Hydrophilic interaction chromatographic evaluation of zwitterionic polymer grafted silica gel via multiple binding sites.

A novel zwitterionic polymer grafted silica stationary phase, Sil-PZIC, was prepared by bonding poly(ethylene maleic anhydride) molecules on the surface of silica via multiple binding sites, followed by ammonolysis of maleic anhydride through a nucleophilic substitution reaction with ethylenediamine. The stationary phase was characterized by solid-state 13C nuclear magnetic resonance, zeta potential, and elemental analysis and the results show the successful encapsulation of zwitterionic polymer on the surface of silica. The chromatographic performance of Sil-PZIC was investigated by using nucleosides and nucleic bases as test analytes The variation of retention and separation performance of these model compounds were investigated by varying the chromatographic conditions such as the components of mobile phase, salt concentration, and pH. The results show that the retention of the Sil-PZIC phase was dominated by a hydrophilic partitioning mechanism accompanied by secondary interactions such as electrostatic and hydrogen bonding. In addition, saccharides and Amadori compounds were also well separated on the Sil-PZIC, indicating that the Sil-PZIC column has potential application for separation of the polar compound.

Fully alloyed Ag/Au nanospheres: combining the plasmonic property of Ag with the stability of Au.

We report that fully alloyed Ag/Au nanospheres with high compositional homogeneity ensured by annealing at elevated temperatures show large extinction cross sections, extremely narrow bandwidths, and remarkable stability in harsh chemical environments. Nanostructures of Ag are known to have much stronger surface plasmon resonance than Au, but their applications in many areas have been very limited by their poor chemical stability against nonideal chemical environments. Here we address this issue by producing fully alloyed Ag/Au nanospheres through a surface-protected annealing process. A critical temperature has been found to be around 930 °C, below which the resulting alloy nanospheres, although significantly more stable than pure silver nanoparticles, can still gradually decay upon extended exposure to a harsh etchant. Nanospheres annealed above the critical temperature show a homogeneous distribution of Ag and Au, minimal crystallographic defects, and the absence of structural and compositional interfaces, which account for the extremely narrow bandwidths of the surface plasmon resonance and may enable many plasmonic applications with high performance and long lifetime, especially for those involving corrosive species.

Photonic labyrinths: two-dimensional dynamic magnetic assembly and in situ solidification.

Creating novel structures by self-assembly processes and fixing the resultant assemblies are both critical to the design and fabrication of functional materials through bottom-up approaches. We demonstrate magnetically induced self-assembly of 2D photonic labyrinth structures and their solidification through a sol-gel method. The photonic labyrinth structures can be patterned into more regular arrangements using nonmagnetic substrates. This work may provide a platform for fabricating novel materials and devices with complex morphologies and spatial configurations.

Preparation and evaluation of a pyridine sulfonate betaine-based zwitterionic stationary phase for hydrophilic interaction chromatography.

A zwitterionic stationary phase comprising pyridinium cations and sulfonate anions was successfully developed through thiol-ene click chemistry. Using seven polar small molecules as probes, the zwitterionic stationary phase showed high separation selectivity and excellent column efficiency (35,200-54,800 plates/m) compared with two commercial columns. The influence of water proportion, salt concentration, and pH in the mobile phase, and column temperature, on the retention of six polar compounds was examined. The retention mechanism was explored by three hydrophilic retention models, Tanaka test and linear solvation energy relationship analysis. For the analysis of sample dairy products (milk powder, milk, and yogurt), the stationary phase was operated in hydrophilic interaction chromatography mode without the addition of buffer salts, facilitating rapid and efficient detection and quantification of melamine. The LOD and LOQ are 0.04 mg⋅g-1 and 0.13 mg⋅g-1, respectively, and the recovery rate is 90.3 - 102.8 %. The zwitterionic stationary phase has the advantages of simple preparation, good method reproducibility, good selectivity and high precision.

Development of amphiphilic hypercrosslinked porous polymers for magnetic extraction of multiple environmental pollutants in water.

