RESUMO
Exploiting the nonequilibrium transport of macromolecules makes it possible to increase the separation speed without any loss of separation resolution. Here we report the arrangement of a nanostructure array in microchannels to control equilibrium and nonequilibrium transports of macromolecules. The direct observation and separation of macromolecules in the nanopillar array reported here are the first to reveal the nonequilibrium transport, which has a potential to overcome the intrinsic trade-off between the separation speed and resolution.
RESUMO
We have developed a colorimetric measurement chip that measures triglycerides, total cholesterol, and high-density lipoprotein in 6 µL of whole blood collected with a painless needle. The chip can be used by patients to self-monitor certain health conditions at home. This chip contains a sharp 150 µm diameter stainless steel (SUS) needle that collects blood painlessly. The chip consists of three layers of injection-molded poly(methyl methacrylate) bonded together with two double-sided tapes. Two commercial reagents are used, and the volume ratio of plasma to reagent is doubled from the reagent specification to reduce the optical absorption length (and chip mass) by half. Centrifugal force separates the plasma from the blood, and then weighs out and mixes the plasma and reagents. A zigzag channel allows mixing of the plasma with the reagents mainly by vortex motion due to the centrifugal force generated at the corners of the channel. The measured values correlated well with conventionally tested values.
Assuntos
Serviços de Assistência Domiciliar/normas , Dispositivos Lab-On-A-Chip/normas , Agulhas/normas , Flebotomia/instrumentação , Flebotomia/normas , Colorimetria/normas , Humanos , Dor/prevenção & controleRESUMO
A nanowall array structure was fabricated on a quartz chip as a separation matrix of DNA fragments, and a 30 s separation was realized for a mixture of DNA fragments (48.5 and 1 kbp fragments) by applying the electric voltage. A longer DNA fragment migrates faster than a shorter one in a nanowall array chip, and it is completely different from the separation of DNA based on gel electrophoresis, nanopillar chips, and nanoparticle array chips. Although the result is similar to DNA separation by entropic trapping, it could not be fully explained by entropic trapping phenomena. Direct observation of single-DNA molecular dynamics inside a nanowall array structure indicates that both confined elongation and relaxation recoiling of a DNA molecule occur, and an elongated DNA molecule migrates faster than a recoiled DNA molecule. Numerical fitting of DNA molecular dynamics reveals that the balance between times for the transverse of a DNA molecule in the nanowall array chip and the relaxation-recoiling of a DNA molecule governs the separation of DNA.
Assuntos
DNA/análise , Nanopartículas/química , Análise de Sequência com Séries de Oligonucleotídeos/métodos , DNA/isolamento & purificação , Eletroforese em Gel de Ágar/métodos , QuartzoRESUMO
Dynamic control of cell adhesion on substrates is a useful technology in tissue engineering and basic biology. This paper describes a method for the control of cell adhesion on amino-bearing surfaces by reversible conjugation of an anti-fouling polymer, poly(ethylene glycol) (PEG), via a newly developed photocleavable linker, 1-(5-methoxy-2-nitro-4-prop-2-ynyloxyphenyl)ethyl N-succinimidyl carbonate (1). This molecule has alkyne and succinimidyl carbonate at each end, which are connected by photocleavable 2-nitrobenzyl ester. Under this molecular design, the molecule crosslinked azides and amines, whose linkage cleaved upon application of near-UV light. By using aminosilanised glass and silicon as model substrates, we studied their reversible surface modification with PEG-azide (M(w) = 5000) based on contact angle measurements, ellipsometry, and AFM morphological observations. Protein adsorption and cell adhesion dramatically changed by PEGylation and the following irradiation, which can be used for cellular patterning. Also, the capability of the substrate to change cell adhesiveness by photoirradiation during cell cultivation was demonstrated by inducing cell migration. We believe this method will be useful for dynamic patterning of cells on protein-based scaffolds.
