RESUMO
We demonstrate the possibility to directly detect microgram amounts of the isotope 7Li using a quasi-monochromatic high-energy photon beam. The isotope selective detection is based on a witness scatterer absorbing and re-emitting photons via nuclear resonance fluorescence. This enables the detection of isotopes with microgram accuracy at long distances from the actual sample. Further, we demonstrate that the technique can deliver quantitative information without specific knowledge of the photon flux and no spectral capabilities or knowledge of the resonance fluorescence cross section. Detection of low-atomic-weight isotopes screened by heavy shielding is also shown. The techniques described are applicable to all next-generation, ultrahigh brilliance, laser-Compton light sources currently under construction.
RESUMO
The theoretical design of effective metal electrocatalysts for energy conversion and storage devices relies greatly on supposed unilateral effects of catalysts structure on electrocatalyzed reactions. Here, by using high-energy X-ray diffraction from the new Extremely Brilliant Source of the European Synchrotron Radiation Facility (ESRF-EBS) on device-relevant Pd and Pt nanocatalysts during cyclic voltammetry experiments in liquid electrolytes, we reveal the near ubiquitous feedback from various electrochemical processes on nanocatalyst strain. Beyond challenging and extending the current understanding of practical nanocatalysts behavior in electrochemical environment, the reported electrochemical strain provides experimental access to nanocatalysts absorption and adsorption trends (i.e., reactivity and stability descriptors) operando. The ease and power in monitoring such key catalyst properties at new and future beamlines is foreseen to provide a discovery platform toward the study of nanocatalysts encompassing a large variety of applications, from model environments to the device level.
RESUMO
The molecular-scale structure and dynamics of confined liquids has increasingly gained relevance for applications in nanotechnology. Thus, a detailed knowledge of the structure of confined liquids on molecular length scales is of great interest for fundamental and applied sciences. To study confined structures under dynamic conditions, we constructed an in situ X-ray surface forces apparatus (X-SFA). This novel device can create a precisely controlled slit-pore confinement down to dimensions on the 10 nm scale by using a cylinder-on-flat geometry for the first time. Complementary structural information can be obtained by simultaneous force measurements and X-ray scattering experiments. The in-plane structure of liquids parallel to the slit pore and density profiles perpendicular to the confining interfaces are studied by X-ray scattering and reflectivity. The normal load between the opposing interfaces can be modulated to study the structural dynamics of confined liquids. The confinement gap distance is tracked simultaneously with nanometer precision by analyzing optical interference fringes of equal chromatic order. Relaxation processes can be studied by driving the system out of equilibrium by shear stress or compression/decompression cycles of the slit pore. The capability of the new device is demonstrated on the liquid crystal 4'-octyl-4-cyano-biphenyl (8CB) in its smectic A (SmA) mesophase. Its molecular-scale structure and orientation confined in 100 nm to 1.7 µm slit pores was studied under static and dynamic nonequilibrium conditions.
RESUMO
The interfacial premelting in ice/clay nano composites was studied by high energy X-ray diffraction. Below the melting point of bulk water, the formation of liquid water was observed for the ice/vermiculite and ice/kaolin systems. The liquid fraction is gradually increasing with temperature. For both minerals, similar effective premelting layer thicknesses of 2-3 nm are reached 3 K below the bulk melting point. For the quantitative description of the molten water fraction in wet clay minerals we developed a continuum model for short range interactions and arbitrary pore size distributions. This model quantitatively describes the experimental data over the entire temperature range. Model parameters were obtained by fitting using a maximum entropy (MaxEnt) approach. Pronounced differences in the deviation from Antonow's rule relating interfacial free energy between ice, water, and clay are observed for the charged vermiculite and uncharged kaolin minerals. The resultant parameters are discussed in terms of their ice nucleation efficiency. Using well defined and characterized ice/clay nano composite samples, this work bridges the gap between studies on single crystalline ice/solid model interfaces and naturally occurring soils and permafrost.
