Three-dimensional printing of transparent fused silica glass.

Glass is one of the most important high-performance materials used for scientific research, in industry and in society, mainly owing to its unmatched optical transparency, outstanding mechanical, chemical and thermal resistance as well as its thermal and electrical insulating properties. However, glasses and especially high-purity glasses such as fused silica glass are notoriously difficult to shape, requiring high-temperature melting and casting processes for macroscopic objects or hazardous chemicals for microscopic features. These drawbacks have made glasses inaccessible to modern manufacturing technologies such as three-dimensional printing (3D printing). Using a casting nanocomposite, here we create transparent fused silica glass components using stereolithography 3D printers at resolutions of a few tens of micrometres. The process uses a photocurable silica nanocomposite that is 3D printed and converted to high-quality fused silica glass via heat treatment. The printed fused silica glass is non-porous, with the optical transparency of commercial fused silica glass, and has a smooth surface with a roughness of a few nanometres. By doping with metal salts, coloured glasses can be created. This work widens the choice of materials for 3D printing, enabling the creation of arbitrary macro- and microstructures in fused silica glass for many applications in both industry and academia.

A haptotaxis assay for leukocytes based on surface-bound chemokine gradients.

The migration of leukocytes in response to chemokine gradients is an important process in the homeostasis of the human immune system and inflammation. In vivo the migration takes place on the surface of the endothelium to which the chemokine gradient is immobilized via interaction with glycosaminoglycans. To study leukocyte migration in response to surface-bound chemokines, we generated chemokine gradients by a simple stamping method: agarose stamps were soaked with chemokine solution to form continuous chemokine gradients by diffusion. These gradients could be easily transferred to a petri dish surface by stamping. We show that neutrophil granulocytes recognize these gradients and migrate toward increasing chemokine concentrations dependent on the slope of the gradient. Single-cell responses were recorded, and statistical analyses of cell behavior and migration were performed. For analysis of chemotaxis/haptotaxis, we propose a chemotactic precision index that is broadly applicable, valid, and allows for a straightforward and rapid quantification of the precision by which cells follow the direction of a given gradient. The presented technique is very simple, cost-efficient, and can be broadly applied for generating defined and reproducible immobilized gradients of almost any protein on surfaces, and it is a valuable tool to study haptotaxis.

Numerics made easy: solving the Navier-Stokes equation for arbitrary channel cross-sections using Microsoft Excel.

The fluid mechanics of microfluidics is distinctively simpler than the fluid mechanics of macroscopic systems. In macroscopic systems effects such as non-laminar flow, convection, gravity etc. need to be accounted for all of which can usually be neglected in microfluidic systems. Still, there exists only a very limited selection of channel cross-sections for which the Navier-Stokes equation for pressure-driven Poiseuille flow can be solved analytically. From these equations, velocity profiles as well as flow rates can be calculated. However, whenever a cross-section is not highly symmetric (rectangular, elliptical or circular) the Navier-Stokes equation can usually not be solved analytically. In all of these cases, numerical methods are required. However, in many instances it is not necessary to turn to complex numerical solver packages for deriving, e.g., the velocity profile of a more complex microfluidic channel cross-section. In this paper, a simple spreadsheet analysis tool (here: Microsoft Excel) will be used to implement a simple numerical scheme which allows solving the Navier-Stokes equation for arbitrary channel cross-sections.

Peptides and Peptide Analogs to Inhibit Protein-Protein Interactions.

Protein-protein interactions are governed by relatively few amino acid residues at the binding interface. Peptides derived from these protein regions may serve as mimics of one of the interaction partners in structural studies or as inhibitors to disrupt the respective interaction and investigate its biological consequences. Inhibitory peptides may also be lead structures for drug development if the respective protein-protein interaction is essential for a pathogen or disease mechanism. Binding peptides may be systematically derived from one of the binding partners or found in the screen of combinatorial peptide libraries. Molecular modelling based on structural data helps to refine existing peptides or even design novel binding peptides. This chapter gives an outline of the binding peptide discovery process and subsequent chemical modifications to further enhance affinity and specificity and to increase stability against degradation in vivo. Examples from the past three decades illustrate the great diversity of applications for protein binding peptides and peptide analogs.

