RESUMO
The mechanism of the copper mediated C-C bond forming reaction known as Glaser-Hay coupling (alkyne dimerization) has been investigated using electrochemical techniques. Applying an oxidative potential to a copper or copper-coated graphite electrode in the presence of the organic base DABCO results in the dimerization of phenylacetylene in good yield. Further mechanistic investigation has shown that this reaction medium results in the assembly of a dinuclear Cu(i) complex which, although previously reported, has never been shown to have catalytic properties for C-C bond formation. The complex is reminiscent of that proposed in the Bohlmann model for the Glaser-Hay reaction and as such lends weight to this proposed mechanism above the alternative proposed mononuclear catalytic cycle.
RESUMO
A significant problem with implantable sensors is electrode fouling, which has been proposed as the main reason for biosensor failures in vivo. Electrochemical fouling is typical for dopamine (DA) as its oxidation products are very reactive and the resulting polydopamine has a robust adhesion capability to virtually all types of surfaces. The degree of DA fouling of different carbon electrodes with different terminations was determined using cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM) approach curves and imaging. The rate of electron transfer kinetics at the fouled electrode surface was determined from SECM approach curves, allowing a comparison of insulating film thickness for the different terminations. SECM imaging allowed the determination of different morphologies, such as continuous layers or islands, of insulating material. We show that heterogeneous modification of carbon electrodes with carboxyl-amine functionalities offers protection against formation of an insulating polydopamine layer, while retaining the ability to detect DA. The benefits of the heterogeneous termination are proposed to be due to the electrostatic repulsion between amino-functionalities and DA. Furthermore, we show that the conductivity of the surfaces as well as the response toward DA was recovered close to the original performance level after cleaning the surfaces for 10-20 cycles in H2SO4 on all materials but pyrolytic carbon (PyC). The recovery capacity of the PyC electrode was lower, possibly due to stronger adsorption of DA on the surface.
Assuntos
Técnicas Biossensoriais/instrumentação , Carbono/química , Dopamina/análise , Técnicas Eletroquímicas/instrumentação , Adsorção , Aminação , Eletrodos Implantados , Indóis/análise , Oxirredução , Polímeros/análise , Propriedades de SuperfícieRESUMO
Copper oxide modified electrodes were investigated as a function of applied electrode potential using in situ infrared spectroscopy and ex situ Raman and X-ray photoelectron spectroscopy. In deoxygenated KHCO3 electrolyte bicarbonate and carbonate species were found to adsorb to the electrode during reduction and the CuO was reduced to Cu(i) or Cu(0) species. Carbonate was incorporated into the structure and the CuO starting material was not regenerated on cycling to positive potentials. In contrast, in CO2 saturated KHCO3 solution, surface adsorption of bicarbonate and carbonate was not observed and adsorption of a carbonato-species was observed with in situ infrared spectroscopy. This species is believed to be activated, bent CO2. On cycling to negative potentials, larger reduction currents were observed in the presence of CO2; however, less of the charge could be attributed to the reduction of CuO. In the presence of CO2 CuO underwent reduction to Cu2O and potentially Cu, with no incorporation of carbonate. Under these conditions the CuO starting material could be regenerated by cycling to positive potentials.
RESUMO
The ionic liquid trihexyltetradecylphosphonium 1,2,4-triazolide, [P66614][124Triz], has been shown to chemisorb CO2 through equimolar binding of the carbon dioxide with the 1,2,4-triazolide anion. This leads to a possible new, low energy pathway for the electrochemical reduction of carbon dioxide to formate and syngas at low overpotentials, utilizing this reactive ionic liquid media. Herein, an electrochemical investigation of water and carbon dioxide addition to the [P66614][124Triz] on gold and platinum working electrodes is reported. Electrolysis measurements have been performed using CO2 saturated [P66614][124Triz] based solutions at -0.9 V and -1.9 V on gold and platinum electrodes. The effects of the electrode material on the formation of formate and syngas using these solutions are presented and discussed.