RESUMO
Wide angle x-ray scattering of supercooled water down to 234.8 K was studied using high energy x rays at the European Synchrotron Radiation Facility. The oxygen-oxygen pair distribution function (PDF) was calculated from the scattering pattern out to the 5th peak at an intermolecular distance, r ≈ 11 Å. We observe that the 4th peak and the 5th peak in the PDF increase in height upon supercooling. We also observe that the 4th peak position (r4) shifts to shorter distances upon supercooling consistent with previous studies, but we see a more rapid change at the lowest temperature. The running oxygen-oxygen coordination number is calculated for 5 different temperatures, and an isosbestic point at riso = 3.31 ± 0.05 Å was found corresponding to a coordination number of 4.39 ± 0.15. The comparison of the PDF of the coldest water with that of amorphous ice shows distinct differences. We propose that there are 5-member pentamer rings in low density liquid-like structures giving rise to the sharp correlations at r ≈ 9 Å and r ≈ 11 Å.
RESUMO
We have investigated the formation of lamellar crystals of poly(vinylidene fluoride) (PVDF) in the presence of oriented clay particles with different aspect ratios (ARs) and surface properties. Hot-melt screw extrusion of PVDF with 5 wt % of montmorillonite (AR ≈ 12) or fluoromica (AR ≈ 27) resulted in formation of phase-separated blends. Replacing the clays with their organoclay derivatives, organomontmorillonite or organofluoromica, resulted in the corresponding intercalated nanocomposites. The organoclays induced formation of polar ß- and γ-polymorphs of PVDF in contrast to the α-polymorph, which dominates in the pure PVDF and the PVDF/clay blends. Solid-state nuclear magnetic resonance revealed that the content of the α-phase in the nanocomposites was never higher than 7% of the total crystalline phase, whereas the ß/γ mass ratio was close to 1:2, irrespective of the AR or crystallization conditions. X-ray diffraction showed that the oriented particles with a larger AR caused orientation of the polar lamellar crystals of PVDF. In the presence of the organofluoromica, PVDF formed a chevron-like lamellar nanostructure, where the polymer chains are extended along the extrusion direction, whereas the lamellar crystals were slanted from normal to the extrusion direction. Time-resolved X-ray diffraction experiments allowed the identification of the formation mechanism of the chevron-like nanostructure.
RESUMO
In this work, the structure of solid-supported lipid multilayers exposed to increased hydrostatic pressure was studied in situ by X-ray reflectometry at the solid-liquid interface between silicon and an aqueous buffer solution. The layers' vertical structure was analyzed up to a maximum pressure of 4500 bar. The multilayers showed phase transitions from the fluid into different gel phases. With increasing pressure, a gradual filling of the sublayers between the hydrophilic head groups with water was observed. This process was inverted when the pressure was decreased, yielding finally smaller water layers than those in the initial state. As is commonly known, water has an abrasive effect on lipid multilayers by the formation of vesicles. We show that increasing pressure can reverse this process so that a controlled switching between multi- and bilayers is possible.
Assuntos
Bicamadas Lipídicas/química , Dimiristoilfosfatidilcolina/química , Pressão Hidrostática , Transição de Fase , Silício , Água/químicaRESUMO
Focusing optics operating in the soft gamma-ray photon energy range can advance a range of scientific and technological applications that benefit from the large improvements in sensitivity and resolution that true imaging provides. An enabling technology to this end is multilayer coatings. We show that very short period multilayer coatings deposited on super-polished substrates operate efficiently above 0.6 MeV. These experiments demonstrate that Bragg scattering theory established for multilayer applications as low as 1 eV continues to work well into the gamma-ray band.
RESUMO
HYPOTHESIS: Room Temperature Ionic Liquids (RTILs) bulk's molecular layering dominates their structure also at the RTIL/sapphire interface, increasing the layer spacing with the cationic alkyl chain length n. However, the negatively-charged sapphire surface compresses the layers, increases the layering range, and affects the intra-layer structure in yet unknown ways. EXPERIMENTS: X-ray reflectivity (XR) off the RTIL/sapphire interface, for a broad homologous RTIL series 1-alkyl-3-methylimidazolium bis(trifluoromethansulfonyl)imide, hitherto unavailable for any RTIL. FINDINGS: RTIL layers against the sapphire, exhibit two spacings: da and db. da is n-varying, follows the behavior of the bulk spacing but exhibits a downshift, thus showing significant layer compression, and over twofold polar slab thinning. The latter suggests exclusion of anions from the interfacial region due to the negative sapphire charging by x-ray-released electrons. The layering range is larger than the bulk's. db is short and near n-independent, suggesting polar moieties' layering, the coexistence mode of which with the da-spaced layering is unclear. Comparing the present layering with the bulk's and the RTIL/air interface's provides insight into the Coulomb and dispersion interaction balance dominating the RTIL's structure and the impact thereon of the presence of a charged solid interface.
