RESUMO
Passivating the electronic defects of metal halide perovskite is regarded as an effective way to improve the power conversion efficiency (PCE) of perovskite solar cells (PVSCs). Here, a series of dipeptide molecules with abundant âCâO, âOâ and âNH functional groups as defects passivators for perovskite films are employed. These dipeptide molecules are utilized to treat the surface of prototype methyl ammonium lead iodide (MAPbI3) films and the corresponding PVSCs exhibit enhanced photovoltaic performance and ambient stability, which can be ascribed to: 1) the âCâO and âOâ can interact with the undercoordinated Pb2+ ions and the âNH groups can form hydrogen bonds with the I- ions, passivating the defects in perovskite film and reducing charge recombination in PVSCs; 2) the long alkyl chain of dipeptide molecules increases the hydrophobicity of the perovskite surface and thus enhance the stability of PVSCs. The passivated MAPbI3-based PVSCs exhibit a champion PCE of 20.3% and retain 60% of the initial PCE after 1000 h. It is believed that the defects passivation engineering using polypeptide moleculars can be applied in other perovskite compositions for high device efficiency and stability.
RESUMO
A practical synthesis of valuable N-acyl anthranilic acids has been achieved via a silver-catalyzed imino-ketene generation from readily available anthranils and carboxylic acids. A wide range of carboxylic acids including sterically demanding aliphatic carboxylic acids, aromatic carboxylic acids, acrylic acids, and amino acids are compatible in this reaction. Moreover, this method can be used to modify drug molecules and natural products, such as ibuprofen, probenecid, and acetylglycine.
RESUMO
Current research of triplet-triplet annihilation upconversion (TTA-UC) faces difficulty such as overuse of organic solvents and quenching of excited triplet sensitizers by molecular oxygen. Herein, we propose an efficient and facile preparation strategy of TTA-UC microemulsion to overcome these issues. With simple device and short preparation process, air-stable TTA-UC with a high upconversion efficiency of 16.52% was achieved in microemulsion coassembled from TritonX114, tetrahydrofuran and upconverting chromophores (platinum octaethyl-porphyrin and 9,10-diphenylanthracene). This is comparable to the highest UC efficiency ever reported for TTA-UC microemulsion systems. The excellent UC performance of TX114-THF could be attributed to two perspectives. Firstly, small-size micelle accommodated chromophores up to high concentrations in organic phase, which promoted efficient molecular collision. Additionally, high absorbance at 532 nm ensured full use of excitation light, getting more long wavelength photons involved in the TTA-UC process. Moreover, air-stable TTA-UC also performed well in microemulsion with various surfactants, including nonionic surfactants (Tween 20, Tween 80, Triton X-110, Triton X-114), ionic surfactants (sodium dodecyl sulfate, cetyltrimethyl ammonium bromide) and block copolymers (pluronic F127, pluronic P123), through three conjectural assembly models according to the structural characteristics of surfactant molecules (concentrated, uncompacted and scattered). These discoveries could provide estimable reference for selection of surfactants in relevant fields of TTA-UC.
RESUMO
Organic photosensitizers (PSs) with aggregation-induced emission properties have great development potential in the integrated application of multi-mode diagnosis and treatment of photodynamic therapy (PDT) and photothermal therapy (PTT). However, preparing high-quality PSs with both optical and biological properties, high reactive oxygen species (ROS) and photothermal conversion ability are undoubtedly a great challenge. In this work, a series of pyridinium AIE PSs modified with benzophenone have been synthesized. A wide wavelength range of fluorescent materials was obtained by changing the conjugation and donor-acceptor strength. TPAPs5 has a significant advantage over similar compounds, and we have also identified the causes of high ROS generation and high photothermal conversion in terms of natural transition orbitals, excited state energy levels, ground-excited state configuration differences and recombination energy. Interestingly, migration of target sites was also found in biological imaging experiments, which also provided ideas for the design of double-targeted fluorescent probes. Therefore, the present work proposed an effective molecular design strategy for synergistic PDT and PTT therapy.