RESUMO
Cyclic voltammetry (CV) of polystyrene nanospheres was carried out after immobilisation onto boron-doped diamond electrodes. Although the polystyrene is insulating, a voltammetric response was obtained. This was attributed to the high surface area of the nanospheres, allowing the redox chemistry of the polystyrene surface to be probed despite the non-conducting nature of the bulk. The polystyrene redox response was found to be strongly dependent on prior mechanical agitation. Centrifuged, sonicated and vortexed polystyrene nanospheres all exhibited significantly higher oxidation currents than the non-agitated polystyrene. Mechanical treatment by sonication and centrifugation was found to bring about changes to surface chemistry of the polystyrene spheres, in particular the introduction of oxygen functionalities. For these samples the CV response is attributed to the presence of surface phenol functionalities. On the non-agitated and vortex treated polystyrene surfaces X-ray photoelectron spectroscopy revealed an absence of oxygen functionalities that could explain the redox response. Repetition of the CV experiment in the presence of a solution spin trap suggests that radical species play a role in the observed response. For the vortexed sample the increased oxidation currents were attributed to significant surface roughening and deformation, as revealed by Transmission Electron Microscopy.
RESUMO
We describe an investigation into how Massey University's Pollen Classifynder can accelerate the understanding of pollen and its role in nature. The Classifynder is an imaging microscopy system that can locate, image and classify slide based pollen samples. Given the laboriousness of purely manual image acquisition and identification it is vital to exploit assistive technologies like the Classifynder to enable acquisition and analysis of pollen samples. It is also vital that we understand the strengths and limitations of automated systems so that they can be used (and improved) to compliment the strengths and weaknesses of human analysts to the greatest extent possible. This article reviews some of our experiences with the Classifynder system and our exploration of alternative classifier models to enhance both accuracy and interpretability. Our experiments in the pollen analysis problem domain have been based on samples from the Australian National University's pollen reference collection (2,890 grains, 15 species) and images bundled with the Classifynder system (400 grains, 4 species). These samples have been represented using the Classifynder image feature set. We additionally work through a real world case study where we assess the ability of the system to determine the pollen make-up of samples of New Zealand honey. In addition to the Classifynder's native neural network classifier, we have evaluated linear discriminant, support vector machine, decision tree and random forest classifiers on these data with encouraging results. Our hope is that our findings will help enhance the performance of future releases of the Classifynder and other systems for accelerating the acquisition and analysis of pollen samples.
Assuntos
Algoritmos , Biologia Computacional/métodos , Processamento de Imagem Assistida por Computador/métodos , Pólen/citologia , Mel/análise , Mel/classificação , Magnoliopsida , Modelos Biológicos , Nova Zelândia , Plantas/classificação , Pólen/classificação , Reprodutibilidade dos Testes , Especificidade da EspécieRESUMO
A new low-energy pathway is reported for the electrochemical reduction of CO2 to formate and syngas at low overpotentials, utilizing a reactive ionic liquid as the solvent. The superbasic tetraalkyl phosphonium ionic liquid [P66614][124Triz] is able to chemisorb CO2 through equimolar binding of CO2 with the 1,2,4-triazole anion. This chemisorbed CO2 can be reduced at silver electrodes at overpotentials as low as 0.17 V, forming formate. In contrast, physically absorbed CO2 within the same ionic liquid or in ionic liquids where chemisorption is impossible (such as [P66614][NTf2]) undergoes reduction at significantly increased overpotentials, producing only CO as the product.
RESUMO
Cyanobacterial blooms are one of the most significant threats to global water security and freshwater biodiversity. Interactions among multiple stressors, including habitat degradation, species invasions, increased nutrient runoff, and climate change, are key drivers. However, assessing the role of anthropogenic activity on the onset of cyanobacterial blooms and exploring response variation amongst lakes of varying size and depth is usually limited by lack of historical records. In the present study we applied molecular, paleolimnological (trace metal, Itrax-µ-XRF and hyperspectral scanning, chronology), paleobotanical (pollen) and historical data to reconstruct cyanobacterial abundance and community composition and anthropogenic impacts in two dune lakes over a period of up to 1200 years. Metabarcoding and droplet digital PCR results showed very low levels of picocyanobacteria present in the lakes prior to about CE 1854 (1839-1870 CE) in the smaller shallow Lake Alice and CE 1970 (1963-1875 CE) in the larger deeper Lake Wiritoa. Hereafter bloom-forming cyanobacteria were detected and increased notably in abundance post CE 1984 (1982-1985 CE) in Lake Alice and CE 1997 (1990-2007 CE) in Lake Wiritoa. Currently, the magnitude of blooms is more pronounced in Lake Wiritoa, potentially attributable to hypoxia-induced release of phosphorus from sediment, introducing an additional source of nutrients. Generalized linear modelling was used to investigate the contribution of nutrients (proxy = bacterial functions), temperature, redox conditions (Mn:Fe), and erosion (Ti:Inc) in driving the abundance of cyanobacteria (ddPCR). In Lake Alice nutrients and erosion had a statistically significant effect, while in Lake Wiritoa nutrients and redox conditions were significant.
