RESUMO
Here, a molecular-design and carbon dot-confinement coupling strategy through the pyrolysis of bimetallic complex of diethylenetriamine pentaacetic acid under low-temperature is proposed as a universal approach to dual-metal-atom sites in carbon dots (DMASs-CDs). CDs as the "carbon islands" could block the migration of DMASs across "islands" to achieve dynamic stability. More than twenty DMASs-CDs with specific compositions of DMASs (pairwise combinations among Fe, Co, Ni, Mn, Zn, Cu, and Mo) have been synthesized successfully. Thereafter, high intrinsic activity is observed for the probe reaction of urea oxidation on NiMn-CDs. In situ and ex situ spectroscopic characterization and first-principle calculations unveil that the synergistic effect in NiMn-DMASs could stretch the urea molecule and weaken the N-H bond, endowing NiMn-CDs with a low energy barrier for urea dehydrogenation. Moreover, DMASs-CDs for various target electrochemical reactions, including but not limited to urea oxidation, are realized by optimizing the specific DMAS combination in CDs.
RESUMO
Developing highly active yet stable catalysts for the hydrogen oxidation reaction (HOR) in alkaline media remains a significant challenge. Herein, we designed a novel catalyst of atomic PtPd-layer shelled ultrasmall PdCu hollow nanoparticles (HPdCu NPs) on partially unzipped carbon nanotubes (PtPd@HPdCu/W-CNTs), which can achieve a high mass activity, 5 times that of the benchmark Pt/C, and show exceptional stability with negligible decay after 20,000 cycles of accelerated degradation test. The atomically thin PtPd shell serves as the primary active site for the HOR and a protective layer that prevents Cu leaching. Additionally, the HPdCu substrate not only tunes the adsorption properties of the PtPd layer but also prevents corrosive Pt from reaching the interface between NPs and the carbon support, thereby mitigating carbon corrosion. This work introduces a new strategy that leverages the distinct advantages of multiple components to address the challenges associated with slow kinetics and poor durability toward the HOR.
RESUMO
Hydrogen peroxide (H2O2) plays a pivotal role in advancing sustainable technologies due to its eco-friendly oxidizing capability. The electrochemical two-electron (2e-) oxygen reduction reaction and water oxidation reaction present an environmentally green method for H2O2 production. Over the past three years, significant progress is made in the field of carbon-based metal-free electrochemical catalysts (C-MFECs) for low-cost and efficient production of H2O2 (H2O2EP). This article offers a focused and comprehensive review of designing C-MFECs for H2O2EP, exploring the construction of dual-doping configurations, heteroatom-defect coupling sites, and strategic dopant positioning to enhance H2O2EP efficiency; innovative structural tuning that improves interfacial reactant concentration and promote the timely release of H2O2; modulation of electrolyte and electrode interfaces to support the 2e- pathways; and the application of C-MFECs in reactors and integrated energy systems. Finally, the current challenges and future directions in this burgeoning field are discussed.
RESUMO
Oxygen reduction reaction (ORR) is vital for clean and renewable energy technologies, which require no fossil fuel but catalysts. Platinum (Pt) is the best-known catalyst for ORR. However, its high cost and scarcity have severely hindered renewable energy devices (e.g., fuel cells) for large-scale applications. Recent breakthroughs in carbon-based metal-free electrochemical catalysts (C-MFECs) show great potential for earth-abundant carbon materials as low-cost metal-free electrocatalysts towards ORR in acidic media. This article provides a focused, but critical review on C-MFECs for ORR in acidic media with an emphasis on advances in the structure design and synthesis, fundamental understanding of the structure-property relationship and electrocatalytic mechanisms, and their applications in proton exchange membrane fuel cells. Current challenges and future perspectives in this emerging field are also discussed.
RESUMO
Since the discovery of N-doped carbon nanotubes as the first carbon-based metal-free electrocatalyst (C-MFEC) for oxygen reduction reaction (ORR) in 2009, C-MFECs have shown multifunctional electrocatalytic activities for many reactions beyond ORR, such as oxygen evolution reaction (OER), hydrogen evolution reaction (HER), carbon dioxide reduction reaction (CO2RR), nitrogen reduction reaction (NRR), and hydrogen peroxide production reaction (H2O2PR). Consequently, C-MFECs have attracted a great deal of interest for various applications, including metal-air batteries, water splitting devices, regenerative fuel cells, solar cells, fuel and chemical production, water purification, to mention a few. By altering the electronic configuration and/or modulating their spin angular momentum, both heteroatom(s) doping and structural defects (e.g., atomic vacancy, edge) have been demonstrated to create catalytic active sites in the skeleton of graphitic carbon materials. Although certain C-MFECs have been made to be comparable to or even better than their counterparts based on noble metals, transition metals and/or their hybrids, further research and development are necessary in order to translate C-MFECs for practical applications. In this article, we present a timely and comprehensive, but critical, review on recent advancements in the field of C-MFECs within the past five years or so by discussing various types of electrocatalytic reactions catalyzed by C-MFECs. An emphasis is given to potential applications of C-MFECs for energy conversion and storage. The structure-property relationship for and mechanistic understanding of C-MFECs will also be discussed, along with the current challenges and future perspectives.
