Prediction of indicators of cow diet composition and authentication of feeding specifications of Protected Designation of Origin cheese using mid-infrared spectroscopy on milk.

The ability of mid-infrared spectroscopy (MIR) to predict indicators (1) of diet composition in dairy herds and (2) for the authentication of the cow feeding restrictions included in the specification of 2 Protected Designation of Origin (PDO) cheeses (Cantal and Laguiole) was tested on 7,607 bulk milk spectra from 1,355 farms located in the Massif Central area of France. For each milk sample, the corresponding cow diet composition data were obtained through on-farm surveys. The cow diet compositions varied largely (i.e., from full grazing for extensive farming systems to corn silage-based diets, which are typical of more intensive farming systems). Partial least square regression and discriminant analysis were used to predict the proportion of different feedstuffs in the cows' diets and to authenticate the cow feeding restrictions for the PDO cheese specifications, respectively. The groups for the discriminant analysis were created by dividing the data set according to the threshold of a specific feedstuff. They were issued based on the specifications of the restriction of the PDO cheese. The pasture proportion in the cows' diets was predicted by MIR with an coefficient of determination in external validation (R2V) = 0.81 and a standard error of prediction of 11.7% dry matter. Pasture + hay, corn silage, conserved herbage, fermented forage, and total herbage proportion in the cows' diets were predicted with a R2V >0.61 and a standard error of prediction <14.8. The discrimination models for pasture presence, pasture ≥50%, and pasture ≥57% in the cows' diets achieved an accuracy and specificity ≥90%. A sensitivity and precision ≥85% were also observed for the pasture proportion discrimination models, but both of these indexes decreased at increasing thresholds from 0 to 50, and 57% pasture in the cows' diets. An accuracy ≥80% was also observed for pasture + hay ≥72%, herbage ≥50%, pasture + hay ≥25%, absence of fermented herbage, absence of corn silage, and corn silage ≤30% in the cows' diets, but for several models, either the sensitivity or precision was lower than the accuracy. Models built on the simultaneous respect of all the criteria of the feeding restrictions of PDO cheese specifications achieved an accuracy, specificity, sensitivity, and precision >90%. Both the regression and discriminant MIR models for bulk milk can provide useful indicators of cow diet composition and PDO cheese specifications to producers and consumers (farmers, dairy plants).

Proof-of-concept Talbot-Lau x-ray interferometry with a high-intensity, high-repetition-rate, laser-driven K-alpha source.

Talbot-Lau x-ray interferometry is a grating-based phase-contrast technique, which enables measurement of refractive index changes in matter with micrometric spatial resolution. The technique has been established using a variety of hard x-ray sources, including synchrotron, free-electron lasers, and x-ray tubes, and could be used in the optical range for low-density plasmas. The tremendous development of table-top high-power lasers makes the use of high-intensity, laser-driven K-alpha sources appealing for Talbot-Lau interferometer applications in both high-energy-density plasma experiments and biological imaging. To this end, we present the first, to the best of our knowledge, feasibility study of Talbot-Lau phase-contrast imaging using a high-repetition-rate laser of moderate energy (100 mJ at a repetition rate of 10 Hz) to irradiate a copper backlighter foil. The results from up to 900 laser pulses were integrated to form interferometric images. A constant fringe contrast of 20% is demonstrated over 100 accumulations, while the signal-to-noise ratio continued to increase with the number of shots. Phase retrieval is demonstrated without prior ex-situ phase stepping. Instead, correlation matrices are used to compensate for the displacement between reference acquisition and the probing of a PMMA target rod. The steps for improved measurements with more energetic laser systems are discussed. The final results are in good agreement with the theoretically predicted outcomes, demonstrating the applicability of this diagnostic to a range of laser facilities for use across several disciplines.

Collimated Propagation of Fast Electron Beams Accelerated by High-Contrast Laser Pulses in Highly Resistive Shocked Carbon.