Assuntos
Cianobactérias , Lagos , Lagos/microbiologia , Cianobactérias/fisiologia , Fósforo/análise , Ecossistema , BiodiversidadeRESUMO
The versatile precursors [Ru(CHâCHC6H4Me-4)Cl(CO)(BTD)(PPh3)2] (BTD = 2,1,3-benzothiadiazole) and [Ru(C(C≡CPh)âCHPh)Cl(CO)(PPh3)2] were treated with isonicotinic acid, 4-cyanobenzoic acid, and 4-(4-pyridyl)benzoic acid under basic conditions to yield [Ru(vinyl)(O2CC5H4N)(CO)(PPh3)2], [Ru(vinyl)(O2CC6H4CN-4)(CO)(PPh3)2], and [Ru(vinyl){O2CC6H4(C5H4N)-4}(CO)(PPh3)2], respectively. The osmium analogue [Os(CHâCHC6H4Me-4)(O2CC5H4N)(CO)(PPh3)2] was also prepared. cis-[RuCl2(dppm)2] was used to prepare the cationic compounds [Ru(O2CC5H4N)(dppm)2](+) and [Ru{O2CC6H4(C5H4N)-4}(dppm)2](+). The treatment of 2 equiv of [Ru(C(C≡CPh)âCHPh)(O2CC5H4N)(CO)(PPh3)2] and [Ru(O2CC5H4N)(dppm)2](+) with AgOTf led to the trimetallic compounds [{Ru(C(C≡CPh)âCHPh)(CO)(PPh3)2(O2CC5H4N)}2Ag](+) and [{Ru(dppm)2(O2CC5H4N)}2Ag](3+). In a similar manner, the reaction of [Ru(O2CC5H4N)(dppm)2](+) with PdCl2 or K2PtCl4 yielded [{Ru(dppm)2(O2CC5H4N)}2MCl2](2+) (M = Pd, Pt). The reaction of [RuHCl(CO)(BTD)(PPh3)2] with HC≡CC6H4F-4 provided [Ru(CHâCHC6H4F-4)Cl(CO)(BTD)(PPh3)2], which was treated with isonicotinic acid and base to yield [Ru(CHâCHC6H4F-4)(O2CC5H4N)(CO)(PPh3)2]. The addition of [Au(C6F5)(tht)] (tht = tetrahydrothiophene) resulted in the formation of [Ru(CHâCHC6H4F-4){O2CC5H4N(AuC6F5)}(CO)(PPh3)2]. Similarly, [Ru(vinyl)(O2CC6H4CN-4)(CO)(PPh3)2] reacted with [Au(C6F5)(tht)] to provide [Ru(vinyl){O2CC6H4(CNAuC6F5)-4}(CO)(PPh3)2]. The reaction of 4-cyanobenzoic acid with [Au(C6F5)(tht)] yielded [Au(C6F5)(NCC6H4CO2H-4)]. This compound was used to prepare [Ru(CHâCHC6H4F-4){O2CC6H4(CNAuC6F5)-4}(CO)(PPh3)2], which was also formed on treatment of [Ru(CHâCHC6H4F-4)(O2CC6H4CN-4)(CO)(PPh3)2] with [Au(C6F5)(tht)]. The known compound [RhCl2(NC5H4CO2)(NC5H4CO2Na)3] and the new complex [RhCl2{NC5H4(C6H4CO2)-4}{NC5H4(C6H4CO2Na)-4}3] were prepared from RhCl3·3H2O and isonicotinic acid or 4-(4-pyridyl)benzoic acid, respectively. The former was treated with [Ru(CHâCHC6H4Me-4)Cl(CO)(BTD)(PPh3)2] to yield [RhCl2{NC5H4CO2(Ru(CHâCHC6H4Me-4)(CO)(PPh3)2}4]Cl. As an alternative route to pentametallic compounds, the Pd-coordinated porphyrin [(Pd-TPP)(p-CO2H)4] was treated with 4 equiv of [Ru(CHâCHR)Cl(CO)(BTD)(PPh3)2] in the presence of a base to yield [(Pd-TPP){p-CO2Ru(CHâCHR)(CO)(PPh3)2}4] (R = C6H4Me-4, CPh2OH). Where R = CPh2OH, treatment with HBF4 led to the formation of [(Pd-TPP){p-CO2Ru(âCHCHâCPh2)(CO)(PPh3)2}4](BF4)4. [(Pd-TPP){p-CO2Ru(dppm)2}4](PF6)4 was prepared from [(Pd-TPP)(p-CO2H)4] and cis-[RuCl2(dppm)2]. The reaction of AgNO3 with sodium borohydride in the presence of [Ru(O2CC5H4N)(dppm)2](+) or [RuR{O2CC6H4(C5H4N)-4}(dppm)2](+) provided silver nanoparticles Ag@[NC5H4CO2Ru(dppm)2](+) and Ag@[NC5H4{C6H4CO2Ru(dppm)2}-4](+).
