A High Threshold of Biotherapeutic Aggregate Numbers is Needed to Induce an Immunogenic Response In Vitro, In Vivo, and in the Clinic.

BACKGROUND AND PURPOSE: There is concern that subvisible aggregates in biotherapeutic drug products pose a risk to patient safety. We investigated the threshold of biotherapeutic aggregates needed to induce immunogenic responses. METHODS AND RESULTS: Highly aggregated samples were tested in cell-based assays and induced cellular responses in a manner that depended on the number of particles. The threshold of immune activation varied by disease state (cancer, rheumatoid arthritis, allergy), concomitant therapies, and particle number. Compared to healthy donors, disease state patients showed an equal or lower response at the late phase (7 days), suggesting they may not have a higher risk of responding to aggregates. Xeno-het mice were used to assess the threshold of immune activation in vivo. Although highly aggregated samples (~ 1,600,000 particles/mL) induced a weak and transient immunogenic response in mice, a 100-fold dilution of this sample (~ 16,000 particles/mL) did not induce immunogenicity. To confirm this result, subvisible particles (up to ~ 18,000 particles/mL, containing aggregates and silicone oil droplets) produced under representative administration practices (created upon infusion of a drug product through an IV catheter) did not induce a response in cell-based assays or appear to increase the rate of adverse events or immunogenicity during phase 3 clinical trials. CONCLUSION: The ability of biotherapeutic aggregates to elicit an immune response in vitro, in vivo, and in the clinic depends on high numbers of particles. This suggests that there is a high threshold for aggregates to induce an immunogenic response which is well beyond that seen in standard biotherapeutic drug products.

A cross-industry forum on benchmarking critical quality attribute identification and linkage to process characterization studies.

Identification of Critical Quality Attributes (CQAs) and subsequent characterization in process development studies are the key elements of quality by design (QbD) for biopharmaceutical products. Since the inception of ICH Q8R2, several articles have been published on approaches to conducting CQA risk assessments as well as the application to process understanding. A survey was conducted by multiple companies participating in an International Consortium working group on the best practices for identifying CQAs with linkages to process characterization (PC) studies. The results indicate that the companies surveyed are using similar approaches/timing to identify CQAs during process development. Consensus was also observed among the companies surveyed with approaches to linkage of CQAs to process characterization studies leading to impact to control strategies and lifecycle management.

Chemical and Biophysical Characteristics of Monoclonal Antibody Solutions Containing Aggregates Formed during Metal Catalyzed Oxidation.

PURPOSE: To physicochemically characterize and compare monoclonal antibody (mAb) solutions containing aggregates generated via metal catalyzed oxidation (MCO). METHODS: Two monoclonal IgG2s (mAb1 and mAb2) and one monoclonal IgG1 (rituximab) were exposed to MCO with the copper/ascorbic acid oxidative system, by using several different methods. The products obtained were characterized by complementary techniques for aggregate and particle analysis (from oligomers to micron sized species), and mass spectrometry methods to determine the residual copper content and chemical modifications of the proteins. RESULTS: The particle size distribution and the morphology of the protein aggregates generated were similar for all mAbs, independent of the MCO method used. There were differences in both residual copper content and in chemical modification of specific residues, which appear to be dependent on both the protein sequence and the protocol used. All products showed a significant increase in the levels of oxidized His, Trp, and Met residues, with differences in extent of modification and specific amino acid residues modified. CONCLUSION: The extent of total oxidation and the amino acid residues with the greatest oxidation rate depend on a combination of the MCO method used and the protein sequence.

Structural Characterization of a Monoclonal Antibody-Maytansinoid Immunoconjugate.

Structural characterization was performed on an antibody-drug conjugate (ADC), composed of an IgG1 monoclonal antibody (mAb), mertansine drug (DM1), and a noncleavable linker. The DM1 molecules were conjugated through nonspecific modification of the mAb at solvent-exposed lysine residues. Due to the nature of the lysine conjugation process, the ADC molecules are heterogeneous, containing a range of species that differ with respect to the number of DM1 per antibody molecule. The DM1 distribution profile of the ADC was characterized by electrospray ionization mass spectrometry (ESI-MS) and capillary isoelectric focusing (cIEF), which showed that 0-8 DM1s were conjugated to an antibody molecule. By taking advantage of the high-quality MS/MS spectra and the accurate mass detection of diagnostic DM1 fragment ions generated from the higher-energy collisional dissociation (HCD) approach, we were able to identify 76 conjugation sites in the ADC, which covered approximately 83% of all the putative conjugation sites. The diagnostic DM1 fragment ions discovered in this study can be readily used for the characterization of other ADCs with maytansinoid derivatives as payload. Differential scanning calorimetric (DSC) analysis of the ADC indicated that the conjugation of DM1 destabilized the C(H)2 domain of the molecule, which is likely due to conjugation of DM1 on lysine residues in the C(H)2 domain. As a result, methionine at position 258 of the heavy chain, which is located in the C(H)2 domain of the antibody, is more susceptible to oxidation in thermally stressed ADC samples when compared to that of the naked antibody.

