RESUMO
Direct reprogramming of cardiac fibroblasts to induced cardiomyocytes (iCMs) is a promising approach to cardiac regeneration. However, the low yield of reprogrammed cells and the underlying epigenetic barriers limit its potential. Epigenetic control of gene regulation is a primary factor in maintaining cellular identities. For instance, DNA methylation controls cell differentiation in adults, establishing that epigenetic factors are crucial for sustaining altered gene expression patterns with subsequent rounds of cell division. This study attempts to demonstrate that 5'AZA and miR-133a encapsulated in PLGA-PEI nanocarriers induce direct epigenetic reprogramming of cardiac fibroblasts to cardiomyocyte-like cells. The results present a cardiomyocyte-like phenotype following seven days of the co-delivery of 5'AZA and miR-133a nanoformulation into human cardiac fibroblasts. Further evaluation of the global DNA methylation showed a decreased global 5-methylcytosine (5-medCyd) levels in the 5'AZA and 5'AZA/miR-133a treatment group compared to the untreated group and cells with void nanocarriers. These results suggest that the co-delivery of 5'AZA and miR-133a nanoformulation can induce the direct reprogramming of cardiac fibroblasts to cardiomyocyte-like cells in-vitro, in addition to demonstrating the influence of miR-133a and 5'AZA as epigenetic regulators in dictating cell fate.
Assuntos
MicroRNAs , Humanos , Reprogramação Celular/genética , Metilação de DNA , Fibroblastos/metabolismo , Regulação da Expressão Gênica , MicroRNAs/genética , MicroRNAs/metabolismo , Miócitos Cardíacos/metabolismo , Azacitidina/metabolismoRESUMO
The possibility for an ecologically friendly and simple production of gold nanoparticles (AuNPs) with Chaga mushroom (Inonotus obliquus) (Ch-AuNPs) is presented in this study. Chaga extract's reducing potential was evaluated at varied concentrations and temperatures. The nanoparticles synthesized were all under 20 nm in size, as measured by TEM, which is a commendable result for a spontaneous synthesis method utilizing a biological source. The Ch-AuNPs showed anti-cancer chemotherapeutic effects on human brain cancer cells which is attributed to the biofunctionalization of the AuNPs with Chaga bioactive components during the synthesis process. Further, the photothermal ablation capability of the as-prepared gold nanoparticles on human brain cancer cells was investigated. It was found that the NIR-laser induced thermal ablation of cancer cells was effective in eliminating over 80% of the cells. This research projects the Ch-AuNPs as promising, dual modal (chemo-photothermal) therapeutic candidates for anti-cancer applications.
Assuntos
Neoplasias Encefálicas/tratamento farmacológico , Ouro/química , Ouro/farmacologia , Inonotus/metabolismo , Nanopartículas Metálicas/administração & dosagem , Nanopartículas Metálicas/química , Agaricales/efeitos dos fármacos , Linhagem Celular , Linhagem Celular Tumoral , Sobrevivência Celular/efeitos dos fármacos , Humanos , Hipertermia Induzida/métodosRESUMO
Combining the electrophoresis and conventional Coulter methods, we previously proposed the electrophoretic Coulter method (ECM), enabling simultaneous analysis of the size, number, and zeta potential of individual specimens. We validated the ECM experimentally using standard polystyrene particles and red blood cells (RBCs) from sheep; the latter was the first ECM application to biological particles in biotechnology research. However, specimens are prevented from passing through the ECM module aperture, which prevents accurate determination of the zeta potential of each specimen. This problem is caused by electro-osmotic flow (EOF) due to the high zeta potential at the ECM microchannel surfaces. To significantly improve ECM feasibility for biomedicine, we here propose a method to estimate the zeta potential at the ECM microchannel surfaces separate from the zeta potential of each specimen, by investigating the electric-field dependence of the specimen's experimental electrophoretic velocity. We minimize the zeta potential at the microchannel surfaces by applying an organic-molecule coating, and we suppress the surface zeta potential and its resultant EOF by optimizing the microchannel geometry. We demonstrate that the ECM can distinguish between different biological cells using the differences in zeta potential values and/or sizes. We also demonstrate that the ECM can determine the number of biomolecules attached to individual cells and identify whether the average cell state in an analyzed vial is alive or dead. The high-performance ECM can detect cellular morphology alterations, improve immunologic test sensitivity, and identify cell states (living, dying, and dead); this information is clinically useful for early diagnosis and its follow-up.
