Correction of Temperature Variation with Independent Water Samples to Predict Soluble Solids Content of Kiwifruit Juice Using NIR Spectroscopy.

Using the framework of aquaphotomics, we have sought to understand the changes within the water structure of kiwifruit juice occurring with changes in temperature. The study focuses on the first (1300-1600 nm) and second (870-1100 nm) overtone regions of the OH stretch of water and examines temperature differences between 20, 25, and 30 °C. Spectral data were collected using a Fourier transform-near-infrared spectrometer with 1 mm and 10 mm transmission cells for measurements in the first and second overtone region, respectively. Water wavelengths affected by temperature variation were identified. Aquagrams (water spectral patterns) highlight slightly different responses in the first and second overtone regions. The influence of increasing temperature on the peak absorbance of the juice was largely a lateral wavelength shift in the first overtone region and a vertical amplitude shift in the second overtone region of water. With the same data set, we investigated the use of external parameter orthogonalisation (EPO) and extended multiple scatter correction (EMSC) pre-processing to assist in building temperature-independent partial least square regression models for predicting soluble solids concentration (SSC) of kiwifruit juice. The interference component selected for correction was the first principal component loading measured using pure water samples taken at the same three temperatures (20, 25, and 30 °C). The results show that the EMSC method reduced SSC prediction bias from 0.77 to 0.1 °Brix in the first overtone region of water. Using the EPO method significantly reduced the prediction bias from 0.51 to 0.04 °Brix, when applying a model made at one temperature (30 °C) to measurements made at another temperature (20 °C) in the second overtone region of water.

Interactions of Linearly Polarized and Unpolarized Light on Kiwifruit Using Aquaphotomics.

Near infrared (NIR) spectroscopy is an important tool for predicting the internal qualities of fruits. Using aquaphotomics, spectral changes between linearly polarized and unpolarized light were assessed on 200 commercially grown yellow-fleshed kiwifruit (Actinidia chinensis var. chinensis 'Zesy002'). Measurements were performed on different configurations of unpeeled (intact) and peeled (cut) kiwifruit using a commercial handheld NIR instrument. Absorbance after applying standard normal variate (SNV) and second derivative Savitzky-Golay filters produced different spectral features for all configurations. An aquagram depicting all configurations suggests that linearly polarized light activated more free water states and unpolarized light activated more bound water states. At depth (≥1 mm), after several scattering events, all radiation is expected to be fully depolarized and interactions for incident polarized or unpolarized light will be similar, so any observed differences are attributable to the surface layers of the fruit. Aquagrams generated in terms of the fruit soluble solids content (SSC) were similar for all configurations, suggesting the SSC in fruit is not a contributing factor here.

Characterizing liquid turbid media by frequency-domain photon-migration spectroscopy.

We present a wavelength-tunable frequency-domain instrument for the characterization of liquid turbid media. The instrument employs a tunable titanium-sapphire laser modulated by an acousto-optic modulator. The absorption and reduced scattering coefficient of Intralipid(R) 20%, diluted to concentrations of 0.94 to 4.00%, are measured over the wavelength range 710 to 850 nm at 10-nm intervals. The standard measurement errors for the absorption and reduced scattering coefficients are 1 and 2.5%, respectively. Extrapolation to 0% Intralipid(R) concentration gives an absorption coefficient that closely follows that of water, overestimating the absorption of pure water by less than 10%. The reduced scattering coefficient is compared at 750 nm with published results and is found consistent within the experimental error. We compare the reduced scattering coefficient to an estimate based on Mie theory and find the reduced scattering coefficient underestimated the Mie theory result by about 9%.

Polarisation and wavelength selective transmission through nanohole structures with multiple grating geometry.

Excitation and localization of surface plasmon polariton modes in metal-dielectric structures can be utilized to construct nanophotonic materials and devices with tuneable optical dispersion. We present a selective polariton generator (SPG) device that demonstrates switching of light transmission based on surface plasmon antennae principles. This polarization-sensitive structure selectively generates and transports polaritons of a desired wavelength through subwavelength apertures. Two of these SPGs have been combined around a nanohole into a new, single device that allows polarization and wavelength selective switching of transmission. The multi-state operation is confirmed by experiment results.

Temperature dependence of near-infrared spectra of whole blood.

