Discovery, structure and mechanism of a tetraether lipid synthase.

Archaea synthesize isoprenoid-based ether-linked membrane lipids, which enable them to withstand extreme environmental conditions, such as high temperatures, high salinity, and low or high pH values1-5. In some archaea, such as Methanocaldococcus jannaschii, these lipids are further modified by forming carbon-carbon bonds between the termini of two lipid tails within one glycerophospholipid to generate the macrocyclic archaeol or forming two carbon-carbon bonds between the termini of two lipid tails from two glycerophospholipids to generate the macrocycle glycerol dibiphytanyl glycerol tetraether (GDGT)1,2. GDGT contains two 40-carbon lipid chains (biphytanyl chains) that span both leaflets of the membrane, providing enhanced stability to extreme conditions. How these specialized lipids are formed has puzzled scientists for decades. The reaction necessitates the coupling of two completely inert sp3-hybridized carbon centres, which, to our knowledge, has not been observed in nature. Here we show that the gene product of mj0619 from M. jannaschii, which encodes a radical S-adenosylmethionine enzyme, is responsible for biphytanyl chain formation during synthesis of both the macrocyclic archaeol and GDGT membrane lipids6. Structures of the enzyme show the presence of four metallocofactors: three [Fe4S4] clusters and one mononuclear rubredoxin-like iron ion. In vitro mechanistic studies show that Csp3-Csp3 bond formation takes place on fully saturated archaeal lipid substrates and involves an intermediate bond between the substrate carbon and a sulfur of one of the [Fe4S4] clusters. Our results not only establish the biosynthetic route for tetraether formation but also improve the use of GDGT in GDGT-based paleoclimatology indices7-10.

Enzymatic Fluoromethylation Enabled by the S-Adenosylmethionine Analog Te-Adenosyl-L-(fluoromethyl)homotellurocysteine.

Fluoromethyl, difluoromethyl, and trifluoromethyl groups are present in numerous pharmaceuticals and agrochemicals, where they play critical roles in the efficacy and metabolic stability of these molecules. Strategies for late-stage incorporation of fluorine-containing atoms in molecules have become an important area of organic and medicinal chemistry as well as synthetic biology. Herein, we describe the synthesis and use of Te-adenosyl-L-(fluoromethyl)homotellurocysteine (FMeTeSAM), a novel and biologically relevant fluoromethylating agent. FMeTeSAM is structurally and chemically related to the universal cellular methyl donor S-adenosyl-L-methionine (SAM) and supports the robust transfer of fluoromethyl groups to oxygen, nitrogen, sulfur, and some carbon nucleophiles. FMeTeSAM is also used to fluoromethylate precursors to oxaline and daunorubicin, two complex natural products that exhibit antitumor properties.

Synthesis and polymerization of renewable 1,3-cyclohexadiene using metathesis, isomerization, and cascade reactions with late-metal catalysts.

Synthesis and subsequent polymerization of renewable 1,3-cyclohexadiene (1,3-CHD) from plant oils is reported via metathesis and isomerization reactions. The metathesis reaction required no plant oil purification, minimal catalyst loading, no organic solvents, and simple product recovery by distillation. After treating soybean oil with a ruthenium metathesis catalyst, the resulting 1,4-cyclohexadiene (1,4-CHD) was isomerized with RuHCl(CO)(PPh3)3. The isomerization reaction was conducted for 1 h in neat 1,4-CHD with [1,4-CHD]/[RuHCl(CO)(PPh3)3] ratios as high as 5000. The isomerization and subsequent polymerization of the renewable 1,3-CHD was examined as a two-step sequence and as a one-step cascade reaction. The polymerization was catalyzed with nickel(II)acetylacetonate/methaluminoxane in neat monomer, hydrogenated d-limonene, and toluene. The resulting polymers were characterized by FTIR, DSC, and TGA.

Characterization of RimO, a new member of the methylthiotransferase subclass of the radical SAM superfamily.

