Biomechanical changes following corneal crosslinking in keratoconus patients.

PURPOSE: To evaluate the biomechanical and tomographic outcomes of keratoconus patients up to four years after corneal crosslinking (CXL). METHODS: In this longitudinal retrospective-prospective single-center case series, the preoperative tomographic and biomechanical results from 200 keratoconus eyes of 161 patients undergoing CXL were compared to follow-up examinations at three-months, six-months, one-year, two-years, three-years, and four-years after CXL. Primary outcomes included the Corvis Biomechanical Factor (CBiF) and five biomechanical response parameters obtained from the Corvis ST. Tomographically, the Belin-Ambrósio deviation index (BAD-D) and the maximal keratometry (Kmax) measured by the Pentacam were analyzed. Additionally, Corvis E-staging, the thinnest corneal thickness (TCT), and the best-corrected visual acuity (BCVA) were obtained. Primary outcomes were compared using a paired t-test. RESULTS: The CBiF decreased significantly at the six-month (p < 0.001) and one-year (p < 0.001) follow-ups when compared to preoperative values. E-staging behaved accordingly to the CBiF. Within the two- to four-year follow-ups, the biomechanical outcomes showed no significant differences when compared to preoperative. Tomographically, the BAD-D increased significantly during the first year after CXL with a maximum at six-months (p < 0.001), while Kmax decreased significantly (p < 0.001) and continuously up to four years after CXL. The TCT was lower at all postoperative follow-up visits compared to preoperative, and the BCVA improved. CONCLUSION: In the first year after CXL, there was a temporary progression in both the biomechanical CBiF and E-staging, as well as in the tomographic analysis. CXL contributes to the stabilization of both the tomographic and biomechanical properties of the cornea up to four years postoperatively.

Endothelial Cell Loss in Patients with Phakic Intraocular Lenses. / Endothelzellverlust bei phaken Intraokularlinsen.

Although the safety of phakic intraocular lenses (pIOLs) has been continuously improved over 70-years of development, high endothelial cell losses can occur even with current pIOL models. Numerous studies have demonstrated that the distance of a pIOL to the corneal endothelium plays a crucial role in the extent of endothelial cell loss. For this reason alone, higher endothelial cell loss tends to be observed with anterior chamber lenses than with posterior chamber lenses. Adequate preoperative anterior chamber depth is essential, at least for iris-fixed pIOLs, in order to ensure a safe distance from the endothelium. However, the anterior chamber becomes shallower with age and therefore it may be useful to consider patient age in the safety criteria. Although endothelial cell loss is generally low with current pIOL models, regular monitoring of the endothelial cell density remains essential due to large interindividual differences in patients with pIOLs. If the endothelial cell loss is greater than expected and the follow-up visits confirm the trend, the pIOL should be explanted without delay. The endothelial reserve should be considered on an individual basis by taking into account patient age, physiological endothelial cell loss, and loss due to further surgery. With careful indication and long-term patient care, pIOLs remain a safe treatment option.

Cataract Classification Systems: A Review.

Cataract is among the leading causes of visual impairment worldwide. Innovations in treatment have drastically improved patient outcomes, but to be properly implemented, it is necessary to have the right diagnostic tools. This review explores the cataract grading systems developed by researchers in recent decades and provides insight into both merits and limitations. To this day, the gold standard for cataract classification is the Lens Opacity Classification System III. Different cataract features are graded according to standard photographs during slit lamp examination. Although widely used in research, its clinical application is rare, and it is limited by its subjective nature. Meanwhile, recent advancements in imaging technology, notably Scheimpflug imaging and optical coherence tomography, have opened the possibility of objective assessment of lens structure. With the use of automatic lens anatomy detection software, researchers demonstrated a good correlation to functional and surgical metrics such as visual acuity, phacoemulsification energy, and surgical time. The development of deep learning networks has further increased the capability of these grading systems by improving interpretability and increasing robustness when applied to norm-deviating cases. These classification systems, which can be used for both screening and preoperative diagnostics, are of value for targeted prospective studies, but still require implementation and validation in everyday clinical practice.

Video analysis of optic-haptic-interaction during hydrophobic acrylic intraocular lens implantation using preloaded injectors.

