Entire Dental Arch Mesial Movement after Extraction of Maxillary Right Central Incisor due to Root Fracture Treated with Temporary Anchorage Devices.

This case report describes a 19-year-old woman with skeletal Class I crowding and an unsalvageable maxillary right central incisor. She visited our clinic with the chief complaint of mobility of the maxillary right central incisor due to a traffic accident. After extraction of the maxillary right central incisor, the space was closed orthodontically. All the maxillary right teeth were moved mesially with an elastic chain attached to a palatal lever arm which was connected to palatal temporary anchorage devices (TADs). After orthodontic treatment had been completed, the maxillary right lateral incisor and peg-shaped left lateral incisor were restored with a porcelain laminate veneer. The maxillary right canine was morphologically reshaped and built up with composite resin. Consequently, esthetically ideal occlusion and functional lateral guidance with uncontacted molars were obtained. These results show that mesial movement of the entire dental arch with TADs is a useful orthodontic treatment option in patients in whom the maxillary central incisor has been extracted.

The Physiological Function of Deglutition and Swallowing in Patients With Maxillary Protrusion After Mandibular Advancement.

The objective of this study was to determine the tongue-palatal contact changes in patients with skeletal maxillary protrusion after sagittal split ramus osteotomy (SSRO) during swallowing. In this study, 15 patients with maxillary protrusion and 10 normal subjects participated. Before and 3 months after surgery, tongue-palatal contact patterns during swallowing of patients with maxillary protrusion as well as controls were evaluated by electropalatography. The electrode contact number in the alveolar, palatal, and velar parts was examined. The swallowing duration of each phase was also evaluated. In the lateral area of the velar part, incomplete electrode contact was shown at 0.3 seconds in patients with maxillary protrusion. The electrode contact number in the velar part at 0.3 seconds before tongue-palatal complete contact was significantly less in the preoperative patients compared with the controls ( P < 0.05). A small increase in the electrode contact number of the velar part was shown in the postoperative patients at 0.3 and 0.2 seconds before tongue-palatal complete contact ( P < 0.05). The pharyngeal phase duration was significantly larger in the patients with maxillary protrusion before SSRO compared with the controls ( P < 0.05). After SSRO, the pharyngeal phase duration was significantly shortened. It was shown that the tongue-palatal contact pattern during swallowing in patients with maxillary protrusion improved after orthognathic surgery, and the pharyngeal phase duration was also shortened. It is suggested that the changes in the mesiodistal mandibular position by orthognathic surgery can improve tongue posture and movement during swallowing.

Correction of Severe Skeletal Class II High Angle with Mandibular Retrusion and Gummy Smile by Double-Jaw Surgery.

This report describes the treatment of severe skeletal Class II malocclusion in a young woman with a gummy smile and pronounced lower anterior facial height. Overjet and overbite were +12.0 mm and -1.0 mm, respectively. Cephalometric analysis revealed inferior positioning of the maxilla and severe mandibular retrusion with clockwise rotation. Both the upper and lower anterior teeth showed labial inclination. Based on a diagnosis of a skeletal Class II high angle with mandibular retrusion and a gummy smile, double-jaw orthognathic surgeries for upper and lower premolar extraction were chosen to gain ideal occlusion and an improvement in the esthetic facial profile. Le Fort I osteotomy was performed to move the anterior and posterior teeth upward by 4.0 mm and achieve mandibular counterclockwise rotation. Short lingual sagittal split ramus osteotomy was performed to move the mandible forward by 3.0 mm. As a result, normal overjet and overbite were achieved together with a straight profile and a good smile. After surgery, electromyographic evaluation of anterior temporal muscle activity showed an improvement in the percentage overlapping coefficient value (a symmetric index of bilateral muscle activity) from 28.1% to 63.2% compared to at pre-treatment. The pattern of jaw movement also showed an improvement. These results suggest that orthognathic surgery in skeletal Class II cases can improve not only malocclusion and the skeletal relationship of the jaws, but also masticatory function and jaw movement.