Assuntos
Neoplasias , Fotoquimioterapia , Humanos , Fármacos Fotossensibilizantes/farmacologia , Fotoquimioterapia/métodos , Espécies Reativas de Oxigênio , Neoplasias/tratamento farmacológicoRESUMO
Estrogen receptor α (ERα) promotes the growth and survival of ER-positive breast cancer (BC) cells. ER regulates ER expression target genes by directly binding to specific estrogen response elements, upon activation by estrogens. In this study, 106 proteins interacting with endogenous chromatin-bound ER in a BC cell line MCF7 were identified using the RIME method. The interactome data showed that the tripartite motif containing 28 (TRIM28) is the most significantly enriched ER-associated protein. This study provides evidence that TRIM28 expression improves ER transcriptional activity and promotes the BC cells proliferation, migration, and invasion of BC cells. The high expression of TRIM28 is associated with poor clinical outcomes in patients with ER-positive BC. Mechanistic experiments indicate that TRIM28 expression activates the AKT/GSK3ß pathway. To conclude, TRIM28 acts as a regulatory protein of ER and AKT signaling; therefore, it can be a target for the therapeutic interventions of BC.
RESUMO
Currently, most photoredox catalysis polymerization systems are limited by high excitation power, long polymerization time, or the requirement of electron donors due to the precise design of efficient photocatalysts still poses a great challenge. Herein, we propose a new approach: the creation of efficient photocatalysts having low ground state oxidation potentials and high excited state energy levels, along with through-space charge transfer (TSCT) induced intersystem crossing (ISC) properties. A cabazole-naphthalimide (NI) dyad (NI-1) characterized by long triplet excited state lifetime (τT=62â µs), satisfactory ISC efficiency (ΦΔ=54.3 %) and powerful reduction capacity [Singlet: E1/2 (PC+1/*PC)=-1.93â eV, Triplet: E1/2 (PC+1/*PC)=-0.84â eV] was obtained. An efficient and rapid polymerization (83 % conversion of 1â mM monomer in 30â s) was observed under the conditions of without electron donor, low excitation power (10â mW cm-2) and low catalyst (NI-1) loading (<50â µM). In contrast, the conversion rate was lower at 29 % when the reference catalyst (NI-4) was used for photopolymerization under the same conditions, demonstrating the advantage of the TSCT photocatalyst. Finally, the TSCT material was used as a photocatalyst in practical lithography for the first time, achieving pattern resolutions of up to 10â µm.
RESUMO
Multi-resonance thermally activated delayed fluorescence (MR-TADF) materials hold great promise for advanced high-resolution organic light-emitting diode (OLED) displays. However, persistent challenges, such as severe aggregation-caused quenching (ACQ) and slow spin-flip, hinder their optimal performance. We propose a synergetic steric-hindrance and excited-state modulation strategy for MR-TADF emitters, which is demonstrated by two blue MR-TADF emitters, IDAD-BNCz and TIDAD-BNCz, bearing sterically demanding 8,8-diphenyl-8H-indolo[3,2,1-de]acridine (IDAD) and 3,6-di-tert-butyl-8,8-diphenyl-8H-indolo[3,2,1-de]acridine (TIDAD), respectively. These rigid and bulky IDAD/TIDAD moieties, with appropriate electron-donating capabilities, not only effectively mitigate ACQ, ensuring efficient luminescence across a broad range of dopant concentrations, but also induce high-lying charge-transfer excited states that facilitate triplet-to-singlet spin-flip without causing undesired emission redshift or spectral broadening. Consequently, implementation of a high doping level of IDAD-BNCz resulted in highly efficient narrowband electroluminescence, featuring a remarkable full-width at half-maximum of 34â nm and record-setting external quantum efficiencies of 34.3 % and 31.8 % at maximum and 100â cd m-2, respectively. The combined steric and electronic effects arising from the steric-hindered donor introduction offer a compelling molecular design strategy to overcome critical challenges in MR-TADF emitters.