Assuntos
Anisóis/química , Polietilenoglicóis/química , Succinimidas/química , Adesão Celular , Células HeLa , Humanos , Microscopia de Força Atômica , Fotólise , Espectrofotometria Ultravioleta , Propriedades de SuperfícieRESUMO
The development of methods for the off-on switching of immobilization or presentation of cell-adhesive peptides and proteins during cell culture is important because such surfaces are useful for the analysis of the dynamic processes of cell adhesion and migration. This paper describes a chemically functionalized gold substrate that captures a genetically tagged extracellular matrix protein in response to light. The substrate was composed of mixed self-assembled monolayers (SAMs) of three disulfide compounds containing (i) a photocleavable poly(ethylene glycol) (PEG), (ii) nitrilotriacetic acid (NTA) and (iii) hepta(ethylene glycol) (EG7). Although the NTA group has an intrinsic high affinity for oligohistidine tag (His-tag) sequences in its Ni2+-ion complex, the interaction was suppressed by the steric hindrance of coexisting PEG on the substrate surface. Upon photoirradiation of the substrate to release the PEG chain from the surface, this interaction became possible and hence the protein was captured at the irradiated regions, while keeping the non-specific adsorption of non-His-tagged proteins blocked by the EG7 underbrush. In this way, we selectively immobilized a His-tagged fibronectin fragment (FNIII7-10) to the irradiated regions. In contrast, when bovine serum albumin-a major serum protein-was added as a non-His-tagged protein, the surface did not permit its capture, with or without irradiation. In agreement with these results, cells were selectively attached to the irradiated patterns only when a His-tagged FNIII7-10 was added to the medium. These results indicate that the present method is useful for studying the cellular behavior on the specific extracellular matrix protein in cell-culturing environments.
RESUMO
A photoresponsive nanocarrier for amines based on gold nanoparticles (GNPs) having a photocleavable succinimidyl ester has been developed. It offers a useful platform for the synthesis of caged compounds. Using the GNPs, we have developed caged histamine for the first time and applied it to evoke intracellular signaling by controlled near-UV irradiation. The present work will allow for new possibilities in studies of inter- and intracellular signaling networks.
Assuntos
Aminas/química , Luz , Nanopartículas Metálicas/química , Transdução de Sinais/efeitos da radiação , Ouro , Projetos de PesquisaRESUMO
Quantitative DNA amplification using fluorescence labeling has played an important role in the recent, rapid progress of basic medical and molecular biological research. Here we report a label-free detection of real-time DNA amplification using a nanofluidic diffraction grating. Our detection system observed intensity changes during DNA amplification of diffracted light derived from the passage of a laser beam through nanochannels embedded in a microchannel. Numerical simulations revealed that the diffracted light intensity change in the nanofluidic diffraction grating was attributed to the change of refractive index. We showed the first case reported to date for label-free detection of real-time DNA amplification, such as specific DNA sequences from tubercle bacilli (TB) and human papillomavirus (HPV). Since our developed system allows quantification of the initial concentration of amplified DNA molecules ranging from 1 fM to 1 pM, we expect that it will offer a new strategy for developing fundamental techniques of medical applications.
Assuntos
DNA/análise , DNA/genética , Técnicas Analíticas Microfluídicas/métodos , Técnicas de Amplificação de Ácido Nucleico/métodos , Sistemas Computacionais , Dispositivos Lab-On-A-Chip , Técnicas Analíticas Microfluídicas/instrumentação , Nanotecnologia , Técnicas de Amplificação de Ácido Nucleico/instrumentação , RefratometriaRESUMO
Here we report that nanopillar array structures have an intrinsic ability to suppress electroosmotic flow (EOF). Currently using glass chips for electrophoresis requires laborious surface coating to control EOF, which works as a counterflow to the electrophoresis mobility of negatively charged samples such as DNA and sodium dodecyl sulfate (SDS) denatured proteins. Due to the intrinsic ability of the nanopillar array to suppress the EOF, we carried out electrophoresis of SDS-protein complexes in nanopillar chips without adding any reagent to suppress protein adsorption and the EOF. We also show that the EOF profile inside a nanopillar region was deformed to an inverse parabolic flow. We used a combination of EOF measurements and fluorescence observations to compare EOF in microchannel, nanochannel, and nanopillar array chips. Our results of EOF measurements in micro- and nanochannel chips were in complete agreement with the conventional equation of the EOF mobility (µ(EOF-channel) = αC(i)(-0.5), where C(i) is the bulk concentration of the i-ions and α differs in micro- and nanochannels), whereas EOF in the nanopillar chips did not follow this equation. Therefore we developed a new modified form of the conventional EOF equation, µ(EOF-nanopillar) ≈ ß[C(i) - (C(i)(2)/N(i))], where N(i) is the number of sites available to i-ions and ß differs for each nanopillar chip because of different spacings or patterns, etc. The modified equation of the EOF mobility that we proposed here was in good agreement with our experimental results. In this equation, we showed that the charge density of the nanopillar region, that is, the total number of nanopillars inside the microchannel, affected the suppression of EOF, and the arrangement of nanopillars into a tilted or square array had no effect on it.