Occlusal Trauma and Bisphosphonate-Related Osteonecrosis of the Jaw in Mice.

Osteonecrosis of the jaw (ONJ) is a serious adverse event that is associated with antiresorptive agents, and it manifests as bone exposure in the maxillofacial region. Previous clinical reports suggest that mechanical trauma would trigger ONJ in a manner that is similar to tooth extractions. To the best of our knowledge, there have been few detailed pathophysiological investigations of the mechanisms by which occlusal/mechanical trauma influences ONJ. Here, we developed a novel mouse model that exhibits ONJ following experimental hyperocclusion and nitrogen-containing bisphosphonate (N-BP) treatment. This in vivo model exhibited ONJ in alveolar bone, particularly in the mandible. Moreover, the experimental hyperocclusion induced remarkable alveolar bone resorption in both mouse mandible and maxilla, whereas N-BP treatment completely prevented alveolar bone resorption. In this study, we also modeled trauma by exposing clumps of mesenchymal stem cells (MSCs)/extracellular matrix complex to hydrostatic pressure in combination with N-BP. Hydrostatic pressure loading induced lactate dehydrogenase (LDH) release by calcified cell clumps that were differentiated from MSCs; this LDH release was enhanced by N-BP priming. These in vivo and in vitro models may contribute further insights into the effect of excessive mechanical loading on ONJ onset in patients with occlusal trauma.

An Investigation of Tongue-Palatal Contact Changes in Patients With Skeletal Mandibular Lateral Deviation After Sagittal Split Ramus Osteotomy.

ABSTRACT: This study aimed to investigate the changes in tongue-palatal contact patterns in patients with mandibular lateral deviation by electropalatography (EPG) before and after sagittal split ramus osteotomy (SSRO). Ten mandibular asymmetry patients who underwent SSRO participated in the study. Tongue-palatal contact patterns for the production of /t/ and /s/ sounds were observed using EPG before surgery and 3 months after surgery, and the changes in EPG pattern were examined. The number of electrode contacts in the 2 vertical columns of the EPG plate was calculated both in the mandibular deviation side and the nondeviation side. The EPG patterns for /t/ and /s/ showed asymmetry before surgery but became normal after surgery. Before surgery, the number of electrode contacts in the 2 vertical columns in the mandibular deviation side was significantly lower than that in the nondeviation side and the normal participants during /t/ and /s/ articulation. However, the number of electrode contacts in the deviation side significantly increased after surgery. This study demonstrated that the tongue-palatal contact patterns for /t/ and /s/ articulation shifted to the direction of mandibular deviation and improved after SSRO.

Comparison of the bone regeneration ability between stem cells from human exfoliated deciduous teeth, human dental pulp stem cells and human bone marrow mesenchymal stem cells.

Cleft lip and palate is the most common congenital anomaly in the orofacial region. Autogenous iliac bone graft, in general, has been employed for closing the bone defect at the alveolar cleft. However, such iliac bone graft provides patients with substantial surgical and psychological invasions. Consequently, development of a less invasive method has been highly anticipated. Stem cells from human exfoliated deciduous teeth (SHED) are a major candidate for playing a significant role in tissue engineering and regenerative medicine. The aim of this study was to elucidate the nature of bone regeneration by SHED as compared to that of human dental pulp stem cells (hDPSCs) and bone marrow mesenchymal stem cells (hBMSCs). The stems cells derived from pulp tissues and bone marrow were transplanted with a polylactic-coglycolic acid barrier membrane as a scaffold, for use in bone regeneration in an artificial bone defect of 4 mm in diameter in the calvaria of immunodeficient mice. Three-dimensional analysis using micro CT and histological evaluation were performed. Degree of bone regeneration with SHED relative to the bone defect was almost equivalent to that with hDPSCs and hBMSCs 12 weeks after transplantation. The ratio of new bone formation relative to the pre-created bone defect was not significantly different among groups with SHED, hDPSCs and hBMSCs. In addition, as a result of histological evaluation, SHED produced the largest osteoid and widely distributed collagen fibers compared to hDPSCs and hBMSCs groups. Thus, SHED transplantation exerted bone regeneration ability sufficient for the repair of bone defect. The present study has demonstrated that SHED is one of the best candidate as a cell source for the reconstruction of alveolar cleft due to the bone regeneration ability with less surgical invasion.

