Analyzing working time and efficient caries removal using a novel bioactive caries detecting dye and air polisher prophy for caries excavation: randomised clinical trial.

OBJECTIVES: This study aims to analyze the working time consumed during caries excavation and pain perception while using a novel Bioactive caries-detecting dye solution (BCD), an Air Polisher Prophy and a combination. MATERIALS AND METHODS: Four groups (in each group, n = 20 permanent teeth) were selected from 60 people between 17 and 40 years of age. The study included teeth with occlusal dentinal caries in the molars with cavity entrance sizes of less than 2 mm (clinically and radiographically). Randomization software was used to assign patients to various groups. Group A: Conventional Rotary Drilling, Group B: BCD + Mechanical Excavation (Spoon Excavator), Group C: Air Polisher Prophy, and Group D: BCD + Air Polisher Prophy 0.5 mL BCD was applied with a micro brush to the carious tooth surface for 40 s in groups B and D. After that, radiographs were performed to see if the radiopaque extension was visible. For mechanical caries extraction, a spoon excavator was used for group B, and an air polisher prophy was employed for group D. For mechanical caries extraction, a spoon excavator was utilized for group B. An air polisher prophy was employed for group D. Multiple applications of the BCD were used in the event of residual caries. Working time and pain experienced during caries excavation were registered using the Verbal Pain Scale (VPS) (score 0-4), and caries removal was clinically graded using the modified Scale (score 0-5). RESULTS: The time taken was Group A, Group D, Group B, and Group C, according to statistical analysis using ANOVA and the Post Hoc Test (275.02, 403.8, 461.98, 615.41 s, respectively). Group A had the highest mean VPS (1.85), whereas Group B had the most minor pain (0.6), followed by Group D (1.2) and Group C (0.6). (1.45). Group C (2.35), followed by groups D (1.75), B (1.30), and A (1.30), had ineffective caries eradication (0.90). (p < 0.05). CONCLUSIONS: compared to group C, groups B and D took less time and had less/no pain while excavating caries. Compared to traditional mechanized caries removal methods, the chemo-chemical BCD can diagnose and aid in successful caries removal with minimal pain. CLINICAL RELEVANCE: The outcomes of the present study demonstrated that the chemo-chemical bioactive caries detecting dye solution has the potential to identify and help in effective caries removal before mechanized caries removal methods.

Classifying the internal anatomy of anterior teeth in the Yemeni population using two systems: a retrospective CBCT study.

A precursor for effective root canal treatment (RCT) is a complete understanding of the internal anatomy of teeth. In this study, the authors aimed to classify the root canal morphology of anterior teeth in the Yemeni population and identify gender-based variations among them. In addition, the symmetry among adjacent quadrants was also evaluated. Cone beam computed tomography (CBCT) scans of 2935 anterior teeth, 1502 maxillary, and 1433 mandibular were analyzed for root canal morphology and symmetry. Comparison between groups and among different genders was done using the Chi-square test. All the maxillary teeth were single-rooted and had a predominantly 1TN1 (Vertucci Type I) canal morphology. In addition to 1TN1, the presence of 1TN1-2-1 (Vertucci type III) and 1TN1-2-1-2-1 (not classified NC according to Vertucci) morphologies were noticed in the maxillary canines. Among the mandibular anteriors, the canal morphologies identified include 1TN1 in majority of the scans followed by 1TN2-1 (Vertucci II), 1TN1-2-1, 1TN1-2 (Vertucci V), 1TN1-2-1-2 (Vertucci VII) was seen only in incisors and newer canal types like 1TN2-1-2-1 (NC Vertucci) and 1TN1-2-1-2-1 (NC Vertucci) was seen in canines and lateral incisors. Two roots were only seen in the mandibular canines and classified as 2TN1-2 (NC Vertucci). Variations in root and root canal morphologies were seen among both genders. However, the results were not significant. All the maxillary teeth except 0.8% were bilaterally symmetrical. In mandible, symmetry ranged between 84.5 and 86.5%. In conclusion, single-rooted teeth with 1TN1 classification are most commonly seen in all the anterior teeth. Gender-based differences were non-significant, and bilateral symmetry was high. Ahmed et al. classification could precisely represent the root canal morphology in two rooted teeth.

Micro computed tomography (Micro-CT) characterization of root and root canal morphology of mandibular first premolars: a systematic review and meta-analysis.

