Experimental guide wire placement for total shoulder arthroplasty in glenoid models: higher precision for patient-specific aiming guides compared to standard technique without learning curve.

BACKGROUND: Patient-specific aiming devices (PSAD) may improve precision and accuracy of glenoid component positioning in total shoulder arthroplasty, especially in degenerative glenoids. The aim of this study was to compare precision and accuracy of guide wire positioning into different glenoid models using a PSAD versus a standard guide. METHODS: Three experienced shoulder surgeons inserted 2.5 mm K-wires into polyurethane cast glenoid models of type Walch A, B and C (in total 180 models). Every surgeon placed guide wires into 10 glenoids of each type with a standard guide by DePuy Synthes in group (I) and with a PSAD in group (II). Deviation from planned version, inclination and entry point was measured, as well as investigation of a possible learning curve. RESULTS: Maximal deviation in version in B- and C-glenoids in (I) was 20.3° versus 4.8° in (II) (p < 0.001) and in inclination was 20.0° in (I) versus 3.7° in (II) (p < 0.001). For B-glenoid, more than 50% of the guide wires in (I) had a version deviation between 11.9° and 20.3° compared to ≤ 2.2° in (II) (p < 0.001). 50% of B- and C-glenoids in (I) showed a median inclination deviation of 4.6° (0.0°-20.0°; p < 0.001) versus 1.8° (0.0°-4.0°; p < 0.001) in (II). Deviation from the entry point was always less than 5.0 mm when using PSAD compared to a maximum of 7.7 mm with the standard guide and was most pronounced in type C (p < 0.001). CONCLUSION: PSAD enhance precision and accuracy of guide wire placement particularly for deformed B and C type glenoids compared to a standard guide in vitro. There was no learning curve for PSAD. However, findings of this study cannot be directly translated to the clinical reality and require further corroboration.

High correlation between inner and outer glenoid circle diameters and its clinical relevance.

PURPOSE: The majority of methods for measuring glenoid bone loss in shoulder instability use the best-fit circle following the inferior glenoid rim. However, there is no precise method on how to draw this circle, particularly in case of a missing rim segment. Defining the radius is a source of substantial error. It was hypothesized that there is a relationship between the best-fit inferior circle (inner circle), defined by Sugaya, and the circle tangent to the supra- and infra-glenoid tubercles (outer circle), defined by Itoi, thus allowing a more consistent appreciation of the paleo-glenoid. METHODS: Ninety-five normal dry scapulae were examined. The specimens were digitally photographed obtaining perpendicular images of the glenoid cavity. Using HOROS® imaging software, a best-fit inferior circle (inner circle) and a second circle fitting the most inferior and superior points of the glenoid (outer circle) were drawn by two investigators. The diameters and areas of the circles were recorded. Two-way random-effects intra-class correlation coefficients (ICC) were used to measure intra- and inter-observer agreement. A Bayesian measurement-error regression model was used to determine the relationship between outer and inner circle measurements. RESULTS: The mean glenoid height was 35.1 mm and the glenoid width 25.6 mm. The mean diameter of the outer circle was 35.7 ± 4.2 mm and the mean diameter of the inner circle was 26.8 ± 3.2 mm. ICC showed excellent inter- and intra-observer agreement for both the outer circle diameter (ICC ≥ 0.95) and inner circle diameter (ICC ≥ 0.93). The two diameters demonstrated a very strong significant Pearson correlation (0.92, p < 0.001) and the regression showed excellent model fit R2 = 0.87. The areas of the two circles were also highly and significantly correlated (r = 0.94; p < 0.001). The ratio of inner circle to outer diameters was 0.74. CONCLUSION: There is a strong correlation between the inner and outer glenoid circle diameters. This study sets the base for the use the combined outer and inner circle and its ratio to better appreciate the paleo-glenoid morphology and thus obtain a more reliable bone loss estimation. Application of this method aids in a more reliable estimation bone loss with potential benefit in surgical decision-making.

Patient-specific instrumentation reduces deviations between planned and postosteotomy humeral retrotorsion and height in shoulder arthroplasty.

