Trophic Transfer and Accumulation of Multiwalled Carbon Nanotubes in the Presence of Copper Ions in Daphnia magna and Fathead Minnow (Pimephales promelas).

The increase in use of nanomaterials such as multiwalled carbon nanotubes (MWCNTs) presents a need to study their interactions with the environment. Trophic transfer was measured between Daphnia magna and Pimephales promelas (fathead minnow, FHM) exposed to MWCNTs with different outer diameter (OD) sizes (MWCNT1 = 8-15 nm OD and MWCNT2 = 20-30 nm OD) in the presence and absence of copper. Pristine FHM were fed D. magna, previously exposed for 3 d to MWCNT1 or MWCNT2 (0.1 mg/L) and copper (0.01 mg/L), for 7 d. D. magna bioaccumulated less MWCNT1 (0.02 µg/g) than MWCNT2 (0.06 µg/g), whereas FHM accumulated more MWCNT1 (0.81 µg/g) than MWCNT2 (0.04 µg/g). In the presence of copper, MWCNT bioaccumulation showed an opposite trend. Mostly MWCNT1 (0.03 µg/g) bioaccumulated in D. magna, however less MWCNT1 (0.21 µg/g) than MWCNT2 (0.32 µg/g) bioaccumulated in FHM. Bioaccumulation factors were higher for MWCNT1s than MWCNT2. However, an opposite trend was observed when copper was added. Plasma metallothionein-2 was measured among treatments; however concentrations were not statistically different from the control. This study demonstrates that trophic transfer of MWCNTs is possible in the aquatic environment and further exploration with mixtures can strengthen the understanding of MWCNT environmental behavior.

Graphene reflux: improving the yield of liquid-exfoliated nanosheets through repeated separation techniques.

Scalable production of graphene through liquid-phase exfoliation has been plagued by low yields. Although several recent studies have attempted to improve graphene exfoliation technology, the problem of separating colloidal nanosheets from unexfoliated parent material has received far less attention. Here we demonstrate a scalable method for improving nanosheet yield through a facile washing process. By probing the sedimentation of liquid-phase exfoliated slurries of graphene nanosheets and parent material, we found that a portion of exfoliated graphene is entrapped in the sediment, but can be recovered by repeatedly washing the slurry of nanosheet and parent material with additional solvent. We found this process to significantly increase the overall yield of graphene (graphene/parent material) and recover a roughly constant proportion of graphene with each wash. The cumulative amount of graphene recovered is only a function of total solvent volume. Moreover, we found this technique to be applicable to other types of nanosheets such as boron nitride nanosheets.

Vertical transport and plant uptake of nanoparticles in a soil mesocosm experiment.

BACKGROUND: Agricultural soils represent a potential sink for increasing amounts of different nanomaterials that nowadays inevitably enter the environment. Knowledge on the relation between their actual exposure concentrations and biological effects on crops and symbiotic organisms is therefore of high importance. In this part of a joint companion study, we describe the vertical translocation as well as plant uptake of three different titanium dioxide (nano-)particles (TiO2 NPs) and multi-walled carbon nanotubes (MWCNTs) within a pot experiment with homogenously spiked natural agricultural soil and two plant species (red clover and wheat). RESULTS: TiO2 NPs exhibited limited mobility from soil to leachates and did not induce significant titanium uptake into both plant species, although average concentrations were doubled from 4 to 8 mg/kg Ti at the highest exposures. While the mobility of MWCNTs in soil was limited as well, microwave-induced heating suggested MWCNT-plant uptake independent of the exposure concentration. CONCLUSIONS: Quantification of actual exposure concentrations with a series of analytical methods confirmed nominal ones in soil mesocosms with red clover and wheat and pointed to low mobility and limited plant uptake of titanium dioxide nanoparticles and carbon nanotubes.

Tailored Crumpling and Unfolding of Spray-Dried Pristine Graphene and Graphene Oxide Sheets.

For the first time, pristine graphene can be controllably crumpled and unfolded. The mechanism for graphene is radically different than that observed for graphene oxide; a multifaced crumpled, dimpled particle morphology is seen for pristine graphene in contrast to the wrinkled, compressed surface of graphene oxide particles, showing that surface chemistry dictates nanosheet interactions during the crumpling process. The process demonstrated here utilizes a spray-drying technique to produce droplets of aqueous graphene dispersions and induce crumpling through rapid droplet evaporation. For the first time, the gradual dimensional transition of 2D graphene nanosheets to a 3D crumpled morphology in droplets is directly observed; this is imaged by a novel sample collection device inside the spray dryer itself. The degree of folding can be tailored by altering the capillary forces on the dispersed sheets during evaporation. It is also shown that the morphology of redispersed crumpled graphene powder can be controlled by solvent selection. This process is scalable, with the ability to rapidly process graphene dispersions into powders suitable for a variety of engineering applications.