The temperature dependence (30 to 40 degrees C) of near-infrared spectra (500 to 1100 nm) of whole human blood, including red blood cells with intact physiological function, is investigated. Previous studies have focused on hemoglobin solutions, but the operation of red blood cells is critically dependent on intact cell membranes to perform normal oxygen transport and other physiological functions. Thus measurements of whole blood are more directly related to changes that occur in vivo. In addition to the response of hemoglobin to temperature in the spectra, a temperature response from water in the plasma is also detected. The temperature response of the water absorption at 960 nm is approximately ten times smaller than the temperature response of the oxyhemoglobin component in the blood at 610 nm. However, it is the most significant temperature effect between 800 and 1000 nm. This work will aid the precision and understanding of full spectrum near-infrared measurements on blood.

Measuring optical temperature coefficients of Intralipid.

The temperature sensitivities of absorption and reduced scattering coefficients in the range 700-1000 nm are determined for the liquid phantom Intralipid using spatially resolved continuous wave measurements. The measurements were conducted on a 10 L heated volume of 1% Intralipid subjected to a 40-30 degrees C cooling regime. The temperature sensitivities of the absorbance coefficients are similar to that expected for pure water. However, the reduced scattering coefficients are more sensitive than can be explained by temperature related density changes, and show an unexpected relationship with wavelength. We have also found that temperature perturbations provide a useful means to evaluate instrument model performance.

Control, communication and monitoring of intravaginal drug delivery in dairy cows.

We present the design of an electronically controlled drug delivery system. The intravaginally located device is a low-invasive platform that can measure and react inside the cow vagina while providing external control and monitoring ability. The electronics manufactured from off the shelf components occupies 16 mL of a Theratron syringe. A microcontroller reads and logs sensor data and controls a gascell. The generated gas pressure propels the syringe piston and releases the formulation. A two way radio link allows communication between other devices or a base station. Proof of principle experiments confirm variable-rate, arbitrary profile drug delivery qualified by internal sensors. A total volume of 30 mL was dispensed over a 7-day-period with a volume error of +/- 1 mL or +/- 7% for larger volumes. Delivery was controlled or overridden via the wireless link, and proximity to other devices was detected and recorded. The results suggest that temperature and activity sensing or social grouping determined via proximity can be used to detect oestrus and trigger appropriate responses.

Thermal stability of intralipid optical phantoms.

We investigated the stability of light transmission through Intralipid-based optical phantoms in the wavelength range of 400-950 nm at temperatures between 35 and 70 °C. Optical phantoms are materials commonly used to simulate the light scattering and absorption properties of biological materials. These simulations require the phantom to be optically stable. We demonstrate that the scattering properties of Intralipid remain stable at higher temperatures, varying less than 0.5%. We also present results that show this is not the case for absorption below 700 nm at 35 and 70 °C, with greater instability at 70 °C. For example, at 500 nm, the light intensity transmitted through 15 mm of Intralipid dropped 39% over 12 h. We demonstrate that oxidation of fatty acids in Intralipid could account for this effect and show, by flushing the system continuously with nitrogen gas, the instability is reduced.

Temperature-dependent optical properties of Intralipid measured with frequency-domain photon-migration spectroscopy.

We present the temperature dependence of absorption and reduced scattering coefficients of 1.8% Intralipid measured by frequency-domain photon-migration spectroscopy between 710 and 850 nm. These measurements were made in the physiologically relevant 30 to 40 degrees C temperature range. The temperature coefficients for absorption were consistent during heating and cooling and follow closely other reported results. The change in absorption coefficient at 740 nm suggests that a minimum temperature change of 4 degrees C is observable within the error limits. We found that the reduced scattering coefficient shows a hysteresis with temperature at 740 nm. The temperature coefficient for reduced scattering determined from heating cycle measurements agrees with theory and other measurements within the error limits.

Amplified reference pulse storage for low-coherence pulsed Doppler lidar.

We present a lidar concept for wind-speed measurements, in which a pulsed laser is used as the source for measurement and reference beams. A fraction of the transmitted pulse is stored in a fiber-optic ring resonator with a path length longer than the pulse. The output of the resonator is a pulse train that is used as the reference beam and can be mixed with the Doppler-shifted measurement signal. Because this reference has traveled a distance equivalent to the measurement beam's path length, low-coherence sources can be used. Inserting an erbium-doped fiber amplifier into the resonator ensures that the stored pulses do not decay in amplitude. Experiments prove that 16 reference pulses of sufficiently constant amplitude and stability can be generated. This would correspond to a measurement range of 240 m in free air over which the returned signal is sampled at equal intervals. Velocity measurements of a hard target have been carried out in the range of 1-10 m/s. The Doppler-measured velocities agree with tachometer reference measurements within +/-0.09 m/s.