BACKGROUND: Patient-specific instrumentation (PSI) may potentially improve humeral osteotomy in shoulder arthroplasty. The purpose of this study was to compare the deviation between planned and postosteotomy humeral inclination, retrotorsion, and height in shoulder arthroplasty, using PSI vs. standard cutting guides (SCG). METHODS: Twenty fresh-frozen cadaveric specimens were allocated to undergo humeral osteotomy using either PSI or SCG, such that the 2 groups have similar age, gender, and side. Preosteotomy computed tomography (CT) scan was performed and used for the 3-dimensional (3D) planning. The osteotomy procedure was performed using a PSI designed for each specimen or an SCG depending on the group. A postosteotomy CT scan was performed. The preosteotomy and postosteotomy 3D CT scan reconstructions were superimposed to calculate the deviation between planned and postosteotomy inclination, retrotorsion, and height. Outliers were defined as cases with 1 or more of the following deviations: >5° inclination, >10° retrotorsion, and >3 mm height. The deviation and outliers in inclination, retrotorsion, and height were compared between the 2 groups. RESULTS: The deviations between planned and postosteotomy parameters were similar among the PSI and SCG groups for inclination (P = .260), whereas they were significantly greater in the SCG group for retrotorsion (P < .001) and height (P = .003). There were 8 outliers in the SCG group, compared with only 1 outlier in the PSI group (P = .005). Most outliers in the SCG group were due to deviation >10° in retrotorsion. CONCLUSION: After 3D planning, PSI had less deviation between planned and postosteotomy humeral retrotorsion and height, relative to SCG.

Posterior subdeltoid and external rotators preserving approach for reduction and fixation of displaced extra-articular fractures of the scapula.

BACKGROUND: Operative management of scapular body fractures, when indicated, typically involves extensive exposure through a posterior approach. We present our experience with a deltoid preserving approach that allows excellent exposure of the fracture lines for reduction and fixation while minimizing muscle detachment and overall tissue trauma. TECHNIQUE: Exposure of the scapula was obtained through a posterior incision. The posterior deltoid was exposed and retracted superiorly while the arm was abducted in accordance with Brodsky et al. The scapula was exposed in the interval between infraspinatus and teres minor. PATIENTS AND METHODS: Six patients were treated using this approach and were retrospectively reviewed. All were men with a mean age of 34 years (range 24-45 ± 6.7 years). The injuries involved two 14-A3.1 and four 14-A3.2 AO/OTA types of fractures. The mean follow-up after surgery was 28 months (range 21-36 ± 4.93 months). RESULTS: All fractures could be anatomically reduced and healed without compromise. The mean Constant score was 93.8 (range 91-97 ± 2.13), while range of motion and strength returned to levels equal to the uninjured shoulder. All patients returned to their previous level of activity. We did not observe atrophy of the posterior muscles or hardware complications, and none required hardware removal. CONCLUSION: The deltoid and external rotators preserving posterior approach permitted good visualization of the fractures while allowing reduction and fixation without extensive muscular dissection and provided excellent functional outcomes. We consider that it offers obvious advantages over more aggressive muscle detaching approaches. LEVEL OF EVIDENCE: Therapeutic study, IV.

Scapular dyskinesis after Latarjet procedure.

