RESUMO
Due to its topological protection, the magnetic skyrmion has been intensively studied for both fundamental aspects and spintronics applications. However, despite recent advancements in skyrmion research, the deterministic creation of isolated skyrmions in a generic perpendicularly magnetized film is still one of the most essential and challenging techniques. Here, we present a method to create magnetic skyrmions in typical perpendicular magnetic anisotropy (PMA) films by applying a magnetic field pulse and a method to determine the magnitude of the required external magnetic fields. Furthermore, to demonstrate the usefulness of this result for future skyrmion research, we also experimentally study the PMA dependence on the minimum size of skyrmions. Although field-driven skyrmion generation is unsuitable for device application, this result can provide an easier approach for obtaining isolated skyrmions, making skyrmion-based research more accessible.
RESUMO
Antiferromagnetic spin waves have been predicted to offer substantial functionalities for magnonic applications due to the existence of two distinct polarizations, the right-handed and left-handed modes, as well as their ultrafast dynamics. However, experimental investigations have been hampered by the field-immunity of antiferromagnets. Ferrimagnets have been shown to be an alternative platform to study antiferromagnetic spin dynamics. Here we investigate thermally excited spin waves in ferrimagnets across the magnetization compensation and angular momentum compensation temperatures using Brillouin light scattering. Our results show that right-handed and left-handed modes intersect at the angular momentum compensation temperature where pure antiferromagnetic spin waves are expected. A field-induced shift of the mode-crossing point from the angular momentum compensation temperature and the gyromagnetic reversal reveal hitherto unrecognized properties of ferrimagnetic dynamics. We also provide a theoretical understanding of our experimental results. Our work demonstrates important aspects of the physics of ferrimagnetic spin waves and opens up the attractive possibility of ferrimagnet-based magnonic devices.
RESUMO
An amendment to this paper has been published and can be accessed via a link at the top of the paper.
RESUMO
Coupling of spin and heat currents enables the spin Nernst effect, the thermal generation of spin currents in nonmagnets that have strong spin-orbit interaction. Analogous to the spin Hall effect that electrically generates spin currents and associated electrical spin-orbit torques (SOTs), the spin Nernst effect can exert thermal SOTs on an adjacent magnetic layer and control the magnetization direction. Here, the thermal SOT caused by the spin Nernst effect is experimentally demonstrated in W/CoFeB/MgO structures. It is found that an in-plane temperature gradient across the sample generates a magnetic torque and modulates the switching field of the perpendicularly magnetized CoFeB. The W thickness dependence suggests that the torque originates mainly from thermal spin currents induced in W. Moreover, the thermal SOT reduces the critical current for SOT-induced magnetization switching, demonstrating that it can be utilized to control the magnetization in spintronic devices.
RESUMO
The possibility that non-magnetic materials such as carbon could exhibit a novel type of s-p electron magnetism has attracted much attention over the years, not least because such magnetic order is predicted to be stable at high temperatures. It has been demonstrated that atomic-scale structural defects of graphene can host unpaired spins, but it remains unclear under what conditions long-range magnetic order can emerge from such defect-bound magnetic moments. Here we propose that, in contrast to random defect distributions, atomic-scale engineering of graphene edges with specific crystallographic orientation--comprising edge atoms from only one sub-lattice of the bipartite graphene lattice--can give rise to a robust magnetic order. We use a nanofabrication technique based on scanning tunnelling microscopy to define graphene nanoribbons with nanometre precision and well-defined crystallographic edge orientations. Although so-called 'armchair' ribbons display quantum confinement gaps, ribbons with the 'zigzag' edge structure that are narrower than 7 nanometres exhibit an electronic bandgap of about 0.2-0.3 electronvolts, which can be identified as a signature of interaction-induced spin ordering along their edges. Moreover, upon increasing the ribbon width, a semiconductor-to-metal transition is revealed, indicating the switching of the magnetic coupling between opposite ribbon edges from the antiferromagnetic to the ferromagnetic configuration. We found that the magnetic order on graphene edges of controlled zigzag orientation can be stable even at room temperature, raising hopes of graphene-based spintronic devices operating under ambient conditions.