Generation of precision microstructures based on reconfigurable photoresponsive hydrogels for high-resolution polymer replication and microoptics.

Microstructured molds are essential for fabricating various components ranging from precision optics and microstructured surfaces to microfluidics. However, conventional fabrication technology such as photolithography requires expensive equipment and a large number of processing steps. Here, we report a facile method to fabricate micromolds based on a reusable photoresponsive hydrogel: Uniform micropatterns are engraved into the hydrogel surface using photo masks under UV irradiation within a few minutes. Patterns are replicated using polydimethylsiloxane with minimum feature size of 40 µm and smoothness of Rq ~ 3.4 nm. After replication, the patterns can be fully erased by light thus allowing for reuse as a new mold without notable loss in performance. Utilizing greyscale lithography, patterns with different height levels can be produced within the same exposure step. We demonstrate the versatility of this method by fabricating diffractive optical elements devices and a microlens array and microfluidic device with 100 µm wide channels.

Fabrication of Multi-Material Pneumatic Actuators and Microactuators Using Stereolithography.

Pneumatic actuators are of great interest for device miniaturization, microactuators, soft robots, biomedical engineering, and complex control systems. Recently, multi-material actuators have become of high interest to researchers due to their comprehensive range of suitable applications. Three-dimensional (3D) printing of multi-material pneumatic actuators would be the ideal way to fabricate customized actuators, but so far, this is mostly limited to deposition-based methodologies, such as fused deposition modeling (FDM) or Polyjetting. Vat-based stereolithography is one of the most relevant high-resolution 3D printing methods but is only rarely utilized in the multi-material 3D printing of materials. This study demonstrated multi-material stereolithography using combinations of materials with different Young's moduli, i.e., 0.5 MPa and 1.1 GPa, for manufacturing pneumatic actuators and microactuators with a resolution as small as 200 µm. These multi-material actuators have advantages over single-material actuators in terms of their deformation controllability and ease of assembly.

Controllable Wetting Transitions on Photoswitchable Physical Gels.

Softness plays a key role in the deformation of soft elastic substrates at the three-phase contact line, and the acting forces lead to the formation of a wetting ridge due to elastocapillarity. The change in wetting ridge and surface profiles at different softness has a great impact on the droplet behavior in different phenomena. Commonly used materials to study soft wetting are swollen polymeric gels or polymer brushes. These materials offer no possibility to change the softness on demand. Therefore, adjustable surfaces with tunable softness are highly sought-after to achieve on-demand transition between wetting states on soft surfaces. Here, we present a photorheological physical soft gel with adjustable stiffness based on the spiropyran photoswitch that shows the formation of wetting ridges upon droplet deposition. The presented photoswitchable gels allow the creation of reversibly switchable softness patterns with microscale resolution using UV light-switching of the spiropyran molecule. Gels with varying softness are analyzed, showing a decrease in the wetting ridge height at higher gel stiffness. Furthermore, wetting ridges before and after photoswitching are visualized using confocal microscopy, showing the transition in the wetting properties from soft wetting to liquid/liquid wetting.

Influence of Parylene F Coatings on the Wetting Properties of Soft Polydimethylsiloxane (PDMS).

Understanding the wettability of soft surfaces is of key importance for the development of protective and repellent coatings and controlling droplet dynamics when required. There are many factors that affect the wetting and dynamic dewetting behavior of soft surfaces, such as the formation of wetting ridges, the adaptive behavior of the surface caused by the interaction of the fluid with the surface, or the presence of free oligomers that are washed out of the soft surface. In this work, we report the fabrication and characterization of three soft polydimethylsiloxane (PDMS) surfaces with elastic moduli ranging from 7 kPa to 56 kPa. The dynamic dewetting behavior of liquids with different surface tensions was studied on these surfaces, and the data show soft and adaptive wetting behavior of the soft PDMS, as well as the presence of free oligomers. Thin layers of Parylene F (PF) were introduced to the surfaces and their influence on the wetting properties was studied. We show that the thin layers of PF prevent adaptive wetting by preventing the diffusion of liquids into the soft PDMS surfaces and by causing the loss of the soft wetting state. The dewetting properties of the soft PDMS are enhanced, leading to low sliding angles of ≤10° for water, ethylene glycol, and diiodomethane. Therefore, the introduction of a thin PF layer can be used to control wetting states and to increase the dewetting behavior of soft PDMS surfaces.