RESUMO
Owing to their low cost, high catalytic efficiency and biocompatibility, carbon-based metal-free catalysts (C-MFCs) have attracted intense interest for various applications, ranging from energy through environmental to biomedical technologies. While considerable effort and progress have been made in mechanistic understanding of C-MFCs for non-biomedical applications, their catalytic mechanism for therapeutic effects has rarely been investigated. In this study, defect-rich graphene quantum dots (GQDs) were developed as C-MFCs for efficient ROS generation, specifically in the H2O2-rich tumor microenvironment to cause multi-level damages of subcellular components (even in nuclei). While a desirable anti-cancer performance was achieved, the catalytic performance was found to strongly depend on the defect density. It is for the first time that the defect-induced catalytic generation of ROS by C-MFCs in the tumor microenvironment was demonstrated and the associated catalytic mechanism was elucidated. This work opens a new avenue for the development of safe and efficient catalytic nanomedicine.
Assuntos
Pontos Quânticos , Espécies Reativas de Oxigênio , Microambiente Tumoral/efeitos dos fármacos , Animais , Antineoplásicos/química , Antineoplásicos/farmacologia , Linhagem Celular Tumoral , Sobrevivência Celular/efeitos dos fármacos , Grafite/química , Grafite/farmacologia , Humanos , Peróxido de Hidrogênio/metabolismo , Peróxido de Hidrogênio/farmacologia , Células MCF-7 , Camundongos , Células NIH 3T3 , Espécies Reativas de Oxigênio/metabolismo , Espécies Reativas de Oxigênio/farmacologiaRESUMO
Pt atomic clusters (Pt-ACs) display outstanding electrocatalytic performance because of their unique electronic structure with a large number of highly exposed surface atoms. However, the small size and large specific surface area intrinsically associated with ACs pose challenges in the synthesis and stabilization of Pt-ACs without agglomeration. Herein, we report a novel one-step carbon-defect-driven electroless deposition method to produce ultrasmall but well-defined and stable Pt-ACs supported by defective graphene (Pt-AC/DG) structures. A theoretical simulation clearly revealed that the defective regions with a lower work function and hence a higher reducing capacity compared to those of normal hexagonal sites triggered the reduction of Pt ions preferentially at the defect sites. Moreover, the strong binding energy between Pt and carbon defects effectively restricted the migration of spontaneously reduced Pt atoms to immobilize/stabilize the resultant Pt-ACs. Electrochemical analyses demonstrated the high performance of Pt-ACs in catalyzing the hydrogen evolution reaction, showing a greatly enhanced mass activity, a high Pt utilization efficiency, and excellent stability compared with commercial Pt/C catalysts. The integration of proton exchange membrane water electrolysis with Pt-AC/DG as a cathode exhibited an excellent hydrogen generation activity and extraordinary stability (during 200 h of electrolysis) with a greatly reduced Pt usage compared with commercial Pt/C catalysts.
RESUMO
Metal-CO2 batteries have attracted much attention owing to their high energy density and use of greenhouse CO2 waste as the energy source. However, the increasing cost of lithium and the low discharge potential of Na-CO2 batteries create obstacles for practical applications of Li/Na-CO2 batteries. Recently, earth-abundant potassium ions have attracted considerable interest as fast ionic charge carriers for electrochemical energy storage. Herein, we report the first K-CO2 battery with a carbon-based metal-free electrocatalyst. The battery shows a higher theoretical discharge potential (Eâ =2.48â V) than that of Na-CO2 batteries (Eâ =2.35â V) and can operate for more than 250 cycles (1500â h) with a cutoff capacity of 300â mA h g-1 . Combined DFT calculations and experimental observations revealed a reaction mechanism involving the reversible formation and decomposition of P121 /c1-type K2 CO3 at the efficient carbon-based catalyst.