Highly aggregated antibody therapeutics can enhance the in vitro innate and late-stage T-cell immune responses.

Aggregation of biotherapeutics has the potential to induce an immunogenic response. Here, we show that aggregated therapeutic antibodies, previously generated and determined to contain a variety of attributes (Joubert, M. K., Luo, Q., Nashed-Samuel, Y., Wypych, J., and Narhi, L. O. (2011) J. Biol. Chem. 286, 25118-25133), can enhance the in vitro innate immune response of a population of naive human peripheral blood mononuclear cells. This response depended on the aggregate type, inherent immunogenicity of the monomer, and donor responsiveness, and required a high number of particles, well above that detected in marketed drug products, at least in this in vitro system. We propose a cytokine signature as a potential biomarker of the in vitro peripheral blood mononuclear cell response to aggregates. The cytokines include IL-1ß, IL-6, IL-10, MCP-1, MIP-1α, MIP-1ß, MMP-2, and TNF-α. IL-6 and IL-10 might have an immunosuppressive effect on the long term immune response. Aggregates made by stirring induced the highest response compared with aggregates made by other methods. Particle size in the 2-10 µm range and the retention of some folded structure were associated with an increased response. The mechanism of aggregate activation at the innate phase was found to occur through specific cell surface receptors (the toll-like receptors TLR-2 and TLR-4, FcγRs, and the complement system). The innate signal was shown to progress to an adaptive T-cell response characterized by T-cell proliferation and secretion of T-cell cytokines. Investigating the ability of aggregates to induce cytokine signatures as biomarkers of immune responses is essential for determining their risk of immunogenicity.

Quantitative measurement of the requirement of diverse protein degradation pathways in MHC class I peptide presentation.

Peptides from degradation of intracellular proteins are continuously displayed by major histocompatibility complex (MHC) class I. To better understand origins of these peptides, we performed a comprehensive census of the class I peptide repertoire in the presence and absence of ubiquitin-proteasome system (UPS) activity upon developing optimized methodology to enrich for and quantify these peptides. Whereas most class I peptides are dependent on the UPS for their generation, a surprising 30%, enriched in peptides of mitochondrial origin, appears independent of the UPS. A further ~10% of peptides were found to be dependent on the proteasome but independent of ubiquitination for their generation. Notably, clinically achievable partial inhibition of the proteasome resulted in display of atypical peptides. Our results suggest that generation of MHC class I•peptide complexes is more complex than previously recognized, with UPS-dependent and UPS-independent components; paradoxically, alternative protein degradation pathways also generate class I peptides when canonical pathways are impaired.

Classification and characterization of therapeutic antibody aggregates.

A host of diverse stress techniques was applied to a monoclonal antibody (IgG(2)) to yield protein particles with varying attributes and morphologies. Aggregated solutions were evaluated for percent aggregation, particle counts, size distribution, morphology, changes in secondary and tertiary structure, surface hydrophobicity, metal content, and reversibility. Chemical modifications were also identified in a separate report (Luo, Q., Joubert, M. K., Stevenson, R., Narhi, L. O., and Wypych, J. (2011) J. Biol. Chem. 286, 25134-25144). Aggregates were categorized into seven discrete classes, based on the traits described. Several additional molecules (from the IgG(1) and IgG(2) subtypes as well as intravenous IgG) were stressed and found to be defined with the same classification system. The mechanism of protein aggregation and the type of aggregate formed depends on the nature of the stress applied. Different IgG molecules appear to aggregate by a similar mechanism under the same applied stress. Aggregates created by harsh mechanical stress showed the largest number of subvisible particles, and the class generated by thermal stress displayed the largest number of visible particles. Most classes showed a disruption of the higher order structure, with the degree of disorder depending on the stress process. Particles in all classes (except thermal stress) were at least partially reversible upon dilution in pH 5 buffer. High copper content was detected in isolated metal-catalyzed aggregates, a stress previously shown to produce immunogenic aggregates. In conclusion, protein aggregates can be a very heterogeneous population, whose qualities are the result of the type of stress that was experienced.

