternary AgFeS2 nanocrystals can transform to Ag2 S-Fe7 S8 heterodimers by internal thermal reaction at elevated temperature, providing a new route to synthesize semiconductor hetero-nanostructures.

One-pot controlled synthesis of hexagonal-prismatic Cu1.94S-ZnS, Cu1.94S-ZnS-Cu1.94S, and Cu1.94S-ZnS-Cu1.94S-ZnS-Cu1.94S heteronanostructures.

Playing six-a-side: Complex hexagonal prism Cu(1.94)S-ZnS heteronanostructures were synthesized by a colloidal route. Cu(1.94)S-ZnS, Cu(1.94)S-ZnS-Cu(1.94)S, and Cu(1.94)S-ZnS-Cu(1.94)S-ZnS-Cu(1.94)S structures are formed with screw-, dumbbell-, and sandwich-like shapes by using CuI and [Zn(S(2)CNEt(2))(2)] as precursors in oleylamine.

A General Method for the Synthesis of Hybrid Nanostructures Using MoSe2 Nanosheet-Assembled Nanospheres as Templates.

The layered transition metal dichalcogenides (TMDs) and transition metal phosphides are low-cost, earth-abundant, and robust electrocatalysts for hydrogen evolution reaction (HER). Integrating them into hybrid nanostructures is potentially promising to further boost the catalytic activity toward HER based on their synergistic effects. Herein, we report a general method for the synthesis of a series of MoSe2-based hybrid nanostructures, including MoSe2-Ni2P, MoSe2-Co2P, MoSe2-Ni, MoSe2-Co, and MoSe2-NiS, by postgrowth of Ni2P, Co2P, Ni, Co, and NiS nanostructures on the presynthesized MoSe2 nanosheet-assembled nanospheres, respectively, via a colloidal synthesis method. As a proof-of-concept application, the as-synthesized hybrid nanostructures are used as electrocatalysts for HER, exhibiting high activity and stability in acidic media. Among them, the MoSe2-Co2P composite shows the highest HER activity with an overpotential of 167 mV at 10 mA cm-2.

Preparation of High-Percentage 1T-Phase Transition Metal Dichalcogenide Nanodots for Electrochemical Hydrogen Evolution.

Nanostructured transition metal dichalcogenides (TMDs) are proven to be efficient and robust earth-abundant electrocatalysts to potentially replace precious platinum-based catalysts for the hydrogen evolution reaction (HER). However, the catalytic efficiency of reported TMD catalysts is still limited by their low-density active sites, low conductivity, and/or uncleaned surface. Herein, a general and facile method is reported for high-yield, large-scale production of water-dispersed, ultrasmall-sized, high-percentage 1T-phase, single-layer TMD nanodots with high-density active edge sites and clean surface, including MoS2 , WS2 , MoSe2 , Mo0.5 W0.5 S2 , and MoSSe, which exhibit much enhanced electrochemical HER performances as compared to their corresponding nanosheets. Impressively, the obtained MoSSe nanodots achieve a low overpotential of -140 mV at current density of 10 mA cm-2 , a Tafel slope of 40 mV dec-1 , and excellent long-term durability. The experimental and theoretical results suggest that the excellent catalytic activity of MoSSe nanodots is attributed to the high-density active edge sites, high-percentage metallic 1T phase, alloying effect and basal-plane Se-vacancy. This work provides a universal and effective way toward the synthesis of TMD nanostructures with abundant active sites for electrocatalysis, which can also be used for other applications such as batteries, sensors, and bioimaging.

Growth of Au Nanoparticles on 2D Metalloporphyrinic Metal-Organic Framework Nanosheets Used as Biomimetic Catalysts for Cascade Reactions.

Inspired by the multiple functions of natural multienzyme systems, a new kind of hybrid nanosheet is designed and synthesized, i.e., ultrasmall Au nanoparticles (NPs) grown on 2D metalloporphyrinic metal-organic framework (MOF) nanosheets. Since 2D metalloporphyrinic MOF nanosheets can act as the peroxidase mimics and Au NPs can serve as artificial glucose oxidase, the hybrid nanosheets are used to mimic the natural enzymes and catalyze the cascade reactions. Furthermore, the synthesized hybrid nanosheets are used to detect biomolecules, such as glucose. This study paves a new avenue to design nanomaterial-based biomimetic catalysts with multiple complex functions.