RimO, encoded by the yliG gene in Escherichia coli, has been recently identified in vivo as the enzyme responsible for the attachment of a methylthio group on the beta-carbon of Asp88 of the small ribosomal protein S12 [Anton, B. P., Saleh, L., Benner, J. S., Raleigh, E. A., Kasif, S., and Roberts, R. J. (2008) Proc. Natl. Acad. Sci. U.S.A. 105, 1826-1831]. To date, it is the only enzyme known to catalyze methylthiolation of a protein substrate; the four other naturally occurring methylthio modifications have been observed on tRNA. All members of the methylthiotransferase (MTTase) family, to which RimO belongs, have been shown to contain the canonical CxxxCxxC motif in their primary structures that is typical of the radical S-adenosylmethionine (SAM) family of proteins. MiaB, the only characterized MTTase, and the enzyme experimentally shown to be responsible for methylthiolation of N(6)-isopentenyladenosine of tRNA in E. coli and Thermotoga maritima, has been demonstrated to harbor two distinct [4Fe-4S] clusters. Herein, we report in vitro biochemical and spectroscopic characterization of RimO. We show by analytical and spectroscopic methods that RimO, overproduced in E. coli in the presence of iron-sulfur cluster biosynthesis proteins from Azotobacter vinelandii, contains one [4Fe-4S](2+) cluster. Reconstitution of this form of RimO (RimO(rcn)) with (57)Fe and sodium sulfide results in a protein that contains two [4Fe-4S](2+) clusters, similar to MiaB. We also show by mass spectrometry that RimO(rcn) catalyzes the attachment of a methylthio group to a peptide substrate analogue that mimics the loop structure bearing aspartyl 88 of the S12 ribosomal protein from E. coli. Kinetic analysis of this reaction shows that the activity of RimO(rcn) in the presence of the substrate analogue does not support a complete turnover. We discuss the possible requirement for an assembled ribosome for fully active RimO in vitro. Our findings are consistent with those of other enzymes that catalyze sulfur insertion, such as biotin synthase, lipoyl synthase, and MiaB.

Incorporation of nonmethyl branches by isoprenoid-like logic: multiple beta-alkylation events in the biosynthesis of myxovirescin A1.

Several polyketide secondary metabolites are predicted to undergo isoprenoid-like beta-alkylations during biosynthesis. One such secondary metabolite is myxovirescin A1, produced by Myxococcus xanthus. Myxovirescin is of special interest in that it appears to undergo two distinct beta-alkylations. Additionally, the myxovirescin biosynthetic gene cluster lacks tandem thiolation domains required in the synthesis of other beta-branched secondary metabolites. To probe the origins of the beta-branches in myxovirescin, we heterologously overexpressed the proteins predicted to be responsible for myxovirescin beta-alkylation and reconstituted their activities in vitro on model substrates. Our results confirm that myxovirescin undergoes two isoprenoid-like beta-alkylations during its biosynthesis, including an unprecedented beta-ethylation. The study of its biosynthesis should shed light on the scope and requirements for isoprenoid-like biosynthetic logic in a polyketide context.

Diglycerol-based polyesters: melt polymerization with hydrophobic anhydrides.

The melt polymerization of diglycerol with bicyclic anhydride monomers derived from a naturally occurring monoterpene provides an avenue for polyesters with a high degree of sustainability. The hydrophobic anhydrides are synthesized at ambient temperature via a solvent-free Diels-Alder reaction of α-phellandrene with maleic anhydride. Subsequent melt polymerizations with tetra-functional diglycerol are effective under a range of [diglycerol]/[anhydride] ratios. The hydrophobicity of α-phellandrene directly impacts the swelling behavior of the resulting polyesters. The low E factors (<2), large amount of bio-based content (>75%), ambient temperature monomer synthesis, and polymer degradability represent key factors in the design of these sustainable polyesters.

A biodegradable thermoset polymer made by esterification of citric acid and glycerol.

A new biomaterial, a degradable thermoset polymer, was made from simple, economical, biocompatable monomers without the need for a catalyst. Glycerol and citric acid, nontoxic and renewable reagents, were crosslinked by a melt polymerization reaction at temperatures from 90 to 150°C. Consistent with a condensation reaction, water was determined to be the primary byproduct. The amount of crosslinking was controlled by the reaction conditions, including temperature, reaction time, and ratio between glycerol and citric acid. Also, the amount of crosslinking was inversely proportional to the rate of degradation. As a proof-of-principle for drug delivery applications, gentamicin, an antibiotic, was incorporated into the polymer with preliminary evaluations of antimicrobial activity. The polymers incorporating gentamicin had significantly better bacteria clearing of Staphylococcus aureus compared to non-gentamicin gels for up to 9 days.

The activity of Escherichia coli cyclopropane fatty acid synthase depends on the presence of bicarbonate.

Cyclopropane fatty acid (CFA) synthases catalyze the formation of cyclopropane rings on isolated and unactivated olefinic bonds within various fatty acids; the methylene carbon is derived from the activated methyl group of (S)-adenosylmethionine. The E. coli enzyme is the prototype for this class of enzymes, which include the cyclopropane mycolic acid (CMA) synthases, which are potential targets for the design of antituberculosis agents. Crystal structures of several CMA synthases have recently been solved, and electron density attributed to a bicarbonate ion was found in or near the active site. Because a functional assay for CMA synthases has not been developed, the relevance of the bicarbonate ion has not been established. CFA synthase is 30-35% identical to the CMA synthases that have been analyzed structurally, suggesting that the mechanisms of these enzymes are conserved. In this work, we show that indeed the activity of CFA synthase requires bicarbonate, and that it is inhibited by borate, a planar trigonal molecule that mimics the structure of bicarbonate. We also show that substitutions of the conserved amino acids that act as ligands to the bicarbonate ion based on the structure of CMA synthases result in drastic losses in the activity of the protein.

