Investigating postsynaptic effects of a Drosophila neuropeptide on muscle contraction.

The Drosophila neuropeptide, DPKQDFMRFamide, was previously shown to enhance excitatory junctional potentials (EJPs) and muscle contraction by both presynaptic and postsynaptic actions. Since the peptide acts on both sides of the synaptic cleft, it has been difficult to examine postsynaptic modulatory mechanisms, particularly when contractions are elicited by nerve stimulation. Here, postsynaptic actions are examined in 3rd instar larvae by applying peptide and the excitatory neurotransmitter, l-glutamate, in the bathing solution to elicit contractions after silencing motor output by removing the central nervous system (CNS). DPKQDFMRFamide enhanced glutamate-evoked contractions at low concentrations (EC50 1.3 nM), consistent with its role as a neurohormone, and the combined effect of both substances was supra-additive. Glutamate-evoked contractions were also enhanced when transmitter release was blocked in temperature-sensitive (Shibire) mutants, confirming the peptide's postsynaptic action. The peptide increased membrane depolarization in muscle when co-applied with glutamate, and its effects were blocked by nifedipine, an L-type channel blocker, indicating effects at the plasma membrane involving calcium influx. DPKQDFMRFamide also enhanced contractions induced by caffeine in the absence of extracellular calcium, suggesting increased calcium release from the sarcoplasmic reticulum (SR) or effects downstream of calcium release from the SR. The peptide's effects do not appear to involve calcium/calmodulin-dependent protein kinase II (CaMKII), previously shown to mediate presynaptic effects. The approach used here might be useful for examining postsynaptic effects of neurohormones and cotransmitters in other systems.NEW & NOTEWORTHY Distinguishing presynaptic and postsynaptic effects of neurohormones is a long-standing challenge in many model organisms. Here, postsynaptic actions of DPKQDFMRFamide are demonstrated by assessing its ability to potentiate contractions elicited by direct application of the neurotransmitter, glutamate, when axons are silent and when transmitter release is blocked. The peptide acts at multiple sites to increase contraction, increasing glutamate-induced depolarization at the cell membrane, acting on L-type channels, and acting downstream of calcium release from the sarcoplasmic reticulum.

Comprehensive comparative study of Chiari-like malformation in veterinary and human medicine.

This review aims to enrich our understanding of Chiari-like malformation (CLM) by combining human and veterinary insights, and providing a detailed cross-species overview. CLM is a developmental abnormality characterised by caudal displacement of the hindbrain into the foramen magnum due to an entire brain parenchymal shift caused by insufficient skull volume. This malformation leads to a progressive obstruction at the craniocervical junction, which disrupts the normal cerebrospinal fluid flow, leading to secondary syringomyelia. The clinical signs of CLM and syringomyelia include phantom scratching, head tilt, head tremor, ataxia, tetraparesis, pain, muscle atrophy, and scoliosis or torticollis. Magnetic resonance imaging remains the gold standard for diagnosing CLM, since it allows the visualisation of abnormal findings such as the caudal cerebellar herniation, caudal cerebellar compression from occipital dysplasia, and attenuated cerebrospinal fluid cisternae. Although various medical and surgical interventions, including foramen magnum decompression, can provide temporary symptomatic/clinical sign relief, current literature shows a lack of sustained long-term efficacy. Therefore, additional research is needed to evaluate the long-term effects of existing treatment strategies and to compare different techniques utilised in conjunction with foramen magnum decompression.

Modulation of neuromuscular synapses and contraction in Drosophila 3rd instar larvae.

Over the past four decades, Drosophila melanogaster has become an increasingly important model system for studying the modulation of chemical synapses and muscle contraction by cotransmitters and neurohormones. This review describes how advantages provided by Drosophila have been utilized to investigate synaptic modulation, and it discusses key findings from investigations of cotransmitters and neurohormones that act on body wall muscles of 3rd instar Drosophila larvae. These studies have contributed much to our understanding of how neuromuscular systems are modulated by neuropeptides and biogenic amines, but there are still gaps in relating these peripheral modulatory effects to behavior.

Clinical and audiological characteristics of 1000Hz audiometric notch patients.