Under the principle of similar compatibility, researchers have developed various polarity extractants corresponding to a class of chemicals. Separating different polarities chemicals with one extractant effectively has become a novel research trend in separation science. Given the complexity of environmental sample matrices and the significant differences in polarity and solubility of various compounds, the introduction of hydrophilic groups to hydrophobic material skeletons can lead to sorbents with hydrophilic-lipophilic balance (HLB) property and thus improve their extraction performance for substances with different polarities. In this work, a hypercrosslinked polymer (HCPPz-TPB), designated as HLB, was synthesized by incorporating polar pyrazine and nonpolar triphenylbenzene molecules within each other. Subsequently, a core-shell magnetic composite material was obtained by encapsulating magnetic Fe3O4 nanoparticles in HCPPz-TPB. The material was applied as an adsorbent for magnetic solid phase extraction (MSPE) and combined with a high-performance liquid chromatography-photodiode array detector (HPLC-PDA) to enrich, separate, and detect seven polar contaminants in environmental water samples. The proposed approach, Fe3O4@SiO2@HCPPz-TPB-MSPE-HPLC-PDA, is characterized by its outstanding high sensitivity, low detection limits, wide linear range, and good reproducibility. The method demonstrated satisfactory linearity in the range of 0.05-2 µg mL-1 with R2 values between 0.9969 and 0.9997; the limits of detection (LOD) were observed to be within the range of 0.0019-0.016 µg L-1, and limits of quantification (LOQ) was observed to be within the range of 0.0064-0.054 µg L-1 range with good precision. The recoveries of the different contaminants in the environmental samples ranged from 83.61 to 116.46% (RSD≤10.56, n = 5). The new hydrophilic-lipophilic balance extractant is highly efficient, sensitive, and precise for extracting different polar pollutants. The findings demonstrate that the Fe3O4@SiO2@HCPPz-TPB display a remarkable affinity for multiple targets, driven by complex interactions including multi-stackings and hydrogen bonding as a sorbent. The synthesized Fe3O4@SiO2@HCPPz-TPB may be employed in diverse applications, including extraction, removal, and determination of diverse trace multi-target analytes in complex media.

A generic approach for the synthesis of dimer nanoclusters and asymmetric nanoassemblies.

Controlled assembly of nanoparticles into asymmetric configurations is of great interest due to their novel properties and promising applications. In this Article, we report a generic strategy for the synthesis of dimer nanoclusters and asymmetric nanoassemblies by using magnetic colloidal substrates, on which tailored surface modification and controlled physical confinement are applied. The modularity of our approach facilitates the fabrication of asymmetric nanostructures with varying sizes, shapes, compositions, surface chemistry, and surface hydrophobicity. Success in the syntheses sheds a light on the versatility of our strategy in rationally designing and synthesizing asymmetric nanostructures with tailored properties and functionalities.

Zwitterionic polymer-terminated porous silica stationary phases for highly selective separation in hydrophilic interaction chromatography.

We described two novel zwitterionic polymer-terminated porous silica stationary phases containing the same pyridinium cation and anions of different side chains (carboxylate and phosphonate groups) for use in hydrophilic interaction liquid chromatography (HILIC). These two novel columns were prepared by polymerizing 4-vinylpyridine and grafting it onto a silica surface, followed by quaternization reaction with 3-bromopropionic acid (Sil-VPC24) and (3-bromopropyl) phosphonic acid (Sil-VPP24), which possess positively charged pyridinium groups, and negatively charged carboxylate and phosphonate groups, respectively. The products obtained were verified through relevant characterization techniques such as elemental analysis, Fourier-transform infrared spectroscopy, thermogravimetric analysis, Zeta potential analysis, and Brunauer-Emmett-Teller analysis. The retention properties and mechanisms of different types of compounds (neutral, cationic, and anionic) on the two zwitterionic-modified silica stationary phases were studied by varying the buffer salt concentration and pH of the eluent. The separation of phenol and aromatic acids, disubstituted benzene isomers, sulfonamide drugs, as well as nucleosides/nucleobases were investigated on the two packed novel columns and a commercial zwitterionic column in identical HILIC mode, ensuring a thorough comparison between both novel columns and with a commercial standard. The results illustrated that various compounds could be separated up to various efficiencies based on the mechanism of hydrophilic interaction-based retention between the solutes and the two zwitterionic polymer stationary phases. The Sil-VPP24 column demonstrated the best separation performance out of the three, as well as flexible selectivity and excellent resolution. Both novel columns exhibited excellent stability and chromatographic repeatability for the separation of seven nucleosides and bases.

Assembly and photonic properties of superparamagnetic colloids in complex magnetic fields.

