Effect of Chinese medicinal herbal residues compost on tomato and Chinese cabbage plants: Assessment on phytopathogenic effect and nutrients uptake.

Chinese medicinal herbal residues (CMHRs) are known for their antipathogenic properties due to the presence of bioactive compounds. Hence, CMHRs could be used as a potential resource to produce biofertilizer with antipathogenic properties for agricultural applications. In this study, a novel approach was used by utilizing the waste-derived biofertilizer, i.e., CMHRs compost (CMHRC) as a nutrient supplier as well as an organic bioagent against Alternaria solani (A. solani) and Fusarium oxysporum (F. oxysporum) on tomato (Lycopersicon esculentum) and Chinese cabbage (Brassica rapa subsp. Chinensis) plants. The experiments were conducted under greenhouse conditions using locally collected acidic soil wherein 2%, 5% and 10% CMHRC (dry weight) along with 5% food waste compost were used as treatments. In addition, only soil and soil with phytopathogens were used as control treatments. The results suggested that amending the compost into acidic soil significantly increased the pH to a neutral level along with enhanced uptake of nutrients. Among all the treatments, 5% CMHRs compost addition increased the tomato plant biomass production to 4.9 g/pot (dry weight) compared to 2.2 g/pot in control. A similar trend was observed in Chinese cabbage plants and the improved plant biomass production could be attributed to the combined effect of strong nutrient absorption ability by healthy roots and enhanced nutrient supply. At 5% CMHRC application rate, the nitrogen uptake by tomato and Chinese cabbage plants increased by 78% and 62%, respectively, whereas phosphorous uptake increased by 75% and 25%, respectively. The reduction in A. solani by 48% and F. oxysporum by 54% in the post-harvested soil of 5% CMHRC treatment against the control demonstrated the anti-phytopathogenic efficiency of CMHRC compost. Hence, the present study illustrates the beneficiary aspects of utilizing CMHRs to produce biofertilizer with anti-phytopathogenic properties which can be safely used for tomato and Chinese cabbage plant growth.

Food waste and sewage sludge co-digestion amended with different biochars: VFA kinetics, methane yield and digestate quality assessment.

This work investigated the impact of the addition of different biochar types on mitigation of volatile fatty acid (VFA) accumulation, methane recovery and digestate quality in mesophilic food waste-sludge co-digestion. Four biochars derived from agricultural and sludge residues under different pyrolysis temperatures were compared. Specific biochar properties such as pH, surface area, chemical properties and presence of surface functional groups likely influenced biochar reactions during digestion, thereby resulting in a varying performance of different biochars. Miscanthus straw biochar addition led to the highest specific methane yield of 307 ± 0.3 mL CH4/g VSadded versus 241.87 ± 5.9 mL CH4/g VSadded from control with no biochar addition over 30 days of the co-digestion period. Biochar supplementation led to enhanced process stability which likely resulted from improved syntrophic VFA oxidation facilitated by specific biochar properties. Overall, a 21.4% increase in the overall methane production was obtained with biochar addition as compared to control. The resulting digestate quality was also investigated. Biochar-amended digester generated a digestate rich in macro- and micro-nutrients including K, Mg, Ca, Fe making biochar-amended digestate a potential replacement of agricultural lime fertilizer. This work demonstrated that the addition of specific biochars with desirable properties alleviated VFA accumulation and facilitated enhanced methane recovery, thereby providing a means to achieve process stability even under high organic loading conditions in co-digestions. Moreover, the availability of biochar-enriched digestate with superior characteristics than biochar-free digestate adds further merit to this process.

Effect of different-sized bulking agents on nitrification process during food waste digestate composting.

Food waste digestate (FWD) disposal is a serious bottleneck in anaerobic digestion plants to achieve a circular bioeconomy. FWD could be recycled into nitrogen-rich compost; however, the co-composting process optimisation along with bulking agents is required to reduce nitrogen loss and unwanted gaseous emissions. In the present study, two different-sized bulking agents, namely, wood shaving (WS) and fine sawdust (FS), were used to investigate their impact on FWD composting performance along with the nitrogen dynamics. The mixing of FWD with different bulking agents altered the physiochemical characteristics of composting matrix and the effective composting performance was observed through reduced ammonium nitrogen and increased seed germination index during 28 days of composting. The carbon loss of 19-22% through CO2 emission indicated similar carbon mineralisation with both types of sawdust; however, the nitrogen transformation pathways were different. Only WS treatment demonstrated the nitrification process, whereas the nitrogen loss was higher with FS. A total nitrogen loss of ∼15% was observed in treatments with FS, whereas WS treatments displayed a nitrogen loss of 12%. The outcome of the present study could significantly contribute to the practical aspect of the FWD composting operation with the promotion of the bio-recycling economy.