PURPOSE: Among the hearing loss patients, we can confirm that the hearing loss of the specific frequency decreases, such as the 2000Hz notch in otosclerosis and the 4000Hz notch (c5-dip) in noise-induced hearing loss. The 1000Hz notch (c3-dip), however, is rarely studied. We fortuitously encountered a group of patients with a 1kHz hearing loss and report it with a review of the literature. METHODS: Otological history, audiogram, diagnosis, occupation, and history of noise exposure were reviewed from charts and telephone interview, and compared between c3-dip and c5-dip patients (n=98). RESULTS: Thirty-one patients (mean age: 46.2years) demonstrated 1kHz hearing loss; these included 11 males. The pure-tone threshold was 37.97dB at 1kHz and the average threshold was 22.38dB at other frequencies. In the c3-dip group, tinnitus was the most common complaint, while sudden sensorineural hearing loss and idiopathic tinnitus (n=8 each) were the most common diagnoses. Female patients and unilateral cases were more common in the c3-dip than in the c5-dip group, and ear fullness was more common in the c3-dip group than in the c5-dip group. The duration of occupation-related noise exposure was longer in the c5 group, and head or ear trauma was more frequent in the c3-dip group. CONCLUSION: We have defined a new clinical entity of 1kHz hearing loss in patients, defined as the c3-dip, which was clinically and audiologically distinct from the c5-dip. Further study is needed to clarify this new entity of hearing loss.

Characterizing the physiological and behavioral roles of proctolin in Drosophila melanogaster.

The neuropeptide proctolin (RYLPT) plays important roles as both a neurohormone and a cotransmitter in arthropod neuromuscular systems. We used third-instar Drosophila larvae as a model system to differentiate synaptic effects of this peptide from its direct effects on muscle contractility and to determine whether proctolin can work in a cell-selective manner on muscle fibers. Proctolin did not appear to alter the amplitude of excitatory junctional potentials but did induce sustained muscle contractions in preparations where the CNS had been removed and no stimuli were applied to the remaining nerves. Proctolin-induced contractions were dose-dependent, were reduced by knocking down expression of the Drosophila proctolin receptor in muscle tissue, and were larger in some muscle cells than others (i.e., larger in fibers 4, 12, and 13 than in 6 and 7). Proctolin also increased the amplitude of nerve-evoked contractions in a dose-dependent manner, and the magnitude of this effect was also larger in some muscle cells than others (again, larger in fibers 4, 12, and 13 than in 6 and 7). Increasing the intraburst impulse frequency and number of impulses per burst increased the magnitude of proctolin's enhancement of nerve-evoked contractions and decreased the threshold and EC50 concentrations for proctolin to enhance nerve-evoked contractions. Reducing proctolin receptor expression decreased the velocity of larval crawling at higher temperatures, and thermal preference in these larvae. Our results suggest that proctolin acts directly on body-wall muscles to elicit slow, sustained contractions and to enhance nerve-evoked contractions, and that proctolin affects muscle fibers in a cell-selective manner.

Reconstructive surgery with an autologous bone graft in a dog with presumptive chronic non-bacterial osteomyelitis.

A 15-year-old Cocker Spaniel was referred to for the evaluation of left forelimb lameness. Radiographic and computed tomography examinations revealed osteolysis of the proximal left third, fourth and fifth metacarpal bones and pathological fractures of the proximal left fourth metacarpal bone. Histopathological examination via bone biopsy did not provide a definitive diagnosis, and the owner elected limb-sparing surgery. The fourth metacarpal bone and digits were amputated. Subsequently, autologous bone grafts were performed on the lytic area of the third and fifth metacarpal bones. The dog showed improvement in gait 7 weeks after reconstructive surgery. Chronic non-bacterial osteomyelitis (CNO) was diagnosed by exclusion. To the best of our knowledge, CNO has not been previously reported in dogs.

Surgical modeling of Chiari-like malformation in rats: Insights from canine morphology.

BACKGROUND: Chiari-like malformation in dogs and Chiari malformation type 1 in humans are conditions characterized by a relatively small caudal cranial fossa, leading to cerebellar herniation. This study aimed to develop a rat model of Chiari-like malformation using surgical techniques based on morphological characteristics observed in dogs. METHODS: Endocranial magnetic resonance images of both normal dogs and dogs diagnosed with Chiari-like malformation were retrospectively analyzed. Measurements of the caudal cranial fossa volume, rostral and medial fossa volume, and volume index were taken. The differences in caudal cranial fossa volume and volume index between normal dogs and those diagnosed with Chiari-like malformation were then utilized to create a rat model of Chiari-like malformation through surgical intervention. The measurements were conducted on both the rat Chiari-like malformation models and normal rats, with each measurement taken twice and the mean values calculated. RESULTS: Significant differences were found between normal dogs and dogs diagnosed with Chiari-like malformation in terms of the volume of the caudal cranial fossa (27.62% reduction) and the volume index (23.36% reduction) (p<0.05). These differences were used to develop a rat model, which also showed significant reductions in both caudal cranial fossa volume (29.52%) and volume index (28.30%) compared to normal rats (p<0.05). The condition in the rat model was confirmed through magnetic resonance imaging, which revealed cerebellar herniation into the foramen magnum. CONCLUSIONS: The study successfully established a rat model of Chiari-like malformation that accurately reproduces the morphological features observed in dogs. This model potentially serves as a valuable tool for investigating the pathological mechanisms and potential therapeutic approaches for Chiari-like malformation in veterinary medicine.

