RAFT Polymerisation by the Radical Decarboxylation of Carboxylic Acids.

The controlled grafting of polymers from small- and macro-molecular substrates is an essential process for many advanced polymer applications. This usually requires the pre-functionalisation of substrates with an appropriate functional group, such as a RAFT agent or ATRP initiator, which requires additional synthetic steps. In this paper, we describe the direct grafting of RAFT polymers from carboxylate containing small molecules and polymers via photochemical radical decarboxylation. This method utilises the innate functional groups present in the substrates, and achieves efficient polymer initiation in a single step with excellent control of molecular weight and dispersity.

Thermoresponsive Poly(N-isopropylacrylamide) Grafted from Cellulose Nanofibers via Silver-Promoted Decarboxylative Radical Polymerization.

A family of thermoresponsive poly(N-isopropylacrylamide) [PNIPAM]-grafted cellulose nanofibers (CNFs) was synthesized via a novel silver-promoted decarboxylative polymerization approach. This method relies on the oxidative decarboxylation of carboxylic acid groups to initiate free radicals on the surface of CNFs. The polymerization reaction employs relatively mild reaction conditions and can be performed in a one-step, one-pot fashion. This rapid reaction forms a C─C bond between CNF and PNIPAM, along with the formation of free polymer in solution. The degree of functionalization (DF) and the amount of PNIPAM grafted can be controlled by the Ag concentration in the reaction. Similar to native bulk PNIPAM, PNIPAM-grafted CNFs (PNIPAM-g-CNFs) show remarkable thermoresponsive properties, albeit exhibiting a slight hysteresis between the heating and cooling stages. Grafting PNIPAM from CNFs changes its cloud point from about 32 to 36 °C, influenced by the hydrophilic nature of CNFs. Unlike physical blending, covalently tethering PNIPAM transforms the originally inert CNFs into thermosensitive biomaterials. The Ag concentration used does not significantly change the cloud point of PNIPAM-g-CNFs, while the cloud point slightly decreases with fiber concentration. Rheological studies demonstrated the sol-gel transition of PNIPAM-g-CNFs and revealed that the storage modulus (G') above cloud point increases with the amount of PNIPAM grafted. The novel chemistry developed paves the way for the polymerization of any vinyl monomer from the surface of CNFs and carbohydrates. This study validates a novel approach to graft PNIPAM from CNFs for the synthesis of new thermoresponsive and transparent hydrogels for a wide range of applications.

Redox Isomerization/(3+2) Allenoate Annulation by Auto-Tandem Phosphine Catalysis.

A phosphine-catalyzed approach to pyrrolines has been developed that involves two mechanistically unlinked catalytic processes. The first involves the redox isomerization of amino crotonates to provide access to aliphatic tosyl imines, which then engage in a (3+2) annulation with various allenoates. The reaction shows generality, with 24 examples established, along with a low yielding and moderately enantioselective variant. Mechanistic studies indicate that the viability of the process is linked to the selection of catalysts with similar propensity to add to the two coupling partners.

Pristine Graphene as a Racemization Catalyst for Axially Chiral BINOL.

Despite versatile applications of functionalized graphene in catalysis, applications of pure, unfunctionalized graphene in catalysis are in their infancy. This work uses both computational and experimental approaches to show that single-layer graphene can efficiently catalyze the racemization of axially chiral BINOL in solution. Using double-hybrid density functional theory (DHDFT) we calculate the uncatalyzed and catalyzed Gibbs free reaction barrier heights in a number of representative solvents of varying polarity: benzene, diphenyl ether, dimethylformamide (DMF), and water. These calculations show that (i) graphene can achieve significant catalytic efficiencies (▵▵G≠ cat ) varying between 47.2 (in diphenyl ether) and 60.7 (in DMF) kJ mol-1 . An energy decomposition analysis reveals that this catalytic activity is driven by electrostatic and dispersion interactions. Based on these computational results, we explore the graphene-catalyzed racemization of axially chiral BINOL experimentally and show that single-layer graphene can efficiently catalyze this process. Whilst the uncatalyzed racemization requires high temperatures of over 200 °C, a pristine single-layer graphene catalyst makes it accessible at 60 °C.

α-Amino Aldehydes as Readily Available Chiral Aldehydes for Rh-Catalyzed Alkyne Hydroacylation.

Readily available α-amino aldehydes, incorporating a methylthiomethyl (MTM) protecting group on nitrogen, are shown to be efficient substrates in Rh-catalyzed alkyne hydroacylation reactions. The reactions are performed under mild conditions, employing a small-bite-angle bis-phosphine ligand, allowing for good functional group tolerance with high stereospecificity. Amino aldehydes derived from glycine, alanine, valine, leucine, phenylalanine, isoleucine, serine, tryptophan, methionine, and cysteine were successfully employed, as was an enantiomerically enriched α-OMTM-aldehyde derived from phenyllactic acid. The synthetic utility of the α-amino enone products is demonstrated in a short enantioselective synthesis of the natural product sphingosine.

A general method for interconversion of boronic acid protecting groups: trifluoroborates as common intermediates.