Cranial bone regeneration after cranioplasty using cryopreserved autogenous bone by a programmed freezer with a magnetic field in rats.

BACKGROUND: The purpose of this study was to develop a bone tissue bank using a programmed freezer with a magnetic field. Parietal bones were removed from rats and used for organ culture examination (non-cryopreserved, cryopreserved with a magnetic field (CAS) and cryopreserved without a magnetic field group). Next, other parietal bones were used for histological examination. The cryopreserved bones by a CAS freezer and dried bones were transplanted respectively. Control bones were replanted without cryopreservation. Animals were sacrificed at 4, 8, 12 and 24 weeks after surgery. After organ culture, the isolated osteoblasts from parietal bones which were cryopreserved by a CAS freezer can survive and proliferate as much as non-cryopreserved group. Histological examinations showed new bone formation in control and CAS group. These results suggest that bone tissue cryopreservation by CAS freezer can be successfully used for bone grafting which may be a novel option for regeneration medicine.

Autotransplantation of a Tooth Cryopreserved Over 11 Years Using a Programmed Freezer With a Magnetic Field: A Case Report.

This case report shows an autotransplantation of the lower right cryopreserved third molar into the extraction socket of the lower right first molar. Due to deep caries of the lower right first molar, the mesial root of this tooth was extracted. The patient asked to keep the distal root of the lower right first molar even if the root can survive only for a short period. So, a fixed partial denture supported by the lower right second premolar and the distal root of the lower right first molar was set. However, it was supposed that the distal root of the lower right first molar as an abutment tooth had a poor prognosis. Therefore, we also extracted the lower right third molar and cryopreserved to prepare autotransplantation if the lower right first molar has to be removed in the future. At first, the extracted third molar was frozen using a programmed freezer with a magnetic field named "Cells Alive System" (CAS) freezer, which was developed for tissue cryopreservation, and then, cryopreserved in the -150°C deep freezer. Eleven years later from the cryopreservation of the third molar, the lower right first molar showed root fracture. So, we extracted the lower right first molar and autotransplanted the cryopreserved third molar. Three years later, the autotransplanted tooth continued to be stable with healthy periodontium. The present case revealed that autotransplantation of a long-term cryopreserved tooth in a CAS freezer is a variable method to replace missing teeth.

Wisdom Tooth Autotransplantation for the Missing Maxillary Central Incisors Using a 3D-Printed Replica: A Case Report.

In this case report, we describe a 19-year-old man who underwent an autotransplantation of a lower third molar into the extracted region of his upper central incisors. Due to trauma, the patient's upper right and left central incisors had been extracted. He visited our clinic and requested to perform autotransplantation of his own teeth into the upper central incisor part because he wanted to use his natural teeth. So, we decided to extract his lower right third molar and autotransplant it into the extraction part of the upper central incisors. Immediately after extraction of the lower right third molar, the tooth was autotransplanted into the upper anterior region using a 3D-printed resin replica of the donor tooth and artificial sockets of the recipient site. Then, the root canal treatment was performed, and a temporary crown was set. Next, orthodontic treatment was done to flatten the curve of Spee. After completing the orthodontic treatment, a final prosthodontic restoration was set on the autotransplanted tooth. Four years later, the autotransplanted tooth remained stable with a healthy periodontium. This case demonstrates that if a patient has a request to use their natural teeth, autotransplantation of a wisdom tooth into the anterior region can be a useful method to replace the missing teeth.

Effect of laser engraving on shear bond strength of polyetheretherketone to indirect composite and denture-base resins.