Boosting the Output Performance of the MoS2 Monolayer-Based Piezoelectric Nanogenerator by Artificial Dual Strain Concentration.

Piezoelectric nanogenerators (PENGs) with molybdenum disulfide (MoS2) monolayers have been intensively studied owing to their superior mechanical durability and stability. However, the limited output performance resulting from a small active area and low strain levels continues to pose a significant challenge that should be overcome. Herein, we report a novel strategy for the epoch-making output performance of a PENG with a MoS2 monolayer by adopting the additive strain concentration concept. The simulation study indicates that strain in the MoS2 monolayer can be initially augmented by the wavy structure resulting from the prestretched poly(dimethylsiloxane) (PDMS) and is further increased through flexural deformation (i.e., bending). Based on these studies, we have developed concentrated strain-applied PENGs with MoS2 monolayers. The wavy structures effectively applied strain to the MoS2 monolayer and generated a piezoelectric output voltage and current of around 580 mV and 47.5 nA, respectively. Our innovative approach to enhancing the performance of PENGs with MoS2 monolayers through the artificial dual strain concept has led to groundbreaking results, achieving the highest recorded output voltage and current for PENGs based on two-dimensional (2D) materials, which provides unique opportunities for the 2D-based energy harvesting field and structural insight into how to improve the net strain on 2D materials.

A Novel Passive Shoulder Exoskeleton Using Link Chains and Magnetic Spring Joints.

Work-related musculoskeletal disorders represent a major occupational disability issue, and 53.4% of these disorders occur in the back or shoulders. Various types of passive shoulder exoskeletons have been introduced to support the weight of the upper arm and work tools during overhead work, thereby preventing injuries and improving the work environment. The general passive shoulder exoskeleton is constructed with rigid links and joints to implement shoulder rotation, but there exists a challenge to align with the flexible joint movements of the human shoulder. Also, a force-generating part using mechanical springs require additional mechanical components to generate torque similar to the shoulder joint, resulting in increased overall volume and inertia to the upper arm. In this study, we propose a new type of passive shoulder exoskeleton that uses magnetic spring joint and link chain. The redundant degrees of freedom in the link chains enables to follow the shoulder joint movement in the horizontal direction, and the magnetic spring joint generates torque without additional parts in a compact form. Conventional exoskeletons experience a loss in the assisting torque when the center of shoulder rotation changed during arm elevation. Our exoskeleton minimizes the torque loss by customizing the installation height and initial angle of the magnetic spring joint. The performances of the proposed exoskeleton were verified by an electromyographic evaluation of shoulder-related muscles in overhead work and box lifting task.

Highly efficient microbial inactivation enabled by tunneling charges injected through two-dimensional electronics.

Airborne pathogens retain prolonged infectious activity once attached to the indoor environment, posing a pervasive threat to public health. Conventional air filters suffer from ineffective inactivation of the physics-separated microorganisms, and the chemical-based antimicrobial materials face challenges of poor stability/efficiency and inefficient viral inactivation. We, therefore, developed a rapid, reliable antimicrobial method against the attached indoor bacteria/viruses using a large-scale tunneling charge-motivated disinfection device fabricated by directly dispersing monolayer graphene on insulators. Free charges can be stably immobilized under the monolayer graphene through the tunneling effect. The stored charges can motivate continuous electron loss of attached microorganisms for accelerated disinfection, overcoming the diffusion limitation of chemical disinfectants. Complete (>99.99%) and broad-spectrum disinfection was achieved <1 min of attachment to the scaled-up device (25 square centimeters), reliably for 72 hours at high temperature (60°C) and humidity (90%). This method can be readily applied to high-touch surfaces in indoor environments for pathogen control.

Fabricating High-Resolution and High-Dimensional Microneedle Mold through the Resolution Improvement of Stereolithography 3D Printing.