RESUMO
Polyethylene oxide (PEO)-based polymer electrolytes with good flexibility and viscoelasticity, low interfacial resistance, and fabricating cost have caught worldwide attention, but their practical application is still hampered by the instability at high voltages and the low ionic conductivity (10-8 to 10-6 â S cm-1 ). Herein, we rationally designed defects-abundant Ga2 O3 nanobricks as multifunctional fillers and constructed a PEO-based organic-inorganic electrolyte for lithium metal batteries. Due to the abundant O-defects feature of Ga2 O3 filler, this PEO-based composite electrolyte not only broadens electrochemical stability window (over 5.3â V versus Li/Li+ ) but also inâ situ forms a Li-Ga alloy and solid electrolyte interphase (SEI) film during the cycling process causing a rapid diffusion of Li+ ions. The as-prepared electrolyte has good interface compatibility with Li metal (without short-circuiting over 500â h at 0.2â mA cm-2 ) and possesses superior high ionic conductivity. The assembled all-solid-state LiFePO4 //Li cells attained an excellent cycling performance of 146â mAh g-1 over 100 cycles at 0.5â C. The XPS analysis reveals that Ga2 O3 nanobricks can form inâ situ a Li-Ga alloy layer at the polymer/anode interface. This work shed a light on designing high ionic conductivity lithium alloys in the composite electrolyte, which can improve the electrochemical properties of PEO-based polymer electrolytes.
RESUMO
High-contrast mechano-responsive luminescence (MRL) materials with mechano-induced emission enhancement properties are fascinating candidates but few, for applications in rewritable media and recording devices. Here, an interesting design strategy of "Y-shape" donor-acceptor (D-A) type molecules for high-contrast MRL materials was presented, based on substituted diphenylamine donor and planar acceptor. Interestingly, their D-A torsion angles are small in crystals but increased after ground, resulted in planar and twist intramolecular charge transfer (PICT and TICT) states, respectively. Therefore, high-contrast MRL switching between weak blue (450â nm) fluorescence and bright yellow (552â nm) thermally activated delayed fluorescence (TADF) can be achieved for compound TXDO (4,4'-dimethoxydiphenylamine donor), which photoluminescence quantum yield increased from 2.8 % to 54.7 % after ground. Most importantly, the two independent D-A conjugation dihedral angles are actually independent in the "Y-shape" molecules. Especially for compound TXDT (4,4'-di-tert-butyldiphenylamine donor), its crystal exhibited both PICT and TICT processes inside, resulted from the different dihedral angles of 11.8° and 35.5°, respectively. The TXDT crystal thus showed dual-peak emission, including both TICT fluorescence and PICT room-temperature phosphorescence. Therefore, this strategy of "Y-shape" D-A type molecules provide a new approach to design advanced luminescent materials with mechano-induced TADF feature, for high-contrast MRL and single-component white luminescence.
RESUMO
Tuning the redox potential of commonly available photocatalyst to improve the catalytic performance or expand its scope for challenging synthetic conversions is an ongoing demand in synthetic chemistry. Herein, the excited state properties and redox potential of commercially available [Ru(bpy)3 ]2+ photocatalyst were tuned by modifying the structure of the bipyridine ligands with electron-donating/withdrawing units. The visible-light-mediated photoredox phosphorylation of tertiary aliphatic amines was demonstrated under mild conditions. A series of cross-dehydrogenative coupling reactions were performed employing the RuII complexes as photocatalyst giving the corresponding α-aminophosphinoxides and α-aminophosphonates via carbon-phosphorus (C-P) bond formation.
RESUMO
An external photocatalyst-free benzylic C-H functionalization with fluorenones under visible-light irradiation has been achieved. This transformation provides an efficient synthetic approach to 9-benzylated fluorenols in ≤91% yield with 100% atom economy under mild conditions. Spectroscopic studies suggest that a reductive quenching of photoexcited fluorenones with toluene derivatives generates ketyl radicals and benzyl radicals, which undergo a cross-coupling to afford the desired fluorenols.
RESUMO
Different chemoselectivities of phenols and thiophenols were observed in a Tf2O-promoted C3 functionalization of simple anthranils. The reaction of phenols and anthranils gives 3-aryl anthranils via a C-C bond formation, whereas thiophenols afford 3-thio anthranils through a C-S bond formation. Both reactions have a broad substrate scope and tolerate a wide range of functional groups, affording the corresponding products with specific chemoselectivity.