Background/purpose: Polyetheretherketone (PEEK) is a highly sought-after thermoplastic due to its exceptional mechanical properties and biocompatibility. However, bonding PEEK to indirect composite resin (ICR) or denture-based resin (DBR) can be challenging. Laser engraving technology has shown potential to improve bonding for other materials; thus, this study aims to evaluate its effectiveness for PEEK. Materials and methods: The experiment involved preparing ingot-shaped PEEK samples, which were then categorized into four groups based on the treatment method employed: without treatment, air abrasion, sulfuric acid etching, and laser engraving (LS). Subsequently, the samples were bonded to ICR or DBR, and their shear bond strength (SBS) was tested with or without thermocycling using a universal testing machine. Furthermore, the failure mode was observed, with statistical analyses conducted to compare the results. Results: The grid-like microslit structure of LS group displayed the highest SBS for bonding PEEK to ICR or DBR (P < 0.05). During the bonding of PEEK to ICR, resin residue and penetration into the microslits were frequently observed in the LS group, indicating cohesive failure. However, when PEEK was bonded to DBR, mixture failure was frequently observed without thermocycling. After thermocycling, only the LS group showed cohesive failure, while the majority of specimens exhibited mixture failure. Conclusion: Laser engraving significantly improves the SBS between PEEK and both ICR and DBR. Furthermore, it was observed that resin had penetrated the microslits, indicating that laser engraving has great potential as a surface treatment method.

Cryopreservation of rat MSCs by use of a programmed freezer with magnetic field.

Mesenchymal stem cells (MSCs) can be used for the regeneration of various tissues and cryopreservation of MSCs is so important for regenerative medicine. The purpose of this study was to evaluate the influences of cryopreservation on MSCs by use of a programmed freezer with a magnetic field (CAS freezer). MSCs were isolated from bone marrow of rat femora. The cells were frozen by a CAS freezer with 10% dimethyl sulfoxide (Me2SO) and cryopreserved for 7 days at a temperature of -150 °C. Immediately after thawing, the number of survived cells was counted. The cell proliferation also examined after 48 h culture. Next, MSCs were frozen by two different freezers; CAS freezer and a conventional programmed freezer without magnetic field. Then, osteogenic and adipogenic differentiations of cryopreserved cells were examined. As a result, survival and proliferation rates of MSCs were significantly higher in CAS freezer than in the non-magnetic freezer. Alizarin positive reaction, large amount of calcium quantification, and greater alkaline phosphatase activity were shown in both the non-cryopreserved and CAS groups after osteogenic differentiation. Moreover, Oil Red O staining positive reaction and high amount of PPARγ and FABP4 mRNAs were shown in both the non-cryopreserved and CAS groups after adipogenic differentiation. From these findings, it is shown that a CAS freezer can maintain high survival and proliferation rates of MSCs and maintain both adipogenic and osteogenic differentiation abilities. It is thus concluded that CAS freezer is available for cryopreservation of MSCs, which can be applied to various tissue regeneration.

Open bite as a risk factor for orthodontic root resorption.

The purpose of the present study was to clarify the prevalence and degree of root resorption induced by orthodontic treatment in patients with and without open bite. One hundred and eleven patients treated with multibracket appliances were retrospectively selected from the patients and divided into non-open bite (NOB) and open bite (OB) groups. The severity of root resorption and the root shape were classified into five groups on periapical radiographs before and after treatment. Moreover, only in the OB group, all teeth were sub-divided into functional and hypofunctional ones that are occluding and non-occluding. As the results of multiple linear regression analysis of patient characteristics and clinical variables with the number of overall root resorption, the independent variables that were found to contribute significantly to root resorption were bite and abnormal root shape. The prevalences of root resorption evaluated in the number of patients were significantly higher in OB group than in NOB group, and those in the number of teeth were significantly higher in OB group than in NOB group, in particular anterior and premolar teeth. The prevalence of resorbed teeth with abnormal root shapes was also significantly higher in OB group than in NOB group. On the other hand, in OB group, the prevalences of root resorption and teeth with abnormal root shape were significantly greater in hypofunctional teeth than in normal functional teeth. There are more teeth with root resorption and abnormal root shape in open bite cases than in normal bite cases, and more teeth with abnormal root shapes and root resorption in hypofunctional teeth than in functional teeth.