Microneedles are transdermal drug delivery tools that can be fabricated simply, economically, and rapidly using SLA 3D printing. However, SLA 3D printing has a limitation in that the resolution is slightly lowered when the microneedle is precisely printed. To solve this issue, we optimized the SLA 3D printing conditions such as printing angle, needle height, aspect ratio, and spacing between the microneedles for high-resolution microneedle fabrication. The sharpest microneedle tip was obtained when the printing angle was adjusted to 60° in both the x and y axes. The aspect ratio and the spacing between the microneedles did not affect the output of the sharp tip. Under optimal conditions, the microneedles with 1180 ± 20 µm height, 490 ± 20 µm base, and 30.2 ± 3.4 µm tip diameter were obtained. The dissolving microneedle patch, prepared using the 3D printed microneedle as a mold, penetrated the porcine skin ex vivo. When the printing angle was 60° in the x and y axes, the area of the single stacking layer, including the microneedle tip, increased, and thus the sharp tip could be printed. A high-dimensional, side-notched arrowhead (SNA) microneedle was fabricated by applying the SLA 3D printing condition. Moreover, a letter-type microneedle patch was fabricated using the customized characteristics of 3D printing. Consequently, high-resolution and high-dimensional microneedles were successfully fabricated by adjusting the printing angle using a general SLA 3D printer, and this technology will be applied to the manufacture of drug delivery tools and various microstructures.

Evaluation of a Direct Reverse Transcription Loop-Mediated Isothermal Amplification Method without RNA Extraction (Direct RT-LAMP) for the Detection of Lymph Node Metastasis in Early Breast Cancer.

PURPOSE: Assessing lymph node metastasis, tumor-derived DNA, or tumor-derived RNA has previously been studied in place of immunohistochemical assay. Because a direct reverse transcription loop-mediated isothermal amplification method (direct RT-LAMP) has been previously developed in order to rapidly identify viruses in place of RNA extraction, our team hypothesized that a direct RT-LAMP assay can be employed as a substitute in order to detect tumor involvement of lymph nodes within breast cancer patients. MATERIALS AND METHODS: A total amount of 92 lymph nodes removed across 40 patients possessing breast cancer were collected at Kyungpook National University Chilgok Hospital between the months of November 2015 and February 2016. All samples were then evaluated and contrasted via both a direct RT-LAMP assay and routine histopathologic examination. RESULTS: The sensitivity and specificity of the direct RT-LAMP assay were 85.7% and 100%, respectively. The positive predictive value and negative predictive value were 100% and 94.4%, respectively. CONCLUSION: Direct RT-LAMP assay is capable of facilitating the detection of sentinel lymph node metastasis within breast cancer patients intraoperatively possessing an excellent sensitivity via a cost-effective and time-saving manner.

Precise Layer Control and Electronic State Modulation of a Transition Metal Dichalcogenide via Phase-Transition-Induced Growth.

Wafer-scale growth of transition metal dichalcogenides with precise control over the number of layers, and hence the electronic state is an essential technology for expanding the practical application of 2D materials. Herein, a new growth method, phase-transition-induced growth (PTG), is proposed for the precisely controlled growth of molybdenum disulfide (MoS2 ) films consisting of one to eleven layers with spatial uniformity on a 2 in. wafer. In this method, an energetically unstable amorphous MoSx Oy (a-MoSx Oy ) phase is effectively converted to a thermodynamically stable crystalline MoS2 film. The number of MoS2 layers is readily controlled layer-by-layer by controlling the amount of Mo atoms in a-MoSx Oy , which is also applicable for the growth of heteroatom-inserted MoS2 . The electronic states of intrinsic and Nb-inserted MoS2 with one and four layers grown by PTGare are analyzed based on their work functions. The work function of monolayer MoS2 effectively increases with the substitution of Nb for Mo. As the number of layers increases to four, charge screening becomes weaker, dopant ionization becomes easier, and ultimately the work function increases further. Thus, better electronic state modulation is achieved in a thicker layer, and in this respect, PTG has the advantage of enabling precise control over the film thickness.

Establishment of a near-standard two-dimensional human urine proteomic map.

A proteomic map for human urine on two-dimensional (2-D) gels has been developed. Initial studies demonstrated that the urine proteins prepared by conventional methods showed interference and poor reproducibility in 2-D electrophoresis (2-DE). To address this issue, urine samples were dialyzed to remove any interfering molecules. The dialysis of urine proteins and the concentration by lyophilization without fractionation significantly improved the reproducibility and resolution and likely represents the total urine proteins on a 2-D gel. In addition, removing albumin from urine using Affi-Gel Blue helped to identify the low-abundant proteins. Using the developed method, we prepared proteins from urine collected from healthy females and males. The large inter- and intra-subject variation in protein profiles on 2-D gels made it difficult to establish a normal human urine proteomic 2-D map. To resolve this problem, urinary proteins were prepared from the pooled urine collected from 20 healthy females and males, respectively. The established male and female urine proteomes separated on 2-D gels were almost identical except for some potential sex-dependent protein spots. We have annotated 113 different proteins on the 2-D gel by peptide mass fingerprinting (PMF). We propose that the established total urine proteome can be used for 2-DE analysis, liquid chromatography-tandem mass spectrometry (LC-MS/MS), and identification of novel disease-specific biomarkers.