RESUMO
Carbon surfaces (glassy carbon, graphite, and boron-doped diamond) were functionalized with layers composed of linked pyridinium and pyridine moieties using simple electrochemical reduction of trifluoroacetylpyridinium. The pyridinium species was generated in situ in solution by the reaction of trifluoroacetic anhydride and pyridine precursors and underwent electrochemical reduction at -1.97 V vs Fc/Fc+, as determined by cyclic voltammetry. The pyridine/pyridinium films were electrodeposited at room temperature, on a timescale of minutes, and were characterized using X-ray photoelectron spectroscopy. The as-prepared films have a net positive charge in aqueous solution at pH 9 and below due to the pyridinium content, confirmed by the electrochemical response of differently charged redox molecules at the functionalized surfaces. The positive charge can be enhanced further through protonation of the neutral pyridine component by controlling the solution pH. Moreover, the nitrogen-acetyl bond can be cleaved through base treatment to purposefully increase the neutral pyridine proportion of the film. This results in a surface that can be "switched" from functionally near neutral to a positive charge by treatment in basic and acidic solutions, respectively, through manipulation of the protonation state of the pyridine. The functionalization process demonstrated here is readily achievable at a fast timescale at room temperature and hence can allow for rapid screening of surface properties. Such functionalized surfaces present a means to test in isolation the specific catalytic performance of pyridinic groups toward key processes such as oxygen and CO2 reduction.
RESUMO
This article discusses some of our recent work on the origins of redox activity of undoped nanodiamond (ND) powders, as well as reviewing some properties and applications of this material. The electrochemical activity is attributed to unsaturated bonding at the ND particle surface; hence the most recent understanding of the surface chemistry of these materials is discussed. The implications of the observed redox activity, especially for use in biological applications, are highlighted, along with future avenues of research.
RESUMO
We propose that redox reactions on the surface of interstellar dust grains contribute to the synthesis of some polyatomic species that have been identified by spectroscopic signatures. Most of the dust is found in clouds along with a rich abundance of molecular and atomic species, creating a thermodynamically distinct region in the interstellar medium (ISM) where chemistry can be supported. Using knowledge of redox process at the solid/liquid interface, a hypothesis is presented for processing mechanisms involving electron transfer between surface adsorbed species and the solid dust grains found in the ISM. The hypothesis is based on the interaction of dust grains with electromagnetic radiation and plumes of ionised gas, which electrostatically charge dust grains leading to an adjustment of the Fermi energy of electrons on the surface of individual grains. This process is equivalent to applying an external electrochemical potential to an electrode, to drive redox chemistry on an electrode surface in electrolysis or dynamic electrochemistry. Here the individual grains act as 'single electrode' electrochemical reactors in the gas phase. In this paper we highlight a gap in understanding of redox reactions at the solid/gas interface, which is potentially a very fruitful and interesting area of research.
RESUMO
In palynology, the visual classification of pollen grains from different species is a hard task which is usually tackled by human operators using microscopes. Many industries, including medical and pharmaceutical, rely on the accuracy of this manual classification process, which is reported to be around 67%. In this paper, we propose a new method to automatically classify pollen grains using deep learning techniques that improve the correct classification rates in images not previously seen by the models. Our proposal manages to properly classify up to 98% of the examples from a dataset with 46 different classes of pollen grains, produced by the Classifynder classification system. This is an unprecedented result which surpasses all previous attempts both in accuracy and number and difficulty of taxa under consideration, which include types previously considered as indistinguishable.