Ultralow percolation threshold in aerogel and cryogel templated composites.

We demonstrate a novel concept for preparing percolating composites with ultralow filler content by utilizing nanofiller-loaded aerogel and cryogels as a conductive template. This concept is investigated for several porous systems, including resorcinol-formaldehyde (RF), silica, and polyacrylamide (PAM) gels, and both graphene and carbon nanotubes are utilized as nanofiller. In each case, a stable, aqueous nanofiller dispersion is mixed with a sol-gel precursor and polymerized to form a hydrogel, which can then be converted to an aerogel by critical point drying or cryogel by freeze-drying. Epoxy resin is infused into the pores of the gels by capillary action without disrupting the monolithic structure. We show that conductive graphene/epoxy composites are formed with a very low graphene loading; a percolation threshold as low as 0.012 vol % is obtained for graphene-RF cryogel/epoxy composite. This is the lowest reported threshold of any graphene-based nanocomposites. Similar values are achieved in other aerogel and nanofiller systems, which demonstrates the versatility of this method.

Multiwalled Carbon Nanotubes Dramatically Affect the Fruit Metabolome of Exposed Tomato Plants.

Here, we reported that multiwalled carbon nanotubes (MWCNT) added to hydroponics system can enhance fruit production of exposed tomato plants. We quantified the exact amount of MWCNT accumulated inside of fruits collected by MWCNT-exposed plants using an advanced microwave induced heating technique (MIH). We found that absorption of MWCNT by tomato fruits significantly affected total fruit metabolome as was confirmed by LC-MS. Our data highlight the importance of comprehensive toxicological risk assessment of plants contaminated with carbon nanomaterials.

Photodegradation of dispersants in colloidal suspensions of pristine graphene.

We demonstrate that UV degradation can remove polymeric dispersants from the surface of colloidal pristine graphene. In particular, we investigated the irradiation of polyvinylpyrrolidone (PVP)-dispersed graphene in water; this polymer has been established as a versatile nanosheet dispersant for a range of solvents, and it undergoes photo-oxidative degradation when exposed to UV light. We find that the molecular weight of PVP decreases with irradiation time and subsequently desorbs from the graphene surface. This causes gradual destabilization of graphene and agglomeration in water. The amount of adsorbed PVP decreases by approximately 45% after 4 h of irradiation in comparison with the non-irradiated dispersion. At this point, the majority of the stable graphene nanosheets flocculate, likely because of insufficient surface coverage as indicated by thermogravimetric analysis. Graphene aggregates were characterized as a function of irradiation time by optical microscopy, UV-vis spectroscopy, Raman spectroscopy, and conductivity measurements; the data suggest that the agglomerates maintain a graphene-like (rather than graphite-like) structure. The effect is also observed for another graphene dispersant (sapogenin), which suggests that our findings can be generalized to the broader class of photodegradable dispersants.

Challenges in Liquid-Phase Exfoliation, Processing, and Assembly of Pristine Graphene.

Recent developments in the exfoliation, dispersion, and processing of pristine graphene (i.e., non-oxidized graphene) are described. General metrics are outlined that can be used to assess the quality and processability of various "graphene" products, as well as metrics that determine the potential for industrial scale-up. The pristine graphene production process is categorized from a chemical engineering point of view with three key steps: i) pretreatment, ii) exfoliation, and iii) separation. How pristine graphene colloidal stability is distinct from the exfoliation step and is dependent upon graphene interactions with solvents and dispersants are extensively reviewed. Finally, the challenges and opportunities of using pristine graphene as nanofillers in polymer composites, as well as as building blocks for macrostructure assemblies are summarized in the context of large-scale production.

Determination of uptake, accumulation, and stress effects in corn (Zea mays L.) grown in single-wall carbon nanotube contaminated soil.

Single-wall carbon nanotubes (SWNTs) are projected to increase in usage across many industries. Two studies were conducted using Zea L. (corn) seeds exposed to SWNT spiked soil for 40 d. In Study 1, corn was exposed to various SWNT concentrations (0, 10, and 100 mg/kg) with different functionalities (non-functionalized, OH-functionalized, or surfactant stabilized). A microwave induced heating method was used to determine SWNTs accumulated mostly in roots (0-24 µg/g), with minimal accumulation in stems and leaves (2-10 µg/g) with a limit of detection at 0.1 µg/g. Uptake was not functional group dependent. In Study 2, corn was exposed to 10 mg/kg SWNTs (non-functionalized or COOH-functionalized) under optimally grown or water deficit conditions. Plant physiological stress was determined by the measurement of photosynthetic rate throughout Study 2. No significant differences were seen between control and SWNT treatments. Considering the amount of SWNTs accumulated in corn roots, further studies are needed to address the potential for SWNTs to enter root crop species (i.e., carrots), which could present a significant pathway for human dietary exposure.