INTRODUCTION: Mandibular first premolars are familiar with their varied root canal morphology, causing difficulties and challenges for successful endodontic procedures. This systematic review and meta-analysis aim to study the characterization of root and canal morphology of the first mandibular premolar using micro-computed tomography. METHODOLOGY: The literature search was conducted using electronic web databases like PubMed, Scopus, ScienceDirect and Cochrane with the chosen MeSH key words and data was retrieved until May 2023. Further to perform the statistical analysis, R v 4.3.1 software with "meta", 'metafor" "metaviz" " ggplot2" package was used, and results were represented by odds ratios (OR) and the percentage of forest plots along a 95 per cent confidence interval (CI). RESULTS: The total number of studies meeting the inclusion criteria was 13; these studies were conducted on mandibular first premolar using Micro-CT; the total sample size was 1817. To scan the sample, an X-ray micro-focus CT system (Siemens Inveon CT, Erlangen, Germany) was used in four studies and seven different machines were used in the respective studies. Mimics 10.01 software (Materialize, Leuven, Belgium) and NRecon v.1.6.9 software (Bruker, Kontich, Belgium) were commonly operated. The minimum and maximum voxel size ranges between 11.94 and 50 µm. Vertucci's classification was frequently used (9), while one study applied Ahmed et al. and Vertucci's classification. CONCLUSION: This systematic review provides essential information about the root and canal configurations, radicular grooves, accessory canals, and apical foramina through Micro-CT, aiming to improve the accuracy of endodontic treatment and help practitioners.

Volumetric analysis after caries excavation with caries detecting dyes and chemomechanical caries removal agents using 3D scanner-a randomised clinical trial.

AIM: This research aimed to use an extra-oral 3D scanner for conducting volumetric analysis after caries excavation using caries-detecting dyes and chemomechanical caries removal agents in individuals with occlusal and proximal carious lesions. METHODS: Patients with occlusal (A1, A2, A3) and proximal carious lesions (B1, B2, B3) were treated with the conventional rotary technique, caries detecting dyes (CDD) and chemomechanical caries removal (CMCR) method on 90 teeth (n = 45 for each). Group A1, B1: Excavation was performed using diamond points. Group A2, B2: CDD (Sable Seek™ caries indicator, Ultradent) was applied and left for 10 s, and then the cavity was rinsed and dried. For caries removal, diamond points or excavators were used. Group A3 and B3: BRIX3000 papain gel was applied with a micro-brush for 20 s and was activated for 2 min, and then the carious tissue was removed with a sharp spoon excavator. Post-excavation cavity volume analysis was performed using a 3D scanner. The time required and the verbal pain score (VPS) for pain were scored during excavation. Post-restoration evaluation was performed at 1, 3, and 6 months FDI (Federation Dentaire Internationale) criteria. RESULTS: Comparison of age, time and volume with study groups were made using Independent Sample' t' test and one-way analysis of variance (ANOVA) for two and more than two groups, respectively. Using Cohen's Kappa Statistics, evaluators 1 and 2 agreed on caries removal status aesthetic, functional and biological properties at different follow-ups. The chi-square test revealed that the rotary groups [A1(2.5 ± 0.4 min) B1(4.0 ± 0.4 min)] had significantly less (p = 0.000) mean procedural time than CDD [A2(4.5 ± 0.4 min) B2(5.7 ± 0.4 min)] and CMCR [A3(5.4 ± 0.7 min) B3(6.2 ± 0.6 min)] groups. The CMCR group showed better patient acceptance and less pain during caries excavation than the rotary and CDD groups. CMCR group showed significantly less mean caries excavated volume(p = 0.000). Evaluation of restoration after 1-, 3-, and 6-month intervals was acceptable for all the groups. CONCLUSION: Brix3000 helps effectively remove denatured teeth with less pain or sensitivity. The time required for caries removal was lowest in the rotary method and highest in the brix3000 group, while the volume of caries removed was the lowest for brix3000 and highest for the rotary group.

Evaluation of mechanical properties of anatomically customized fiber posts using E-glass short fiber-reinforced composite to restore weakened endodontically treated premolars.

