Ultrathin quantum light source with van der Waals NbOCl2 crystal.

Interlayer electronic coupling in two-dimensional materials enables tunable and emergent properties by stacking engineering. However, it also results in significant evolution of electronic structures and attenuation of excitonic effects in two-dimensional semiconductors as exemplified by quickly degrading excitonic photoluminescence and optical nonlinearities in transition metal dichalcogenides when monolayers are stacked into van der Waals structures. Here we report a van der Waals crystal, niobium oxide dichloride (NbOCl2), featuring vanishing interlayer electronic coupling and monolayer-like excitonic behaviour in the bulk form, along with a scalable second-harmonic generation intensity of up to three orders higher than that in monolayer WS2. Notably, the strong second-order nonlinearity enables correlated parametric photon pair generation, through a spontaneous parametric down-conversion (SPDC) process, in flakes as thin as about 46 nm. To our knowledge, this is the first SPDC source unambiguously demonstrated in two-dimensional layered materials, and the thinnest SPDC source ever reported. Our work opens an avenue towards developing van der Waals material-based ultracompact on-chip SPDC sources as well as high-performance photon modulators in both classical and quantum optical technologies1-4.

Initiating a High-Rate and Stable Aqueous Air Battery by Using Organic N-Heterocycle Anode.

Alkaline metal-air batteries are advantageous in high voltage, low cost, and high safety. However, metal anodes are heavily eroded in strong alkaline electrolytes, causing serious side reactions including dendrite growth, passivation, and hydrogen evolution. To address this limitation, we successfully synthesized an organic N-heterocycle compound (NHCC) to serve as an alternative anode. This compound not only exhibits remarkable stability but also possesses a low redox potential (-1.04 V vs. Hg/HgO) in alkaline environments. To effectively complement the low redox potential of the NHCC anode, we designed a dual-salt highly concentrated electrolyte (4.0 M KOH+10.0 M KCF3 SO3 ). This electrolyte expands the electrochemical stability window to 2.3 V through the robust interaction between the O atom in H2 O molecule with the K+ of KCF3 SO3 (H-O⋅⋅⋅KCF3 SO3 ). We further demonstrated the K+ uptaken/extraction storage mechanism of NHCC anodes. Consequently, the alkaline aqueous NHCC anode-air batteries delivers a high battery voltage of 1.6 V, high-rate performance (101.9 mAh g-1 at 100 A g-1 ) and long cycle ability (30,000 cycles). Our work offers a molecular engineering strategy for superior organic anode materials and develops a novel double superconcentrated conductive salt electrolyte for the construction of high-rate, long-cycle alkaline aqueous organic anode-air batteries.

Engineering Fluorine-rich Double Protective Layer on Zn Anode for Highly Reversible Aqueous Zinc-ion Batteries.

The high thermodynamic instability and side reactions of Zn-metal anode (ZMA), especially at high current densities, greatly impede the commercialization of aqueous zinc-ion batteries (AZIBs). Herein, a fluorine-rich double protective layer strategy is proposed to obtain the high reversibility of AZIBs through the introduction of a versatile tetradecafluorononane-1,9-diol (TDFND) additive in aqueous electrolyte. TDFND molecule with large adsorption energy (-1.51 eV) preferentially absorbs on the Zn anode surface to form a Zn(OR)2 - (R=-CH2 -(CF2 )7 -CH2 -) cross-linking complex network, which balances space electric field and controls the Zn2+ ion flux, thus enabling the uniform and compact deposition of Zn (002) crystal planes. Meanwhile, TDFND with low Lowest unoccupied molecular orbital (LUMO, 0.10 eV) energy level is priorly decomposed to regulate the interfacial chemistry of ZMA by building a ZnF2 -rich solid electrode/electrolyte interface (SEI) layer. It is found that a 14 nm-thick SEI layer delivers excellent structural integrity to suppress parasitic reactions by blocking the direct contact of active water and ZMA. Consequently, the Zn electrode exhibits a superior cycling life over 430 h at 10 mA cm-2 and a high average Coulombic efficiency of 99.8 % at 5 mA cm-2 . Furthermore, a 68 mAh pouch cell delivers 80.3 % capacity retention for 1000 cycles.

B-Site Columnar-Ordered Halide Double Perovskites: Theoretical Design and Experimental Verification.

Halide double perovskites A2B(I)B(III)X6, in which monovalent B(I) and trivalent B(III) cations are arranged in the B-sites of the perovskite structure with a rock-salt ordering, have attracted substantial interest in the field of optoelectronics. However, the rock-salt ordering generally leads to low electronic dimensionality, with relatively large bandgaps and large carrier effective masses. In this work, we demonstrate, by density functional theory (DFT) calculations, that the electronic dimensionality and thus the electronic properties of halide double perovskites can be effectively modulated by manipulating the arrangement of the B-site cations. Through symmetry analysis and DFT calculations, we propose a family of halide double perovskites A2B(I)B(II)X5 where the B-site cations adopt a columnar-ordered arrangement. Among the considered compounds, Cs2AgPdCl5, Cs2AgPdBr5, and Cs2AgPtCl5 were successfully synthesized as the first examples of the B-site columnar-ordered halide double perovskites. These compounds exhibit small bandgaps of 1.33-1.77 eV that are suitable for visible light absorption, small carrier effective masses along the octahedra chains, and good thermal and air stability. Our work provides a prototype double perovskite structure to incorporate cations in +1 and +2 oxidation states, which may significantly expand the large family of the halide double perovskites and offer a platform to explore prospective optoelectronic semiconductors.