Chemical modifications in therapeutic protein aggregates generated under different stress conditions.

In this study, we characterized the chemical modifications in the monoclonal antibody (IgG(2)) aggregates generated under various conditions, including mechanical, chemical, and thermal stress treatment, to provide insight into the mechanism of protein aggregation and the types of aggregate produced by the different stresses. In a separate study, additional biophysical characterization was performed to arrange these aggregates into a classification system (Joubert, M. K., Luo, Q., Nashed-Samuel, Y., Wypych, J., and Narhi, L. O. (2011) J. Biol. Chem. 286, 25118-25133). Here, we report that different aggregates possessed different types and levels of chemical modification. For chemically treated samples, metal-catalyzed oxidation using copper showed site-specific oxidation of Met(246), His(304), and His(427) in the Fc portion of the antibody, which might be attributed to a putative copper-binding site. For the hydrogen peroxide-treated sample, in contrast, four solvent-exposed Met residues in the Fc portion were completely oxidized. Met and/or Trp oxidation was observed in the mechanically stressed samples, which is in agreement with the proposed model of protein interaction at the air-liquid interface. Heat treatment resulted in significant deamidation but almost no oxidation, which is consistent with thermally induced aggregates being generated by a different pathway, primarily by perturbing conformational stability. These results demonstrate that chemical modifications are present in protein aggregates; furthermore, the type, locations, and severity of the modifications depend on the specific conditions that generated the aggregates.

Observation of Heavy-Chain C-Terminal Amidation in Human Endogenous IgG.

Therapeutic IgG mAbs expressed from Chinese hamster ovary (CHO) cells are known to contain three C-terminal variants in their heavy chains, namely, the unprocessed C-terminal lysine, the processed C-terminal lysine, and C-terminal amidation. Although the presence of C-terminal amidation in CHO-expressed IgGs is well studied, the biological impact of the variant on the safety and efficacy of biotherapeutics has not been well understood. To further our biological understanding of C-terminal amidation, we analyzed a series of IgG samples, including both endogenous human IgGs as well as recombinant IgGs of different subclasses expressed from both CHO and murine cell lines, for their heavy-chain C-terminal variants by LC-MS/MS based peptide mapping. The results demonstrate that heavy-chain C-terminal amidation is a common variant occurring in IgG of all four subclasses (IgG1, IgG2, IgG3 and IgG4). The variant is generally present in recombinant IgG mAbs expressed from CHO cell lines but not in IgG mAbs expressed from murine cell lines, whereas the IgGs expressed from murine cell lines contain a much larger amount of unprocessed C-terminal lysine. Additionally, a significant amount of heavy-chain C-terminal amidation is observed in endogenous human IgGs, indicating that small amount of the variant present in therapeutic IgGs does not pose a safety concern.

Use of In Vitro Human Skin Models to Assess Potential Immune Activation In Response to Biotherapeutic Attributes and Process-related Impurities.

Subcutaneous (SubQ) injection is a common administration route for biotherapeutics. However, limited tools are available for understanding the dynamic relationships between drug products and resident cells following injection. Advances in tissue engineering have enabled the production of in vitro skin models that recapitulate the morphological structure and functional activity of human skin. Here we explore the use of a commercially available skin model to investigate potential immune activation in response to subcutaneously injected biotherapeutics. Exposure to high levels of a mixture of process-related impurities (that are known potent immune system activators) induced a robust immune response from the skin model, as indicated by enhanced metabolic activity and increased secretion of 19 cytokines and chemokines. The skin model also responded to aggregated antibodies (generated by extreme mechanical stirring and pH-jump stress, which resulted in orders of magnitude higher particle numbers than that found in products), as shown by the secretion of several signature cytokines (GM-CSF, RANTES, and MCP-1). However, the magnitude of the responses to the aggregates were significantly lower than the response to the impurities. These results highlight the promising utility of in vitro skin models for investigating the potential immune response to process-related impurities and biotherapeutic attributes in a subcutaneous environment. The use of skin models for assessing drug safety may provide new insights to help guide drug product and process development, and potentially mitigate the risk of injection site reactions and systemic immunogenic responses that may compromise the safety and efficacy of subcutaneously administered drugs.