Camouflage Correction of Skeletal Class III Severe Open Bite with Tooth Ankylosis Treated by Temporary Anchorage Devices: A Case Report.

Tooth ankylosis is a disorder characterized by the fusion of tooth and alveolar bone. This case report describes the treatment of a severe open bite due to tooth ankylosis. A 14-year-old female patient with a chief complaint of masticatory dysfunction was diagnosed with skeletal Class III severe anterior open bite and tooth ankylosis. She visited our university hospital with a chief complaint of an anterior open bite. After the surgical luxation of the ankylosed maxillary right central incisor, the tooth was orthodontically retracted using a nickel-titanium wire. The right mandibular lateral incisor and canine were luxated and retracted using intermaxillary elastics from a temporary anchorage device (TAD), which was inserted in the opposite jaw. During the treatment, skeletal Class III malocclusion deteriorated due to anterior growth of the mandible. Therefore, TADs were inserted into the retromolar pad on both sides of the mandible and retracted into the mandibular dental arch. Although the mandibular right canine was luxated several times, it could not be brought to the occlusal line, and was thus extracted; the extraction space was replaced with a prosthesis. Consequently, a normal overjet and overbite with a straight profile were achieved. Extrusion of ankylosed teeth by intermaxillary elastics from a TAD is a valid treatment option for patients with severe open bites.

Association between root resorption incident to orthodontic treatment and treatment factors.

The purpose of this study was to clarify the prevalence and degree of root resorption induced by orthodontic treatment in association with treatment factors. The files of 243 patients (72 males and 171 females) aged 9-51 years were randomly selected from subjects treated with multi-bracket appliances. The severity of root resorption was classified into five categories on radiographs taken before and after treatment. The subjects were divided into extraction (n = 113 patients, 2805 teeth) and non-extraction (n = 130 patients, 3616 teeth) groups and surgical (n = 56 patients, 1503 teeth) and non-surgical treatment (n = 187 patients, 4918 teeth) groups. These subjects were also divided into two or three groups based on the duration of multiloop edgewise archwire (MEAW) treatment, elastic use, and total treatment time: 0 month (T1; n = 184 patients, 4831 teeth), range 1-6 months (T2; n = 37 patients, 994 teeth), more than 6 months (T3; n = 22 patients, 596 teeth); range 0-6 months (n = 114 patients, 3016 teeth) more than 6 months (n = 129 patients, 3405 teeth); range 1-30 months (n = 148 patients, 3913 teeth) and more than 30 months (n = 95 patients, 2508 teeth). The prevalence of overall and severe root resorption evaluated by the number of subjects and teeth was compared with a chi-square test. A Student's t-test for unpaired data was used to determine any statistically significant differences. The prevalence of severe root resorption based on the number of teeth was significantly higher in the group with extractions (P < 0.01). Longer use of a MEAW appliance and elastics also produced a significantly higher prevalence of root resorption (P < 0.05). On the other hand, the prevalence of severe root resorption was not significantly different between the subjects treated with or without surgery, but there was a significant increase when treatment time was prolonged (P < 0.05). A significant difference was found in the amount of root movement of the upper central incisors and the distance from their root apices to the cortical bone surface (P < 0.05). These are regarded as essential factors in the onset of root resorption. These results indicate that orthodontic treatment with extractions, long-term use of a MEAW appliance and elastics, treatment time, and distance of tooth movement are risk factors for severe root resorption.

Lansoprazole and zoledronate delays hard tissue healing of tooth extraction sockets in dexamethasone-treated mice.