OBJECTIVE: This study was conducted to assess the influence of combining different forms of fiber-reinforced composites (FRC) on the mechanical behavior and bond strength of compromised endodontically treated teeth (ETT). MATERIALS AND METHODS: Eighty extracted human premolar teeth were randomly divided into five experimental groups according to the type of intra-radicular restoration and the canal preparation design which was either non-flared (Group 1), flared (Groups 2-5), closed-apex (Groups 1,3,5) or open-apex (Groups 2,4). Standard prefabricated fiber posts were used as intra-radicular restoration for Groups 1-3 while Groups 4-5 were restored with anatomically customized relined fiber posts. After composite core fabrication, all samples were sent for an artificial aging process. Fracture resistance and push-out bond strength tests were then carried out through a universal testing machine followed by mode of failure analysis via a stereomicroscope and scanning electron microscope. RESULTS: Pairwise Log-Rank comparisons revealed that the survival rate of Group 2 and Group 3 was significantly lower than all other groups after artificial aging. The highest fracture resistance value (1796 N) was recorded in Group 5 and was significantly higher than that of the other groups (p < 0.05), while Group 2 exhibited the lowest fracture resistance (758 N), which was significantly lower compared to the other groups. Group 5 and Group 4 demonstrated a significantly higher push-out bond strength, at all root thirds, than Group 3, Group 2, and Group 1 (p < 0.05). The most frequently observed failure mode in the tested groups occurred between the resin cement and radicular dentin. CONCLUSION: The use of short fiber-reinforced composite (SFRC) to reline the prefabricated FRC post has been proven to have superior fracture resistance with favorable failure patterns and increased push-out bond strength values compared to standard prefabricated FRC posts.

Exploring age and gender variations in root canal morphology of maxillary premolars in Saudi sub population: a cross-sectional CBCT study.

BACKGROUND: In complex teeth like maxillary premolars, endodontic treatment success depends on a complete comprehension of root canal anatomy. The research on mandibular premolars' root canal anatomy has been extensive and well-documented in existing literature. However, there appears to be a notable gap in available data concerning the root canal anatomy of maxillary premolars. This study aimed to explore the root canal morphology of maxillary premolars using cone-beam computed tomography (CBCT) imaging, considering age and gender variations. METHODS: From 500 patient CBCT scans, 787 maxillary premolar teeth were evaluated. The sample was divided by gender and age (10-20, 21-30, 31-40, 41-50, 51-60, and 61 years and older). Ahmed et al. classification system was used to record root canal morphology. RESULTS: The most frequent classifications for right maxillary 1st premolars were 2MPM1 B1 L1 (39.03%) and 1MPM1 (2.81%), while the most frequent classifications for right maxillary 2nd premolars were 2MPM1 B1 L1 (39.08%) and 1MPM1 (17.85%). Most of the premolars typically had two roots (left maxillary first premolars: 81.5%, left maxillary second premolars: 82.7%, right maxillary first premolars: 74.4%, right maxillary second premolars: 75.7%). Left and right maxillary 1st premolars for classes 1MPM1 and 1MPM1-2-1 showed significant gender differences. For classifications 1MPM1 and 1MPM1-2-1, age-related changes were seen in the left and right maxillary first premolars. CONCLUSION: This study provides novel insights into the root canal anatomy of maxillary premolars within the Saudi population, addressing a notable gap in the literature specific to this demographic. Through CBCT imaging and analysis of large sample sizes, the complex and diverse nature of root canal morphology in these teeth among Saudi individuals is elucidated. The findings underscore the importance of CBCT imaging in precise treatment planning and decision-making tailored to the Saudi population. Consideration of age and gender-related variations further enhances understanding and aids in personalized endodontic interventions within this demographic.

Assessment of the root and canal morphology in the permanent dentition of Saudi Arabian population using cone beam computed and micro-computed tomography - a systematic review.

INTRODUCTION: Root canal treatment procedures require a thorough understanding of root and canal anatomy. The purpose of this systematic review was to examine the morphological differences of teeth root and their canals assessed using cone-beam computed and micro-computed tomography in Saudi Arabian population. METHODOLOGY: An electronic search was conducted in PubMed / Medline, Scopus, Google Scholar, and Web of Science databases until January 2023 to retrieve related studies. "Root canal morphology," "Saudi Arabia," "Micro-CT," and "cone-beam computed tomography" were used as keywords. A modified version of previously published risk of bias assessment tool was used to determine the quality assessment of included studies. RESULTS: The literature search revealed 47 studies that matched the criteria for inclusion, out of which 44 studies used cone beam computed tomography (CBCT) and three were micro-computed tomography (micro-CT) studies. According to the modified version of risk of bias assessment tool, the studies were categorized as low, moderate, and high risk of bias. A total of 47,612 samples were included which comprised of either maxillary teeth (5,412), or mandibular teeth (20,572), and mixed teeth (21,327). 265 samples were used in micro-CT studies while 47,347 teeth samples were used in CBCT studies. Among the CBCT studies, except for three, all the studies were retrospective studies. Frequently used imaging machine and software were 3D Accuitomo 170 and Morita's i-Dixel 3D imaging software respectively. Minimum and maximum voxel sizes were 75 and 300 µm, Vertucci's classification was mostly used to classify the root canal morphology of the teeth. The included micro-CT studies were in-vitro studies where SkyScan 1172 X-ray scanner was the imaging machine with pixel size ranging between 13.4 and 27.4 µm. Vertucci, Ahmed et al. and Pomeranz et al. classifications were applied to classify the root canal morphology. CONCLUSION: This systematic review revealed wide variations in root and canal morphology of Saudi population using high resolution imaging techniques. Clinicians should be aware of the common and unusual root and canal anatomy before commencing root canal treatment. Future micro-CT studies are needed to provide additional qualitative and quantitative data presentations.