State-of-the-art and emerging trends in analytical approaches to pharmaceutical-product commercialization.

The biopharmaceutical landscape continues to evolve rapidly, and associated modality complexity and the need to improve molecular understanding require concomitant advances in analytical approaches used to characterize and release the product. The Product Quality Attribute Assessment (PQAA) and Quality Target Product Profile (QTPP) frameworks help catalog and translate molecular understanding to process and product-design targets, thereby enabling reliable manufacturing of high-quality product. The analytical target profile forms the basis of identifying best-fit analytical methods for attribute measurement and continues to be successfully used to develop robust analytical methods for detailed product characterization as well as release and stability testing. Despite maturity across multiple testing platforms, advances continue to be made, several with the potential to alter testing paradigms. There is an increasing role for mass spectrometry beyond product characterization and into routine release testing as seen by the progress in multi-attribute methods and technologies, applications to aggregate measurement, the development of capillary zone electrophoresis (CZE) coupled with mass spectrometry (MS) and capillary isoelectric focusing (CIEF) with MS for measurement of glycans and charged species, respectively, and increased application to host cell protein measurement. Multitarget engaging multispecific modalities will drive advances in bioassay platforms and recent advances both in 1- and 2-D NMR approaches could make it the method of choice for characterizing higher-order structures. Additionally, rigorous understanding of raw material and container attributes is necessary to complement product understanding, and these collectively can enable robust supply of high-quality product to patients.

A Mass Spectrometric Characterization of Light-Induced Modifications in Therapeutic Proteins.

During the development of a therapeutic protein, its quality attributes that pertain to the primary structure must be appropriately characterized, commonly by LC-MS/MS peptide mapping experiments. Extracting attribute information from LC-MS/MS data requires knowledge of the attribute of interest. Therefore, it is important to understand all potential modifications on the therapeutic proteins. In this work, we performed UV and visible light irradiation experiments on several therapeutic proteins, with or without the presence of a photosensitizer. Light-induced modifications were detected and characterized by tryptic digestion followed by LC-MS/MS analysis. A list of potential light-induced modifications, with their respective mass changes, was obtained. These modifications are primarily on methionine, tryptophan, histidine, cysteine, tyrosine and phenylalanine residues. Many of these modifications have not been previously reported on therapeutic proteins. Our findings therefore provide a database of potential light-induced modifications that would enable the routine characterization of light-induced modifications on therapeutic proteins.

A modeled structure of an aptamer-gp120 complex provides insight into the mechanism of HIV-1 neutralization.

The HIV-1 envelope glycoprotein, gp120, is a key target for a class of drugs called entry inhibitors. Here we used molecular modeling to construct a three-dimensional model of an anti-gp120 RNA aptamer, B40t77, alone and in complex with gp120. An initial model of B40t77 was built from the predicted secondary structure and then subjected to a combination of energy minimization and molecular dynamics. To model the B40t77-gp120 complex, we docked the B40t77 predicted structure onto the CD4-induced epitope of the gp120 crystal structure. A series of gp120 point mutations in the predicted B40t77-gp120 interface were measured for their binding affinity for B40t77 by surface plasmon resonance. According to the model, of the 10 gp120 amino acids that showed a reduction in the level of binding when mutated to alanine, all of them are modeled as making direct contact with B40t77 as part of a hydrogen bonding network. Comparison by electron microscopy of the B40t77-gp120 complex with gp120 alone revealed that only the longest dimension of the complex significantly increased in length, in a manner consistent with the predicted model. Binding assays revealed that B40t77 can weaken the binding of gp120 to the monoclonal antibodies B6, B12, and 2G12, none of which have binding sites that overlap with B40t77, as well as strengthen the binding to the antibody 19b. Thus, B40t77 may induce distant conformational changes in gp120 that disrupt its association with host cells and may suggest a mechanism for aptamer neutralization of HIV-1.

Zinc binding drives sheet formation by the SAM domain of diacylglycerol kinase δ.