Proton pump inhibitors (PPIs) are among the most commonly prescribed medicines for the management of acid-related gastrointestinal diseases. Osteonecrosis of the jaw (ONJ) is a serious adverse event that is associated with the use of antiresorptive and antiangiogenic agents. According to previous clinical reports, the use of PPIs contributes to the pathogenesis of severe ONJ that requires surgery. Here, we investigated the effects of lansoprazole (LP) or LP in combination with zoledronate (ZOL) on ONJ development in mice. C57BL/6J mice were administered ZOL (125 µg/kg intravenously, twice weekly) and/or LP (10 mg/kg intraperitoneally; 3 weeks of 3 consecutive days followed by 1 day off). One week after initiation of the study, the first molar was atraumatically extracted. Concurrently with ZOL administration, dexamethasone (Dex) was administered (5 mg/kg intraperitoneally, twice weekly). Micro-computed tomography and histological evaluation were performed to characterize femoral structures, tooth extraction sockets, and osteonecrosis areas. The results showed that ZOL/Dex significantly increased bone mass compared to saline/Dex, while the simultaneous administration of LP and ZOL/Dex diminished the ZOL-induced enhancement of bone mass. In the alveolar bone around the tooth extraction socket, necrotic bone was significantly increased in the LP/Dex group compared to the saline/Dex group. However, no signs of more severe ONJ-like lesions were observed following combined administration of LP and ZOL/Dex, other than an increase in the number of non-attached TRAP-positive cells. Our findings in a mouse model suggest that LP use can be a risk factor for the development of ONJ.

Influence of dental abrasives on surface roughness, gloss, and color of titanium.

PURPOSE: The influence of three dental abrasives on the surface roughness, glossiness, and color of titanium (Ti) after mechanical polishing was investigated. METHODS: The specimens were divided into groups, referred to as SM, SR, and TP, to distinguish the different polishing processes. SM: rubber polishing using a rubber point containing SiC abrasive particles at 20,000 rpm, followed by gloss polishing; SR: rubber polishing using a rubber point containing Al2O3 abrasive particles at 20,000 rpm, followed by gloss polishing; TP: rubber polishing using a rubber point containing TiO2 abrasive particles at 6,000 rpm, followed by gloss polishing. Gloss polishing was carried out at 10,000 rpm using a leather buffing wheel. Measurements to evaluate the surface conditions of Ti were performed after each polishing process. RESULTS: There were no significant differences in the Ra and glossiness values between the SM and TP groups; these specimens were not as smooth and glossy as the SR group. The SM group showed relatively high values of lightness and chroma after gloss polishing. CONCLUSION: Rubber polishing with abrasives containing SiC or TiO2 particles before gloss polishing did not achieve appropriate surface conditions on Ti.

Functional regulation of osteoblastic MC3T3E-1 cells by hyperbaric oxygen treatment.

OBJECTIVES: The purpose of the present study was to examine the influence of hyperbaric oxygen (HBO) on the function of osteoblastic MC3T3-E1 cells. DESIGN: Murine MC3T3-E1 cells were exposed to HBO treatment (at 2.5 absolute atmospheric pressure with 100% oxygen, 90 min per day) for 28 days. Alkaline phosphatase (ALP) staining, activity, and calcium (Ca) content were measured. Gene expression of vascular endothelial growth factor (VEGF), basic fibroblast growth factor (bFGF), hypoxia-inducible factor-1α (HIF-1α), type 1 collagen (COL1), and osteocalcin (OCN) was assessed using real-time quantitative polymerase chain reaction after a single HBO exposure for 1.5, 6, and 12 h. Furthermore, adenosine triphosphate (ATP) levels were measured using a luminescent cell viability assay. RESULTS: ALP activity and Ca content were higher in the HBO group compared to those in the control group. Gene expression of bFGF, COL1, and OCN was upregulated in the HBO group; however, that of VEGF and HIF-1α significantly decreased in the HBO group in comparison with that in the control group. ATP levels were significantly higher in the HBO group compared to those in the control group. CONCLUSIONS: These findings suggest that HBO accelerates bone formation by increasing the ATP levels of osteoblasts, and bFGF can act as a substitute for VEGF in vascularization by HBO application.

Effects of dimensions of laser-milled grid-like microslits on shear bond strength between porcelain or indirect composite resin and zirconia.