RESUMO
An overview is given of the soft X-ray photon-in/photon-out instruments on the free-electron laser (FEL) beamline at the Pohang Accelerator Laboratory, and selected commissioning results are presented. The FEL beamline provides a photon energy of 270 to 1200â eV, with an energy bandwidth of 0.44%, an energy of 200â µJ per pulse and a pulse width of <50â fs (full width at half-maximum). The estimated total time resolution between optical laser and X-ray pulses is <100â fs. Instruments for X-ray absorption spectroscopy (XAS) and resonant inelastic X-ray scattering (RIXS) have been set up. X-ray magnetic circular dichroism spectra for a Co/Pt multilayer film and RIXS spectra for α-Fe2O3(100) have been obtained and the performance of the spectrometer has been evaluated.
RESUMO
Among two-dimensional (2D) layered van der Waals materials, ferromagnetic 2D materials can be useful for compact low-power spintronic applications. One promising candidate material is Fe3GeTe2 (FGT), which has a strong perpendicular magnetic anisotropy and relatively high Curie temperature. In this study, we confirmed that an oxide layer (O-FGT) naturally forms on top of exfoliated FGT and that an antiferromagnetic coupling (AFC) exists between FGT and O-FGT layers. From a first-principles calculation, oxide formation at the interface of each layer induces an AFC between the layers. An AFC causes a tailed hysteresis loop, where two-magnetization reversal curves are included, and a negative remanence magnetization at a certain temperature range.
RESUMO
Magnetic van der Waals (vdW) materials have emerged as promising candidates for spintronics applications, especially after the recent discovery of intrinsic ferromagnetism in monolayer vdW materials. There has been a critical need for tunable ferromagnetic vdW materials beyond room temperature. Here, we report a real-space imaging study of itinerant ferromagnet Fe3GeTe2 and the enhancement of its Curie temperature well above ambient temperature. We find that the magnetic long-range order in Fe3GeTe2 is characterized by an unconventional out-of-plane stripe-domain phase. In Fe3GeTe2 microstructures patterned by a focused ion beam, the out-of-plane stripe domain phase undergoes a surprising transition at 230 K to an in-plane vortex phase that persists beyond room temperature. The discovery of tunable ferromagnetism in Fe3GeTe2 materials opens up vast opportunities for utilizing vdW magnets in room-temperature spintronics devices.
RESUMO
The chemical and mechanical stability of hexagonal boron nitride (h-BN) thin films and their compatibility with other free-standing two-dimensional (2D) crystals to form van der Waals heterostructures make the h-BN-2D tunnel junction an intriguing experimental platform not only for the engineering of specific device functionalities but also for the promotion of quantum measurement capabilities. Here, we exploit the h-BN-graphene tunnel junction to directly probe the electronic structures of single-layer and bilayer graphene in the presence and the absence of external magnetic fields with unprecedented high signal-to-noise ratios. At a zero magnetic field, we identify the tunneling spectra related to the charge neutrality point and the opening of the electric-field-induced bilayer energy gap. In the quantum Hall regime, the quantization of 2D electron gas into Landau levels (LL) is seen as early as 0.2 T, and as many as 30 well-separated LL tunneling conductance oscillations are observed for both electron- and hole-doped regions. Our device simulations successfully reproduce the experimental observations. Additionally, we extract the relative permittivity of three-to-five layer h-BN and find that the screening capability of thin h-BN films is as much as 60% weaker than bulk h-BN.
RESUMO
The adherence of graphene to various crystalline substrates often leads to a periodic out-of-plane modulation of its atomic structure due to the lattice mismatch. While, in principle, convex (protrusion) and concave (depression) superlattice geometries are nearly equivalent, convex superlattices have predominantly been observed for graphene on various metal surfaces. Here we report the STM observation of a graphene superlattice with concave (nanomesh) morphology on Au(111). DFT and molecular dynamics simulations confirm the nanomesh nature of the graphene superlattice on Au(111) and also reveal its potential origin as a surface reconstruction, consisting of the imprinting of the nanomesh morphology into the Au(111) surface. This unusual surface reconstruction can be attributed to the particularly large mobility of the Au atoms on Au(111) surfaces and most probably plays an important role in stabilizing the concave graphene superlattice. We report the simultaneous observation of both convex and concave graphene superlattices on herringbone reconstructed Au(111) excluding the contrast inversion as the origin of the observed concave morphology. The observed graphene nanomesh superlattice can provide an intriguing nanoscale template for self-assembled structures and nanoparticles that cannot be stabilized on other surfaces.