The diacylglycerol kinase (DGK) family of enzymes plays critical roles in lipid signaling pathways by converting diacylglycerol to phosphatidic acid, thereby downregulating signaling by the former and upregulating signaling by the latter second messenger. Ten DGK family isozymes have been identified to date, which possess different interaction motifs imparting distinct temporal and spatial control of DGK activity to each isozyme. Two DGK family members, δ and η, contain a sterile alpha motif (SAM) domain. The SAM domain of DGKδ1 forms helical polymers that are important for retaining the enzyme in cytoplasmic puncta, thereby inhibiting activity at the plasma membrane until pathway activation. Because zinc was found to be important for stabilizing the similar SAM polymers of the scaffolding protein Shank-3, we investigated the potential role of zinc in DGKδ SAM domain (DGKδSAM) assembly. We find that DGKδSAM binds zinc at multiple sites, driving the organization of the DGKδSAM into large sheets of polymers. Moreover, a mutant DGKδ containing a SAM domain refractory to zinc binding diminishes the formation of cytoplasmic puncta, shows partially impaired regulation of transport to the plasma membrane, and lacks the ability to inhibit the formation of CopII coated vesicles. These results suggest that zinc may play an important role in the assembly and physiology of the DGKδ isozyme.

Characterization of Subvisible Particles in Biotherapeutic Prefilled Syringes: The Role of Polysorbate and Protein on the Formation of Silicone Oil and Protein Subvisible Particles After Drop Shock.

Subvisible particles (SbVPs) are a critical quality attribute for biotherapeutics. Particle content in prefilled syringes (PFSs) of a biotherapeutic can include protein particles and silicone oil particles (SiOP). Here, a real-world protein therapeutic PFS shows that although polysorbate is effective in preventing protein particle formation, it also leads to the formation of SiOP. PFSs of protein and buffer formulations in the presence and absence of polysorbate are subjected to a drop shock to generate SbVP and the effect of polysorbate and protein in generating SbVP is investigated. Particle characterization by light obscuration and flow imaging shows that polysorbate prevents protein particle formation as intended, but the presence of polysorbate substantially increases the formation of SiOP. The protein itself also acts as a surfactant and leads to increased SiOP, but to a lesser degree compared to polysorbate. In a separate companion study by Joh et al., the risk of immunogenicity was assessed using in vivo and in vitro models. Flow imaging distinguishes between SiOP and protein particles and enables risk assessment of the natures of different SbVP in PFSs.

Glycan engineering reveals interrelated effects of terminal galactose and core fucose on antibody-dependent cell-mediated cytotoxicity.

Antibody-dependent cell-mediated cytotoxicity (ADCC) has been identified as one of the potentially critical effector functions underlying the clinical efficacy of some therapeutic immunoglobin G1 (IgG1) antibodies. It has been well established that higher levels of afucosylated N-linked glycan structures on the Fc region enhance the IgG binding affinity to the FcγIIIa receptor and lead to increased ADCC activity. However, whether terminal galactosylation of an IgG1 impacts its ADCC activity is less understood. Here, we used a new strategy for glycan enrichment and remodeling to study the impact of terminal galactose on ADCC activity for therapeutic IgG1s. Our results indicate that the degree of influence of terminal galactose on in vitro ADCC activity depends on the presence or absence of the core fucose, which is typically linked to the first N-acetyl glucosamine residue of an N-linked glycosylation core structure. Specifically, terminal galactose on afucosylated IgG1 mAbs enhanced ADCC activity with impact coefficients (ADCC%/Gal%) more than 20, but had minimal influence on ADCC activity on fucosylated structures with impact coefficient in the range of 0.1-0.2. Knowledge gained here can be used to guide product and process development activities for biotherapeutic antibodies that require effector function for efficacy, and also highlight the complexity in modulating the immune response through N-linked glycosylation of antibodies.

Silicone Oil Particles in Prefilled Syringes With Human Monoclonal Antibody, Representative of Real-World Drug Products, Did Not Increase Immunogenicity in In Vivo and In Vitro Model Systems.

Silicone oil is a lubricant for prefilled syringes (PFS), a common primary container for biotherapeutics. Silicone oil particles (SiOP) shed from PFS are a concern for patients due to their potential for increased immunogenicity and therefore also of regulatory concern. To address the safety concern in a context of manufacturing and distribution of drug product (DP), SiOP was increased (up to ∼25,000 particles/mL) in PFS filled with mAb1, a fully human antibody drug, by simulated handling of DP mimicked by drop shock. These samples are characterized in a companion report (Jiao N et al. J Pharm Sci. 2020). The risk of immunogenicity was then assessed using in vitro and in vivo immune model systems. The impact of a common DP excipient, polysorbate 80, on both the formation and biological consequences of SiOP was also tested. SiOP was found associated with (1) minimal cytokine secretion from human peripheral blood mononuclear cells, (2) no response in cell lines that report NF-κB/AP-1 signaling, and (3) no antidrug antibodies or significant cytokine production in transgenic Xeno-het mice, whether or not mAb1 or polysorbate 80 was present. These results suggest that SiOP in mAb1, representative of real-world DP in PFS, poses no increased risk of immunogenicity.

