Quantitative text analysis of the mechanisms of tooth injury: Analysis of accidents in five sports that occurred in 15 years under school control.

BACKGROUND/AIM: Dental trauma may occur in school settings and it can impact patients' quality of life. Analysis of the occurrences of dental trauma is essential in identifying preventive methods. There are numerous reports of such accidents but most are quantitative analyses with limited data. The aim of this study was to extract information on the mechanisms of injuries that leads to prevention by performing a qualitative analysis of the occurrence of dental trauma. MATERIAL AND METHODS: After screening 7684 cases of dental injuries that occured in schools and were reported to the Japan Sports Council between 2005 and 2020, 533 detailed descriptions of injuries that occurred during sports were included. Quantitative text analysis was performed on the target data by performing statistical analysis, extracting frequently used words, and creating a co-occurrence network. Injury mechanisms were evaluated based on appearance of words. RESULTS: Dental injuries occurred frequently in five sports included in the survey. They were in order of decreasing frequency: baseball, basketball, soccer, volleyball, and rugby. Males were injured more often in all sports other than volleyball. The number of accidents increased in all sports among high school students. The frequent word list and co-occurrence network were different for each sport. This allowed typical accident occurrence mechanisms to be extracted for these five sports. CONCLUSIONS: Typical accident occurrence mechanisms were extracted from quantitative text analysis targeting free texts on the occurrence of accidents for five sports. Quantitative text analysis is useful for the evaluation of accident cases, which may aid in accident prevention.

Development of a Wearable Mouth Guard Device for Monitoring Teeth Clenching during Exercise.

Teeth clenching during exercise is important for sports performance and health. Recently, several mouth guard (MG)-type wearable devices for exercise were studied because they do not disrupt the exercise. In this study, we developed a wearable MG device with force sensors on both sides of the maxillary first molars to monitor teeth clenching. The force sensor output increased linearly up to 70 N. In four simple occlusion tests, the trends exhibited by the outputs of the MG sensor were consistent with those of an electromyogram (EMG), and the MG device featured sufficient temporal resolution to measure the timing of teeth clenching. When the jaw moved, the MG sensor outputs depended on the sensor position. The MG sensor output from the teeth-grinding test agreed with the video-motion analysis results. It was comparatively difficult to use the EMG because it contained a significant noise level. Finally, the usefulness of the MG sensor was confirmed through an exercise tolerance test. This study indicated that the developed wearable MG device is useful for monitoring clenching timing and duration, and the degree of clenching during exercise, which can contribute to explaining the relationship between teeth clenching and sports performance.

Thickness change and deformation of custom-made mouthguards after two years of use by Bangladeshi field hockey players.

BACKGROUND/AIM: Sports mouthguards are effective devices that prevent dental trauma in sports activities. Players should change mouthguards on a regular basis because of thickness reduction and shape deformation. However, there is no guidance regarding the best timing to change mouthguards. The aims of this study were to analyze the thickness change and deformation of mouthguards after 2 years of use in Bangladesh field hockey players and to consider appropriate evaluation criteria. MATERIAL AND METHODS: Fifty-seven field hockey players belonging to the Bangladesh Sports Education Institute participated in this study. Participants were provided with double-layered mouthguards made of polyolefin-based material using a vacuum-forming machine. Mouthguards were fabricated using 2-mm-thick sheet as the first layer and 3-mm-thick sheet as the second layer. Players used the mouthguards for 2 years. Before and after using the mouthguards, the thicknesses of nine areas were measured. In addition, the lengths of five areas were used to analyze shape deformation. RESULTS: After 2 years, the thicknesses of all measured areas had significantly reduced, and the lengths had significantly increased. Thickness reduction of the posterior-occlusal and anterior-incisal areas and deformation of the posterior-buccal and posterior-palatal areas were significantly larger than those in other measured areas. CONCLUSIONS: Mouthguards should be changed on a regular basis to minimize thickness reduction and deformation. Occlusal and incisal thickness and length of the buccal-posterior area and the palatal-posterior area are factors to be considered in establishing guidelines regarding the timing of mouthguard change.

Effectiveness of computer-assisted learning in sports dentistry: studies over a multiple-year period and at two universities.