Assuntos
Biologia Computacional/métodos , Aprendizado Profundo , Pólen/classificação , Automação , Bases de Dados Factuais , Processamento de Imagem Assistida por ComputadorRESUMO
The hydrogen evolution reaction (HER) is a critical process in the electrolysis of water. Recently, much effort has been dedicated to developing low-cost, highly efficient, and stable electrocatalysts. Transition metal phosphides are investigated intensively due to their high electronic conductivity and optimized absorption energy of intermediates in acid electrolytes. However, the low stability of metal phosphide materials in air and during electrocatalytic processes causes a decay of performance and hinders the discovery of specific active sites. The HER in alkaline media is more intricate, which requires further delicate design due to the Volmer steps. In this work, phosphorus-modified monoclinic ß-CoMoO4 is developed as a low-cost, efficient, and stable HER electrocatalyst for the electrolysis of water in alkaline media. The optimized catalyst shows a small overpotential of 94 mV to reach a current density of 10 mA cm-2 for the HER with high stability in KOH electrolyte, and an overpotential of 197 mV to reach a current density of 100 mA cm-2. Combined computational and in situ spectroscopic techniques show P is present as a surface phosphate ion; that electron holes localize on the surface ions and both (P-O1-) and Co3+-OH- are prospective surface active sites for the HER.
RESUMO
The electrochemical response of an electrode-immobilized layer of undoped, insulating diamond nanoparticles is reported, which we attribute to the oxidation and reduction of surface states. The potentials of these surface states are pH-dependent; moreover they are able to interact with solution redox species. The voltammetric response of redox couples Fe(CN)(6)(3-/4-) and IrCl(6)(3-/2-) are compared at bare boron-doped diamond electrodes and electrodes modified with a layer of nanodiamond (ND). In all cases the presence of ND modifies the CV response at slow scan rates if low concentrations of redox couple are used. Enhancements of oxidation currents are noted at potentials at which the ND surface states can also undergo oxidation, and enhancements of reduction currents are likewise observed where ND is also reducible. We attribute these observations to electron transfer occurring between the species generated at the underlying electrode during CV and the ND immobilized in the interfacial region, leading to regeneration of the starting species and hence enhancement in currents due to a feedback mechanism. The magnitude of current enhancement thus depends on the standard potential of the redox couple relative to those of the ND surface states.
RESUMO
The fabrication of ultramicroelectrodes (UMEs) for analytical electrochemical applications has been explored, using boron-doped diamond as the active electrode material in an insulating coating formed by deposition of electrophoretic paint. Because of the rough nature of the diamond film, the property of such coatings that is normally exploited in the fabrication of UMEs, namely the tendency to retract automatically from sharp protrusions, cannot be used in the present instance. Instead focused ion beam (FIB) sputtering was employed to controllably produce UMEs with well-defined geometry, critical dimension of a few micrometers, and very thin insulating coatings. If the FIB machining is carried out at normal incidence to the diamond electrode surface, significant ion beam damage reduces the yield of successful electrodes. However, if a parallel machining geometry is employed, high yields of ultramicroelectrodes with a flat disk geometry can be obtained very reliably. The electrochemical properties of diamond UMEs are characterized. They show much lower background currents than the equivalent Pt or carbon fiber electrodes but more varied electrochemical response than macroscopic diamond electrodes.
RESUMO
Changes in pH at electrode surfaces can occur when redox reactions involving the production or consumption of protons take place. Many redox reactions of biological or analytical importance are proton-coupled, resulting in localized interfacial pH changes as the reaction proceeds. Other important electrochemical reactions, such as hydrogen and oxygen evolution reactions, can likewise result in pH changes near the electrode. However, it is very difficult to measure pH changes located within around 100 µm of the electrode surface. This paper describes the use of in situ attenuated total reflectance (ATR) infrared (IR) spectroscopy to determine the pH of different solutions directly at the electrode interface, while a potential is applied. Changes in the distinctive IR bands of solution phosphate species are used as an indicator of pH change, given that the protonation state of the phosphate ions is pH-dependent. We found that the pH at the surface of an electrode modified with carbon nanotubes can increase from 4.5 to 11 during the hydrogen evolution reaction, even in buffered solutions. The local pH change accompanying the hydroquinone-quinone redox reaction is also determined.