BACKGROUND: Because of detachment of the pectoralis minor and variation of the vector of the conjoint tendons, we hypothesized that the Latarjet procedure may alter scapular position and motion. The purpose of this study was to evaluate scapular position and motion in patients who underwent a Latarjet or a modified iliac crest bone graft transfer (ICBGT) procedure (J-bone graft). METHODS: Forty-six consecutive patients treated for recurrent anterior shoulder dislocation between 2010 and 2012 were retrospectively enrolled. Twenty-three were treated with a Latarjet and 23 with an ICBGT procedure. Twenty Latarjet and 20 ICBGT patients were available at a mean follow-up of 20 months (min, 12; max, 60). We recorded the Western Ontario Instability Index, the Rowe Score, and the Subjective Shoulder Value. Scapulothoracic position was studied according to the dyskinesis yes/no method. Intraobserver and interobserver reliability of the dyskinesis assessment was assessed. RESULTS: Intraobserver and interobserver reliability of scapula dyskinesis assessment was high (Latarjet: intratester, κ = 0.84; intertester, κ = 0.75; ICBGT: intratester, κ = 0.78; intertester, κ = 0.71). Scapular dyskinesis was observed after 5 of 20 Latarjet and after 0 of 20 ICBGT procedures (P = .047). Patients with dyskinesis had lower scores (Western Ontario Instability Index, P = .043; Rowe, P = .047; Subjective Shoulder Value, P = .046), but no statistically significant difference was found between the Latarjet and ICBGT groups. Two of the 5 scapular dyskinesis patients reached the SICK (Scapular malposition, Inferior medial scapular winging, Coracoid tenderness, and scapular dysKinesis) scapula syndrome definition. CONCLUSIONS: Scapular dyskinesis was found in 5 of 20 patients who underwent a Latarjet procedure. Dyskinesis may be related to the detachment of the pectoralis minor, and variation of the vector and the working length of the coracobrachialis and the short head of the biceps.

Shoulder prosthetic arthroplasty options in 2014: what to do and when to do it.

The number of shoulder arthroplasty procedures performed in the United States is steadily increasing as a result of an expansion in implant options, clinical indications, and surgical experience. Available options include stemmed implants, short-stemmed or stemless prostheses, fracture-specific designs, resurfacing implants, partial surface replacement, metal-backed or polyethylene glenoid components designed for cementation or bone ingrowth, and reverse total shoulder arthroplasty. Efforts to re-create anatomy, improve outcomes, and avoid complications have resulted in many changes in prosthesis design. Despite these changes, failures still occur, and revision surgery is sometimes necessary. A thorough knowledge of current arthroplasty options, indications, and the principles of implantation is necessary to optimize outcomes after shoulder arthroplasty.

Rim reconstruction with autogenous iliac crest for anterior glenoid deficiency: forty-three instability cases followed for 5-19 years.

BACKGROUND: The purpose of this study was to evaluate the long-term results of instability patients treated with iliac crest graft glenoid augmentation. MATERIALS AND METHODS: Retrospective study including 48 consecutive patients (40 male; mean age 25; range, 17-35). There were 20 primary and 28 revision cases. Three patients declined follow-up examination, and 5 lost to >5 years follow-up. Mean follow-up was 9.2 years (range, 5-19). Reconstruction comprised: iliac crest graft, interposition of the labrum on the burred surface of the graft and capsular re-tensioning. We measured the Oxford Shoulder Instability Score (OSIS) and assessed arthrotic changes and atrophy and fatty infiltration of the subscapularis. RESULTS: 8/43 had residual pain, 3/43 had a subjective sensation of instability, 1/43 had a re-dislocation and required re-intervention. The mean OSIS was 18.1 points (12-50) (n = 40). 1/40 developed postoperative subscapularis insufficiency. The mean subscapularis atrophy was 7.4% (37% atrophy to 27% hypertrophy). 2/40 had a relevant fatty infiltration of the SSC muscle stage III to stage IV. 19/40 had mild and 1/40 had a moderate arthrosis. Arthrosis progressed by 1 stage in 7 of 35 shoulders. The mean residual glenoid defect area was 4.0% (0-13.5) and the mean defect width was 8.3% (range, 0-19.2) (n = 40). CONCLUSION: Glenoid rim reconstruction with iliac crest graft was equally effective for patients with primary repair and for failed previous stabilization. It offered the advantage of an anatomic reconstruction with a comparatively good long-term preservation of the joint line.

A comprehensive classification of proximal humeral fractures: HGLS system.