Assuntos
Eletro-Osmose/métodos , Microtecnologia/métodos , Nanoestruturas/química , Eletroforese em Gel de Poliacrilamida , Desnaturação Proteica , Proteínas/química , Proteínas/isolamento & purificaçãoRESUMO
Patterned immobilization of synthetic and biological ligands on material surfaces with controlled surface densities is important for various bioanalytical and cell biological purposes. This paper describes the synthesis, characterization, and application of a novel silane coupling agent bearing a photoremovable succinimidyl carbonate, which enables the photopatterning of various primary amines on glass and silicon surfaces. The silane coupling agent is 1-[5-methoxy-2-nitro-4-(3-trimethoxysilylpropyloxy)phenyl]ethyl N-succinimidyl carbonate. The distinct feature of this molecule is that it has a photocleavable 2-nitrobenzyl switch between a trimethoxysilyl group and a succinimidyl carbonate, each reactive to the hydroxy groups of inorganic oxides and primary amines. Based on this molecular design, the compound allows for the one-step introduction of succinimidyl carbonates onto the surface of glass and silicon, immobilization of primary amines, and region-selective and dose-dependent release of the amines by near-UV irradiation. Therefore, we were able to pattern amine ligands on the substrates in given surface densities and arbitrary geometries by controlling the doses and regions of photoirradiation. These features were verified by UV-vis spectroscopy, contact angle measurements, infrared (IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), ellipsometry, and atomic force microscopy (AFM). The compound was applied to form a chemical density gradient of amino-biotin on a silicon substrate in a range of 0.87-0.12 chains/nm(2) by controlling photoirradiation under a standard fluorescence microscope. Furthermore, we also succeeded in forming a chemical density gradient at a lower surface density range (0.15-0.011 chains/nm(2)) on the substrate by diluting the feed amino-biotin with an inert control amine.
Assuntos
Aminas/química , Carbonatos/química , Reagentes de Ligações Cruzadas/química , Vidro/química , Silanos/química , Silício/química , Succinimidas/química , Reagentes de Ligações Cruzadas/síntese química , Microscopia de Força Atômica , Estrutura Molecular , Fotoquímica , Silanos/síntese química , Propriedades de SuperfícieRESUMO
This article describes a photochemical method for the site-selective assembly of heterotypic cells on a glass substrate modified with a silane coupling agent having a caged functional group. Silane coupling agents having a carboxyl (COOH), amino (NH 2), hydroxyl (OH), or thiol (SH) group protected by a photocleavable 2-nitrobenzyl group were synthesized to modify the surfaces of glass coverslips. The caged substrates were first coated by the adsorption of a blocking agent, bovine serum albumin (BSA), to make the entire surface non-cell-adhesive and then irradiated at 365 nm under a standard fluorescence microscope. The photocleavage reaction on the surface was followed by contact angle measurements and X-ray photoelectron spectroscopy. When COS7, NIH3T3, and HEK293 cells were seeded onto these substrates in a serum-free medium, the cells adhered selectively and efficiently to the irradiated regions on the caged NH 2 substrate, whereas the other caged COOH, SH, and OH substrates were nonphotoactivatable for cell adhesion. Qualitative and quantitative analysis of BSA adsorbed to the uncaged substrates revealed that this highly efficient photoactivation on the caged NH 2 substrate arose because of the following reasons: (i) upon photoactivation, BSA adsorbed in advance on the 2-nitrobenzyl groups was readsorbed onto the uncaged functional groups and (ii) BSA readsorbed onto the NH 2 groups became unable to passivate the surface against cell adhesion whereas BSA on the other groups still had normal passivating activity. It was also demonstrated that heterotypic single COS7, NIH3T3, and HEK293 cells were positioned at any desired arrangement on the caged NH 2 substrate by repeating the UV irradiation at optimized array spot sizes and cell seeding in optimized cell concentrations. The present method will be particularly useful in studying the dynamic processes of cell-cell interactions at a single-cell level.