Expression, purification, and physical characterization of Escherichia coli lipoyl(octanoyl)transferase.

Lipoic acid is a sulfur-containing 8-carbon fatty acid that functions as a central cofactor in multienzyme complexes that are involved in the oxidative decarboxylation of glycine and several alpha-keto acids. In its functional form, it is bound covalently in an amide linkage to the epsilon-amino group of a conserved lysine residue of the "lipoyl bearing subunit," resulting in a long "swinging arm" that shuttles intermediates among the requisite active sites. In Escherichia coli and many other organisms, the lipoyl cofactor can be synthesized endogenously. The 8-carbon fatty-acyl chain is constructed via the type II fatty acid biosynthetic pathway as an appendage to the acyl carrier protein (ACP). Lipoyl(octanoyl)transferase (LipB) transfers the octanoyl chain from ACP to the target lysine acceptor, generating the substrate for lipoyl synthase (LS), which subsequently catalyzes insertion of both sulfur atoms into the C-6 and C-8 positions of the octanoyl chain. In this study, we present a three-step isolation procedure that results in a 14-fold purification of LipB to >95% homogeneity in an overall yield of 25%. We also show that the protein catalyzes the transfer of the octanoyl group from octanoyl-ACP to apo-H protein, which is the lipoyl bearing subunit of the glycine cleavage system. The specific activity of the purified protein is 0.541 U mg(-1), indicating a turnover number of approximately 0.2 s(-1), and the apparent Km values for octanoyl-ACP and apo-H protein are 10.2+/-4.4 and 13.2+/-2.9 microM, respectively.

Insight into the polar reactivity of the onium chalcogen analogues of S-adenosyl-L-methionine.

S-Adenosyl-L-methionine (AdoMet) is one of Nature's most diverse metabolites, used not only in a large number of biological reactions but amenable to several different modes of reactivity. The types of transformations in which it is involved include decarboxylation, electrophilic addition to any of the three carbons bonded to the central sulfur atom, proton removal at carbons adjacent to the sulfonium, and reductive cleavage to generate 5'-deoxyadenosyl 5'-radical intermediates. At physiological pH and temperature, AdoMet is subject to three spontaneous degradation pathways, the first of which is racemization of the chiral sulfonium group, which takes place in a pH-independent manner. The two remaining pathways are pH-dependent and include (1) intramolecular attack of the alpha-carboxylate group onto the gamma-carbon, affording L-homoserine lactone (HSL) and 5'-methylthioadenosine (MTA), and (2) deprotonation at C-5', initiating a cascade that results in formation of adenine and S-ribosylmethionine. Herein, we describe pH-dependent stability studies of AdoMet and its selenium and tellurium analogues, Se-adenosyl-L-selenomethionine and Te-adenosyl-L-telluromethionine (SeAdoMet and TeAdoMet, respectively), at 37 degrees C and constant ionic strength, which we use as a probe of their relative intrinsic reactivities. We find that with AdoMet intramolecular nucleophilic attack to afford HSL and MTA exhibits a pH-rate profile having two titratable groups with apparent pK(a) values of 1.2 +/- 0.4 and 8.2 +/- 0.05 and displaying first-order rate constants of <0.7 x 10(-6) s(-1) at pH values less than 0.5, approximately 3 x 10(-6) s(-1) at pH values between 2 and 7, and approximately 15 x 10(-6) s(-1) at pH values greater than 9. Degradation via deprotonation at C-5' follows a pH-rate profile having one titratable group with an apparent pK(a) value of approximately 11.5. The selenium analogue decays significantly faster via intramolecular nucleophilic attack, also exhibiting a pH-rate profile with two titratable groups with pK(a) values of approximately 0.86 and 8.0 +/- 0.1 with first-order rate constants of <7 x 10(-6) s(-1) at pH values less than 0.9, approximately 32 x 10(-6) s(-1) at pH values between 2 and 7, and approximately 170 x 10(-6) s(-1) at pH values greater than 9. Degradation via deprotonation at C-5' proceeds with one titratable group displaying an apparent pK(a) value of approximately 14.1. Unexpectedly, TeAdoMet did not decay at an observable rate via either of these two pathways. Last, enzymatically synthesized AdoMet was found to racemize at rates that were consistent with earlier studies (Hoffman, J. L. (1986) Biochemistry 25, 4444-4449); however, SeAdoMet and TeAdoMet did not racemize at detectable rates. In the accompanying paper, we use the information obtained in these model studies to probe the mechanism of cyclopropane fatty acid synthase via use of the onium chalcogens of AdoMet as methyl donors.