We have developed a general protocol for the interconversion of diverse protected boronic acids, via intermediate organotrifluoroborates. N-Methyliminodiacetyl boronates, which have been hitherto resistant to direct conversion to trifluoroborates, have been shown to undergo fluorolysis at elevated temperatures. Subsequent solvolysis of organotrifluoroborates in the presence of trimethylsilyl chloride and a wide range of bis-nucleophiles enables the generation of a variety of protected boronic acids.

Medium-Ring Effects on the Endo/Exo Selectivity of the Organocatalytic Intramolecular Diels-Alder Reaction.

The intramolecular Diels-Alder reaction has been used as a powerful method to access the tricyclic core of the eunicellin natural products from a number of 9-membered-ring precursors. The endo/exo selectivity of this reaction can be controlled through a remarkable organocatalytic approach, employing MacMillan's imidazolidinone catalysts, although the mechanistic origin of this selectivity remains unclear. We present a combined experimental and density functional theory investigation, providing insight into the effects of medium-ring constraints on the organocatalyzed intramolecular Diels-Alder reaction to form the isobenzofuran core of the eunicellins.

Traceless chelation-controlled rhodium-catalyzed intermolecular alkene and alkyne hydroacylation.

A new functional-group tolerant, rhodium-catalyzed, sulfide-reduction process is combined with rhodium-catalyzed chelation-controlled hydroacylation reactions to give a traceless hydroacylation protocol. Aryl- and alkenyl aldehydes can be combined with both alkenes, alkynes and allenes to give traceless products in high yields. A preliminary mechanistic proposal is also presented.

Carbon fibre surface modification facilitated by silver-catalysed radical decarboxylation.

A silver catalysed radical decarboxylation process was used to graft a copolymer (4 : 1; methylacrylate/acrylic acid) onto short carbon fibres. Surface grafting was confirmed by XPS, SEM and TGA, suggesting that the polymer accounted for 10% of the modified materials mass. Incorporation of these surface enhanced carbon fibres into an epoxy resin gave composites demonstrating an increase in ductility and a clear change in failure mode from adhesive, at the fibre-matrix interface, to cohesive, within the matrix polymer itself.

Effect of temperature on the conformation and functionality of poly(N-isopropylacrylamide) (PNIPAM)-grafted nanocellulose hydrogels.

HYPOTHESIS: Poly(N-isopropylacrylamide) [PNIPAM]-grafted cellulose nanofibers (CNFs) are new thermo-responsive hydrogels which can be used for a wide range of applications. Currently, there is no clear understanding of the precise mechanism by which CNFs and PNIPAM interact together. Here, we hypothesize that the physical crosslinking of grafted PNIPAM on CNF inhibits the free movement of individual CNF, which increases the gel strength while sustaining its thermo-responsive properties. EXPERIMENTS: The thermo-responsive behaviour of PNIPAM-grafted CNFs (PNIPAM-g-CNFs), synthesized via silver-catalyzed decarboxylative radical polymerization, and PNIPAM-blended CNFs (PNIPAM-b-CNFs) was studied. Small angle neutron scattering (SANS) combined with Ultra-SANS (USANS) revealed the nano to microscale conformation changes of these polymer hybrids as a function of temperature. The effect of temperature on the optical and viscoelastic properties of hydrogels was also investigated. FINDINGS: Grafting PNIPAM from CNFs shifted the lower critical solution temperature (LCST) from 32 °C to 36 °C. Below LCST, the PNIPAM chains in PNIPAM-g-CNF sustain an open conformation and poor interaction with CNF, and exhibit water-like behaviour. At and above LCST, the PNIPAM chains change conformation to entangle and aggregate nearby CNFs. Large voids are formed in solution between the aggregated PNIPAM-CNF walls. In comparison, PNIPAM-b-CNF sustains liquid-like behaviour below LCST. At and above LCST, the blended PNIPAM phase separates from CNF to form large aggregates which do not affect CNF network and thus PNIPAM-b-CNF demonstrates low viscosity. Understanding of temperature-dependent conformation of PNIPAM-g-CNFs engineer thermo-responsive hydrogels for biomedical and functional applications.

Intermolecular hydroacylation: high activity rhodium catalysts containing small-bite-angle diphosphine ligands.