Assuntos
Fotoquímica/métodos , Animais , Células COS , Bovinos , Linhagem Celular , Chlorocebus aethiops , Meios de Cultura Livres de Soro/metabolismo , Humanos , Luz , Camundongos , Modelos Químicos , Células NIH 3T3 , Soroalbumina Bovina/química , Silanos/química , Espectrofotometria Ultravioleta/métodos , Propriedades de SuperfícieRESUMO
Here we report an anomalous behavior of water, especially its viscosity and hydrodynamic flow, in a nanometer-confined space. As a typical model of a nanometer-confined space, the nanopillar chip, which was developed for DNA size-based separation was used, and single-particle tracking (SPT) technique was applied to investigate water viscosity and hydrodynamic flow in the nanopillar chip. The diffusion coefficients of nanospheres were almost one-third of the theoretical value derived from the Stokes-Einstein equation. This result gave indirect proof that water viscosity in a nanometer-confined space is higher than in a bulk solution. In order to improve resolution and throughput of the nanopillar chip for DNA separation, these potential factors affecting performance should be seriously considered.
RESUMO
During the electrophoresis separation of B- and T-cells from lymphocytes employing a microcapillary chip, they were found to become inactive in the reservoir after a short time. This was caused by the buffer solution becoming alkaline due to electrolysis. This was considered to take place in chips with small reservoir volumes. The pH change was confirmed by the ISFET (ion-sensitive field effect transistor) embedded in the chip. To suppress the pH change, two methods were studied. One is the insertion of a salt bridge just in front of and behind the capillary, thus introducing an electric potential but stopping flow of the acid and alkaline solutions into the capillary. The other is neutralization of the alkaline solution in the reservoir by injecting the acid solution produced in another capillary with the same structure by employing an electroosmotic flow (EOF) pump. Both methods achieved no pH change during electrophoresis measurements in the microcapillary.
Assuntos
Separação Celular/métodos , Eletroforese Capilar/instrumentação , Microquímica/instrumentação , Animais , Linfócitos B/citologia , Soluções Tampão , Separação Celular/instrumentação , Eletroforese Capilar/métodos , Desenho de Equipamento , Humanos , Concentração de Íons de Hidrogênio , Cinética , Microquímica/métodos , Linfócitos T/citologiaRESUMO
We investigate the possibility of geometrical electrophoresis, which is based on nanofabrication techniques. (GEE) utilizes geometrical effects during electrophoresis, which are generated by physical interactions between walls and a macromolecule confined in spaces smaller than the Flory radius. When a polymer is injected into a small space, confinement energy is usually required. However, the confinement energy form depends on the geometry of the space. In the case of electrophoresis, the electric field itself changes depending on the geometry. Using a nanofabricated quartz chip with a curved channel, we investigated electrophoretic behavior of high molecular weight DNA based on the curvature effect.
Assuntos
DNA/isolamento & purificação , Eletroforese/métodos , DNA Ligases/isolamento & purificação , Eletroforese/instrumentação , Desenho de Equipamento , Miniaturização , Nanotecnologia , Conformação de Ácido Nucleico , QuartzoRESUMO
Immunoanalysis of blood cells on a microcapillary electrophoresis (nuCE) chip has been studied using sheep erythrocytes (ShE) as an example. Two different buffer solutions, the phosphate-buffered saline (PBS) and the gelatin veronal buffer (GVB) were examined in regard to the electrokinetic transport behavior of ShE suspended in these solutions inside the rectangular channel engraved on a quartz chip. This clarified two advantages of the use of GVB for on-chip cell electrophoresis: gelatin coatings prevent (i) nonspecific sticking of ShE on the channel wall, and cause (ii) an appreciable reduction in the zeta potential of the wall suppressing the electroosmotic flow of the buffer solution. As a result ShE suspended in the GVB can smoothly migrate from the cathode to the anode, which is the opposite flow direction of immunoglobulin G (IgG) antibodies under the physiological pH condition of 7.4. Based on these results, on-chip capillary cell immunoelectrophoresis of ShE and rabbit anti ShE antibodies (IgG) have been proposed and successfully accomplished using the GVB. It is demonstrated that the variation of the cell migration velocity originating from the change in the surface charge after binding antibodies is applicable to the fast detection of immune reactions and also to single-cell typing.