Influence of inoculum-to-substrate ratio on biogas enhancement during biochar-assisted co-digestion of food waste and sludge.

High accumulation of volatile fatty acids (VFAs) is one of the major concerns during mesophilic anaerobic co-digestion of food waste (FW) and sewage sludge (SS). Therefore, improving the stability of the anaerobic digestion process could surpass quick acidification while accelerating methanogenesis. In this study, the suitability of biochar-assisted co-digestion was evaluated at different inoculum and substrate ratios (I/S ratios: 0.1, 0.3, 0.6, and 0.9). The maximum methane yield of 256.85 mL/gVSadd was observed at an I/S ratio of 0.6. The results indicated fast volatile solid removal (∼ 47.17% to 73%) and a critical role of biochar addition in alleviating the underlying inhibitions. Substantial changes in the microbial community composition including Methanosata, Methanobrevibacter, and Methanosarcina were also observed which predominated and stabilised the methanogenesis process at higher I/S ratios. These results emphasised that the anaerobic co-digestion of FW/sludge is a promising approach, wherein the biochar amendment at different I/S ratios should be well maintained to avoid inhibitions from excess microbial VFA acidification of organic waste feedstocks.

A review on mechanistic understanding of microplastic pollution on the performance of anaerobic digestion.

Anaerobic digestion (AD) has emerged as a promising technology for diverting the organic waste from the landfills along with the production of clean energy. AD is a microbial-driven biochemical process wherein the plethora of microbial communities participate in converting the putrescible organic matter into biogas. Nevertheless, the AD process is susceptible to the external environmental factors such as presence of physical (microplastics) and chemical (antibiotics, pesticides) pollutants. The microplastics (MPs) pollution has received recent attention due to the increasing plastic pollution in terrestrial ecosystems. This review was aimed for holistic assessment of impact of MPs pollution on AD process to develop efficient treatment technology. First, the possible pathways of MPs entry into the AD systems were critically evaluated. Further, the recent literature on the experimental studies pertaining to the impact of different types of MPs at different concentrations on the AD process was reviewed. In addition, several mechanisms such as direct exposure of MPs on the microbial cells, indirect impact of MPs through the leaching of toxic chemicals and reactive oxygen species (ROS) formation on AD process were elucidated. Besides, the risk possessed by the increase of antibiotic resistance genes (ARGs) after the AD process due to the MPs stress on microbial communities were discussed. Overall, this review deciphered the severity of MPs pollution on AD process at different levels.

Photocatalytic degradation of naphthol blue from Batik wastewater using functionalized TiO2-based composites.

This work provides a first-time comparative study examining the photocatalytic activity of functionalized TiO2-based composites to eliminate naphthol blue in Batik wastewater. Reduced graphene oxide (RGO) was synthesized by oxidizing solid graphite using the Hummers' method followed by sonication and reduction. N-doped TiO2 (N-TiO2) was synthesized from titanium tetrachloride (TiCl4) and urea (CH4N2O) precursors by the sol-gel method. N-TiO2 modified RGO (RGO/NT) was synthesized using a hydrothermal method from N-TiO2 and RGO. Prepared TiO2-based composites and commercial TiO2, for comparison were characterized using Fourier transform infrared spectrometer (FTIR), X-Ray diffractometer (XRD), scanning electron microscope-energy dispersive X-ray (SEM-EDX), and UV-Vis diffuse reflectance spectrometer (UV-Vis DRS). FTIR characterization indicated Ti-N bonding in N-TiO2 and RGO/NT. XRD patterns showed that commercial TiO2 had a rutile phase, while N-TiO2 and RGO/NT had an anatase phase with crystal sizes of 30.09, 16.28, and 12.02 nm, respectively. SEM results displayed the presence of small and glossy white N-TiO2 dispersed on the surface of RGO. Characterization using UV-Vis DRS showed that the band gap energy values for TiO2, N-TiO2, and RGO/NT were 3.25, 3.12, and 3.08 eV with absorption regions at the wavelengths of 382, 398, and 403 nm, respectively. The highest photocatalytic activity for RGO/NT for degrading naphthol blue was obtained at pH 5, with a photocatalyst mass of 60 mg, and an irradiation of 15 min. Photocatalytic degradation by RGO/NT on Batik wastewater under visible light showed higher effectivity than under UV light.