Collimated transport of ultrahigh intensity electron current was observed in cold and in laser-shocked vitreous carbon, in agreement with simulation predictions. The fast electron beams were created by coupling high-intensity and high-contrast laser pulses onto copper-coated cones drilled into the carbon samples. The guiding mechanism-observed only for times before the shock breakout at the inner cone tip-is due to self-generated resistive magnetic fields of ∼0.5-1 kT arising from the intense currents of fast electrons in vitreous carbon, by virtue of its specific high resistivity over the range of explored background temperatures. The spatial distribution of the electron beams, injected through the samples at different stages of compression, was characterized by side-on imaging of hard x-ray fluorescence.

Enhanced relativistic-electron-beam energy loss in warm dense aluminum.

Energy loss in the transport of a beam of relativistic electrons in warm dense aluminum is measured in the regime of ultrahigh electron beam current density over 2×10^{11} A/cm^{2} (time averaged). The samples are heated by shock compression. Comparing to undriven cold solid targets, the roles of the different initial resistivity and of the transient resistivity (upon target heating during electron transport) are directly observable in the experimental data, and are reproduced by a comprehensive set of simulations describing the hydrodynamics of the shock compression and electron beam generation and transport. We measured a 19% increase in electron resistive energy loss in warm dense compared to cold solid samples of identical areal mass.

Ultrafast short-range disordering of femtosecond-laser-heated warm dense aluminum.

We have probed, with time-resolved x-ray absorption near-edge spectroscopy (XANES), a femtosecond-laser-heated aluminum foil with fluences up to 1 J/cm2. The spectra reveal a loss of the short-range order in a few picoseconds. This time scale is compared with the electron-ion equilibration time, calculated with a two-temperature model. Hydrodynamic simulations shed light on complex features that affect the foil dynamics, including progressive density change from solid to liquid (∼10 ps). In this density range, quantum molecular dynamics simulations indicate that XANES is a relevant probe of the ionic temperature.

Relativistic high-current electron-beam stopping-power characterization in solids and plasmas: collisional versus resistive effects.

We present experimental and numerical results on intense-laser-pulse-produced fast electron beams transport through aluminum samples, either solid or compressed and heated by laser-induced planar shock propagation. Thanks to absolute K(α) yield measurements and its very good agreement with results from numerical simulations, we quantify the collisional and resistive fast electron stopping powers: for electron current densities of ≈ 8 × 10(10) A/cm(2) they reach 1.5 keV/µm and 0.8 keV/µm, respectively. For higher current densities up to 10(12)A/cm(2), numerical simulations show resistive and collisional energy losses at comparable levels. Analytical estimations predict the resistive stopping power will be kept on the level of 1 keV/µm for electron current densities of 10(14)A/cm(2), representative of the full-scale conditions in the fast ignition of inertially confined fusion targets.

Unraveling the solid-liquid-vapor phase transition dynamics at the atomic level with ultrafast x-ray absorption near-edge spectroscopy.

X-ray absorption near-edge spectroscopy (XANES) is a powerful probe of electronic and atomic structures in various media, ranging from molecules to condensed matter. We show how ultrafast time resolution opens new possibilities to investigate highly nonequilibrium states of matter including phase transitions. Based on a tabletop laser-plasma ultrafast x-ray source, we have performed a time-resolved (∼3 ps) XANES experiment that reveals the evolution of an aluminum foil at the atomic level, when undergoing ultrafast laser heating and ablation. X-ray absorption spectra highlight an ultrafast transition from the crystalline solid to the disordered liquid followed by a progressive transition of the delocalized valence electronic structure (metal) down to localized atomic orbitals (nonmetal-vapor), as the average distance between atoms increases.

Magnetically guided fast electrons in cylindrically compressed matter.

Fast electrons produced by a 10 ps, 160 J laser pulse through laser-compressed plastic cylinders are studied experimentally and numerically in the context of fast ignition. K(α)-emission images reveal a collimated or scattered electron beam depending on the initial density and the compression timing. A numerical transport model shows that implosion-driven electrical resistivity gradients induce strong magnetic fields able to guide the electrons. The good agreement with measured beam sizes provides the first experimental evidence for fast-electron magnetic collimation in laser-compressed matter.