RESUMO
The properties of graphene are strongly affected by metal adsorbates and clusters on graphene. Here, we study the effect of a thin layer of platinum (Pt) metal on exfoliated single, bi- and trilayer graphene and on chemical vapor deposition-grown single-layer graphene by using Raman spectroscopy and transport measurements. The Raman spectra and transport measurements show that Pt affects the structure as well as the electronic properties of graphene. The shift of peak frequencies, intensities and widths of the Raman bands were analyzed after the deposition of Pt with different thicknesses (1, 3, 5 nm) on the graphene. The shifts in the G and 2D peak positions of the Raman spectra indicate the n-type doping effect by the Pt metal. The doping effect was also confirmed by gate-voltage dependent resistivity measurements. The doping effect by the Pt metal is stable under ambient conditions, and the doping intensity increases with the increasing Pt deposition without inducing a severe degradation of the charge carrier mobility.
RESUMO
The recent discovery of room-temperature ferromagnetism in 2D van der Waals (vdW) materials, such as Fe3GaTe2 (FGaT), has garnered significant interest in offering a robust platform for 2D spintronic applications. Various fundamental operations essential for the realization of 2D spintronics devices are experimentally confirmed using these materials at room temperature, such as current-induced magnetization switching or tunneling magnetoresistance. Nevertheless, the potential applications of magnetic skyrmions in FGaT systems at room temperature remain unexplored. In this work, the current-induced generation of magnetic skyrmions in FGaT flakes employing high-resolution magnetic transmission soft X-ray microscopy is introduced, supported by a feasible mechanism based on thermal effects. Furthermore, direct observation of the current-induced magnetic skyrmion motion at room temperature in FGaT flakes is presented with ultra-low threshold current density. This work highlights the potential of FGaT as a foundation for room-temperature-operating 2D skyrmion device applications.
RESUMO
Platinum ditelluride (1T-PtTe2) is a two-dimensional (2D) topological semimetal with a distinctive band structure and flexibility of van der Waals integration as a promising candidate for future electronics and spintronics. Although the synthesis of large-scale, uniform, and highly crystalline films of 2D semimetals system is a prerequisite for device application, the synthetic methods meeting these criteria are still lacking. Here, we introduce an approach to synthesize highly oriented 2D topological semimetal PtTe2 using a thermally assisted conversion called tellurization, which is a cost-efficient method compared to the other epitaxial deposition methods. We demonstrate that achieving highly crystalline 1T-PtTe2 using tellurization is not dependent on epitaxy but rather relies on two critical factors: (i) the crystallinity of the predeposited platinum (Pt) film and (ii) the surface coverage ratio of the Pt film considering lateral lattice expansion during transformation. By optimizing the surface coverage ratio of the epitaxial Pt film, we successfully obtained 2 in. wafer-scale uniformity without in-plane misalignment between antiparallelly oriented domains. The electronic band structure of 2D topological PtTe2 is clearly resolved in momentum space, and we observed an interesting 6-fold gapped Dirac cone at the Fermi surface. Furthermore, ultrahigh electrical conductivity down to â¼3.8 nm, which is consistent with that of single crystal PtTe2, was observed, proving its ultralow defect density.
RESUMO
Controlling the direction of magnetization with an electric current, rather than a magnetic field, is a powerful technique in spintronics. Spin-orbit torque, which generates an effective magnetic field from the injected current, is a promising method for this purpose. Here we show an approach for quantifying the magnitude of spin-orbit torque from a single magnetic image. To achieve this, we deposited two concentric electrodes on top of the magnetic sample to flow a radial current. By counterbalancing the current effect with an external magnetic field, we can create a stable circular magnetization state. We measure the magnitude of spin-orbit torque from the stable radius, providing a new tool for characterizing spin-orbit torque.
RESUMO
Field-effect transistor-based biosensors have gained increasing interest due to their reactive surface to external stimuli and the adaptive feedback required for advanced sensing platforms in biohybrid neural interfaces. However, complex probing methods for surface functionalization remain a challenge that limits the industrial implementation of such devices. Herein, a simple, label-free biosensor based on molybdenum oxide (MoO3) with dopamine-regulated plasticity is demonstrated. Dopamine oxidation facilitated locally at the channel surface initiates a charge transfer mechanism between the molecule and the oxide, altering the channel conductance and successfully emulating the tunable synaptic weight by neurotransmitter activity. The oxygen level of the channel is shown to heavily affect the device's electrochemical properties, shifting from a nonreactive metallic characteristic to highly responsive semiconducting behavior. Controllable responsivity is achieved by optimizing the channel's dimension, which allows the devices to operate in wide ranges of dopamine concentration, from 100 nM to sub-mM levels, with excellent selectivity compared with K+, Na+, and Ca2+.
