Microresonator-based spectral translation of a gain-switched semiconductor laser comb.

Gain-switched semiconductor laser technology provides a simple and low-cost method to generate optical frequency combs. However, the spectral coverage of these compact comb sources has been limited to the near-infrared range. Here, we combine a gain-switched laser comb with a continuous-wave translation laser within a periodically poled lithium niobate microresonator and demonstrate efficient and broadband sum-frequency conversion, spectrally translating the near-infrared comb to the visible domain. The broadband nature of the nonlinear conversion arises from a chirping of the domain inversion grating period along the microresonator circumference. We also validate the coherence of the visible-wavelength comb teeth which underlines the general applicability of this spectral translation approach.

Active demultiplexer enabled mmW ARoF transmission of directly modulated 64-QAM UF-OFDM signals.

In this Letter, we experimentally demonstrate an unamplified analog RoF distribution of 60 GHz 5G signals. The system entails the heterodyning of two optical tones from an externally injected gain switched laser (EI-GSL) based optical frequency comb to generate a millimeter wave (mmW) signal. A fixed frequency separation and a high level of phase correlation, between the EI-GSL comb lines, results in the generation of a high-quality signal. An active demultiplexer is used to filter and amplify two comb tones, thus alleviating the need for an external optical amplifier to boost the low power comb tones. Furthermore, the same demultiplexer is also used to modulate one of the tones with a 64-QAM UF-OFDM signal. Such an approach enables the remote generation of a mmW downlink data signal as well as an unmodulated RF carrier that could be used to downconvert the mmW signals to an intermediate frequency. Using the abovementioned scheme, we demonstrate the distribution of the downlink signal over 25 km of fiber, achieving a BER of 2.4e-3 (below the HD-FEC limit of 3.8e-3) and only a 0.5 dB penalty at the FEC limit in comparison to the BtB case.

Expansion and phase correlation of a wavelength tunable gain-switched optical frequency comb.

A novel scheme for the expansion and phase correlation of a wavelength tunable gain-switched optical frequency comb (OFC) is presented. This method entails firstly combining two gain-switched OFCs and expanding them using a phase modulator. Subsequently, the phase correlation between all the comb lines is induced through four-wave mixing (FWM) in a semiconductor optical amplifier (SOA). In this article, the generation of 42 highly correlated comb lines separated by 6.25 GHz, with an optical carrier to noise ratio (OCNR) of more than 50 dB, is experimentally demonstrated. In addition, the wavelength tunability of the scheme, over 30 nm within the C band, is shown. Finally, the degree of phase correlation between comb lines is verified through RF beat tone linewidth measurements. The results show a five orders of magnitude reduction in the beat tone linewidth, due to FWM in an SOA.

Gain-switched semiconductor laser driven soliton microcombs.

Dissipative Kerr soliton generation using self-injection-locked III-V lasers has enabled fully integrated hybrid microcombs that operate in turnkey mode and can access microwave repetition rates. Yet, continuous-wave-driven soliton microcombs exhibit low energy conversion efficiency and high optical power threshold, especially when the repetition frequencies are within the microwave range that is convenient for direct detection with off-the-shelf electronics. Here, by actively switching the bias current of injection-locked III-V semiconductor lasers with switching frequencies in the X-band and K-band microwave ranges, we pulse-pump both crystalline and integrated microresonators with picosecond laser pulses, generating soliton microcombs with stable repetition rates and lowering the required average pumping power by one order of magnitude to a record-setting level of a few milliwatts. In addition, we unveil the critical role of the phase profile of the pumping pulses, and implement phase engineering on the pulsed pumping scheme, which allows for the robust generation and the stable trapping of solitons on intracavity pulse pedestals. Our work leverages the advantages of the gain switching and the pulse pumping techniques, and establishes the merits of combining distinct compact comb platforms that enhance the potential of energy-efficient chipscale microcombs.

Frequency division using a soliton-injected semiconductor gain-switched frequency comb.

With optical spectral marks equally spaced by a frequency in the microwave or the radio frequency domain, optical frequency combs have been used not only to synthesize optical frequencies from microwave references but also to generate ultralow-noise microwaves via optical frequency division. Here, we combine two compact frequency combs, namely, a soliton microcomb and a semiconductor gain-switched comb, to demonstrate low-noise microwave generation based on a novel frequency division technique. Using a semiconductor laser that is driven by a sinusoidal current and injection-locked to microresonator solitons, our scheme transfers the spectral purity of a dissipative soliton oscillator into the subharmonic frequencies of the microcomb repetition rate. In addition, the gain-switched comb provides dense optical spectral emissions that divide the line spacing of the soliton microcomb. With the potential to be fully integrated, the merger of the two chipscale devices may profoundly facilitate the wide application of frequency comb technology.