INTRODUCTION: Insufficient educational resources on sports dentistry result in varying lecture implementations across dental schools, which cause knowledge gaps amongst students. Thus, a new interactive sports dentistry-related computer-assisted learning (CAL) module was created to facilitate dental school undergraduate students' education. This study compared the CAL module's learning effectiveness with conventional video lectures (VL) and assessed its effectiveness when used over several years at a university, and examined its validation in different university contexts, and students' perceptions. MATERIALS AND METHODS: Participants were 305 fifth-year students. Students from a university in Tokyo participated for 3 years and those from a university in Saitama for 1 year. In each year, the students were divided into two groups-CAL and VL. They studied their assigned modules in 20-min lessons. A written test was administered to determine their knowledge acquisition levels, along with a questionnaire. RESULTS: Two hundred sixty-two consenting participants were included in the statistical analysis. The CAL groups' test scores at both schools were significantly higher than the VL groups' every year (p < .001). Furthermore, test results from all years revealed no gender differences or repetition of the school years at either school. Most students at both universities evaluated the CAL module as excellent. CONCLUSION: The interactive CAL module generated consistently strong results over multiple years, during which it was used by a diverse group of students at two universities. The students highly rated the module's learning process as well as its contents.

The facilitatory effects of hyperbaric oxygen treatment on membrane bone wound healing in a rat calvarial defect model.

We examined the effect of hyperbaric oxygen (HBO2) treatment on bone wound healing in a rat calvarial defect. Critical-sized defects were created in the calvaria of adult Wistar rats. The animals were divided into four groups--HBO2, normobaric oxygen, hyperbaric air, and no treatment. Treatments were performed five days a week, for two weeks. Micro-computerized tomography and histological analysis were used to evaluate the bone defects. Regenerated bone areas were calculated as the percentage of new bone in the cross-sectional area of defect. The new bone cross-sectional area was significantly greater in the HBO2 group than in the other groups. There were no significant differences in the numbers of nucleated cells in the new bone areas. Although new bone volume per defect volume was significantly greater in the HBO2 group than in the other groups, no significant differences in bone mineral density in the new bone area were observed. These findings indicate the facilitatory role of HBO2 treatment on bone wound healing in the rat calvarial bone defect, and it does not appear to have any negative effects on bone maturity. We propose that HBO2 treatment would be useful in promoting bone regeneration following injury in the orofacial region.

Continuous Oral Administration of Sonicated P. gingivalis Delays Rat Skeletal Muscle Healing Post-Treadmill Training.

BACKGROUND: A delay in muscle repair interferes with the effect of training or exercise; therefore, it is important to identify the factors that delay muscle repair. P. gingivalis, one of the most common periodontal disease pathogens, has the potential to inhibit muscle repair after training, as inferred from a previous study. To assess the expression of satellite cells in this in vivo study, we evaluated the relationship between P. gingivalis and muscle regeneration after training. METHODS: A total of 20 male Wistar rats (eight weeks in age) were randomly divided into two groups: one orally administered sonicated P. gingivalis four times per week for six weeks (PG group) and one given no treatment (NT group). After four weeks of training using a treadmill, the gastrocnemius was evaluated using histology of the cross-sectional area (CSA) of myotubes and immunohistochemistry of the expression of skeletal muscle satellite cells. In addition, an endurance test was performed a day before euthanization. RESULTS: The CSA and expression of Pax7+/MyoD- and Pax7+/MyoD+ cells were not significantly different between the groups. However, the expression of Pax7-/MyoD+ cells and running time until exhaustion were significantly lower in the PG group. CONCLUSIONS: Infection with P. gingivalis likely interferes with muscle repair after training.

Useful design of custom-made mouthguard for athletes undergoing orthodontic treatment with brackets and wires.