Dental Luting Cements: An Updated Comprehensive Review.

The cementation of indirect restoration is one of the most important steps in prosthetic and restorative dentistry. Cementation aims to bond the prosthetic restoration to the prepared enamel or enamel and dentine. Successful cementation protocols prevent biofilm formation at the margin between tooth and restoration and minimize mechanical and biological complications. With the advancements in dental cements, they have been modified to be versatile in terms of handling, curing, and bond strengths. This review presents updates on dental cements, focusing on the composition, properties, advantages, limitations, and indications of the various cements available. Currently, dental restorations are made from various biomaterials, and depending on each clinical case, an appropriate luting material will be selected. There is no luting material that can be universally used. Therefore, it is important to distinguish the physical, mechanical, and biological properties of luting materials in order to identify the best options for each case. Nowadays, the most commonly used dental cements are glass-ionomer and resin cement. The type, shade, thickness of resin cement and the shade of the ceramic, all together, have a tangible influence on the final restoration color. Surface treatments of the restoration increase the microtensile bond strength. Hence, the proper surface treatment protocol of both the substrate and restoration surfaces is needed before cementation. Additionally, the manufacturer's instructions for the thin cement-layer thickness are important for the long-term success of the restoration.

Evaluation of root and canal morphology of mandibular premolar amongst Saudi subpopulation using the new system of classification: a CBCT study.

BACKGROUND: The clinician should have complete knowledge of the normal anatomy of the root as well as complexities in the root canal configuration for a better outcome, as missed or improper handling of the canal system can lead to the failure of an entire endodontic procedure. The present study aims to assess the morphology of roots and canals in permanent mandibular premolars in the Saudi subpopulation with a new classification system. METHODS: The present study includes 1230 mandibular premolars (645 first premolars and 585-second premolars) from 500 CBCT images of the patients, including retrospective data. iCAT scanner system (Imaging Sciences International, Hatfield, PA, USA) was used to obtain the images; scanning of 8 × 8 cm images was performed at 120 KVp and 5-7 mA with a voxel size of 0.2 mm. The new method of classification presented by Ahmed et al. 2017 was used to record and classify the root canal morphology, followed by recording the differences regarding the age and gender of the patients. Comparison of canal morphology in lower permanent premolars and its association with gender and age of the patients was done by Chi-square test/ Fisher exact test; the significance level was set at 5% (p ≤ 0.05). RESULTS: The left mandibular 1st and 2nd premolars with one root were 47.31%, with two roots were 2.19%. However, three roots (0.24%) and C-shaped canals (0.24%) were reported only in the left mandibular 2nd premolar. The right mandibular 1st and 2nd premolars with one root were 47.56%, with two roots were 2.03%. The overall percentage of the number of roots and canals in the first and second premolars 1 PM 1 (88.38%), 2 PM 1 B 1 L 1 (3.5%), 2 PM B 1 L 1 (0.65%), 1 PM 1-2-1 (3.08%), 1 PM 1-2 (3.17%), 1 PM 1-2-1-2 (0.24%), 3 PMMB 1 DB 1 L1 (0.48%). However, the C-shaped canals (0.40%) were reported in right and left mandibular second premolars. No statistically significant difference was reported between mandibular premolars and gender. A statistically significant difference was reported between mandibular premolars and the age of the study subjects. CONCLUSION: Type I (1 TN 1) was the major root canal configuration in permanent mandibular premolars, which was higher among males. The CBCT imaging provides thorough details about the root canal morphology of lower premolars. These findings could support diagnosis, decision-making, and root canal treatment, for dental professionals.

Assessment of oral health knowledge, literacy, and attitude among schoolteachers towards oral health - A cross-sectional study.