Assuntos
Apoptose , Células Cultivadas , Eletroforese Capilar/instrumentação , Humanos , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
It still remains a crucial challenge to actively control carbon nanotube (CNT) structure such as the alignment, area density, diameter, length, chirality, and number of walls. Here, we synthesize an ultradense forest of CNTs of a uniform internal diameter by the plasma-enhanced chemical vapor deposition (PECVD) method using hollow nanoparticles (HNPs) modified with ligand as a catalyst. The diameters of the HNPs and internal cavities in the HNPs are uniform. A monolayer of densely packed HNPs is self-assembled on a silicon substrate by spin coating. HNPs shrink via the collapse of the internal cavities and phase transition from iron oxide to metallic iron in hydrogen plasma during the PECVD process. Agglomeration of catalytic NPs is avoided on account of the shrinkage of the NPs and ligand attached to the NPs. Diffusion of NPs into the substrate, which would inactivate the growth of CNTs, is also avoided on account of the ligand. As a result, an ultradense forest of triple-walled CNTs of a uniform internal diameter is successfully synthesized. The area density of the grown CNTs is as high as 0.6 × 10(12) cm(-2). Finally, the activity of the catalytic NPs and the NP/carbon interactions during the growth process of CNTs are investigated and discussed. We believe that the present approach may make a great contribution to the development of an innovative synthetic method for CNTs with selective properties.
Assuntos
Nanopartículas de Magnetita/química , Nanotecnologia/métodos , Nanotubos de Carbono/química , CatáliseRESUMO
Wide-bandgap gallium nitride (GaN)-based semiconductors offer significant advantages over traditional Si-based semiconductors in terms of high-power and high-frequency operations. As it has superior properties, such as high operating temperatures, high-frequency operation, high breakdown electric field, and enhanced radiation resistance, GaN is applied in various fields, such as power electronic devices, renewable energy systems, light-emitting diodes, and radio frequency (RF) electronic devices. For example, GaN-based high-electron-mobility transistors (HEMTs) are used widely in various applications, such as 5G cellular networks, satellite communication, and radar systems. When a current flows through the transistor channels during operation, the self-heating effect (SHE) deriving from joule heat generation causes a significant increase in the temperature. Increases in the channel temperature reduce the carrier mobility and cause a shift in the threshold voltage, resulting in significant performance degradation. Moreover, temperature increases cause substantial lifetime reductions. Accordingly, GaN-based HEMTs are operated at a low power, although they have demonstrated high RF output power potential. The SHE is expected to be even more important in future advanced technology designs, such as gate-all-around field-effect transistor (GAAFET) and three-dimensional (3D) IC architectures. Materials with high thermal conductivities, such as silicon carbide (SiC) and diamond, are good candidates as substrates for heat dissipation in GaN-based semiconductors. However, the thermal boundary resistance (TBR) of the GaN/substrate interface is a bottleneck for heat dissipation. This bottleneck should be reduced optimally to enable full employment of the high thermal conductivity of the substrates. Here, we comprehensively review the experimental and simulation studies that report TBRs in GaN-on-SiC and GaN-on-diamond devices. The effects of the growth methods, growth conditions, integration methods, and interlayer structures on the TBR are summarized. This study provides guidelines for decreasing the TBR for thermal management in the design and implementation of GaN-based semiconductor devices.
RESUMO
Internalisation of nanoparticles conjugated with cell penetrating peptides is a promising approach to various drug delivery applications. Cell penetrating peptides such as transactivating transcriptional activator (TAT) peptides derived from HIV-1 proteins are effective intracellular delivery vectors for a wide range of nanoparticles and pharmaceutical agents thanks to their amicable ability to enter cells and minimum cytotoxicity. Although different mechanisms of intracellular uptake and localisation have been proposed for TAT conjugated nanoparticles, it is necessary to visualise the particles on a 3-D plane in order to investigate the actual intracellular uptake and localisation. Here, we study the intracellular localisation and trafficking of TAT peptide conjugated superparamagnetic ion oxide nanoparticles (TAT-SPIONs) using 3-D electron tomography. 3-D tomograms clearly show the location of TAT-SPIONs in a cell and their slow release from the endocytic vesicles into the cytoplasm. The present methodology may well be utilised for further investigations of the behaviours of nanoparticles in cells and eventually for the development of nano drug delivery systems.