RESUMO
Traditional multilayer reflective optics that have been used in the past for imaging at x-ray photon energies as high as 200 keV are governed by classical wave phenomena. However, their behavior at higher energies is unknown, because of the increasing effect of incoherent scattering and the disagreement between experimental and theoretical optical properties of materials in the hard x-ray and gamma-ray regimes. Here, we demonstrate that multilayer reflective optics can operate efficiently and according to classical wave physics up to photon energies of at least 384 keV. We also use particle transport simulations to quantitatively determine that incoherent scattering takes place in the mirrors but it does not affect the performance at the Bragg angles of operation. Our results open up new possibilities of reflective optical designs in a spectral range where only diffractive optics (crystals and lenses) and crystal monochromators have been available until now.
RESUMO
Rare-earth co-doping in inorganic materials has a long-held tradition of facilitating highly desirable optoelectronic properties for their application to the laser industry. This study concentrates specifically on rare-earth phosphate glasses, (R2O3)x(R'2O3)y(P2O5)(1-(x+y)), where (R, R') denotes (Ce, Er) or (La, Nd) co-doping and the total rare-earth composition corresponds to a range between metaphosphate, RP3O9, and ultraphosphate, RP5O14. Thereupon, the effects of rare-earth co-doping on the local structure are assessed at the atomic level. Pair-distribution function analysis of high-energy X-ray diffraction data (Q(max) = 28 Å(-1)) is employed to make this assessment. Results reveal a stark structural invariance to rare-earth co-doping which bears testament to the open-framework and rigid nature of these glasses. A range of desirable attributes of these glasses unfold from this finding; in particular, a structural simplicity that will enable facile molecular engineering of rare-earth phosphate glasses with 'dial-up' lasing properties. When considered together with other factors, this finding also demonstrates additional prospects for these co-doped rare-earth phosphate glasses in nuclear waste storage applications. This study also reveals, for the first time, the ability to distinguish between P-O and P[double bond, length as m-dash]O bonding in these rare-earth phosphate glasses from X-ray diffraction data in a fully quantitative manner. Complementary analysis of high-energy X-ray diffraction data on single rare-earth phosphate glasses of similar rare-earth composition to the co-doped materials is also presented in this context. In a technical sense, all high-energy X-ray diffraction data on these glasses are compared with analogous low-energy diffraction data; their salient differences reveal distinct advantages of high-energy X-ray diffraction data for the study of amorphous materials.
RESUMO
Looking in: The penetrating power of high-energy X-rays provides a means to monitor inâ situ and in real time the course of ball-milling reactions of organic pharmaceutical solids by detecting crystalline phases and assessing the evolution of their particle sizes. Upon switching from neat grinding to liquid-assisted grinding, cocrystal formation is enabled or tremendously accelerated, while the reaction mechanism alters its course.
RESUMO
A cell for the investigation of interfaces under pressure is presented. Given the pressure and temperature specifications of the cell, P ≤ 100â bar and 253â K ≤ T ≤ 323â K, respectively, high-energy X-rays are required to penetrate the thick Al(2)O(3) windows. The CH(4)(gas)/H(2)O(liquid) interface has been chosen to test the performance of the new device. The measured dynamic range of the high-energy X-ray reflectivity data exceeds 10(-8), thereby demonstrating the validity of the entire experimental set-up.
RESUMO
The present status and accuracy of determining the electron momentum density from experimental Compton profiles is reviewed. The new spectrometers operating at third-generation synchrotron radiation sources have made possible measurements with 0.1% statistical accuracy at the Compton peak. A comparable accuracy of the Compton profiles is achieved only after careful corrections for departures from the impulse approximation, effects of multiple scattering, and variations in the analyser response function. Detailed descriptions are given of the correction procedures applied to the data collected by the Johann-type scanning spectrometer that is one of the Compton spectrometers in use at the ESRF. Special attention is paid to the calculation and correction of the glitches that are caused by extra reflections of the analyser crystal. The Fourier transform of the Compton profile, the reciprocal form factor, is calculated, and its use in data treatment and presentation is discussed.