BACKGROUND: To accomplish the purpose of health education and health promotion programs, schools are the most effective place for delivering health information to children. The main purpose of our research was to inform, gather evidence and contribute to developing knowledge regarding the OHL, knowledge, and attitude among school teachers towards oral health in Najran region of Saudi Arabia. METHODS: A questionnaire-based cross-sectional study was conducted in Najran region of Saudi Arabia for 6 months. A stratified cluster random sampling of 252 teachers was taken to represent all the teachers of Najran region of Saudi Arabia. The questionnaire contains 2 parts, sociodemographic part that include age, gender, education, teaching level, and income of the participants. The second part contains 25 items that assess the OHL (HelD-14 questions), knowledge (6 questions), and attitude (5 questions) of the participants. SPSS software version 26 was used to enter and analyze the data (IBM SPSS, Chicago, IL, USA software version 26.0). Multiple Logistic regression was applied to check the relationship between OHL and the associated factors. The Chi-square test was applied to evaluate knowledge of study participants. The level of significance was set up at p < 0.05. RESULTS: A total of 252 school teachers with a Mean age of school teachers 32.25 ± 8.46 participated in the study. The multiple logistic regression model shows the association between age, education, and OHL level of school teachers. After adjustment for sociodemographic factors age (OR = 0.219, 95% CI: 0.058-0.834), education (OR = 9.053, 95% CI: 1.135-72,023) were significantly associated with OHL of school teachers. Female participants showed better performance with respect to all the knowledge questions, a significantly higher level of knowledge (p-value < 0.05) was reported with all the questions except the second question (dental plaques causes). 94.8% of teachers agreed that children's teeth should be checked by a dentist on a regular basis, while 96.8% agreed that dental health education should be included in the primary school curriculum and that all teachers should receive dental health education training. CONCLUSION: Overall, school teachers have high oral health literacy, adequate knowledge, and a positive attitude toward oral health. The female teachers had more knowledge about dentistry than their male counterparts.

Evaluation of bacterial leakage and marginal adaptation of the bioceramics pulp dressing materials: an invitro study.

OBJECTIVE: To compare the sealing ability and marginal adaptation of three calcium silicate-based cement (Biodentine, Pro root MTA, MTA Angelus) using a bacterial leakage model and scanning electron microscope (SEM). METHODS: Recently extracted lower first premolars were randomly categorized into three experimental groups (n = 15 samples), positive control (n = 5 samples), and negative control group (n = 5 sample). Samples from the experimental groups and positive control group were subject to cavity Class I occlusal preparation followed by modified coronal pulpotomy. Different types of bioceramic dressing material were placed in 3 mm thickness accordingly, group 1 (Biodentine), group 2 (MTA Angelus), and group 3 (ProRoot MTA). No dressing material was placed in the positive control group (group 4). All samples were placed in the incubator for 24 h at 37℃, 100% humidity, for the materials to be completely set. The final restoration was placed using the Z350 resin composite. A double layer of nail varnish was applied over all the sample surfaces except the occlusal site. Whereas the samples' surfaces in the negative control, were completely covered. A 3 mm length was measured from the root apex of the samples from each group, before proceeding with the resection. The bacterial leakage test was performed using Enterococcus faecalis TCC 23,125, and a sample from each experimental group was randomly chosen for SEM. Data analysis was conducted under the One-way ANOVA test, completed by Tukey's post hoc test. RESULTS: There is a significant difference in sealing ability and marginal adaptation between the groups. (p < 0.05). The study showed that Pro Root MTA had the superior sealing ability and marginal adaptation compared to Biodentine and MTA Angelus. CONCLUSION: The ProRoot MTA as a coronal pulpotomy pulp dressing material, was found to have a better marginal adaptation and sealing ability compared to three other bioceramics materials. The material would be the better choice during clinical settings and procedures.

An Insight into the Role of Marine Biopolymer Alginate in Endodontics: A Review.

Alginate is a natural marine biopolymer that has been widely used in biomedical applications, but research on its use as an endodontic material is still sparse in the literature. This pioneer review aims to summarize the emerging roles of alginate and to outline its prospective applications as a core biomaterial in endodontics. Ten electronic databases and five textbooks were used to perform a search of English-language literature on the use of alginate in endodontics published between January 1980 and June 2022. The risk of bias (RoB) of each included study was assessed using the Office of Health Assessment and Translation (OHAT) tool. Subsequently, studies were categorized into three tiers to represent the overall risk. Qualitative analysis was performed, and the articles were sorted into different thematic categories. An initial search yielded a total of 1491 articles, but only 13 articles were chosen. For most domains, all the studies were rated with 'probably low' or 'definitely low' RoB, except for domains 2 and 6. All included studies fall in the Tier 1 category and were either in vitro, in vivo, or ex vivo. Four thematic categories were identified: endodontic regeneration, intracanal medicament, filing material, and chelating agent. Based on the available evidence, alginate has emerged as a cell carrier and scaffold in regenerative endodontics, a microcapsule delivery system for intracanal medicaments, a chelating agent reinforcing material, and a root canal sealer. More well-designed experiments and clinical trials are needed to warrant the promising advent of this hydrogel-based biomaterial.