RESUMO
Light-mediated therapies such as photodynamic therapy (PDT) are considered emerging cancer treatment strategies. However, there are still lots of defect with common photosensitizers (PSs), such as short emission wavelength, weak photostability, poor cell permeability, and low PDT efficiency. Therefore, it is very important to develop high-performance PSs. Recently, luminogens with aggregation-induced emission (AIE) characteristics and red/near-infrared (NIR) emissive have been reported as promising PSs for image-guided cancer therapy, due to them being able to prevent autofluorescence in physiological environments, their enhanced fluorescence in the aggregated state, and generation of reactive oxygen species (ROS). Herein, we developed PSs named TBTCPM and MTBTCPM with donor-acceptor (D-A) structures, strong red/NIR, excellent targeting specificities to good cell permeability, and high photostability. Interestingly, both of them can efficiently generate ROS under white light irradiation and possess excellent killing effect on cancer cells. This study, thus, not only demonstrates applications in cell image-guided PDT cancer therapy performances but also provides strategy for construction of AIEgens with long emission wavelengths.
Assuntos
Neoplasias , Fotoquimioterapia , Humanos , Fármacos Fotossensibilizantes/farmacologia , Fármacos Fotossensibilizantes/química , Fármacos Fotossensibilizantes/uso terapêutico , Espécies Reativas de Oxigênio , Neoplasias/tratamento farmacológico , LuzRESUMO
The design of efficient heavy atom-free triplet photosensitizers (PSs) based on through bond charge transfer (TBCT) features is a formidable challenge due to the criteria of orthogonal donor-acceptor geometry. Herein, we propose using parallel (face-to-face) conformation carbazole-bodipy donor-acceptor dyads (BCZ-1 and BCZ-2) featuring through space intramolecular charge transfer (TSCT) process as efficient triplet PS. Efficient intersystem crossing (ΦΔ =61 %) and long-lived triplet excited state (τT =186â µs) were observed in the TSCT dyad BCZ-1 compared to BCZ-3 (ΦΔ =0.4 %), the dyad involving TBCT, demonstrating the superiority of the TSCT approach over conventional donor-acceptor system. Moreover, the transient absorption study revealed that TSCT dyads have a faster charge separation and slower intersystem crossing process induced by charge recombination compared to TBCT dyad. A long-lived charge-separated state (CSS) was observed in the BCZ-1 (τCSS =24â ns). For the first time, the TSCT dyad was explored for the triplet-triplet annihilation upconversion, and a high upconversion quantum yield of 11 % was observed. Our results demonstrate a new avenue for designing efficient PSs and open up exciting opportunities for future research in this field.
RESUMO
The development of photoinduced luminescent radicals with dynamic emission color is still challenging. Herein we report a novel molecular radical system (TBIQ) that shows photo-controllable luminescence, leading to a wide range of ratiometric color changes via light excitation. The conjugated skeleton of TBIQ is decorated with steric-demanding tertiary butyl groups that enable appropriate intermolecular interaction to make dynamic intermolecular coupling possible for controllable behaviors. We reveal that the helicenic pseudo-planar conformation of TBIQ experiences a planarization process after light excitation, leading to more compactly stacked supermolecules and thus generating radicals via intermolecular charge transfer. The photo-controllable luminescent radical system is employed for a high-level information encryption application. This study may offer unique insight into molecular dynamic motion for optical manufacturing and broaden the scope of smart-responsive materials for advanced applications.
RESUMO
Adequately harvesting all excitons in a single molecule and inhibiting exciton losses caused by intermolecular interactions are two important factors for achieving high efficiencies thermally activated delayed fluorescence (TADF). One potential approach for optimizing these is to tune alignment of various excited state energy levels by using different doping concentrations. Unfortunately, emission efficiencies of most TADF emitters decrease rapidly with concentrations which limits the window for energy level tunning. In this work, by introducing a spiro group to increase steric hindrance of a TADF emitter (BPPXZ) with a phenoxazine and a dibenzo[a,c]phenazine, emission efficiency of the resulting molecule (BPSPXZ) is much less affected by concentration increase. This enables exploitation of the concentration effects to tune energy levels of its excited states for obtaining simultaneously small singlet-triplet energy offset and large spin-orbital coupling, leading to high-efficiency reverse intersystem crossing. With these merits, organic light-emitting diodes (OLEDs) using the BPSPXZ emitter from 5 to 60 wt% doping can all deliver EQE of over 20%. More importantly, record-high EQEs of 33.4% and 15.8% are respectively achieved in the optimized and nondoped conditions. This work proposes a strategy for developing red TADF emitters by optimizing the intermolecular interaction and energy level alignments to facilitate exciton utilization over wide doping concentrations.