Readily prepared and bench-stable rhodium complexes containing methylene bridged diphosphine ligands, viz. [Rh(C(6)H(5)F)(R(2)PCH(2)PR'(2))][BAr(F)(4)] (R, R' = (t)Bu or Cy; Ar(F) = C(6)H(3)-3,5-(CF(3))(2)), are shown to be practical and very efficient precatalysts for the intermolecular hydroacylation of a wide variety of unactivated alkenes and alkynes with ß-S-substituted aldehydes. Intermediate acyl hydride complexes [Rh((t)Bu(2)PCH(2)P(t)Bu(2))H{κ(2)(S,C)-SMe(C(6)H(4)CO)}(L)](+) (L = acetone, MeCN, [NCCH(2)BF(3)](-)) and the decarbonylation product [Rh((t)Bu(2)PCH(2)P(t)Bu(2))(CO)(SMePh)](+) have been characterized in solution and by X-ray crystallography from stoichiometric reactions employing 2-(methylthio)benzaldehdye. Analogous complexes with the phosphine 2-(diphenylphosphino)benzaldehyde are also reported. Studies indicate that through judicious choice of solvent and catalyst/substrate concentration, both decarbonylation and productive hydroacylation can be tuned to such an extent that very low catalyst loadings (0.1 mol %) and turnover frequencies of greater than 300 h(-1) can be achieved. The mechanism of catalysis has been further probed by KIE and deuterium labeling experiments. Combined with the stoichiometric studies, a mechanism is proposed in which both oxidative addition of the aldehyde to give an acyl hydride and insertion of the hydride into the alkene are reversible, with the latter occurring to give both linear and branched alkyl intermediates, although reductive elimination for the linear isomer is suggested to have a considerably lower barrier.

Aryl methyl sulfides as substrates for rhodium-catalyzed alkyne carbothiolation: arene functionalization with activating group recycling.

A Rh(I)-catalyzed method for the efficient functionalization of arenes is reported. Aryl methyl sulfides are combined with terminal alkynes to deliver products of carbothiolation. The overall process results in reincorporation of the original arene functional group, a methyl sulfide, into the products as an alkenyl sulfide. The carbothiolation process can be combined with an initial Rh(I)-catalyzed alkene or alkyne hydroacylation reaction in three-component cascade sequences. The utility of the alkenyl sulfide products is also demonstrated in simple carbo- and heterocycle-forming processes. We also provide mechanistic evidence for the course of this new process.

Enantioselective Synthesis of Pyrrolidines by a Phosphine-Catalyzed γ-Umpolung/ß-Umpolung Cascade.

Herein, we report an enantioselective catalytic annulation of electron-poor allenes with aminocrotonates. The reaction proceeds by the umpolung γ-amination of the allenoate and ß-umpolung intramolecular conjugate addition. The reaction provides ready access to pyrrolidines using a homochiral phosphepine catalyst, which allows most products to form in good yields (55-85%) with ≥95:5 er and ≥4:1 dr. An assisted tandem-catalytic variant is also viable, and mechanistic studies supporting the proposed reaction pathway are reported.

Polymer End Group Control through a Decarboxylative Cobalt-Mediated Radical Polymerization: New Avenues for Synthesizing Peptide, Protein, and Nanomaterial Conjugates.

Cobalt-mediated radical polymerizations (CMRPs) have been initiated by the radical decarboxylation of tetrachlorophthalimide activated esters. This allows for the controlled radical polymerization of activated monomers across a broad temperature range with a single cobalt species, with the incorporation of polymer end groups derived from simple carboxylic acid derivatives and termination with an organozinc reagent. This method has been applied to the synthesis of a polymer/graphene conjugate and a water-soluble protein/polymer conjugate, demonstrating the first examples of CMRP in graphene and protein conjugation.

Oxidative Cross-Coupling of Boron and Antimony Nucleophiles via Palladium(I).

The use of an isolatable, monomeric Pd(I) complex as a catalyst for the oxidative cross-coupling of aryl-antimony and aryl-boron nucleophiles is reported. This reaction tolerates a wide variety of substrates, with >20:1 selectivity for cross-coupled products. This strategy offers a new approach to achieving the selective cross-coupling of nucleophiles.

RAFT polymer cross-coupling with boronic acids.

The ability to modify the thiocarbonylthio end-groups of RAFT polymers is important for applications where an inert or highly functionalised material is required. Here we report a copper promoted cross-coupling reaction between RAFT polymer end-groups and aryl boronic acids. This method gives high conversion to the modified polymers, and is compatible with a wide variety of functional molecules.

Phosphine catalysed (5 + 1) annulation of ynone/cinnamates with primary amines.

The (5 + 1) annulation of ynone/cinnamates and related substrates with protected primary amines gives rise to isoquinolones, pyrrolidinones and pyrrolopiperazines in good to excellent yields under phosphine catalysis. The reaction is viable with chiral phosphines, although the selectivity is poor.

Activating group recycling in action: a rhodium-catalyzed carbothiolation route to substituted isoquinolines.

A new rhodium(I) catalyst allows practical and efficient alkyne carbothiolation reactions to be achieved on synthetically useful ketone-bearing aryl methyl sulfides. The carbothiolation adducts, featuring a 'recycled methyl sulfide' activating group, are convenient precursors to highly substituted isoquinolines.

O-substituted alkyl aldehydes for rhodium-catalyzed intermolecular alkyne hydroacylation: the utility of methylthiomethyl ethers.

Combining α-methylthiomethyl (MTM) ether substituted aldehydes and 1-alkynes in the presence of [Rh(dppe)]ClO(4) results in efficient intermolecular alkyne hydroacylation to deliver α-O-MTM-substituted enone products. The product MTM ethers can be converted to the free hydroxyl group either in situ, by the addition of water to the completed reaction, or in a separate operation, by the action of silver nitrate.