PURPOSE: Zirconia cores and frameworks are widely used in restorative dentistry. Although these structures are veneered with porcelain for esthetic reasons, the use of indirect composite resins (ICRs) is expected to increase in the future. The purpose of this study was to investigate the effects of microslits of different dimensions formed by Nd:YVO4 laser machining on the bond strength between two types of zirconia (3 mol% yttria-partially stabilized zirconia (Y-TZP) and ceria-partially stabilized zirconia/alumina nanocomposite (Ce-TZP/A)) and porcelain or an ICR. METHODS: The zirconia disks were assigned as follows: 1) blasted with alumina particles (AB) and 2-4) surface machined with gridded microslits with a width, pitch, and depth of 50, 75, or 100 µm (MS50, MS75, and MS100, respectively). After the bonding of the veneering materials to the disks, half of the specimens veneered with the ICR were subjected to thermocycling (4-60°C, 20000 cycles). All the specimens were subsequently shear tested (n = 10/group). RESULTS: There was no significant difference between the groups of the disks bonded to porcelain. On the other hand, for the disks bonded to the ICR, the bond strengths of the MS groups after thermocycling were statistically higher than that of the AB group. However, there was no significant difference in the bond strengths of the disks with different microslits. CONCLUSION: Within the study limitations, it can be concluded that, for porcelain, the design of the mechanical retentive structure must be modified. However, for the investigated ICR, a simple gridded pattern can improve the bond strength with zirconia.

Changes in cortical bone mineralization in the mouse mandible with regenerated condyle.

The objective of this study was to evaluate the effects of condylectomy and of a functional appliance on the mineral content, density, and area of the mandibular cortical bone in a growing mouse model. In the condylectomy group, a unilateral condylectomy was performed on the right side of the mouse mandible. In the condylectomy + appliance group, a functional appliance was used to reposition the mandible after the unilateral condylectomy. All mice were killed 4 wk after surgery. Each mandible was then subjected to analyses of cortical bone mineral content (CRT_CNT), cortical bone density (CRT_DEN), and cortical bone area (CRT_A) by peripheral quantitative computed tomography (pQCT). The CRT_CNT, CRT_DEN, and CRT_A values were significantly lower in the condylectomized mandible (right side) than in the non-condylectomized mandible (left side). However, in the condylectomized animals in which a functional appliance was used, the CRT_CNT, CRT_DEN, and CRT_A values became higher than those in the mice treated with condylectomy alone. No significant differences were found in the CRT_CNT, CRT_DEN, and CRT_A between non-condylectomized (left side) mandibles, mandibles treated with condylectomy + functional appliance (right side), and control mandibles. It was thus shown that a functional appliance used to reposition the condylectomized mandible forward in a symmetric position induced improvement of the cortical bone in a mouse model in terms of cortical bone mineral content, density, and area.

In-vitro and in-vivo study of periodontal ligament cryopreserved with a magnetic field.

INTRODUCTION: The purpose of this study was to examine the effect of a new cryopreservation method with a magnetic field on periodontal regeneration in vitro and in vivo. METHODS: Human periodontal ligament cells were frozen in 10% dimethyl sulfoxide by using a programmed freezer with a magnetic field. Cells were cryopreserved for 3 days at -150°C. Immediately after thawing, collagen type I and alkaline phosphatase gene expression were determined by real-time polymerase chain reaction. Incisors were extracted from 15-week-old Wistar rats and cryopreserved or dried for 3 days. Then the incisors were replanted into the same sockets. Ninety days after transplantation, they were observed under light microscopy. RESULTS: There was no difference in the messenger RNA expression of collagen type I between the cryopreserved and the control groups. The expression of alkaline phosphatase messenger RNA in the cryopreserved group was slightly decreased compared with the control group. There was no progressive root resorption in the teeth that were replanted immediately (control group) or cryopreserved. However, there was widespread root resorption and ankylosis in the dried teeth. CONCLUSIONS: These results show that a magnetic field programmed freezer can be successfully used for cryopreservation of teeth.