Phase Evolution of Multi-Metal Dichalcogenides With Conversion-Alloying Hybrid Mechanism for Superior Lithium Storage.

Traditional lithium-ion battery (LIB) anodes, whether intercalation-type like graphite or alloying-type like silicon, employing a single lithium storage mechanism, are often limited by modest capacity or substantial volume changes. Here, the kesterite multi-metal dichalcogenide (CZTSSe) is introduced as an anode material that harnesses a conversion-alloying hybrid lithium storage mechanism. Results unveil that during the charge-discharge processes, the CZTSSe undergoes a comprehensive phase evolution, transitioning from kesterite structure to multiple dominant phases of sulfides, selenides, metals, and alloys. The involvement of multi-components facilitates electron transport and mitigates swelling stress; meanwhile, it results in formation of abundant defects and heterojunctions, allowing for increased lithium storage active sites and reduced lithium diffusion barrier. The CZTSSe delivers a high specific capacity of up to 2266 mA h g-1 at 0.1 A g-1; while, maintaining a stable output of 116 mA h g-1 after 10 000 cycles at 20 A g-1. It also demonstrates remarkable low-temperature performance, retaining 987 mA h g-1 even after 600 cycles at -40 °C. When employed in full cells, a high specific energy of 562 Wh kg-1 is achieved, rivalling many state-of-the-art LIBs. This research offers valuable insights into the design of LIB electrodes leveraging multiple lithium storage mechanisms.

Material exploration via designing spatial arrangement of octahedral units: a case study of lead halide perovskites.

Halide perovskites have attracted tremendous attention as semiconducting materials for various optoelectronic applications. The functional metal-halide octahedral units and their spatial arrangements play a key role in the optoelectronic properties of these materials. At present, most of the efforts for material exploration focus on substituting the constituent elements of functional octahedral units, whereas designing the spatial arrangement of the functional units has received relatively little consideration. In this work, via a global structure search based on density functional theory (DFT), we discovered a metastable three-dimensional honeycomb-like perovskite structure with the functional octahedral units arranged through mixed edge- and corner-sharing. We experimentally confirmed that the honeycomb-like perovskite structure can be stabilized by divalent molecular cations with suitable size and shape, such as 2,2'-bisimidazole (BIM). DFT calculations and experimental characterizations revealed that the honeycomb-like perovskite with the formula of BIMPb2I6, synthesized through a solution process, exhibits high electronic dimensionality, a direct allowed bandgap of 2.1 eV, small effective masses for both electrons and holes, and high optical absorption coefficients, which indicates a significant potential for optoelectronic applications. The employed combination of DFT and experimental study provides an exemplary approach to explore prospective optoelectronic semiconductors via spatially arranging functional units.

An ultrathin memristor based on a two-dimensional WS2/MoS2 heterojunction.

Memristors are regarded as one of the key devices to break through the traditional Von Neumann computer architecture due to their capability of simulating the function of neural synapses. Among various memristive materials, two-dimensional (2D) materials are promising candidates to build advanced memristors with extremely high integration density and low power consumption. However, memristors based on 2D materials usually suffer from poor endurance and retention due to their vulnerability to material degradation during the formation/fusing processes of conductive filament channels within the switching media of 2D materials. Here, a new memristor architecture based on a WS2/MoS2 2D semiconducting heterojunction (metal/heterojunction/metal, MHM) is proposed, which is completely different from the conventional metal/insulator/metal (MIM) sandwich structure. Through the introduction of a type-II 2D heterojunction, a resistance switching mechanism based on band modulation rather than the conductive filaments can be realized to eliminate the material degradation during the set/reset processes. A prototype MHM memristor based on the WS2/MoS2 heterojunction is successfully developed with a large switching on/off ratio up to 104 and a clearly extended endurance over 120 switching cycles, showing the advantage of the 2D WS2/MoS2 heterojunction over the individual MoS2 or WS2 layers in memristive performance. The proposed method for the MHM-type 2D memristor has the potential to achieve a large-scale integrated memristor matrix with low power consumption and high integration density, which is promising for future artificial intelligence and brain-like computing systems.

Material Design and Optoelectronic Properties of Three-Dimensional Quadruple Perovskite Halides.

The discovery of new halide perovskite-type structures could favor the exploration of optoelectronic materials, as in the case of double perovskites applied in solar cells, light-emitting diodes, and X-ray detectors. In this work, we propose a strategy for designing quadruple perovskites by heterovalent cation transmutation from double perovskites. Two stable quadruple perovskite halides, i.e., Cs4CdSb2Cl12 and Cs4CdBi2Cl12, with a vacancy-ordered three-dimensional (3D) crystal structure were predicted through symmetry analysis and density functional theory (DFT) calculations. The title perovskite halides are also electronically 3D with direct forbidden bandgaps. Following the indication provided by the DFT results, Cs4CdSb2Cl12 and Cs4CdBi2Cl12 as unique quadruple perovskites were successfully synthesized by a solvothermal method. The steady-state photoluminescence (PL) shows wide emission, while the transient PL exhibits carrier recombination lifetime on the order of microseconds at low temperature. The quadruple perovskite halides provide an alternative platform for promising optoelectronic material design in addition to simple and double perovskites.