Adsorption and removal of graphene dispersants.

We demonstrate three different techniques (dialysis, vacuum filtration, and spray drying) for removal of dispersants from liquid-exfoliated graphene. We evaluate these techniques for elimination of dispersants from both the bulk liquid phase and from the graphene surface. Thermogravimetric analysis (TGA) confirms dispersant removal by these treatments. Vacuum filtration (driving by convective mass transfer) is the most effective method of dispersant removal, regardless of the type of dispersant, removing up to ∼95 wt.% of the polymeric dispersant with only ∼7.4 wt.% decrease in graphene content. Dialysis also removes a significant fraction (∼70 wt.% for polymeric dispersants) of un-adsorbed dispersants without disturbing the dispersion quality. Spray drying produces re-dispersible, crumpled powder samples and eliminates much of the unabsorbed dispersants. We also show that there is no rapid desorption of dispersants from the graphene surface. In addition, electrical conductivity measurements demonstrate conductivities one order of magnitude lower for graphene drop-cast films (where excess dispersants are present) than for vacuum filtered films, confirming poor inter-sheet connectivity when excess dispersants are present.

Determination of multi-walled carbon nanotube bioaccumulation in earthworms measured by a microwave-based detection technique.

Reliable quantification techniques for carbon nanotubes (CNTs) are limited. In this study, a new procedure was developed for quantifying multi-walled carbon nanotubes (MWNTs) in earthworms (Eisenia fetida) based on freeze drying and microwave-induced heating. Specifically, earthworms were first processed into a powder by freeze drying. Then, samples were measured by utilizing 10 s exposure to 30 W microwave power. This method showed the potential to quantitatively measure MWNTs in earthworms at low concentrations (~0.1 µg in 20 mg of earthworm). Also, a simple MWNT bioaccumulation study in earthworms indicated a low bioaccumulation factor of 0.015±0.004. With an appropriate sample processing method and instrumental parameters (power and exposure time), this technique has the potential to quantify MWNTs in a variety of sample types (plants, earthworms, human blood, etc.).

Rheology and morphology of pristine graphene/polyacrylamide gels.

Enhancement of toughness in nanomaterial-based hydrogels is a critical metric for many of their engineering applications. Pristine graphene-polyacrylamide (PAM) hydrogels are synthesized via in situ polymerization of acrylamide monomer in PAM-stabilized graphene dispersion. In-situ polymerization leads to the uniform dispersion of the graphene sheets in the hydrogel. The graphene sheets interact with the elastic chains of the hydrogel through physisorption and permit gelation in the absence of any chemical cross-linker. This study represents the first report of pristine graphene as a physical cross-linker in a hydrogel. The properties of the graphene-polymer hydrogel are characterized by rheological measurements and compressive tests, revealing an increase in the storage modulus and toughness of the hydrogels compared to the chemically cross-linked PAM analogues. The physically cross-linked graphene hydrogels also exhibit self-healing properties. These hydrogels prove to be efficient precursors for graphene-PAM aerogels with enhanced electrical conductivity and thermal stability.

Dispersions of non-covalently functionalized graphene with minimal stabilizer.

We demonstrate that functionalized pyrene derivatives effectively stabilize single- and few-layer graphene flakes in aqueous dispersions. The graphene/stabilizer yield obtained by this method is exceptionally high relative to conventional nanomaterial stabilizers such as surfactants or polymers. The mechanism of stabilization by pyrene derivatives is investigated by studying the effects of various parameters on dispersed graphene concentration and stability; these parameters include stabilizer concentration, initial graphite concentration, solution pH, and type and number of functional groups and counterions. The effectiveness of the pyrene derivatives is pH-tunable, as measured by zeta potential, and is also a function of the number of functional groups, the electronegativity of the functional group, the counterion, the relative polarity between stabilizer and solvent, and the distance from the functional group to the basal plane. Even if the dispersion is destabilized by extreme pH or lyophilization, the graphene does not aggregate because the stabilizer remains adsorbed on the surface. These dispersions also show promise for applications in graphene/polymer nanocomposites (examined in this paper), organic solar cells, conductive films, and inkjet-printed electronic devices.