4D Printed Shape-Memory Elastomer for Thermally Programmable Soft Actuators.

Polymeric shape-memory elastomers can recover to a permeant shape from any programmed deformation under external stimuli. They are mostly cross-linked polymeric materials and can be shaped by three-dimensional (3D) printing. However, 3D printed shape-memory polymers so far only exhibit elasticity above their transition temperature, which results in their programmed shape being inelastic or brittle at lower temperatures. To date, 3D printed shape-memory elastomers with elasticity both below and above their transition temperature remain an elusive goal, which limits the application of shape-memory materials as elastic materials at low temperatures. In this paper, we printed, for the first time, a custom-developed shape-memory elastomer based on polyethylene glycol using digital light processing, which possesses elasticity and stretchability in a wide temperature range, below and above the transition temperature. Young's modulus in these two states can vary significantly, with a difference of up to 2 orders of magnitude. This marked difference in Young's modulus imparts excellent shape-memory properties to the material. The difference in Young's modulus at different temperatures allows for the programming of the pneumatic actuators by heating and softening specific areas. Consequently, a single actuator can exhibit distinct movement modes based on the programming process it undergoes.

Emerging Technologies and Materials for High-Resolution 3D Printing of Microfluidic Chips.

In recent years, 3D printing has had a huge impact on the field of biotechnology: from 3D-printed pharmaceuticals to tissue engineering and microfluidic chips. Microfluidic chips are of particular interest and importance for the field of biotechnology, since they allow for the analysis and screening of a wide range of biomolecules - including single cells, proteins, and DNA. The fabrication of microfluidic chips has historically been time-consuming, however, and is typically limited to 2.5 dimensional structures and a restricted palette of well-known materials. Due to the high surface-to-volume ratios in microfluidic chips, the nature of the chip material is of paramount importance to the final system behavior. With the emergence of 3D printing, however, a wide range of microfluidic systems are now being printed for the first time in a manner that facilitates flexibility while minimizing time and cost. Nevertheless, resolution and material choices still remain challenges and in the focus of current research, aiming for (1) 3D printing with high resolutions in the range of tens of micrometers and (2) a wider range of available materials for these high-resolution prints. The first part of this chapter highlights recent emerging technologies in the field of high-resolution printing via stereolithography (SL) and 2-photon polymerization (2PP) and seeks to identify particularly interesting emerging technologies which could have a major impact on the field in the near future. The second part of this chapter highlights current developments in the field of materials that are used for these high-resolution 3D printing technologies.

Application of Micro/Nanoporous Fluoropolymers with Reduced Bioadhesion in Digital Microfluidics.

Digital microfluidics (DMF) is a versatile platform for conducting a variety of biological and chemical assays. The most commonly used set-up for the actuation of microliter droplets is electrowetting on dielectric (EWOD), where the liquid is moved by an electrostatic force on a dielectric layer. Superhydrophobic materials are promising materials for dielectric layers, especially since the minimum contact between droplet and surface is key for low adhesion of biomolecules, as it causes droplet pinning and cross contamination. However, superhydrophobic surfaces show limitations, such as full wetting transition between Cassie and Wenzel under applied voltage, expensive and complex fabrication and difficult integration into already existing devices. Here we present Fluoropor, a superhydrophobic fluorinated polymer foam with pores on the micro/nanoscale as a dielectric layer in DMF. Fluoropor shows stable wetting properties with no significant changes in the wetting behavior, or full wetting transition, until potentials of 400 V. Furthermore, Fluoropor shows low attachment of biomolecules to the surface upon droplet movement. Due to its simple fabrication process, its resistance to adhesion of biomolecules and the fact it is capable of being integrated and exchanged as thin films into commercial DMF devices, Fluoropor is a promising material for wide application in DMF.

An On-Chip Liquid Metal Plug Generator.