RESUMO
The structure of two model room temperature ionic liquids, [BMIM](+)[PF(6)](-) and [BMIM](+)[BF(4)](-), near the solid/liquid interface with charged Al(2)O(3)(0001) (sapphire) was determined with subnanometer resolution by high energy (72.5 keV) x-ray reflectivity. [BMIM](+)[PF(6)](-) exhibits alternately charged, exponentially decaying, near-surface layering. By contrast, the smaller-anion compound, [BMIM](+)[BF(4)](-), shows only a single layer of enhanced electron density at the interface. The different layering behaviors, and their characteristic length scales, correspond well to the different bulk diffraction patterns, also measured in this study. Complementary measurements of the surface and interface energies showed no significant different between the two RTILs. The combined bulk-interface results support the conclusion that the interfacial ordering is dominated by the same electrostatic ion-ion interactions dominating the bulk correlations, with hydrogen bonding and dispersion interactions playing only a minor role.
RESUMO
We present a high energy x-ray reflectivity study of the density profiles of water and ice at hydrophobic and hydrophilic substrates. At the hydrophobic water/octadecyl-trichlorosilane (water-OTS) interface, we find clear evidence for a thin density depletion layer with an integrated density deficit corresponding to approximately 40% of a monolayer of water molecules. We discuss the experimental results in terms of a simple model of hydrophobic/hydrophilic solid-liquid interfaces. Our results also exclude the presence of nanobubbles. A detailed study of possible radiation damage induced by the intense x-ray beam at the dry OTS surface and at the ice-OTS, as well as at water-OTS interfaces, discloses that noticeable damage is only induced at the water-OTS interface, and thus points to the dominant role of highly mobile radicals formed in bulk water close to the interface.
RESUMO
Processes at material interfaces to liquids or to high-pressure gases often involve structural changes that are heterogeneous on the micrometer scale. We present a novel in situ X-ray scattering technique that uses high-energy photons and a transmission geometry for atomic-scale studies under these conditions. Transmission surface diffraction gives access to a large fraction of reciprocal space in a single acquisition, allowing direct imaging of the in-plane atomic arrangement at the interface. Experiments with focused X-ray beams enable mapping of these structural properties with micrometer spatial resolution. The potential of this new technique is illustrated by in situ studies of electrochemical surface phase transitions and deposition processes.
RESUMO
An experimental technique for in situ and real-time monitoring of mechanochemical reactions in a shaker ball mill was recently described, which utilises highly penetrating X-ray radiation available at the ID15B beamline of the European Synchrotron Radiation Facility. Herein, we describe the first attempts to perform such reaction monitoring in a quantitative fashion, by introducing an internal X-ray diffraction standard. The use of silicon as an internal standard resolved the issue with variations of the amount of the sample in the X-ray beam due to the non-uniform distribution of the sample in the reaction jar and allowed, via Rietveld analysis, the first quantitative estimate of the amorphous phase content in a mechanochemical reaction as it is being milled. We also highlight problems associated with the non-ideal mixing of the reaction mixture.
Assuntos
Imidazóis/química , Óxido de Zinco/química , Silício/química , Difração de Raios XRESUMO
We report a Compton scattering study on the molecular-level structural changes of aqueous poly(N-isopropylacrylamide) (PNIPAM) across the conformational phase transition. PNIPAM is a thermoresponsive polymer that changes its conformation in water from the hydrophilic coil state to the collapsed hydrophobic globule state at 32 °C. Combined with density functional theory calculations, the Compton scattering experiments detect two type of changes in the phase transition. The amount of hydrogen bonds is found to reduce, and an elongation of the internal covalent bond lengths is observed. The elongation of the bonds indicates that not only the hydrogen bonding changes but there are other processes, most likely related to hydrophobic interaction, that should be taken into account in the phase transition.
RESUMO
Chemical and structural transformations have long been carried out by milling. Such mechanochemical steps are now ubiquitous in a number of industries (such as the pharmaceutical, chemical and metallurgical industries), and are emerging as excellent environmentally friendly alternatives to solution-based syntheses. However, mechanochemical transformations are typically difficult to monitor in real time, which leaves a large gap in the mechanistic understanding required for their development. We now report the real-time study of mechanochemical transformations in a ball mill by means of in situ diffraction of high-energy synchrotron X-rays. Focusing on the mechanosynthesis of metal-organic frameworks, we have directly monitored reaction profiles, the formation of intermediates, and interconversions of framework topologies. Our results reveal that mechanochemistry is highly dynamic, with reaction rates comparable to or greater than those in solution. The technique also enabled us to probe directly how catalytic additives recently introduced in the mechanosynthesis of metal-organic frameworks, such as organic liquids or ionic species, change the reactivity pathways and kinetics.