Hydrochar prepared from digestate improves anaerobic co-digestion of food waste and sewage sludge: Performance, mechanisms, and implication.

This work reported a new waste functionalization and utilization method, which use digestate to prepare hydrochar to improve methane production from food waste (FW) and sewage sludge (SS). Experimental results presented that 10 g/L hydrochar obtained the cumulative methane production of 133.11 ± 1.18 mL/g volatile solids added, 26.99 % higher than that without hydrochar addition. By monitoring the conversion of model metabolic intermediates, 10 g/L hydrochar was determined to favor hydrolysis, acidogenesis and methonogenesis bio-processes involved in methane production, thus improving the degradation of solubilized organics and consumption of short-chain fatty acids (SCFAs) during the co-digestion. Microbial investigation revealed that 10 g/L hydrochar enriched the microbes relevant to methane production (e.g., Methanosaeta and Syntrophomonas), but reduced the abundances of hydrolysis- and acidogenesis-related microbes (e.g., Acinetobacter). This hydrochar-based preparation and utilization strategy might offer a novel paradigm for waste-control-waste, bringing economic and environmental benefits.

Enhanced stability of food waste anaerobic digestion under low inoculum to substrate ratio by using biochar.

The influence of biochar on anaerobic digestion (AD) of organic waste have been widely studied. However, the effect of biochar on the mitigation of acidification and subsequently the stimulation of methanogenesis recovery during mono food waste (FW) digestion process under a low inoculum to substrate (I/S) ratio (i.e. a high organic loading) is rarely investigated. In this study, the benefit of biochar with respect to methane production from FW was explored in a mono FW AD system with four different additional amounts of biochar, i.e. 0, 5, 10 and 15 g/L. Results revealed that biochar boosted methane production in AD at a low I/S ratio by 390-530% through stimulating methanogenic activity, improving organics removal and enhancing process stability. The biochar dosage of 10 g/L demonstrated the highest biodegradability of 92.3% and the highest specific methane production of 553.0 mL/g VSremoved among all groups. Without biochar addition, volatile fatty acids (VFAs) accumulated to 20 g/L and the highest total ammonium-N (TAN) was > 1200 mg/L. The suppression of methanogenesis was significantly correlated with VFA and TAN (p < 0.05). Therefore, biochar addition presented a positive effect on VFAs degradation and buffering capacity which could be an effective approach to enhance methane production from FW digestion at a low inoculum to substrate ratio without the fear of system failure.

Effect of inoculum pretreatment on the microbial and metabolic dynamics of food waste dark fermentation.

This study systematically evaluated and compared different inoculum pretreatment methods to quickly select dark fermentative bacteria from anaerobic sludge for the bioconversion of food waste. The hydrogen (H2) production rate was found to be highest for 'heat + CO2' treated inoculum at 140.75 ± 2.61 mL/L/h compared to control experiments (60.27 ± 2.61 mL/L/h). At the same time, H2 yield was found to be highest for alkali-treated inoculum at 157.25 ± 7.62 mL/g of volatile solids (VS) added compared to control experiments (91.61 ± 1.93 mL/g VS). Analysis of organic acids suggests a Clostridial-type fermentation with acetate (0.52 to 1.60 g/L) and butyrate (1.69 to 2.42 g/L) being the major by-products. The microbial data analysis showed that Firmicutes (63.64-90.39%), Bacteroidota (1.16-21.88%), and Proteobacteria (2.09-9.93%) were dominant at the phylum level, whereas genus-level classification showed Clostridium sensu stricto 1 (6.37-42.63%), Streptococcus (1.87-28.96%), Prevotella (0.57-16.59%), and Enterococcus (0.56-14.51%) dominated under different experimental conditions.

Bioreactor-scale production of rhamnolipids from food waste digestate and its recirculation into anaerobic digestion for enhanced process performance: Creating closed-loop integrated biorefinery framework.

Reaching industrially relevant productivities in bioprocesses and their efficient integration in the existing industrial infrastructure remain as important challenges in the circular economy to create closed loop sustainability framework. Using anaerobic digestion (AD) biorefinery as a model, the present work addressed these problems via integration of next-generation rhamnolipids production with AD. A high rhamnolipids concentration of 10.25 ± 1.34 g/L was obtained by fed-batch fermentation using food waste digestate as medium. Digestate-derived rhamnolipids contained Rha-C10-C10 and Rha-Rha-C10-C10 as the predominant congeners. These were used back in single-phase AD to demonstrate their effect on sludge solubilization and digestion efficiency. A dosage of 0.02 g rhamnolipids/g total suspended solids was found to be optimal which enhanced the hydrolysis-acidogenesis reactions to up to 27% over control. It however retarded methane production which could be overcome by the prolongation of digestion time. Finally, the value chain appreciation by the proposed process was demonstrated by a feasibility analysis.