BACKGROUND/PURPOSE: Custom-made mouthguards (MGs) are strongly recommended for athletes during sports activities to prevent dental injuries. Athletes undergoing orthodontic treatment and wearing brackets require specially designed MGs for better protection and to create more space that will not hinder the planned orthodontic tooth movement. The purpose of this study was to fabricate effective, specially designed, custom-made MGs for patients or athletes with ongoing orthodontic treatment and to evaluate the shock absorption abilities of these MGs by an in vitro comparison of three different designs. MATERIALS AND METHODS: Three different types of specially designed, double-layered MGs, (i) creating inter bracket space inside the MG, (ii) embedding silicon wax inside the MG, and (iii) creating a buffer space with additional hard insertion, were fabricated from a simulated bracket attached model. Impact test was performed using a free-falling object on a vertical rod, and the strain-gauge system was used to assess the strain on the dentition with the MGs for the comparison of the shock absorption abilities of the three types. Analysis of variance at a significance level of 5% and multiple comparisons were performed for statistical analysis. RESULTS: The strains on the dentition with the MG creating buffer space with hard insertion were significantly lower than those with the other two types of MG (P < 0.001). CONCLUSION: Insertion of a hard material and ensuring buffer space between the MG and the teeth and/or appliance was more effective than other methods of fabricating custom-made MGs to prevent sports-related traumatic dental injuries in athletes undergoing orthodontic treatment.

Fabrication technique of obturator-type sports mouthguard for a patient who had undergone maxillectomy and its speech intelligibility assessment:A case report.

PURPOSE: Wearing a sports mouthguard is not only recommended in collision sports, such as American football, boxing, and rugby football, but also in low-contact sports, such as basketball, handball, and soccer. It is recommended to remove oral prosthetic devices while playing sports to avoid the risk of fracturing the device. However, players with maxillectomy must wear obturator-type prosthetic devices for speech, breathing, and deglutition even while playing sports. Therefore, there is a need for an oral appliance to prevent dental injury while playing sports without the risk of fracturing the device for players who have undergone maxillectomy.In this case, we fabricated and proposed overlay-type and obturator-type customized sports mouthguards for a patient who had undergone maxillectomy and assessments of satisfaction, speech intelligibility, nasopharyngeal closure function, and swallowing function while playing soccer. RESULTS: The patient was only satisfied with the obturator-type mouthguard, and the results of the speech intelligibility, nasopharyngeal closure function, and swallowing tests using the obturator-type mouthguard showed no differences compared to those associated with the previously used prosthetic device. CONCLUSIONS: This case may help highlight the importance of providing obturator-type mouthguards for players who have undergone maxillectomy to prevent dental injury and physical and mental discomfort.

Antibacterial effect of a disinfectant spray for sports mouthguards on Streptococcus sobrinus.

BACKGROUND: Mouthguard (MG) disinfectant sprays are available for maintaining MG hygiene. The effect of these sprays against Streptococcus sobrinus is still unknown. The purpose of this study was to evaluate the antibacterial effect of an MG disinfectant spray against S. sobrinus using the modified ISO 22196 standard. MATERIALS AND METHODS: In this in vitro study, we used the following treatment groups for antibacterial testing: MG spray-1 (left in spray for 30 s), MG spray-2 (60 s), and control (n = 4). All analyses were performed at a statistically significant level (P = 0.05) using JMP® 14. RESULTS: The log colony-forming units of the MG spray-2 group were significantly lower than those of the other groups. The antibacterial activity of MG spray-2 against S. sobrinus was >2.1. CONCLUSION: We confirmed the antibacterial effect of the MG spray against S. sobrinus, and it was influenced by the treatment duration, with the optimum effect at a longer duration.

Improving the Wearing Rate of Mouthguards in the Youth Rugby Category Affects the Total Future Mouthguard Wearing Rate.

The aim of this study is to consider the hypothesis that wearing mouthguards (MGs) from a young age helps to shape players' habit of continuing to wear MGs as adults. In addition, we consider the mandatory rule of wearing mouthguards in the youth category on the future wearing rates of mouthguards. Eighty-five Japanese male amateur rugby players were included in this study. We examined the relationship between the wearing rates of mouthguards when participants were high school students and as adults (in 2018) using a questionnaire. Collected data were classified into categories (age, mouthguard type, and applied mandatory rule or not), and their relationships were analyzed. The wearing rate of mouthguards in high school was significantly related to the wearing rate of mouthguards in adulthood (χ2 = 12.1, p < 0.01). The mandatory rule to wear mouthguards at high school was related to the wearing rates of mouthguards as adults, but not significantly (χ2 = 3.42, p = 0.06). Participants' mouthguard wearing rates as adults were affected by their high school wearing rates. The mandatory rule of wearing mouthguards in the youth category may be somewhat effective for improving mouthguard wearing rates; however, it is more important to provide knowledge about their importance.