Synthesis of Silver Nanoparticles from Extracts of Wild Ginger (Zingiber zerumbet) with Antibacterial Activity against Selective Multidrug Resistant Oral Bacteria.

Antibiotic resistance rate is rising worldwide. Silver nanoparticles (AgNPs) are potent for fighting antimicrobial resistance (AMR), independently or synergistically. The purpose of this study was to prepare AgNPs using wild ginger extracts and to evaluate the antibacterial efficacy of these AgNPs against multidrug-resistant (MDR) Staphylococcus aureus, Streptococcus mutans, and Enterococcus faecalis. AgNPs were synthesized using wild ginger extracts at room temperature through different parameters for optimization, i.e., pH and variable molar concentration. Synthesis of AgNPs was confirmed by UV/visible spectroscopy and further characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy analysis (EDXA), and Fourier-transform infrared spectroscopy (FTIR). Disc and agar well diffusion techniques were utilized to determine the in vitro antibacterial activity of plant extracts and AgNPs. The surface plasmon resonance peaks in absorption spectra for silver suspension showed the absorption maxima in the range of 400-420 nm. Functional biomolecules such as N-H, C-H, O-H, C-O, and C-O-C were present in Zingiber zerumbet (Z. zerumbet) (aqueous and organic extracts) responsible for the AgNP formation characterized by FTIR. The crystalline structure of ZZAE-AgCl-NPs and ZZEE-AgCl-NPs was displayed in the XRD analysis. SEM analysis revealed the surface morphology. The EDXA analysis also confirmed the element of silver. It was revealed that AgNPs were seemingly spherical in morphology. The biosynthesized AgNPs exhibited complete antibacterial activity against the tested MDR bacterial strains. This study indicates that AgNPs of wild ginger extracts exhibit potent antibacterial activity against MDR bacterial strains.

Effect of Erosive Agents on Surface Characteristics of Nano-Fluorapatite Ceramic: An In-Vitro Study.

Erosive beverages cause dissolution of natural teeth and intra-oral restorations, resulting in surface characteristic changes, particularly roughness and degradation. The purpose of this study was to evaluate the surface roughness and topography of a dental ceramic following immersion in locally available erosive solutions. A total of 160 disc specimens of a nano-fluorapatite type ceramic (12 mm diameter and 2 mm thickness) were fabricated and equally distributed into two groups (n = 80) and then evenly distributed among the following five testing groups (n = 16): lemon juice, citrate buffer solution, 4% acetic acid, soft cola drink, and distilled water which served as a control. The surface roughness (Ra) and topography were evaluated using a profilometer and scanning electron microscope at baseline, 24 h, 96 h, and 168 h respectively. Data were analyzed using ANOVA and Tukey's multiple comparisons (p ≤ 0.05). Surface changes were observed upon exposure to all acidic beverages except distilled water. Amongst all immersion media, 4% acetic acid produced the most severe surface roughness across all time periods (i.e., baseline, 24 h, 96 h, and 168 h). A statistically significant difference in the surface roughness values between all immersion media and across all four time intervals was observed. Erosive agents had a negative effect on the surface roughness and topography of the tested ceramic. The surface roughness increased with increased storage time intervals.

Assessment of caries diagnostic thresholds of DMFT, ICDAS II and CAST in the estimation of caries prevalence rate in first permanent molars in early permanent dentition-a cross-sectional study.

BACKGROUND: The actual burden of dental caries prevalence varies with the caries assessment tool used. Therefore, the present study evaluated the caries diagnostic potentials of Decayed, Missing and Filled Teeth (DMFT); International Caries Detection and Assessment System (ICDAS) II and Caries Assessment Spectrum and Treatment (CAST) indices in estimating the caries prevalence rate of first permanent molar (FPM) in Saudi male children aged 7-9 years. METHODS: This descriptive, cross-sectional study included 390 children by multistage stratified cluster sampling method in Al-Jouf Province, Saudi Arabia. The prevalence rates of FPM caries were determined by DMFT, ICDAS II and CAST indices at various diagnostic cut-off points. Intra- and inter-examiner reliability was determined. RESULTS: The prevalence rates of FPM caries determined by DMFT (decayed), ICDAS II (codes 1-6) and CAST (codes 3-7) were 64.4% (61.6-67.2), 71.5% (69.2-73.2) and 71.0% (68.7-73.3), respectively. The prevalence rates of FPM caries determined by ICDAS II at various diagnostic cut-offs were as follows: 'sound' (code '0'), 28.5% (26.3-30.8); 'enamel caries' (codes 1-3), 57.2% (54.7-59.7) and 'dentinal caries' (codes 4-6), 14.3% (12.6-16.1). Similarly, the prevalence rates estimated by CAST at different diagnostic cut-off points were: 'healthy' (scores 0-2), 28.1% (25.9-30.4); 'premorbid' (score 3, enamel carious), 56.5% (54.0-59.0); 'morbid' (scores 4-5, cavitated carious dentin), 7.9% (6.6-9.3); 'severe morbidity' (scores 6-7, pulp exposure/fistula/abscess), 6.6% (5.4-8.1) and 'mortality' (score 8, lost), 0.8% (0.4-1.4). CONCLUSION: Enamel caries lesions were found in more than half of the FPMs investigated in the current study. CAST index is preferable because it detects the complete spectrum of caries. ICDAS II at codes 1-6 and CAST at codes 3-7 projected similar caries prevalence rates in FPMs.