BACKGROUND: This study assessed the intraobserver and interobserver reliability of a binary classification system using an easy-to-remember acronym (the HGLS system--based on the reappraisal of Codman's description by Hertel et al) and compared it with the AO and Neer systems. MATERIALS AND METHODS: Forty-seven proximal humeral fractures in 47 patients treated at the Department of Orthopaedics and Trauma, Royal Adelaide Hospital, Adelaide, Australia, were identified in the period from July 2007 until January 2008. Fractures of the proximal humerus were examined with anteroposterior, lateral, and axillary radiographs. Three independent reviewers classified the fractures using the AO, Neer, and HGLS systems. Reclassification of the same fractures was undertaken after a 6-month interval, and interobserver and intraobserver correlation, by use of the κ statistic, was calculated for all 3 classification systems. RESULTS: The mean age of patients was 64.5 years (range, 16-95 years). The interobserver correlations for the AO system (κ value, 0.47) and Neer system (κ value, 0.44) were graded as poor and were consistent with the values of previously published studies. The HGLS classification showed good interobserver agreement for all 3 examiners at the first interpretation (κ value, 0.73) and second interpretation (κ value, 0.61). Good intraobserver agreement after a 6-month period was also seen for the HGLS classification (κ values, 0.87-0.92) compared with the AO system (κ, 0.61-0.71) and Neer system (κ, 0.42-0.77). CONCLUSION: The HGLS system provided a more reliable description of fractures of the proximal humerus compared with the Neer and AO systems. Further studies are necessary to assess the validity of the HGLS system.

Similar outcomes for nail versus plate fixation of three-part proximal humeral fractures.

BACKGROUND: There is a lack of consensus regarding optimal surgical management of displaced and unstable three-part proximal humeral fractures. QUESTIONS/PURPOSES: The objective of this prospective observational study was to compare the clinical and radiologic outcomes of plate versus nail fixation of three-part proximal humeral fractures. PATIENTS AND METHODS: Two hundred eleven patients with unstable three-part proximal humeral fractures were treated with ORIF using plate (PHILOS [proximal humeral interlocking system]/LPHP [locking proximal humerus plate]) or nail (PHN [proximal humeral nail]) osteosynthesis. Outcome measurements included pain, Constant and Murley and Neer scores, and the occurrence of complications at 3, 6, and 12 months postsurgery. Regression analysis and the likelihood ratio test were used to evaluate differences between the cohorts. RESULTS: Throughout the 1-year followup period the Constant and Murley scores improved significantly for both cohorts; there was no significant difference between the nail group compared with the plate group. Also, 1-year Neer scores were similar between the two cohorts. Patients in the PHN group perceived significantly less pain compared with patients in the plate fixation group at 3, 6 and 12 months after surgery. We observed 79 local complications in 60 patients with no significant risk difference between the treatment groups; 35 intraoperative complications were directly related to the initial surgical procedure. CONCLUSIONS: The similar 1-year outcomes for nail versus plate fixation of three-part proximal humeral fractures suggest that both techniques may be useful for internal fixation of these fractures. Many complications were related to incorrect surgical technique and therefore can be avoided. Advanced surgical skills and experience are considered to be more critical for successful operative treatment of three-part proximal humeral fractures than the selection of the implant. LEVEL OF EVIDENCE: Level II, therapeutic study (prospective comparative study). See the Guidelines for Authors for a complete description of levels of evidence.

Path analysis of factors for functional outcome at one year in 463 proximal humeral fractures.

BACKGROUND: Path analysis methods were used to test the prognostic value of 10 patient-related and treatment-related factors on the 1-year functional outcome of 463 proximal humeral fractures measured using the Constant score. Complex inter-relationships between these factors were also evaluated. MATERIALS AND METHODS: Data were collected from a prospective cohort study that included 3 operative groups repaired using nail or plate fixation and 1 nonoperative group. From the available information, various factors potentially having a direct influence on the functional Constant score were identified. The process of creating a hypothetical causal path diagram was undertaken to order the factors in a sequence of associations or cause-and-effect relationships. RESULTS: Our final multivariable regression model for the 1-year Constant score included the 6 factors of age, sex, treatment, occurrence of intraoperative and local post-treatment complications, and anatomic restoration. Being a woman aged older than 40 years, treated with a locking proximal humeral plate (LPHP), having experienced intraoperative and local post-treatment complications, and varus deformity of more than 30° were negative predictors of the Constant score (ie, poor shoulder function 1 year after treatment initiation). Three factors, the dominant side fractured and the Neer and AO fracture type, showed only significant association on intermediate factors. The presence of concomitant disease did not show any significant direct or indirect effect. A final pathway outlines these associations and inter-relationships. CONCLUSION: Prevention of local complications, in particular those leading to severe varus deviation, appears essential to improve shoulder function after a proximal humeral fracture.