Gallium-based liquid metal nonspherical droplets (plugs) have seen increasing demand recently mainly because their high aspect ratios make them beneficial for a wide range of applications, including microelectromechanical systems (MEMS), microfluidics, sensor technology, radio-frequency devices, actuators, and switches. However, reproducibility of the generation of such plugs, as well as precise control over their size, is yet challenging. In this work, a simple on-chip liquid metal plug generator using a commercially available 3D microprinter is presented and the plug generator in poly(dimethylsiloxane) is replicated via soft lithography. Liquid metal plugs are generated via a combination of electrochemical oxidation, design of well-defined constrictions based on Laplace pressure, and the application of modulated voltage control signals. It is shown that plugs of various aspect ratios can be generated reproducibly for channel widths of 0.5, 0.8, and 1.5 mm with constriction widths of 0.1 mm at 6 V. Laplace-pressure-controlled plugs in constricted channels are compared to modulated-voltage-generated plugs in straight channels showing that this technique provides significantly enhanced reproducibility and control over the size and spacing between the plugs. This work paves the way to sub-millimeter liquid metal plugs generated directly on-chip for on-demand MEMS and microfluidic applications.

Superrepellent Porous Polymer Surfaces by Replication from Wrinkled Polydimethylsiloxane/Parylene F.

Superrepellent surfaces, such as micro/nanostructured surfaces, are of key importance in both academia and industry for emerging applications in areas such as self-cleaning, drag reduction, and oil repellence. Engineering these surfaces is achieved through the combination of the required surface topography, such as porosity, with low-surface-energy materials. The surface topography is crucial for achieving high liquid repellence and low roll-off angles. In general, the combination of micro- and nanostructures is most promising in achieving high repellence. In this work, we report the enhancement of wetting properties of porous polymers by replication from wrinkled Parylene F (PF)-coated polydimethylsiloxane (PDMS). Fluorinated polymer foam "Fluoropor" serves as the low-surface-energy polymer. The wrinkled molds are achieved via the deposition of a thin PF layer onto the soft PDMS substrates. Through consecutive supercritical drying, superrepellent surfaces with a high surface porosity and a high water contact angle (CA) of >165° are achieved. The replicated surfaces show low roll-off angles (ROA) <10° for water and <21° for ethylene glycol. Moreover, the introduction of the micro-wrinkles to Fluoropor not only enhances its liquid repellence for water and ethylene glycol but also for liquids with low surface tension, such as n-hexadecane.

Cell-based actin polymerization assay to analyze chemokine inhibitors.

Chemokines play an important role in various diseases as signaling molecules for immune cells. Therefore, the inhibition of the chemokine-receptor interaction and the characterization of potential inhibitors are important steps in the development of new therapies. Here, we present a new cell-based assay for chemokine-receptor interaction, using chemokine-dependent actin polymerization as a readout. We used interleukin-8 (IL-8, CXCL8) as a model chemokine and measured the IL-8-dependent actin polymerization with Atto565-phalloidin by monitoring the fluorescence intensity in the cell layer after activation with IL-8. This assay needs no transfection, is easy to perform and requires only a few working steps. It can be used to confirm receptor activation and to characterize the effect of chemokine receptor antagonists. Experiments with the well-known CXCR1/2 inhibitor reparixin confirmed that the observed increase in fluorescence intensity is a result of chemokine receptor activation and can be inhibited in a dose-dependent manner. With optimized parameters, the difference between positive and negative control was highly significant and statistical Z´-factors of 0.4 were determined on average.

Two-Photon Polymerization of Nanocomposites for the Fabrication of Transparent Fused Silica Glass Microstructures.

Fused silica glass is the material of choice for many high-performance components in optics due to its high optical transparency combined with its high thermal, chemical, and mechanical stability. Especially, the generation of fused silica microstructures is of high interest for microoptical and biomedical applications. Direct laser writing (DLW) is a suitable technique for generating such devices, as it enables nearly arbitrary structuring down to the sub-micrometer level. In this work, true 3D structuring of transparent fused silica glass using DLW with tens of micrometer resolution and a surface roughness of Ra  ≈ 6 nm is demonstrated. The process uses a two-photon curable silica nanocomposite resin that can be structured by DLW, with the printout being convertible to transparent fused silica glass via thermal debinding and sintering. This technology will enable a plethora of applications from next-generation optics and photonics to microfluidic and biomedical applications with resolutions on the scale of tens of micrometers.