RESUMO
The paradigm shift of information carriers from charge to spin has long been awaited in modern electronics. The invention of the spin-information transistor is expected to be an essential building block for the future development of spintronics. Here, a proof-of-concept experiment of a magnetic skyrmion transistor working at room temperature, which has never been demonstrated experimentally, is introduced. With the spatially uniform control of magnetic anisotropy, the shape and topology of a skyrmion when passing the controlled area can be maintained. The findings will open a new route toward the design and realization of skyrmion-based spintronic devices in the near future.
RESUMO
A scaling law elucidates the universality in nature, presiding over many physical phenomena which seem unrelated. Thus, exploring the universality class of scaling law in a particular system enlightens its physical nature in relevance to other systems and sometimes unearths an unprecedented new dynamic phase. Here, the dynamics of weakly driven magnetic skyrmions are investigated, and its scaling law is compared with the motion of a magnetic domain wall (DW) creep. This study finds that the skyrmion does not follow the scaling law of the DW creep in 2D space but instead shows a hopping behavior similar to that of the particle-like DW in 1D confinement. In addition, the hopping law satisfies even when a topological charge of the skyrmion is removed. Therefore, the distinct scaling behavior between the magnetic skyrmion and the DW stems from a general principle beyond the topological charge. This study demonstrates that the hopping behavior of skyrmions originates from the bottleneck process induced by DW segments with diverging collective lengths, which is inevitable in any closed-shape spin structure in 2D. This work reveals that the structural topology of magnetic texture determines the universality class of its weakly driven motion, which is distinguished from the universality class of magnetic DW creep.
RESUMO
The various spiral structures that exist in nature inspire humanity because of their morphological beauty, and spiral structures are used in various fields, including architecture, engineering, and art. Spiral structures have their own winding directions, and in most spirals, it is difficult to reverse the predetermined winding direction. Here, we show that a rotating spiral exists in magnetic systems for which the winding direction can be easily reversed. A magnetization vector basically has a spiral motion combining a precessional and a damping motion. The application of these basic mechanics to a system composed of magnetic vectors that are affected by a radial current and the Dzyaloshinskii-Moriya interaction forms the rotating magnetic spiral. The winding direction of the magnetic spiral has its own stability, but the direction can be changed using an external magnetic field. This magnetic spiral has a finite size, and the magnetic domain is destroyed at the edge of the spiral, which can create magnetic skyrmions.
RESUMO
The magnetic skyrmion is a topologically protected spin texture that has attracted much attention as a promising information carrier because of its distinct features of suitability for high-density storage, low power consumption, and stability. One of the skyrmion devices proposed so far is the skyrmion racetrack memory, which is the skyrmion version of the domain-wall racetrack memory. For application in devices, skyrmion racetrack memory requires electrical generation, deletion, and displacement of isolated skyrmions. Despite the progress in experimental demonstrations of skyrmion generation, deletion, and displacement, these three operations have yet to be realized in one device. Here, a route for generating and deleting isolated skyrmion-bubbles through vertical current injection with an explanation of its microscopic origin is presented. By combining the proposed skyrmion-bubble generation/deletion method with the spin-orbit-torque-driven skyrmion shift, a proof-of-concept experimental demonstration of the skyrmion racetrack memory operation in a three-terminal device structure is provided.
RESUMO
Magnetic domain wall (DW) motion in perpendicularly magnetized materials is drawing increased attention due to the prospect of new type of information storage devices, such as racetrack memory. To augment the functionalities of DW motion-based devices, it is essential to improve controllability over the DW motion. Other than electric current, which is known to induce unidirectional shifting of a train of DWs, an application of in-plane magnetic field also enables the control of DW dynamics by rotating the DW magnetization and consequently modulating the inherited chiral DW structure. Applying an external bias field, however, is not a viable approach for the miniaturization of the devices as the external field acts globally. Here, the programmable exchange-coupled DW motion in the antiferromagnet (AFM)/ferromagnet (FM) system is demonstrated, where the role of an external in-plane field is replaced by the exchange bias field from AFM layer, enabling the external field-free modulations of DW motions. Interestingly, the direction of the exchange bias field can also be reconfigured by simply injecting spin currents through the device, enabling electrical and programmable operations of the device. Furthermore, the result inspires a prototype DW motion-based device based on the AFM/FM heterostructure, that could be easily integrated in logic devices.