Evaluation of root canal morphology in permanent maxillary and mandibular anterior teeth in Saudi subpopulation using two classification systems: a CBCT study.

BACKGROUND: Adequate knowledge of root canal morphology and possible variations is essential to achieve perfect root canal treatment and overcome treatment failure. Appropriate knowledge on root and canal morphology, communication, and documentation amongst dentists will be challenging from a diagnostic and successful treatment point of view. METHODS: A total of 3420 samples were included in this study from 285 cone-beam computed tomography images of the Saudi residents, including 171 males and 114 females aged 15 to 68 years from retrospective data dated from January 2018 to April 2021. The images were examined in sagittal, axial and coronal views using a 3D version software 1.0.10.6388. The number of canal and canal morphology was recorded using Vertucci and the new classification system. The SPSS 26 was used to conduct the statistical analysis as descriptive statistics such as mean; standard deviation and frequency were calculated. The Chi-square test analysed the data with the significance level set at 0.05. RESULTS: A total of 285 subjects participated in the study. Majority of the participants were Saudi nationals (80.7%), followed by Indian (7.4%), Pakistani (4.2%) and other nationalities. According to Vertucci and the new classification system, Type I and 1TN1 were the most common types, followed by Type III and Type IV, and then 1TN1-2-1 and 1TN1-2 in mandibular anteriors. The prevalence of canal variations in mandibular canine was higher in females than in males (P = 0.002). Maxillary laterals and mandibular anteriors showed the significant difference in the prevalence of root canal variation in relation to the ethnicity (P = 0.001) and age of the patients. Younger patients showed more variations than the older patients (P = 0.012, P = 0.023, P = 0.001, P = 0.001) in terms of maxillary laterals, mandibular central, laterals and canines, respectively. CONCLUSION: Mandibular permanent anteriors showed a wide range of canal variations and canal complexity. Males and females did not demonstrate a wide range of variation in the root canal morphology except for the canines in relation to the gender of the patients.

Evaluation of Attitude and Knowledge of Endodontic, Pedodontic and SBARD Residents in Saudi Arabia toward Regenerative Endodontics-A National Survey.

Background and Objectives: There are no guidelines on the regenerative endodontic procedures that should be followed in dental treatment. Thus, it is essential to learn the knowledge, attitudes, and opinions about regenerative endodontics among dental practitioners, particularly endodontists, as they are the first providers of this type of dental treatment. Aim: This study aimed to assess the knowledge and attitudes among residents of the Saudi Board of Advanced Restorative Dentistry (SBARD) in Saudi Arabia. Methods & Materials: A questionnaire-based survey was conducted among 128 residents of endodontics, pedodontics, and the SBARD in Saudi Arabia. The questionnaire was distributed to participants using the available electronic measures such as emails and social media. The questionnaire was made by Google Forms, and responses were received directly in the excel sheet in the email. The data were exported as an excel file, coded, and analyzed, and the p-value < 0.05 was set as significant. Results: More than 50% (74 dentists) of the participants reported receiving continuing education in regenerative treatment, with a significant difference found among specialty (p = 0.023). No significant association was found between knowledge, gender, and type of postgraduate study. The vast majority (89.1%) of the participants believed regenerative endodontics should be incorporated into dentistry curricula. About two-thirds (78.2%) of the participants declared their ability to attend future training courses in a regenerative endodontic, whereas 10.9% did not, and 10.9% were unsure. Conclusions: The dental practitioners were enthusiastic and interested in regenerative and stem cell treatment. The results also suggested incorporating regenerative treatment into the dental curriculum and signaled the need for more continued training courses.

Development and Validation of Oral Health Knowledge, Attitude and Behavior Questionnaire among Indian Adults.