Proximal humeral fracture classification systems revisited.

HYPOTHESIS: This study evaluated several classification systems and expert surgeons' anatomic understanding of these complex injuries based on a consecutive series of patients. We hypothesized that current proximal humeral fracture classification systems, regardless of imaging methods, are not sufficiently reliable to aid clinical management of these injuries. MATERIALS AND METHODS: Complex fractures in 96 consecutive patients were investigated by generation of rapid sequence prototyping models from computed tomography Digital Imaging and Communications in Medicine (DICOM) imaging data. Four independent senior observers were asked to classify each model using 4 classification systems: Neer, AO, Codman-Hertel, and a prototype classification system by Resch. Interobserver and intraobserver κ coefficient values were calculated for the overall classification system and for selected classification items. RESULTS: The κ coefficient values for the interobserver reliability were 0.33 for Neer, 0.11 for AO, 0.44 for Codman-Hertel, and 0.15 for Resch. Interobserver reliability κ coefficient values were 0.32 for the number of fragments and 0.30 for the anatomic segment involved using the Neer system, 0.30 for the AO type (A, B, C), and 0.53, 0.48, and 0.08 for the Resch impaction/distraction, varus/valgus and flexion/extension subgroups, respectively. Three-part fractures showed low reliability for the Neer and AO systems. DISCUSSION: Currently available evidence suggests fracture classifications in use have poor intra- and inter-observer reliability despite the modality of imaging used thus making treating these injuries difficult as weak as affecting scientific research as well. This study was undertaken to evaluate the reliability of several systems using rapid sequence prototype models. CONCLUSION: Overall interobserver κ values represented slight to moderate agreement. The most reliable interobserver scores were found with the Codman-Hertel classification, followed by elements of Resch's trial system. The AO system had the lowest values. The higher interobserver reliability values for the Codman-Hertel system showed that is the only comprehensive fracture description studied, whereas the novel classification by Resch showed clear definition in respect to varus/valgus and impaction/distraction angulation.

The unstable os acromiale: a cause of pain in the young athlete.

PURPOSE: Os acromiale is a common entity in the middle-age group, in whom it is frequently associated with rotator cuff tears. However, it can be a cause of shoulder pain in the young athletes. We want to increase awareness of this pathology that may occultly affect the young athlete as well as to present the results of a perfusion-preserving arthrodesis. METHODS: Four consecutive young patients (17-21 years old) with a history of at least 6 months of unrecognized shoulder pain were surgically treated for os acromiale. Through a superior approach, stabilization of the neo-joint by means of cannulated screws and autogenic graft augmentation was performed. RESULTS: Union of the os acromiale was achieved in all the patients. They had an excellent functional outcome, reaching all the maximum Simple Shoulder Test (12) and Oxford shoulder Score (48) scores. All the patients were able to return to their previous sports level. CONCLUSION: Awareness of the os acromiale in the young athlete, appropriate clinical examination, and image studies are crucial to confirm diagnosis. Surgical treatment aiming at fusion in situ has shown excellent result.

Osteosynthesis and hemiarthroplasty of fractures of the proximal humerus: outcomes in a consecutive case series.