Impact of total solids content on biochar amended co-digestion of food waste and sludge: Microbial community dynamics, methane production and digestate quality assessment.

This study evaluates the impact of biochar addition on the performance of anaerobic co-digestion of food waste (FW) and sewage sludge at different total solids (TS) contents (2.5 %, 5.0 %, and 7.5 %). Biochar co-digestion improved hydrolysis and acidogenesis by neutralizing volatile fatty acids (VFAs) reducing its inhibitions (2.6-fold removal), which elevated the soluble chemical oxygen demand (sCOD) degradation by 2.5 folds leading to a higher cumulative methane production compared to the control. This increase corresponded to an improvement of methane yields by ∼21 %-33 % (242-340 mL/gVSadd) at different TS contents. The biochar surface area offered substantial support for direct interspecies electron transfer (DIET) activity, and biofilm-mediated growth of methanogens i.e., Methanosarcina, Methanosata, and Methanobrevibacter. The biochar-enriched digestate improved the seed germination index, and bioavailability of plant nutrients such as N, P, K, and NH4+-N. This study reports an improved biochar-mediated anaerobic co-digestion for efficient and sustainable FW valorization.

Enhanced volatile fatty acid degradation and methane production efficiency by biochar addition in food waste-sludge co-digestion: A step towards increased organic loading efficiency in co-digestion.

This work investigated the effect of biochar addition to mitigate VFA accumulation and enhance methane production in mesophilic food waste/sludge co-digestion. Different types of biochar derived from agricultural and forestry residues at two pyrolysis temperatures were tested. Results showed that wheat straw biochar 550 °C supported the highest specific methane yield of 381.9 LCH4/kg VSadded and VS removal efficiency of 41.62% among all treatments. Degradation of propionic acid and long-chain fatty acids such as valeric, caproic and isovaleric acids was observed. This also corresponded to an increase in methanogenic favorable substrates including acetic acid (>40%) and butyric acid (~20%) over the control. Consequently, a 24% increase in overall methane production was obtained as compared to control. This demonstrated that biochar addition had positive effects on VFA degradation and methane production which could be a useful strategy to increase the organic loading in co-digestions without the fear of process failure.

Lipid accumulation potential of oleaginous yeasts: A comparative evaluation using food waste leachate as a substrate.

In present study, the efficiency of three oleaginous yeasts i.e., Yarrowia lipolytica, Rhodotorula glutinis and Cryptococcus curvatus were compared for their lipid assimilation capacities using three different FW-leachates as a medium. The FW-leachates were collected from dry anaerobic digesters and diluted to achieve carbohydrate content of 25gL-1 prior to yeast inoculations. Around 5% of yeast cultures were individually mixed in three different FW-leachate mediums and incubated under 30°C and 150rpm agitation for 6days. The Y. lipolytica produced high biomass with lipid contents of 49.0±2% on dry weight basis. Whereas, the acetic acid concentration of >6gL-1 inhibited the growth of R. glutinis. The study observed that the selection of appropriate FW-leachate composition is highly important for biolipid accumulation by oleaginous yeasts.

Waste-to-biofuel: production of biobutanol from sago waste residues.

The main concern of extensive production of biobutanol has been associated with the high cost of the substrate and the relatively low tolerance of Clostridia to biobutanol production. In this study, the use of fermentable cassava waste residue (CWR) as substrate for biobutanol production was investigated using solvent-tolerant Clostridium sp. Four of obligatory, solvent-producing bacteria were isolated from sago industry waste sites. The NSW, PNAS1, SB5 and SBI4 strains showed identical profiles of 16S rRNA gene sequence similarity of Bacillus coagulans, Clostridium bifermentans and Clostridium sp. (97% similarity) and a wide range of carbohydrate substrate; however, the CWR was found to be suitable for the production of biobutanol considerably. Batch culture study was carried out using parameters such as time and temperature and carbon sources have been studied and optimized. Using pre-optimized CWR medium, significant amount of solvent production was observed in NSW, PNAS1, SB5 and SBI4 with 1.53, 3.36, 1.56 and 2.5 g L-1of butanol yield and 6.84, 9.012, 8.32 and 8.22 g L-1of total solvents, respectively. On the basis of these studies, NSW is proposed to represent the B. coagulans for butanol production directly from sago waste residues.