Assuntos
Compostos Férricos/metabolismo , Nanopartículas de Magnetita , Fragmentos de Peptídeos/metabolismo , Produtos do Gene tat do Vírus da Imunodeficiência Humana/metabolismo , Transporte Biológico , Linhagem Celular Tumoral , Citoplasma/metabolismo , Sistemas de Liberação de Medicamentos , Tomografia com Microscopia Eletrônica , Compostos Férricos/química , Humanos , Fragmentos de Peptídeos/química , Vesículas Transportadoras/metabolismo , Produtos do Gene tat do Vírus da Imunodeficiência Humana/químicaRESUMO
The standard scaffold-mediated delivery of drugs/biomolecules has been successful due to the unique attributes of scaffolds, specifically the electrospun polymeric scaffolds that mimic ECM are well suited for advanced regenerative applications. Cardiac tissue engineering includes the interpretation of cellular and molecular mechanisms concerning heart regeneration and identifying an efficient reprogramming strategy to overcome the limitation of delivery systems and enhance the reprogramming efficiency. This study is a step towards developing a functional scaffold through a parallel interpretation of electrospun PLLA scaffolds with two distinct topologies to achieve sustained delivery of two muscle-specific microRNAs (miR-1 and miR-133a) to directly reprogram the adult human cardiac fibroblasts into cardiomyocyte-like cells. Polyethyleneimine was used to form stable PEI-miRNA complexes through electrostatic interactions. These complexes were immobilized on the electrospun smooth and porous scaffolds, where a loading efficiency of ~96% for the fibronectin modified and ~38% for unmodified surfaces was observed, regardless of their surface topology. The in-vitro release experiment exhibited a biphasic release pattern of PEI-miRNA polyplexes from the scaffolds. These dual miRNA scaffold systems proved to be an excellent formulation since their combinatorial effect involving the topographic cues of electrospun fibers, and dual miRNAs helped control the cardiac fibroblast cell fate precisely.
Assuntos
MicroRNAs , Fibroblastos , Humanos , MicroRNAs/genética , Miócitos Cardíacos , Polietilenoimina , Engenharia Tecidual , Alicerces TeciduaisRESUMO
Ischemic heart disease is a predominant cause of death worldwide. The loss or death of cardiomyocytes due to restricted blood flow often results in a cardiac injury. Myofibroblasts replace these injured cardiomyocytes to preserve structural integrity. However, the depleted cardiomyocytes lead to cardiac dysfunction such as pathological cardiac dilation, reduced cardiac contraction, and fibrosis. Repair and regeneration of myocardium are the best possible therapy for end-stage heart failure patients because the current cardiomyocytes restoration therapies are limited to heart transplantation only. The emergence of interests to directly reprogram a mammalian heart with minimal regenerative capacity holds a promising future in the field of cardiovascular regenerative medicine. Repair and regeneration become the two crucial factors in the field of cardiovascular regenerative medicine since heart muscles have no substitutes, like heart valves or blood vessels. Cardiac regeneration includes strategies to reprogram with diverse factors like small molecules, genetic and epigenetic regulators. However, there are some constraints like low efficacy, immunogenic problems, and unsafe delivery systems that pose a daunting challenge in human trial translations. Hence, there is a need for a holistic nanoscale approach in regulating cell fate effectively and efficiently with a safer delivery and a suitable microenvironment that mimics the extracellular matrix. In this review, we have discussed the current state-of-the-art techniques, challenges in direct reprogramming of fibroblasts to cardiac muscle, and prospects of biomaterials in miRNA delivery and cardiac regeneration predominantly during the past decade (2008-2019).
Assuntos
MicroRNAs , Animais , Reprogramação Celular , Humanos , MicroRNAs/genética , Miocárdio , Miócitos Cardíacos , Regeneração , Medicina RegenerativaRESUMO
Cardiac tissue engineering (CTE) aims to generate potential scaffolds to mimic extracellular matrix (ECM) for recreating the injured myocardium. Highly porous scaffolds with properties that aid cell adhesion, migration and proliferation are critical in CTE. In this study, electrospun porous poly (l-lactic acid) (PLLA) porous scaffolds were fabricated and modified with different ECM derived proteins such as collagen, gelatin, fibronectin and poly-L-lysine. Subsequently, adult human cardiac fibroblasts (AHCF) were cultured on the protein modified and unmodified fibers to study the cell behavior and guidance. Further, the cytotoxicity and reactive oxygen species (ROS) assessments of the respective fibers were performed to determine their biocompatibility. Excellent cell adhesion and proliferation of the cardiac fibroblasts was observed on the PLLA porous fibers regardless of the surface modifications. The metabolic rate of cells was on par with the conventional cell culture ware while the proliferation rate surpassed the latter by nearly two-folds. Proteome profiling revealed that apart from being an anchorage platform for cells, the surface topography has modulated significant expression of the cellular proteome with many crucial proteins responsible for cardiac fibroblast growth and proliferation.
RESUMO
In this study, complexes composed of poly-l-tyrosine (pLT) and single-walled carbon nanotubes (SWCNTs) were produced and the dispersibility of the pLT/SWCNT complexes in water by measuring the ζ potential of the complexes and the turbidity of the solution were investigated. It is found that the absolute value of the ζ potential of the pLT/SWCNT complexes is as high as that of SWCNTs modified with double-stranded DNA (dsDNA) and that the complexes remain stably dispersed in the water at least for two weeks. Thermogravimetry analysis (TGA) and visualization of the surface structures of pLT/SWCNT complexes using an atomic force microscope (AFM) were also carried out.