HYPOTHESIS: This study addresses the outcome after osteosynthesis or hemiarthroplasty, using a cohort of patients that was enrolled in a previous prospective study on humeral head perfusion and was consequently treated using a common conceptual approach. MATERIALS AND METHODS: Between 1998 and 2001, 98 patients with 100 fractures of the proximal humerus were treated surgically by a single surgeon with open reduction and internal fixation (ORIF) (51/100, group A, median age 54 years; range, 21-88) or with hemiarthroplasty (49/100, group B, median age 66 years; range, 38-87). Seventy-six of 98 patients were available for re-evaluation at a mean follow-up of five years (3.3-7.3) using the Constant-Murley score (CMS), the Subjective Shoulder Value (SSV), and conventional radiographs. RESULTS: The median total CMS was 77 (range, 37-98) for group A and 70 (range, 39-84) for group B. The median SSV was 92 (range, 40-100) for group A and 90 (range, 40-100) for group B. Avascular necrosis occured in 6/40 fractures treated with ORIF. CONCLUSION: Osteosynthesis and hemiarthroplasty yield similar functional results and comparable patient satisfaction following the applied decision making process in this selected patient cohort. Osteosynthesis with preservation of the humeral head is worth considering when adequate reduction and stable conditions for revascularization can be obtained. In patients with osteopenic bone and/or comminuted fractures, hemiarthroplasty is a viable alternative. LEVEL OF EVIDENCE: Level 2; Prospective non-randomized comparison study.

External rotation lag sign revisited: accuracy for diagnosis of full thickness supraspinatus tear.

HYPOTHESIS: This study reassessed the sensitivity and the specificity of the external rotator lag sign (ERLS) for diagnosis of supraspinatus tears in a large cohort of patients. MATERIALS AND METHODS: The ERLS was used to assess 401 consecutive patients with 406 painful shoulder conditions. The clinical diagnosis was controlled either arthroscopically or by open surgery. RESULTS: For isolated full-thickness supraspinatus tears, the ERLS had a sensitivity of 56% and a specificity of 98%. When the lesion involved the infraspinatus and the teres minor the sensitivity improved substantially. There was a strong correlation between the extension of the tear and the amount of the lag. The lag increased from 7 degrees for an isolated rupture of the supraspinatus tendon to 26 degrees in case of extension to the teres minor. CONCLUSION: The ERLS is highly specific and acceptably sensitive for diagnosis of full-thickness tears, even in case of an isolated lesion of the supraspinatus tendon. LEVEL OF EVIDENCE: Level 2; Prospective cohort treatment study.

Initial post-fracture humeral head ischemia does not predict development of necrosis.

We evaluated the functional outcome and the occurrence of avascular necrosis in 51 consecutive patients (26 women) with intracapsular fractures of the proximal humerus treated with open reduction and internal fixation between February 1998 and December 2001. Mean age was 44 years (range, 21-60 years). Forty-one heads were initially perfused (group A), and 10 were ischemic (group B). Seven patients were lost to follow-up. Forty-four were evaluated using the Constant-Murley score and the Subjective Shoulder Value; 40 patients consented to a radiographic evaluation. The mean follow-up was 5 years (range, 3.3-7.3 years). In group A, 20 of 30 heads had no sign of structural alterations, 6 had signs of structural alterations of the cancellous bone, and 4 showed collapse of the subchondral bone plate of varying degrees. In group B, 8 of 10 heads were structurally altered, and 2 had collapsed. The median uncorrected Constant-Murley score was 80 (range, 37-98) for patients without structural alterations, 81 (range, 53-93) for patients with structural alterations, and 68 (range, 48-74) for patients with collapsed heads. The median Subjective Shoulder Value was 95 (range, 50-100), 90 (range, 50-100), and 55 (range, 40-80), respectively. Eight of 10 initially ischemic heads did not develop avascular necrosis, indicating that revascularization may indeed occur. The reason for late necrosis in some of the initially perfused heads remains unclear. Collapse was associated with a significantly worse clinical outcome. We conclude that osteosynthesis with preservation of the humeral head is worth considering when adequate reduction and stable conditions for revascularization can be obtained.

Evaluation of intratester and intertester reliability of the Constant-Murley shoulder assessment.

This study evaluated the reliability of the Constant-Murley Score. Two testers assessed 63 patients twice on the same day using the original publication by Constant and Murley. The intratester reliability of the total score was high and the differences between the tests were small; 2 of 14 items were unreliable. The intertester reliability was high, but there were significant median differences of the total score; 12 of 14 items were unreliable. We believe that the differences between the testers were due to the brief explanations of test components in the original publication. The reliability of the Constant-Murley Score could possibly be improved by a better standardization of the assessment procedure.

Reattachment of the tuberosities with cable wires and bone graft in hemiarthroplasties done for proximal humeral fractures with cable wire and bone graft: 58 patients with a 22-month minimum follow-up.