Interparticle magnetic dipole force has been found to drive the formation of dynamic superparamagnetic colloidal particle chains that can lead to the creation of photonic nanostructures with rapidly and reversibly tunable structural colors in the visible and near-infrared spectrum. Although most studies on magnetic assembly utilize simple permanent magnets or electromagnets, magnetic fields, in principle, can be more complex, allowing the localized modulation of assembly and subsequent creation of complex superstructures. To explore the potential applications of a magnetically tunable photonic system, we study the assembly of magnetic colloidal particles in the complex magnetic field produced by a nonideal linear Halbach array. We demonstrate that a horizontal magnetic field sandwiched between two vertical fields would allow one to change the orientation of the particle chains, producing a high contrast in color patterns. A phase transition of Fe(3)O(4)@SiO(2) particles from linear particle chains to three-dimensional crystals is found to be determined by the interplay of the magnetic dipole force and packing force, as well as the strong electrostatic force. While a color pattern with tunable structures and diffractions can be instantly created when the particles are assembled in the form of linear chains in the regions with vertical fields, the large field gradient in the horizontal orientation may destabilize the chain structures and produces a pattern of 3D crystals that compliments that of initial chain assemblies. Our study not only demonstrates the great potential of magnetically responsive photonic structures in the visual graphic applications such as signage and security documents but also points out the potential challenge in pattern stability when the particle assemblies are subjected to complex magnetic fields that often involve large field gradients.

Seeded growth of uniform Ag nanoplates with high aspect ratio and widely tunable surface plasmon bands.

Silver nanoplates with an extremely high aspect ratio (up to over 400) and a widely tunable surface plasmon resonance (SPR) band have been successfully synthesized by combining the concepts of selective ligand adhesion and seeded growth. Citrate ligands are used as the sole surfactant to effectively block overgrowth on the basal {111} facets and only allow growth in the lateral direction. By slowing down the reaction rate using Ag-citrate complex as precursor, the thin nature of Ag nanoplates is maintained with the edge length grown up to 4 µm, which ensures the high aspect ratio and the widely tunable SPR band. We also observe a size distribution focusing effect that helps to produce uniform nanoplates as well as narrow SPR bands over a wide range, which is important in many practical applications.

Magnetic assembly of nonmagnetic particles into photonic crystal structures.

We report the rapid formation of photonic crystal structures by assembly of uniform nonmagnetic colloidal particles in ferrofluids using external magnetic fields. Magnetic manipulation of nonmagnetic particles with size down to a few hundred nanometers, suitable building blocks for producing photonic crystals with band gaps located in the visible regime, has been difficult due to their weak magnetic dipole moment. Increasing the dipole moment of magnetic holes has been limited by the instability of ferrofluids toward aggregation at high concentration or under strong magnetic field. By taking advantage of the superior stability of highly surface-charged magnetite nanocrystal-based ferrofluids, in this paper we have been able to successfully assemble 185 nm nonmagnetic polymer beads into photonic crystal structures, from 1D chains to 3D assemblies as determined by the interplay of magnetic dipole force and packing force. In a strong magnetic field with large field gradient, 3D photonic crystals with high reflectance (83%) in the visible range can be rapidly produced within several minutes, making this general strategy promising for fast creation of large-area photonic crystals using nonmagnetic particles as building blocks.

A Molecular Shape Recognitive HPLC Stationary Phase Based on a Highly Ordered Amphiphilic Glutamide Molecular Gel.

Chiral glutamide-derived lipids form self-assembled fibrous molecular gels that can be used as HPLC organic phases. In this study, HPLC separation efficiency was improved through the addition of branched amphiphilic glutamide lipids to the side chains of a terminally immobilized flexible polymer backbone. Poly(4-vinylpyridine) with a trimethoxysilyl group at one end was grafted onto the surface of porous silica particles (Sil-VP15, polymerization degree = 15), and the pyridyl side chains were quaternized with a glutamide lipid having a bromide group (BrG). Elemental analysis indicated that the total amount of the organic phase of the prepared stationary phase (Sil-VPG15) was 38.0 wt%, and the quaternization degree of the pyridyl groups was determined to be 32.5%. Differential scanning calorimetric analysis of a methanol suspension of Sil-VPG15 indicated that the G moieties formed a highly ordered structure below the phase transition temperature even on the silica surface, and the ordered G moieties exhibited a gel-to-liquid crystalline phase transition. Compared with a commercially available octadecylated silica column, the Sil-VPG15 stationary phase showed high selectivity toward polycyclic aromatic hydrocarbons, and particularly excellent separations were obtained for geometrical and positional isomers. Sil-VPG15 also showed highly selective separation for phenol derivatives, and bio-related molecules containing phenolic groups such as steroids were successfully separated. These separation abilities are probably due to multiple interactions between the elutes and the highly ordered functional groups, such as the pyridinium and amide groups, on the highly ordered molecular gel having self-assembling G moieties.

Epitaxial growth of shape-controlled Bi2Te3-Te heterogeneous nanostructures.