Co-construction of a method for evaluating the intrinsic quality of bovine milk in relation to its fate.

There are time-tested assessments for the environmental and economic aspects of sustainability. Its societal aspect has mainly been approached through the assessment of animal welfare. However, the intrinsic quality of milk is seldom taken into account. We developed a participatory construction method for the overall assessment of intrinsic milk quality in its different dimensions (sensory, technological, nutritional and health), according to the fate of the raw milk. Two assessment models were developed, for semi-skimmed standardized ultra-high temperature (UHT) milk and for pressed uncooked non-standardized raw milk cheese. They were constructed by a participatory approach involving experts in the dairy sector with the aim to obtain a diagnostic tool that could be used in the field to help farmers to manage the quality of their milk (by prioritizing improvements on major problems). They were shaped from prerequisite specifications (limited costs and time of application, desire to obtain a transparent tool with all the steps kept visible) and current technical and scientific knowledge. They were based on indicators obtained from raw bulk tank milk analyses (30 for UHT milk and 50 for cheese assessments), which were then aggregated into criteria, principles, dimensions and overall intrinsic quality at farm level. The assessment models had parts in common, for example, same four dimensions, common indicators for health and nutritional dimensions. They also had process-specific features: units chosen, criteria, indicators and weightings in relation to the final product specifications. For instance, sensory and technological dimensions are more complex and preponderant in the cheese assessment (three principles for cheese vs one for UHT milk in both dimensions). Another example is the lack of microbial pathogens (as potential health risk for consumer) in the UHT milk assessment because of pasteurization. The assessment models then underwent a sensitivity analysis and an application in 30 farms in indoor and grazing periods to finally obtain overall UHT milk and cheese quality scores at a 1-year level. The tool was found to be applicable at farm level. However, we observed low overall quality scores with a narrow dispersion, characteristic of a severe evaluation. Even so, the assessment models showed up seasonal differences of the UHT milk and cheese quality at both overall and dimensional levels. In the light of new scientific knowledge and future quality objectives, these are adaptable to other dairy products allowing for their specific features.

Addition of pasture plant essential oil in milk: influence on chemical and sensory properties of milk and cheese.

The aim of this experiment was to study the effect of the addition, to milk, of an essential oil (EO) obtained from the hydrodistillation of plants collected from a mountain natural pasture on the milk and cheese sensory properties. The EO was mainly composed of terpenoid compounds (67 of the 95 compounds identified) as well as ketones, aldehydes, alcohols, esters, alkanes, and benzenic compounds. In milk, the addition of this EO at the concentration of 0.1 microL/L did not influence its sensory properties, whereas at 1.0 microL/L, sensory properties were modified. In cheeses, the effect of adding EO into milk was studied in an experimental dairy plant allowing the production of small Cantal-type cheeses (10 kg) in 3 vats processed in parallel. The control (C) vat contained 110 L of raw milk; in the other 2 vats, 0.1 microL/L (EO1) or 3.0 microL/L (EO30) of EO were added to 110 L of the same milk. Six replicates were performed. After 5 mo of ripening, chemical and sensory analyses were carried out on the cheeses, including determination of the volatile compounds by dynamic headspace combined with gas chromatography-mass spectrometry. The EO did not influence the sensory properties of the cheeses at the lower concentration (EO1). However, the EO30 cheeses had a more intense odor and aroma, both characterized as "mint/chlorophyll" and "thyme/oregano." These unusual odors and aromas originated directly from the EO added. In total, 152 compounds desorbing from cheese were found, of which 41 had been added with the EO; in contrast, 54 compounds of the EO were not recovered in the cheese. Few volatile compounds desorbing from cheeses, other than the added compounds, were affected by EO addition. Among them, 2-butanol, propanol, and 3-heptanone suggested a slight effect of the EO on lipid catabolism. The antimicrobial activity of terpenes is not or is only marginally involved in the explanation of the influence of the botanical composition of the meadows on the pressed cheeses sensory properties.