OBJECTIVE: The stability of 2 fixation techniques for the tuberosities in patients with 3- or 4-part proximal humerus fractures treated with hemiarthroplasties was compared. DESIGN: Retrospective review of a nonrandomized sequential series of patients. SETTING: Level I university orthopaedic surgery department. PATIENTS: A consecutive series of 58 patients (average age, 64 years) from 1990 to 1999 with 3- and 4-part fractures of the proximal humerus. INTERVENTION: In group 1, 31 patients were treated with either a Neer or Aequalis shoulder prosthesis using nonabsorbable sutures and no bone graft for the reattachment of the tuberosities. In group 2, 27 patients were treated with either an Aequalis or Epoca shoulder prosthesis and a combination of cable fixation and bone grafting. MAIN OUTCOME MEASUREMENTS: At follow-up (average, 32 months), radiographs were taken to confirm tuberosity fixation or degree of displacement or resorption. Functional outcome was assessed by the Constant-Murley Score. RESULTS: Significantly more dislocated tuberosities were found radiographically in group 1 (10 of 13 in total, P = 0.011), and significantly more tuberosities were resorbed in group 1 (9 of 12 in total, P = 0.012). Significant differences in functional results among healed versus failed tuberosity fixation were observed for activity of daily living (P = 0.05), range of motion (P = 0.002), strength (P = 0.01), the total score (P = 0.008), and the passive rotation amplitude (P = 0.04). CONCLUSION: In hemiarthroplasties for proximal humeral fractures, the reattachment of the tuberosities with cable wire and bone grafting gives consistently better radiographic and functional results than with suture fixation alone.

The difficult proximal humerus fracture: tips and techniques to avoid complications and improve results.

The indications and techniques for surgical management of fractures of the proximal humerus remain controversial, and the results of treatment are often disappointing, with a relatively high complication rate. Anatomic reduction can be difficult, and loss of fixation because of poor bone quality may lead to fracture displacement and malunion. Hemiarthroplasty has a high rate of shoulder stiffness, tuberosity resorption, and glenohumeral instability. There is a wide variety of surgical techniques and implants to treat these fractures, but there is little guidance in the literature on specific indications for their use. Therefore, it is important for orthopaedic surgeons to be familiar with techniques to avoid complications and improve results when treating proximal humerus fractures.

Computerized tomography based 3D modeling of the clavicle.

UNLABELLED: Previous studies have suggested clavicular morphology is highly variable, particularly in the lateral retrocurved section. Current clavicle fracture plating systems require three dimensional intra-operative contouring to achieve adequate fit and necessitate variable soft tissue dissection placing fracture perfusion and muscular attachments at risk. The aim of this study was to search for a surgically relevant superficial shape pattern. This is a retrospective CT-based analysis of 174 non-pathological clavicles in 95 adults (45 females, 50 males). Using the principle of cylindrical parameterisation generated 3-D computer models, we identified an implant preferred pathway (IPP), defined as a continuous linear region where the least possible soft tissue disruption would be necessary for plate fixation. The IPP mean form was within 3.04 mm (SD ± 1.34) on all clavicles. Clavicle length, and not shape, was found to be the biggest variable (correlation between size and form co-ordinates r = 0.99, p < 0.05), accounting for 79% of overall variability. This length variation was mainly located in the medial antecurved section. Superior convexity and recurvatum were the main shape variables, however they only contributed 8% and 5% to the overall variation, respectively. Three IPP lengths were shown to match all clavicles when aligned at the acromial end first. In contrast to previous studies, we have shown that the IPP is fairly consistent with respect to the general shape with the exception of length variation which mainly affected the medial antecurved section. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1216-1223, 2016. CLINICAL RELEVANCE: Future pre-contoured fracture fixation systems should provide variable length plates with a constant lateral section retrocurve and a variable medial antecurve.

Prevention of pressure-induced skin ischemia and impending skin penetration in a displaced clavicle fracture.

This article presents a quick and effective method using adhesive tapes to prevent ischemia or penetration of the skin in clavicle fractures.