A one-pot solution process has been devised to synthesize colloidal Bi2Te3-Te heterogeneous nanostructures (HNs) that comprise Bi2Te3 nanoplates and Te nanorods. By controlling the reaction kinetics, the reaction of TeO3(2-) and Bi(3+) in the presence of hydrazine first produces uniform Te nanorods and then grows Bi2Te3 nanoplates on the tips and surfaces of these Te nanorods, forming various shapes including "nails", "barbells", "syringes", and "accordions". The specific topological arrangement realized arises from the peculiar anisotropic reactivity of the first formed Te nanorods, whose tips are subsequently exploited to seed the heterogeneous nucleation of Bi2Te3 as enabled by the similar crystal structure and the small lattice mismatch between Te and Bi2Te3. Three important processes, heterogeneous nucleation of Bi2Te3 on the tips and/or surface of Te nanorods, homogeneous nucleation of Bi2Te3, and the direct reaction of a Bi precursor and Te nanorods to form hollow structures via the Kirkendall Effect, occur under various conditions. The manipulation of these processes provides a robust means for the fine shape control of Bi2Te3-Te HNs. It is envisioned that the tailored synthesis of Bi2Te3-Te HNs may promise unique opportunities for producing thermoelectric materials with greatly enhanced performance.

Mesoporous TiO(2) nanocrystal clusters for selective enrichment of phosphopeptides.

Protein phosphorylation plays a key role in most cellular processes. Studying phosphopeptides in complex biological samples has been a great challenge due to their low abundance as well as the coexistence of excessive amounts of salts or surfactants. In this work we demonstrate a general approach for selective separation of phosphopeptides using a class of novel mesoporous nanostructured materials. TiO(2) nanocrystals are first self-assembled into submicrometer clusters containing relatively uniform mesoscale pores and then stabilized by coating with a thin layer of silica. Calcination of the materials at high temperatures connects the neighboring nanocrystals together and enhances the mechanical stability of the clusters and at the same time removes the organic surfactants and makes the TiO(2) surface fully accessible to phosphopeptides. By coating the nanocrystal clusters with a layer of silica before calcination and removing it afterward through chemical etching, we have been able to make the cluster surface hydrophilic and negatively charged, thus enhancing the water dispersibility of the clusters and eventually their accessibility to phosphopeptides. The high selectivity and capacity of these mesoporous TiO(2) clusters have been demonstrated by effectively enriching phosphopeptides from digests of phosphoprotein (alpha- or beta-casein), protein mixtures of beta-casein and bovine serum albumin, milk, and human serum samples. We also demonstrate that the self-assembly process brings the flexibility of incorporation of multiple components, such as superparamagnetic nanocrystals, to further facilitate the peptide separation.

Magnetically recoverable core-shell nanocomposites with enhanced photocatalytic activity.

Core-shell structured Fe(3)O(4)/SiO(2)/TiO(2) nanocomposites with enhanced photocatalytic activity that are capable of fast magnetic separation have been successfully synthesized by combining two steps of a sol-gel process with calcination. The as-obtained core-shell structure is composed of a central magnetite core with a strong response to external fields, an interlayer of SiO(2), and an outer layer of TiO(2) nanocrystals with a tunable average size. The convenient control over the size and crystallinity of the TiO(2) nanocatalysts makes it possible to achieve higher photocatalytic efficiency than that of commercial photocatalyst Degussa P25. The photocatalytic activity increases as the thickness of the TiO(2) nanocrystal shell decreases. The presence of SiO(2) interlayer helps to enhance the photocatalytic efficiency of the TiO(2) nanocrystal shell as well as the chemical and thermal stability of Fe(3)O(4) core. In addition, the TiO(2) nanocrystals strongly adhere to the magnetic supports through covalent bonds. We demonstrate that this photocatalyst can be easily recycled by applying an external magnetic field while maintaining their photocatalytic activity during at least eighteen cycles of use.

One-pot synthesis and optical property of copper(I) sulfide nanodisks.

Copper(I) sulfide (Cu(2)S) nanodisks with controllable size and aspect ratio have been synthesized by using a one-pot colloidal process, in which no pre-prepared organometallic precursors are required. The reaction involves the injection of dodecanethiol into a hot solution containing copper salt, surfactants, and a high boiling-point organic solvent. Copper thiolate forms at the beginning of the reaction which effectively acts as a precursor whose decomposition leads to further nucleation and growth of Cu(2)S nanocrystals. The nanocrystals begin as small nanodots in the early stages of the reaction, gradually turning into nanodisks with aspect ratios (average disk diameter divided by thickness) up to 2.0, while the band gap of the nanocrystals decreases accordingly. As the growth of nanocrystals follows the monomer addition mechanism, the diameter, thickness, aspect ratio, and optical property of the Cu(2)S nanodisks can be tuned systematically by changing the reaction time, the amount of surfactants, and the concentration of the precursors. This synthesis provides a simple and highly reproducible method for the preparation of Cu(2)S nanocrystals that may find potential applications in the fabrication of photovoltaic devices.