Assuntos
Eritrócitos/citologia , Animais , Separação Celular/métodos , Eletroforese Capilar/métodos , Imunoeletroforese/métodos , Sensibilidade e Especificidade , Ovinos , SoluçõesRESUMO
Two types of low-voltage electroosmosis pumps were developed using microfabrication technology for usage in handy or stand-alone applications of the micrototal analysis systems (micro-TAS) and the lab-on-a-chip. This was done by making a thin (< 1 microm) region in the flow path and by only applying voltages near this thin region using electrodes inserted into the flow path. The inserted electrodes must be free from bubble formation and be gas-tight in order to avoid pressure leakage. For these electrodes, Ag/AgCl or a gel salt bridge was used. For patterning the gel on the chip, a hydrophilic photopolymerization gel and a photolithographic technique were optimized for producing a gel with higher electric conductivity and higher mechanical strength. For high flow rate application, wide (33.2 mm) and thin (400 nm) pumping channels were compacted into a 1 mm x 6 mm area by folding. This pump achieves an 800 Pa static pressure and a flow of 415 nL/min at 10 V. For high-pressure application, a pump was designed with the thin and thick regions in series and positive and negative electrodes were inserted between them alternatively. This pump could increase the pumping pressure without increasing the supply voltage. A pump with 10-stage connections generated a pressure of 25 kPa at 10 V.
Assuntos
Eletroforese Capilar/instrumentação , Osmose , Resinas Acrílicas , Eletrodos , Desenho de Equipamento , Géis , Fotoquímica , PressãoRESUMO
A two-dimensional microarray of ten thousand (100 x 100) hepatocyte heterospheroids, underlaid with endothelial cells, was successfully constructed with 100 microm spacing in an active area of 20 x 20 mm on microfabricated glass substrates that were coated with poly(ethylene glycol) brushes. Cocultivation of hepatocytes with endothelial cells was essential to stabilize hepatocyte viability and liver-specific functions, allowing us to obtain hepatocyte spheroids with a diameter of 100 microm, functioning as a miniaturized liver to secret albumin for at least one month. The most important feature of this study is that these substrates are defined to provide an unprecedented control of substrate properties for modulating cell behavior, employing both surface engineering and synthetic polymer chemistry. The spheroid array constructed here is highly useful as a platform of tissue and cell-based biosensors and detects a wide variety of clinically, pharmacologically, and toxicologically active compounds through a cellular physiological response.
Assuntos
Técnicas Biossensoriais , Hepatócitos/citologia , Polietilenoglicóis/química , Esferoides Celulares/citologia , Animais , Células Cultivadas , Células Endoteliais , Testes de Função Hepática , Análise de Sequência com Séries de Oligonucleotídeos , Ratos , Fatores de TempoRESUMO
We have established the nanofabrication technique for constructing nanopillars with high aspect ratio (100-500 nm diameter and 500-5000 nm tall) inside a microchannel on a quartz chip. The size of pillars and the spacing between pillars are designed as a DNA sieving matrix for optimal analysis of large DNA fragments over a few kilobase pairs (kbp). A chip with nanopillar channel and simple cross injector was developed based on the optimal design and applied to the separation of DNA fragments (1-38 kbp) and large DNA fragments (lambda DNA, 48.5 kbp; T4 DNA, 165.6 kbp) that are difficult to separate on conventional gel electrophoresis and capillary electrophoresis without a pulsed-field technique. DNA fragments ranging from 1 to 38 kbp were separated as clear bands, and furthermore, the mixture of lambda DNA and T4 DNA was successfully separated by a 380-microm-long nanopillar channel within only 10 s even under a direct current (dc) electric field. Theoretical plate number N of the channel (380-1450 microm long) was 1000-3000 (0.7 x 10(6)-2.1 x 10(6) plates/m). A single DNA molecule observation during electrophoresis in a nanopillar channel revealed that the optimal nanopillars induced T4 DNA to form a narrow U-shaped conformation during electrophoresis whereas lambda DNA kept a rather spherical conformation. We demonstrated that, even under a dc electric field, the optimal nanopillar dimensions depend on a gyration radius of DNA molecule that made it possible to separate large DNA fragments in a short time.