Experimental demonstration of an electromagnetic pulse mitigation concept for a laser driven proton source.

The targets that are used to produce high-energy protons with ultra-high intensity lasers generate a strong electromagnetic pulse (EMP). To mitigate that undesired side effect, we developed and tested a concept called the "birdhouse." It consists in confining the EMP field in a finite volume and in dissipating the trapped electromagnetic energy with an electric resistor. A prototype was tested at a 10 TW 50 fs laser facility. The recorded average EMP mitigation ratio is about 20 for frequencies from 100 MHz to 6 GHz. The EMP mitigation ratio attains the level of 50 in the frequency range of 1-2 GHz where microwave emission is maximal. We measured the intensity of proton emission in two directions: along the laser propagation direction and along the edge of the proton beam. We observed that the "birdhouse" induces a two-fold increase of the intensity in the center of the proton beam and a two-fold reduction of the intensity on its edge. We did not observe any modification of the proton beam normalized spectrum.

Erratum: Physics of giant electromagnetic pulse generation in short-pulse laser experiments [Phys. Rev. E 91, 043106 (2015)].

This corrects the article DOI: 10.1103/PhysRevE.91.043106.

Guiding of relativistic electron beams in dense matter by laser-driven magnetostatic fields.

Intense lasers interacting with dense targets accelerate relativistic electron beams, which transport part of the laser energy into the target depth. However, the overall laser-to-target energy coupling efficiency is impaired by the large divergence of the electron beam, intrinsic to the laser-plasma interaction. Here we demonstrate that an efficient guiding of MeV electrons with about 30 MA current in solid matter is obtained by imposing a laser-driven longitudinal magnetostatic field of 600 T. In the magnetized conditions the transported energy density and the peak background electron temperature at the 60-µm-thick target's rear surface rise by about a factor of five, as unfolded from benchmarked simulations. Such an improvement of energy-density flux through dense matter paves the ground for advances in laser-driven intense sources of energetic particles and radiation, driving matter to extreme temperatures, reaching states relevant for planetary or stellar science as yet inaccessible at the laboratory scale and achieving high-gain laser-driven thermonuclear fusion.

[Discontinuous warm cardioplegia in pediatric cardiac surgery: preliminary results]. / Cardioplégie chaude discontinue en chirurgie cardiaque pédiatrique: expérience initiale.

This article describes the use of warm cardioplegia in paediatric surgery. Warm blood enriched with potassium was injected every 15 minutes during aortic clamping in 770 operations. The efficacy and quality of this technique were assessed by the return of cardiac electrical activity, troponin I levels 12 hours after aortic clamping and the duration of postoperative ventilation in 3 groups of patients: ventricular septal defect under 6 months (N = 82), tetralogy of Fallot under one year (N = 55), simple transposition of the great arteries (N = 42). These results were compared retrospectively with those obtained using cold cardioplegia. The return of sinus rhythm was spontaneous in 99% of cases versus 77% with cold cardioplegia; the troponin I levels were under 10 ng/ml in 46% of cases versus 37% (NS). Patients operated for ventricular septal defect were ventilated 10 +/- 8 hours versus 13 +/- 10 hours with cold cardioplegia (p = 0.02). The children operated for tetralogy of Fallot were ventilated 8 +/- 4 hours versus 14 +/- 7 hours (p = 0.01) and those with simple transposition 56 +/- 71 hours versus 83 +/- 105 hours (NS). Warm cardioplegia, in the authors' experience, was associated with an improved postoperative course. In this group of 770 operations, 646 operated patients had a stay of less than two days in the intensive care unit.

Validation of modelled imaging plates sensitivity to 1-100 keV x-rays and spatial resolution characterisation for diagnostics for the "PETawatt Aquitaine Laser".