Control over the permeation of silica nanoshells by surface-protected etching with water.

We demonstrate a water-based etching strategy for converting solid silica shells into porous ones with controllable permeability. It overcomes the challenges of the alkaline-based surface-protected etching process that we previously developed for the production of porous and hollow silica nanostructures. Mild etching around the boiling point of water partially breaks the imperfectly condensed silica network and forms soluble monosilicic acid, eventually producing mesoscale pores in the silica structures. With the surface protection from poly(vinyl pyrrolidone) (PVP), it is possible to maintain the overall shape of the silica structures while at the same time to create porosity inside. By using bulky PVP molecules which only protect the near-surface region, we are able to completely remove the interior silica and produce hollow particles. Because the etching is mild and controllable, this process is particularly useful for treating small silica particles or core-shell particles with very thin silica shells for which the alkaline-based etching method has been difficult to control. We demonstrated the precise control of the permeation of the chemical species through the porous silica shells by using a model reaction which involves the etching of Ag encapsulated inside Ag@SiO(2) by a halocarbon. It is expected that the water-based surface-protected etching method can be conveniently extended to the production of various porous silica shells containing functional materials whose diffusion to outside and/or reaction with outside species can be easily controlled.

Two copolymer-grafted silica stationary phases prepared by surface thiol-ene click reaction in deep eutectic solvents for hydrophilic interaction chromatography.

Two new copolymer-grafted silica stationary phases were prepared and employed in hydrophilic interaction chromatography (HILIC). 2-(Dimethylamino)ethyl methacrylate (DMAEMA) are copolymerized with itaconic acid (IA) and acrylic acid (AA) respectively, via thiol-ene click reaction on silica surface with deep eutectic solvents (DES) as new solvents. The obtained poly(DMAEMA-co-itaconic acid)-grafted silica (Sil-PDM-PIA) and poly(DMAEMA-co-acrylic acid)-grafted silica (Sil-PDM-PAA) were characterized by Fourier transform infrared spectroscopy, elemental analysis and solid-state 13C NMR spectra. Their hydrophilic interaction performances were evaluated by separating nucleosides, nucleobases, saccharides, and amino acids. Compared with previous reported poly(itaconic acid)-grafted silica (Sil-PIA) and poly(acrylic acid)-grafted silica (Sil-PAA) stationary phases, these two new copolymer-grafted silica performed higher selectivity and better separation for polar analytes in HILIC.

PDMS rubber as a single-source precursor for templated growth of silica nanotubes.

Polydimethylsiloxane (PDMS) rubber can be thermally decomposed in air to produce silica vapor species which can deposit on porous anodic aluminum oxide (AAO) templates to produce silica nanotubes with a smooth surface and highly controllable thickness.

Reconstruction of silver nanoplates by UV irradiation: tailored optical properties and enhanced stability.

The size and shape of it: The optical properties of Ag nanoplates can be precisely tuned in a wide range through a UV-light-induced reconstruction process in which the morphology of the nanoparticles is changed from thin triangular plates to thick round plates (see picture). This unconventional "backward tuning" strategy is a practical route to stable silver nanoplates that display a wide range of plasmon wavelengths.

Poly(itaconic acid)-grafted silica stationary phase prepared in deep eutectic solvents and its unique performance in hydrophilic interaction chromatography.

In this study, a new stationary phase based on poly(itaconic acid)-grafted silica (Sil-PIA) were synthesized in deep eutectic solvents (DESs) and characterized in detail. Itaconic acid was homopolymerized on silica via surface radical chain-transfer reaction using DESs as a new kind of green solvents. Sil-PIA were obtained and characterized by Fourier transform infrared spectroscopy, elemental analysis and scanning electron microscopy. The retention changes of nucleosides and nucleobases on the columns was studied under different chromatographic conditions including salt concentration, acetonitrile content, mobile phase pH, and column temperature. Compared with previous reported poly(acrylic acid)-grafted silica (Sil-PAA) stationary phase, Sil-PIA possesses shorter retention time but similar or higher selectivity for the separation of most polar compounds such as bases, nucleosides, amino acids, and saccharides in hydrophilic interaction chromatography. Most importantly, Sil-PIA presents very good performance at the separation of eleven ginsenosides using isocratic elution in hydrophilic chromatography.