RESUMO
Six novel benzimidazole-based D-π-A compounds 4 a-4 f were concisely synthesized by attaching different donor/acceptor units to the skeleton of 1,3-bis(1H-benzimidazol-2-yl)benzene on its 5-position through an ethynyl link. Due to the twisted conformation and effective conjugation structure, these dual-state emission (DSE) molecules show intense and multifarious photoluminescence, and their fluorescence quantum yields in solution and solid state can be up to 96.16 and 69.82 %, respectively. Especially, for excellent photostability, obvious solvatofluorochromic and extraordinary wide range of solvent compatibility, DSE molecule 4 a is a multifunctional fluorescent probe for the visual detection of nitroaromatic compounds (NACs) with the limit of detection as low as 10-7 M. The quenching mechanism has been proved as the results of photoinduced electron transfer and fluorescence resonance energy transfer processes. Importantly, probe 4 a can sensitively detect NACs not only in real water samples, but also on 4 a-coated strips and 4 a@PBAT thin films.
Assuntos
Transferência Ressonante de Energia de Fluorescência , Corantes Fluorescentes , Transporte de Elétrons , Conformação Molecular , SolventesRESUMO
We prepared an orthogonal compact electron-donor (phenoxazine, PXZ)-acceptor (naphthalimide, NI) dyad (NI-PXZ), to study the photophysics of the thermally-activated delayed fluorescence (TADF), which has a luminescence lifetime of 16.4â ns (99.2 %)/17.0â µs (0.80 %). A weak charge transfer (CT) absorption band was observed for the dyad, indicating non-negligible electronic coupling between the donor and acceptor at the ground state. Femtosecond transient absorption spectroscopy shows a fast charge separation (CS) (ca. 2.02â¼2.72â ps), the majority of the singlet CS state is short-lived, especially in polar solvents (τCR = 10.3â ps in acetonitrile, vs. 1.83â ns in toluene, 7.81â ns in n-hexane). Nanosecond transient absorption spectroscopy detects a long-lived transient species in n-hexane, which is with a mixed triplet local excited state (3 LE) and charge separated state (3 CS), the lifetime is 15.4â µs. In polar solvents, such as tetrahydrofuran and acetonitrile, a neat 3 CS state was observed, whose lifetimes are 226â ns and 142â ns, respectively. Time-resolved electron paramagnetic resonance (TREPR) spectra indicate the existence of strongly spin exchanged 3 LE/3 CT states, with the effective zero field splitting (ZFS) |D| and |E| parameters of 1484â MHz and 109â MHz, respectively, much smaller than that of the native 3 NI state (2475 and 135â MHz). It is rare but solid experimental evidence that a closely-lying 3 LE state is crucial for occurrence of TADF and this 3 LE state is an essential intermediate state to facilitate reverse intersystem crossing in TADF systems.
RESUMO
The regioselective hydroamination of unactivated alkenes is a long-standing challenge in organic synthesis. Herein, we report a NiH-catalyzed proximal-selective hydroamination of unactivated alkenes with 8-aminoquinoline (AQ) as a bidentate auxiliary and anthranils as aminating reagents. A wide range of primary aryl amines bearing an ortho-carbonyl group were installed in both terminal and internal unactivated alkenes, delivering a variety of valuable ß- and γ-amino acid building blocks, respectively, with excellent regiocontrol. The utility of this transformation was further demonstrated by the conversion of the multifunctionalized aryl amines into useful N-heterocycles.
Assuntos
Alcenos , Aminas , Alcenos/química , Aminação , Catálise , Aminas/químicaRESUMO
A photocatalyst- and additive-free visible-light-induced α-C(sp3)-H phosphinylation of unactivated ethers involving a C-O bond cleavage with molecular oxygen as the sole oxidant at room temperature has been achieved. This method provides a sustainable access to α-hydroxyphosphine oxides in up to 88% yield with good functional group compatibility under mild and neutral conditions (34 examples). Moreover, the subsequent two-step conversion of the resulting dihydroxy diarylphosphine oxides afforded α-phosphinylated cyclic ethers in good overall yields (10 examples).