RESUMO
Microporous N,P-codoped graphitic nanosheets (N,P-CMP-1000) were synthesized by thermal annealing (1000 °C) of as-synthesized conjugated microporous polymers (CMPs) in the presence of phytic acid, which can be used as an effective metal-free electrocatalyst for the oxygen reduction reaction (ORR) for energy conversion. In the whole pH range (i.e. alkaline, acidic, and neutral solutions), the obtained N,P-CMP-1000 exhibits superior electrocatalytic activity for ORR with a low overpotential, high current density, and good stability. Furthermore, N,P-CMP-1000 can also be applied for electrochemically sensing dissolved oxygen (DO), with a high sensitivity (1.89â µA mg-1 L) and broad detection range (2.56 to 16.65â mg L-1 ) due to its good electrocatalytic performance towards ORR in neutral solution. In vitro cytotoxicity tests (CCK-8 and Live/Dead Cell Double Staining Assay) of N,P-CMP-1000 extracts demonstrated its good biocompatibility to Human Corneal Epithelial Cells (HCEC), which shows its great potential as an eye-wearable biosensor for sensing DO in tears.
RESUMO
Besides their use in fuel cells for energy conversion through the oxygen reduction reaction (ORR), carbon-based metal-free catalysts have also been demonstrated to be promising alternatives to noble-metal/metal oxide catalysts for the oxygen evolution reaction (OER) in metal-air batteries for energy storage and for the splitting of water to produce hydrogen fuels through the hydrogen evolution reaction (HER). This Review focuses on recent progress in the development of carbon-based metal-free catalysts for the OER and HER, along with challenges and perspectives in the emerging field of metal-free electrocatalysis.
RESUMO
A seaweed-like graphitic-C3N4 (g-C3N4 "seaweed") architecture has been prepared by direct calcination of the freeze-drying-assembled, hydrothermally treated dicyandiamide fiber network. The seaweed network of mesoporous g-C3N4 nanofibers is favorable for light harvesting, charge separation and utilization of active sites, and has highly efficient photocatalytic behavior for water splitting. It exhibits a high hydrogen-evolution rate of 9900â µmol h(-1) g(-1) (thirty times higher than that of its g-C3N4 bulk counterpart), and a remarkable apparent quantum efficiency of 7.8% at 420â nm, better than most of the g-C3N4 nanostructures reported. This work presents a very simple method for designing and developing high-performance catalysts for hydrogen evolution.
RESUMO
3D graphene interconnected frameworks homogeneously connected with a few-layer graphene film (3DG/FLG) constitute a novel hierarchical hybrid structure for anodes in lithium-ion batteries. The pore-rich 3D graphene network is favorable for Li(+) diffusion and electron transport, and the FLG is a non-metallic current collector that effectively collects/transports charge carriers from/to the 3D graphene network and provides an excellent scaffold to support the 3DG.
RESUMO
Graphene quantum dots (GQDs) have been successfully deposited onto the three-dimensional graphene (3DG) by a benign electrochemical method and the ordered 3DG structure remains intact after the uniform deposition of GQDs. In addition, the capacitive properties of the as-formed GQD-3DG composites are evaluated in symmetrical supercapacitors. It is found that the supercapacitor fabricated from the GQD-3DG composite is highly stable and exhibits a high specific capacitance of 268 F g(-1), representing a more than 90% improvement over that of the supercapacitor made from pure 3DG electrodes (136 F g(-1)). Owing to the convenience of the current method, it can be further used in other well-defined electrode materials, such as carbon nanotubes, carbon aerogels and conjugated polymers to improve the performance of the supercapacitors.
RESUMO
Rechargeable Zinc-iodine batteries (ZIBs) are gaining attention as energy storage devices due to their high energy density, low-cost, and inherent safety. However, the poor cycling performance of these batteries always arises from the severe leakage and shuttle effect of polyiodides (I3 - and I5 -). Herein, a novel cationic pyridine-rich covalent triazine framework (CCTF-TPMB) is developed to capture and confine iodine (I2) species via strong electrostatic interaction, making it an attractive host for I2 in ZIBs. The as-fabricated ZIBs with I2 loaded CCTF-TPMB (I2@CCTF-TPMB) cathode achieve a large specific capacity of 243 mAh g-1 at 0.2 A g-1 and an exceptionally stable cyclic performance, retaining 93.9% of its capacity over 30 000 cycles at 5 A g-1. The excellent electrochemical performance of the ZIBs can be attributed to the pyridine-rich cationic sites of CCTF-TPMB, which effectively suppress the leakage and shuttle of polyiodides, while also accelerating the conversion reaction of I2 species. Combined in situ Raman and UV-vis analysis, along with theoretical calculations, clearly reveal the critical role played by pyridine-rich cationic sites in boosting the ZIBs performances. This work opens up a promising pathway for designing advanced I2 cathode materials toward next-generation ZIBs and beyond.
