Evaluation of remediation process with soapberry derived saponin for removal of heavy metals from contaminated soils in Hai-Pu, Taiwan.

The use of a biodegradable natural plant-based surfactant extracted from soapberry is proposed for the remediation of Ni, Cr and Mn from industrial soil site in Hai-Pu, Taiwan. Batch experiments were performed under variation of fundamental factors (saponin concentration, pH, and incubation time) for metal remediation. Removal of Ni and Mn were increased with increasing saponin concentration (0.015-0.150 g/L), whereas the removal of Cr was increased upto 0.075 g/L saponin. The Ni, Cr and Mn were removed significantly (p < or = 0.05) at near to the neutral and slightly acidic (pH 5 to 8) conditions. Removal efficiency of Ni (99%) from the soil was found to be greater than that of Cr (73%) or Mn (25%) in the presence of saponin at a concentration of 0.150 g/L at pH 5. The removal percentage increased with incubation time where the removal of Ni was faster than that of Cr and Mn. The result indicates the feasibility of eco-friendly removal of heavy metal (Ni, Cr and Mn) from industrial soil by soil washing process in presence of plant derived saponin.

Green technological approach to synthesis hydrophobic stable crystalline calcite particles with one-pot synthesis for oil-water separation during oil spill cleanup.

The process of separating oil and water from oil/water mixtures is an attractive strategy to answer the menace caused by industrial oil spills and oily wastewater. In addition, water coproduced during hydrocarbon exploitation, which can be an economic burden and risk for freshwater resources, can become an important freshwater source after suitable water-oil separation. For oil-water separation purposes, considerable attention has been paid to the preparation of hydrophobic-oleophilic materials with modified surface roughness. However, due to issues of thermodynamic instability, costly and complex methods as well as lack of ecofriendly compounds, most of hydrophobic surface modified particles are of limited practical application. The study presents a facile procedure, to synthesize crystalline particles of calcite, which is the most stable polymorph of CaCO3 from industrial CaCO3 using oleic acid as an additive in a one-pot synthesis method. The XRD results show that the synthesized particles were a well-crystallized form of calcite. The FTIR results reflect the appearance of the alkyl groups from the oleic acid in synthesized particles which promotes the production of calcite with 'rice shape' (1.64 µm) (aggregated by spherical nanoparticle of 19.56 nm) morphology with concomitant changes in its surface wettability from hydrophilic to hydrophobic. The synthesized particles exhibited near to super hydrophobicity with ∼99% active ratio and a contact angle of 143.8°. The synthesized hydrophobic calcite particles had an oleophilic nature where waste diesel oil adsorption capacity of synthesized calcium carbonate (HCF) showed a very high (>99%) and fast (7 s) oil removal from oil-water mixture. The functional group of long alkyl chain including of CO bounds may play critical roles for adsorption of diesel oils. Moreover, the thermodynamically stable crystalline polymorph calcite (compared to vaterite) exhibited excellent recyclability. The isothermal study reflects the comparatively high value of correlation coefficient (R2 = 0.94) for the Langmuir isotherm compared to those of the Freundlich isotherm (R2 = 0.82) showed that the adsorption of diesel oil onto the hydrophobic CaCO3 adsorbent was much better described by the Langmuir isotherm. The kinetics study of second-order rate expression (R2 = 0.99) more fitted with the experimental data compare to first-order model (R2 = 0.92). The synthesized calcite exhibited a significant dual oleophilic and hydrophobic nature that can be applicable for oil adsorption/or removal purpose in oil contaminated areas in environment and/or industrial oily wastewater for green, simple, and inexpensive environmental cleanup.

Removal of Cu, Pb and Zn by foam fractionation and a soil washing process from contaminated industrial soils using soapberry-derived saponin: a comparative effectiveness assessment.

The feasibility of using the eco-friendly biodegradable surfactant saponin (a plant-based surfactant) from soapberry and surfactin from Bacillus subtilis (BBK006) for the removal of heavy metals from contaminated industrial soil (6511mgkg(-1) copper, 4955mgkg(-1) lead, and 15090mgkg(-1) zinc) by foam fractionation and a soil flushing process was evaluated under variation of fundamental factors (surfactant concentration, pH, temperature and time). The results of latter process showed that 1-2% Pb, 16-17% Cu and 21-24% Zn was removed by surfactin after 48h, whereas the removal of Pb, Cu and Zn was increased from 40% to 47%, 30% to 36% and 16% to 18% in presence of saponin with an increase from 24 to 72h at room temperature by the soil washing process at pH 4. In the foam fractionation process, the metal removal efficiencies were increased with increases in the saponin concentration (0.075-0.15gL(-1)) and time (24-72h), whereas the efficiency was decreased with increasing pH (4-10) and temperature (>40°C). The removal efficiencies of Pb, Cu and Zn were increased significantly from 57% to 98%, 85% to 95% and 55% to 56% with an increase in the flow rate from 0.2 to 1.0Lmin(-1) at 0.15gL(-1) saponin (pH 4 and 30°C). The present investigation indicated that the foam fractionation process is more efficient for the removal of heavy metal from contaminated industrial soil in comparison to the soil washing process. The plant-based eco-friendly biodegradable biosurfactant saponin can be used for environmental cleanup and pollution management.