Efficacy of Virucidal Treatments against Poliovirus Type 1 Deposited on Stainless-Steel Carriers.

Safe containment of infectious poliovirus (PV) within Poliovirus-Essential Facilities (PEFs) will require the implementation of reliable PV-inactivation approaches for decontaminating work surfaces. Such approaches should be demonstrated empirically to display adequate efficacy at the use temperature, and the contact times required should be characterized to ensure efficacy. Such efficacy is judged by the ability of the inactivation approach to completely inactivate any PV deposited, with the demonstrated total log10 reduction in PV titer being as high as empirically achievable. We screened several approaches for their efficacy in inactivating wild-type PV type 1 Chat strain experimentally deposited on stainless-steel carriers at room temperature. On the basis of the results, we selected two approaches (5000 ppm sodium hypochlorite in water and 95% v/v ethanol in water) for further characterization for repeatability of efficacy (log10 reduction in PV titer) and time kinetics of inactivation. We now report that both PV-inactivation approaches, which should be readily available to all PEF laboratories globally, fulfill the expectations expressed above, with 5000 ppm sodium hypochlorite reproducibly causing ≥5.38 log10 inactivation and 95% ethanol reproducibly causing ≥4.46 log10 inactivation of PV on stainless-steel surfaces within a 5 min contact time at room temperature.

Differing Susceptibilities to Certain Microbicidal Chemistries among Three Representative Enveloped Viruses.

Three lipid-enveloped viruses (bovine viral diarrhea virus [BVDV], vaccinia virus, and severe acute respiratory syndrome coronavirus 2 [SARS-CoV-2]) were evaluated in side-by-side liquid inactivation efficacy studies of low pH (3.0 to 3.1) treatment and of the non-formulated microbicidal actives sodium hypochlorite (100 ppm), ethanol (70%), quaternary ammonium compound BTC® 835 (100 ppm), and peracetic acid (100 ppm). Low pH was evaluated at 10 and 60 min contact times, and the microbicides were evaluated at 1 min contact time at room temperature per the ASTM E1052 standard. In each case, 5% animal serum was included in the viral inoculum as a challenge soil load. The three viruses displayed similar susceptibility to sodium hypochlorite and ethanol, with complete inactivation resulting. Significant differences in susceptibility to BTC® 835 and peracetic acid were identified, with the ordering of the three viruses for susceptibility to BTC® 835 being SARS-CoV-2 > vaccinia virus = BVDV, and the ordering for peracetic acid being vaccinia virus > SARS-CoV-2 > BVDV. The ordering for susceptibility to low pH treatment (60 min contact time) was vaccinia virus > SARS-CoV-2 > BVDV. Not all enveloped viruses display equivalent susceptibilities to inactivation approaches. For the chemistries evaluated here, BVDV appears to represent a worst-case enveloped virus.

Microbicidal actives with virucidal efficacy against SARS-CoV-2 and other beta- and alpha-coronaviruses and implications for future emerging coronaviruses and other enveloped viruses.

Mitigating the risk of acquiring coronaviruses including SARS-CoV-2 requires awareness of the survival of virus on high-touch environmental surfaces (HITES) and skin, and frequent use of targeted microbicides with demonstrated efficacy. The data on stability of infectious SARS-CoV-2 on surfaces and in suspension have been put into perspective, as these inform the need for hygiene. We evaluated the efficacies of formulated microbicidal actives against alpha- and beta-coronaviruses, including SARS-CoV-2. The coronaviruses SARS-CoV, SARS-CoV-2, human coronavirus 229E, murine hepatitis virus-1, or MERS-CoV were deposited on prototypic HITES or spiked into liquid matrices along with organic soil loads. Alcohol-, quaternary ammonium compound-, hydrochloric acid-, organic acid-, p-chloro-m-xylenol-, and sodium hypochlorite-based microbicidal formulations were evaluated per ASTM International and EN standard methodologies. All evaluated formulated microbicides inactivated SARS-CoV-2 and other coronaviruses in suspension or on prototypic HITES. Virucidal efficacies (≥ 3 to ≥ 6 log10 reduction) were displayed within 30 s to 5 min. The virucidal efficacy of a variety of commercially available formulated microbicides against SARS-CoV-2 and other coronaviruses was confirmed. These microbicides should be useful for targeted surface and hand hygiene and disinfection of liquids, as part of infection prevention and control for SARS-CoV-2 and emerging mutational variants, and other emerging enveloped viruses.