RESUMO
Platinum-based materials exhibit a broad spectrum of biological activities, including antioxidant, anti-inflammatory, antimicrobial, and pro-collagen synthesis properties, making them particularly useful for various biomedical applications. This review summarizes the biological effects and therapeutic potential of platinum-based active ingredients in dermatological and skincare applications. We discuss their synthesis methods and their antioxidant, anti-inflammatory, antimicrobial, and collagen synthesis properties, which play essential roles in treating skin conditions including psoriasis and acne, as well as enhancing skin aesthetics in anti-aging products. Safety and sustainability concerns, including the need for green synthesis and comprehensive toxicological assessments to ensure safe topical applications, are also discussed. By providing an up-to-date overview of current research, we aim to highlight both the potential and the current challenges of platinum-based active ingredients in advancing dermatology and skincare solutions.
RESUMO
Conventional H2-O2 fuel cells suffer from the low output voltage, insufficient durability, and high-cost catalysts (e.g., noble metals). Herein, this work reports a conceptually new coupled flow fuel cell (CF-FC) by coupling asymmetric electrolytes for acidic oxygen reduction reaction and alkaline hydrogen oxidation reaction. By introducing an electrochemical neutralization energy, the newly-developed CF-FCs possess a significantly increased theoretical open-circuit voltage. Specifically, a CF-FC based on a typical transition metal single-atom Fe-N-C cathode catalyst demonstrates a high electricity output up to 1.81 V and durability with an ultrahigh retention of 91% over 110 h, far superior to the conventional fuel cells (usually, < 1.0 V, < 50% retention over 20 h). The output performance can even be significantly enhanced easily by connecting multiple CF-FCs into the parallel, series, or combined parallel-series connections at a fractional cost of that for the conventional H2-O2 fuel cells, showing great potential for large-scale practical applications. Thus, this study provides a platform to transform conventional fuel cell technology through the rational design and development of advanced energy conversion and storage devices by coupling different electrocatalytic reactions.
RESUMO
We report here an asymmetric N,S-coordinated cobalt-based single-atom catalyst with sulfur (S)-bridge ligands (Co-N/S-C) for the oxygen reduction reaction (ORR). The Co-N/S-C exhibits a half-wave potential (E1/2) of 0.908 V versus RHE, outperforming most state-of-the-art ORR catalysts. Theoretical calculations indicate that the CoN3SC10-S moiety facilitates the ORR kinetics by optimizing the adsorption of intermediates. This work provides new insights into the design of single-atom catalysts for electrocatalysis through heteroatom-bridge ligand engineering.
RESUMO
Two typical Cu-based complex catalysts with piperazine (PR) and p-phenylenediamine (pPDA) ligands were designed to elucidate whether the ligands can tailor the reduction behavior of the Cu species and thus modulate their electrochemical CO2 reduction reaction (eCO2RR) activity. Specifically, Cu-PR underwent a significant in situ transformation into Cu nanoparticles enriched with a Cuδ+/Cu0 interface for high eCO2RR activity, compared to Cu-pPDA. This finding reveals the importance of ligand engineering in modulating the eCO2RR performance of Cu-based complexes.
RESUMO
A facile and low-cost strategy is developed to prepare three-dimensional (3D) macroporous NiCo2 O4 sheets, which can be used as a highly efficient non-noble metal electrocatalyst for the oxygen reduction reaction (ORR) in alkaline conditions. The as-obtained sheets have a thickness of about 150â nm and feature a typical 3D macroporous structure with pore volumes of up to 0.23â cm(3) g(-1) , which could decrease the mass transport resistance and allow easier access of the reactants to the active surface sites. The as-prepared macroporous NiCo2 O4 sheets exhibit high electrocatalytic activity for ORR with a four-electron pathway, good long-term stability and high tolerance against methanol. The unique 3D macroporous structure and intrinsic properties may be responsible for their high performance.
RESUMO
3D Fe3O4-graphene nanocomposites were conveniently prepared via a direct hydrothermal grafting method. On the basis of the unique properties of both single-crystalline Fe3O4 and 3D chemically reduced graphene oxide, with characteristics such as ultralow density and high surface area, the as-prepared graphene-Fe3O4 nanocomposites showed high-performance microwave absorption ability and have the potential for application as advanced microwave absorbers.