Thanks to their high dynamic range and ability to withstand electromagnetic pulse, imaging plates (IPs) are commonly used as passive detectors in laser-plasma experiments. In the framework of the development of the diagnostics for the Petawatt Aquitaine Laser facility, we present an absolute calibration and spatial resolution study of five different available types of IP (namely, MS-SR-TR-MP-ND) performed by using laser-induced K-shell X-rays emitted by a solid silver target irradiated by the laser ECLIPSE at CEntre Lasers Intenses et Applications. In addition, IP sensitivity measurements were performed with a 160 kV X-ray generator at CEA DAM DIF, where the absolute response of IP SR and TR has been calibrated to X-rays in the energy range 8-75 keV with uncertainties of about 15%. Finally, the response functions have been modeled in Monte Carlo GEANT4 simulations in order to reproduce experimental data. Simulations enable extrapolation of the IP response functions to photon energies from 1 keV to 1 GeV, of interest, e.g., for laser-driven radiography.

[Post-haemodilution anaemia in paediatric cardiac surgery: benefit of intravenous iron therapy]. / Intérêt du fer intraveineux dans les anémies induites par l'hémodilution en chirurgie cardiaque pédiatrique.

OBJECTIVE: Anaemia is the main complication following haemodilution in paediatric cardiac surgery. Iron oral therapy is ineffective to improve anaemia. The aim of this study is to assess the effect of a single dose of intravenous iron saccharate Venofer. STUDY DESIGN: Open, randomized. PATIENTS AND METHODS: 93 patients were randomized in two groups. The first one is the control group without iron supplementation and the second one received a 5 mg/kg injection of Venofer administered at day 1. Three biological factors were studied on day 1 and day 5 following surgery: haemoglobin, ferrritin and reticulocyte rate. Student test was used for statistical analysis of results. RESULTS: Age, weight, haemoglobin, ferritine and reticulocyte on day 1 were similar in both group (no significant difference). On day 5 ferritin was higher in the treated group 215+/-87 vs 101+/-55 mug/l in the non treated group (P<0.001). Reticulocyte rate was also higher in the treated group 3.25+/-1.16 vs 2.65+/-0.97% (P<0.005) in the untreated group. CONCLUSION: Postoperative systemic inflammation is probably the factor which impaired the effect of oral iron therapy. Parenteral iron may act by treating a functional iron deficiency and/or by increasing endogenous erythropoietin synthesis. Faster reversibility of anaemia following iron injection improves quality of the postoperative recovery.

Dynamic model of target charging by short laser pulse interactions.

A model providing an accurate estimate of the charge accumulation on the surface of a metallic target irradiated by a high-intensity laser pulse of fs-ps duration is proposed. The model is confirmed by detailed comparisons with specially designed experiments. Such a model is useful for understanding the electromagnetic pulse emission and the quasistatic magnetic field generation in laser-plasma interaction experiments.

Publisher's Note: Dynamic model of target charging by short laser pulse interactions [Phys. Rev. E 92, 043107 (2015)].

This corrects the article DOI: 10.1103/PhysRevE.92.043107.

Measurement of reflectivity of spherically bent crystals using Kα signal from hot electrons produced by laser-matter interaction.

In an experiment at the laser facility ECLIPSE of the CELIA laboratory, University of Bordeaux, we measure the reflectivity of spherically bent crystals that are commonly used to investigate the propagation of fast electrons through the Kα radiation they generate in matter. The experimental reflectivity compares well with predictions from a ray-tracing code that takes into account the specific geometry, although the crystals seem to suffer from aging problems.

Physics of giant electromagnetic pulse generation in short-pulse laser experiments.

In this paper we describe the physical processes that lead to the generation of giant electromagnetic pulses (GEMPs) at powerful laser facilities. Our study is based on experimental measurements of both the charging of a solid target irradiated by an ultra-short, ultra-intense laser and the detection of the electromagnetic emission in the GHz domain. An unambiguous correlation between the neutralization current in the target holder and the electromagnetic emission shows that the source of the GEMP is the remaining positive charge inside the target after the escape of fast electrons accelerated by the ultra-intense laser. A simple model for calculating this charge in the thick target case is presented. From this model and knowing the geometry of the target holder, it becomes possible to estimate the intensity and the dominant frequencies of the GEMP at any facility.