Background and objectives: The Indian population faces numerous challenges to attain better oral hygiene due to a lack of oral health literacy. For the past 10 years, the prevalence of dental-related conditions in India has become a considerable problem in every state of India. A health-education-based oral health promotion strategy will be an ideal choice for the Indian population instead of endorsing conventional oral health promotion. The use of unsuitable tools to measure may lead to misleading and vague findings that might result in a flawed plan for cessation programs and deceitful effectiveness. Therefore, the research aimed to develop and validate an instrument that can assess the oral health knowledge, attitude and behavior (KAB) of adults in India. Materials and Methods: This study was carried among adults in India, who live in Chennai, Tamil Nadu. A questionnaire was fabricated and then validated using content, face, as well as construct. The knowledge domain was validated using item response theory analysis (IRT), whereas exploratory factor analysis (EFA) was used to validate the behavior domain and attitude. Results: Four principal sections, i.e., knowledge, attitude, demography and behavior, were used to fabricate a questionnaire following validation. Following analysis of item response theory on the knowledge domain, all analyzed items in the domain were within the ideal range of difficulty and discrimination. The Kaiser-Meyer-Olkin measure of sampling adequacy was 0.65 for the attitude and 0.66 for the behavior domain. A Bartlett's test of sphericity was conducted and demonstrated that outcomes for both domains were highly significant (p < 0.001). The factor analysis resulted in three factors with a total of eight items in the attitude domain and three factors with a total of seven items in the behavior domain depicting satisfactory factor loading (>0.3). Across the three factors, i.e., knowledge, attitude and behavior, internal consistency reliability was tested using Cronbach's alpha, and the values obtained were 0.67, 0.87, 0.67, and 0.88, respectively. Conclusions: The findings of this study that assessed validity and reliability showed that the developed questionnaire had an acceptable psychometric property for measuring oral health KAB among adults in India.

Socio-Behavioral Risk Indicators Linked to Untreated Early Childhood Caries and its Clinical Consequences in Preschool Children: A Cross-Sectional Study.

OBJECTIVES: This study aimed to determine the prevalence of and the socio-behavioral risk indicators associated with untreated dental caries (UDC) and its clinical consequences. STUDY DESIGN: A multi-stage cluster sampling approach was used to evaluate 168 preschool children in this cross-sectional study. The risk indicators associated with the presence of one or more decayed teeth (dt ≥ 1) and pulp-involved teeth (pt ≥ 1) were assessed using multiple logistic regression analysis. RESULTS: Overall, the prevalence of dt ≥ 1 and pt ≥ 1 was 82.1% and 27.9%, respectively. Children whose mothers had lower maternal education were 3.7 times more likely to have dt ≥ 1 than those whose mothers were graduates (adjusted odds ratio [AOR] = 3.74, 95% confidence interval [CI] 1.29-10.91). Children whose mothers had a history of maternal caries were 4.2 times more likely to have dt ≥ 1 (AOR = 4.23, 95% CI 1.56-11.44). Children whose mothers had lower maternal education were 5 times more likely to have pt ≥ 1 (AOR = 4.99, 95% CI 2.57-13.39). Underweight children were 7.2 times more likely to have pt ≥ 1 (AOR = 7.17, 95% CI 1.88-5.10). Children whose mothers had a history of maternal caries were 6.6 times more likely to have pt ≥ 1 (AOR = 6.62, 95% CI 7.17-18.88). CONCLUSIONS: Maternal education and caries were found to be significant risk indicators for UDC. The clinical consequences of UDC were related to child age, maternal education and caries, socioeconomic status and underweight.

Measurement of the Maximum Occlusal Bite Force and its Relation to the Caries Spectrum of First Permanent Molars in Early Permanent Dentition.

OBJECTIVE: To determine the maximum occlusal bite force (MOBF) of the complete spectrum of dental caries in first permanent molars (FPMs) in children aged 7-9 years. STUDY DESIGN: A cross-sectional study was conducted on 123 children. The evaluation of the caries spectrum of FPMs was carried out using the Caries Assessment Spectrum and Treatment index (CAST). The MOBF was measured in the FPM region using the portable occlusal force gauze. Independent sample t-test and one-way analysis of variance test were performed to compare MOBF with CAST scores of FPMs. Based on the CAST scores, FPMs were categorized into three groups, group 1: healthy (score 0, 1, 2), group 2: premorbid (score 3), group 3: morbid (score 4, 5). RESULTS: A significantly lower MOBF was observed (167.56 N ± 49.77) in the morbid stage (group 3) than in the premorbid stage (group 2: 291.57 N ± 56.64), and healthy (group 1; 320.93 N ± 54.23). Intergroup comparison also revealed that FPMs in the healthy stage was associated with a higher bite force compared to those in the premorbid and morbid stages (p<0.001). CONCLUSIONS: The mean MOBF decreased with the progression of the caries spectrum of FPMs in early permanent dentition.