Determination of interactions between antibody biotherapeutics and copper by size exclusion chromatography (SEC) coupled with inductively coupled plasma mass spectrometry (ICP/MS).

The concept of coupling of size-exclusion HPLC with ICP/MS (SEC-ICP/MS) was first applied in this work as a novel approach in the biotechnology field to assess metal binding to Immunoglobulin G (IgG) mAbs. This method can be used to probe the mechanism and biophysical properties of metal-protein interactions to gain a deeper understanding of the potential impact of metals during drug product manufacturing. Two IgG1s and one IgG2 drugs were investigated. Cu2+ was selected as the metal of interest due to its known ability to form strong complexes with organic molecules and to bind and enhance the degradation of mAbs. Instrument and separation conditions (interface, columns, and mobile phase) were studied for the separation of the protein-metal bound and unbound fractions of a bovine superoxide dismutase (SOD) standard prior to on-line detection of the mAb-metal (Cu) binding. The SEC-ICP/MS method was used to show copper binding by biotherapeutics by comparing the retention times of the protein by SEC and the metal by ICP/MS, to see if they co-elute at the same time. The approach developed offers considerable advantages over methods based on ultrafiltration followed by off-line metal determination in terms of speed, simplicity, precision and selectivity regarding the molecular weight of the complexes involved. In conjunction with other techniques, this method may provide in-depth knowledge of metal-induced mAb degradation mechanisms in biologics process development, be used as an analytical tool for mAb manufacturing in the cell culture process, and be applied during various stages of drug product manufacturing to gain a deeper understanding of the potential impact of metals during biotherapeutic development.

Impact of Precipitation of Antibody Therapeutics After Subcutaneous Injection on Pharmacokinetics and Immunogenicity.

Antibody therapeutics with poor solubility in the subcutaneous matrix may carry unintended risks when administered to patients. The objective of this work was to estimate the risk of antibodies that precipitate in vitro at neutral pH by determining the impact of poor solubility on distribution of the drug from the injection site as well as immunogenicity in vivo. Using fluorescence imaging in a mouse model, we show that one such precipitation-prone antibody is retained at the injection site in the subcutaneous space longer than a control antibody. In addition, we demonstrate that retention at the injection site through aggregation is concentration-dependent and leads to macrophage association and germinal center localization. Although there was delayed disposition of the aggregated antibody to draining lymph nodes, no overall impact on the immune response in lymph nodes, systemic exposure of the antibody, or enhancement of the anti-drug antibody response was evident. Unexpectedly, retention of the precipitated antibody in the subcutaneous space delayed the onset of the immune response and led to an immune suppressive response. Thus, we conclude that precipitation due to poor solubility of high doses of antibody formulations delivered subcutaneously may not be of special concern in terms of exposure or immunogenicity.

Evaluating Immunogenicity Risk Due to Host Cell Protein Impurities in Antibody-Based Biotherapeutics.

A potential risk factor for immunogenicity of a biotherapeutic is the low levels of host cell protein (HCP) impurities that remain in the product following the purification process. During process development, significant attention has been devoted to removing HCPs due to their potential safety risk. Samples from different purification steps of several monoclonal antibodies (mAbs) purified by one type of platform were evaluated for their residual Chinese Hamster Ovary (CHO) cell-derived HCP content. HCPs in both in-process (high levels of HCP) and highly purified (low levels of HCP) samples were identified and quantitated by proteomic analysis via mass spectrometry. The responses to HCPs were evaluated in an in vitro assay using PBMC from a population of healthy and disease state individuals. Results indicated that samples with up to 4000 ppm HCP content (levels 200 times greater than the drug substance) did not pose a higher immunogenicity risk than highly purified mAb samples. As an orthogonal method to predict immunogenicity risk, in silico algorithms that probe amino acid sequence for foreign epitope content were used to evaluate over 20 common HCPs (identified in the different mAb samples). Only a few HCPs were identified as high risk by the algorithms; however, the in vitro assay results indicated that the concentration of these HCPs from in-process biotherapeutic mAb samples was not sufficient to stimulate an immune response. This suggests that high levels of HCP in mAb biotherapeutics purified by this type of platform do not increase the potential risk of immunogenicity of these molecules. Insights from these studies can be applied to HCP control and risk assessment strategies.