Melt-Extrusion-Based Additive Manufacturing of Transparent Fused Silica Glass.

In recent years, additive manufacturing (AM) of glass has attracted great interest in academia and industry, yet it is still mostly limited to liquid nanocomposite-based approaches for stereolithography, two-photon polymerization, or direct ink writing. Melt-extrusion-based processes, such as fused deposition modeling (FDM), which will allow facile manufacturing of large thin-walled components or simple multimaterial printing processes, are so far inaccessible for AM of transparent fused silica glass. Here, melt-extrusion-based AM of transparent fused silica is introduced by FDM and fused feedstock deposition (FFD) using thermoplastic silica nanocomposites that are converted to transparent glass using debinding and sintering. This will enable printing of previously inaccessible glass structures like high-aspect-ratio (>480) vessels with wall thicknesses down to 250 µm, delicate parts including overhanging features using polymer support structures, as well as dual extrusion for multicolored glasses.

High Resolution Patterning of an Organic-Inorganic Photoresin for the Fabrication of Platinum Microstructures.

Platinum (Pt) is an interesting material for many applications due to its high chemical resilience, outstanding catalytic activity, high electrical conductivity, and high melting point. However, microstructuring and especially 3D microstructuring of platinum is a complex process, based on expensive and specialized equipment often suffering from very slow processing speeds. In this work, organic-inorganic photoresins, which can be structured using direct optical lithography as well as two-photon lithography (TPL) with submicrometer resolution and high-throughput is presented. The printed structures are subsequently converted to high-purity platinum using thermal debinding of the binder and reduction of the salt. With this technique, complex 3D structures with a 3D resolution of 300 nm were fabricated. At a layer thickness of 35 nm, the patterns reach a high conductivity of 67% compared to bulk platinum. Microheaters, thermocouple sensors as well as a Lab-on-a-Chip system are presented as exemplary applications. This technology will enable a broad range of application from electronics, sensing and heating elements to 3D photonics and metamaterials.

High-throughput injection molding of transparent fused silica glass.

Glass is one of the most relevant high-performance materials that has the benefit of a favorable environmental footprint compared with that of other commodity materials. Despite the advantageous properties of glasses, polymers are often favored because they can be processed using scalable industrial replication techniques like injection molding (IM). Glasses are generally processed through melting, which is both energy intensive and technologically challenging. We present a process for glassworks using high-throughput IM of an amorphous silicon dioxide nanocomposite that combines established process technologies and low-energy sintering. We produce highly transparent glass using classical IM and sintering, allowing for a potentially substantial reduction in energy consumption. Our strategy merges polymer and glass processing, with substantial implications for glass utilization.

Facile fabrication of micro-/nanostructured, superhydrophobic membranes with adjustable porosity by 3D printing.

Porous membranes with special wetting properties have attracted great interest due to their various functions and wide applications, including water filtration, selective oil/water separation and oil skimming. Special wetting properties such as superhydrophobicity can be achieved by controlling the surface chemistry as well as the surface topography of a substrate. Three-dimensional (3D) printing is a promising method for the fast and easy generation of various structures. The most common method for 3D printing of superhydrophobic materials is a two-step fabrication process: 3D printing of user-defined topographies, such as surface structures or bulk porosity, followed by a chemical post-processing with low-surface energy chemicals such as fluorinated silanes. Another common method is using a hydrophobic polymer ink to print intricate surface structures. However, the resolution of most common printers is not sufficient to produce nano-/microstructured textures, moreover, the resulting delicate surface micro- or nanostructures are very prone to abrasion. Herein, we report a simple approach for 3D printing of superhydrophobic micro-/nanoporous membranes in a single step, combining the required topography and chemistry. The bulk porosity of this material, which we term "Fluoropor", makes it insensitive to abrasion. To achieve this, a photocurable fluorinated resin is mixed with a porogen mixture and 3D printed using a stereolithography (SLA) printing process. This way, micro-/nanoporous membranes with superhydrophobic properties with static contact angles of 164° are fabricated. The pore size of the membranes can be adjusted from 30 nm to 300 nm by only changing the porogen ratio in the mixture. We show the applicability of the printed membranes for oil/water separation and the formation of Salvinia layers which are of great interest for drag reduction in maritime transportation and fouling prevention.