OBJECTIVE: To compare the optic-haptic interaction of different hydrophobic acrylic IOLs after using six preloaded injectors. METHODS: We reviewed the video-recordings of procedures on a total of 388 eyes that underwent phacoemulsification and intraocular lens (IOL) implantation. For six preloaded injectors: multiSert (Hoya Surgical Optics) [System 1], TECNIS Simplicity (Johnson & Johnson Vision) [System 2], TECNIS iTec (Johnson & Johnson Vision) [System 3], AutonoMe (Alcon, Laboratories) [System 4], Bluesert (Carl Zeiss Meditec) [System 5], and Prosert (OphthalmoPro GmbH) [System 6], we noted in each case the time of IOL delivery and made a descriptive observation of IOL insertion and optic-haptic-interaction. RESULTS: We defined standard haptic behavior where the haptics emerged "folded" from the injector and quickly recovered their pre-implantation appearance. The incidence where the leading haptic emerged in a deformed way for System 1 was 20%, System 2: 19%, System 3: 14%, System 4: 56%, System 5: 24% and System 6: 5%. For trailing haptic deformed behavior, the incidence was 36%, 6%, 4%, 8%, 18% and 2%, respectively for Systems 1 to 6. Optic-haptic adhesion occurred in 2% of cases for System 1, 44% for System 2, 52% for System 3, 48% for System 4, and 11% for System 6 (P < 0.05). Adhesion was not found with System 5. CONCLUSIONS: We observed different deformed behavior for leading and trailing haptics in the six preloaded systems, some systems had as much as 52% optic-haptic adhesion.

Clinical outcomes of bilateral implantation of new generation monofocal IOL enhanced for intermediate distance and conventional monofocal IOL in a Korean population.

BACKGROUND: To compare the clinical outcomes of bilateral implantation of enhanced intermediate function intraocular lenses (IOLs) and standard monofocal IOLs. METHODS: In this prospective, randomized, comparative controlled study, we compared the visual outcomes of patients who underwent bilateral cataract surgery at the Kangbuk Samsung Hospital, Sungkyunkwan University School of Medicine, with either enhanced monofocal IOLs (Tecnis Eyhance, ICB00, Johnson and Johnson Vision Care, Inc) (Group 1) or standard monofocal IOLs (Tecnis, ZCB00, Johnson and Johnson Vision Care, Inc) (Group 2). The assessment included monocular and binocular uncorrected distance visual acuity (UDVA), uncorrected intermediate (UIVA at 60 cm) and near (UNVA at 40 cm) visual acuity, uncorrected defocus curves, contrast sensitivity testing (CST), and reading speed test using Quality of vision was evaluated using the Visual Function Questionnaire (VFQ-25). RESULTS: At 3-months postoperatively, monocular and binocular outcomes of UIVA and UNVA were statistically significantly better in Group 1 (P < 0.05). The binocular uncorrected defocus curve of Group 1 showed statistically significantly better outcomes at vergence ranges of -1.5 to -4.0 D (P < 0.05). Significantly higher reading speed test was also observed in Group 1 in all ranges tested (1.0 to 0.1 LogMAR) (P < 0.05). There were no statistically significant differences in CST between groups. CONCLUSIONS: Bilateral implantation of enhanced monofocal IOLs provided better vision at intermediate and near distances compared to standard monofocal IOLs, while maintaining good distance vision and contrast sensitivity.

Aetiology and Management of IOL Dislocations. / Ursachen und Management von IOL-Dislokationen.

Early (< 3 months) intraocular lens (IOL) dislocation occurs due to insufficient fixation in the capsular bag, while late dislocation (≥ 3 months) is due to increasing insufficiency of the zonular apparatus. Iris-fixated IOL (IFIOL) and suture- or sutureless-fixated scleral IOL (SFIOL) are currently the most commonly used methods when IOL exchange is indicated. Different methods of scleral fixation with or without sutures have been described. The most important techniques are summarised in this paper. IFIOL and SFIOL allow comparable visual outcomes but differ in their risk profile. The decision of which method to use should be made case by case and in accordance with the surgeon's preference.

Fusarium Keratitis on the Rise - a Clinical Review. / Die Fusarien-Keratitis auf dem Vormarsch ­ eine aktuelle klinische Übersicht.

Fungal keratitis due to Fusarium species is a rare but serious ocular disease. Due to its rapid progression, often late diagnostic confirmation as well as limited topical treatment options, this is potentially sight threatening. Increasing contact lens use and global climate change have been suggested to be factors leading to an increase in cases of fusarium keratitis, even in regions with moderate climate. Early recognition and initiation of antimycotic treatment, as well as early surgical treatment by penetrating keratoplasty are decisive for the outcome.

Evaluating the Predictability of Postoperative Target Refraction Using the Prototype of a New Intraoperative Aberrometer. / Evaluation des Prototyps eines neuen intraoperativen Aberrometers für die Vorhersage der postoperativen Zielrefraktion.

Despite all the progress in cataract and refractive lens surgery, refractive surprise is common in clinical practice. A significant postoperative refractive error is particularly annoying - and contributes to the patient's dissatisfaction with the procedure and the surgeon - when a multifocal IOL, an EDOF-IOL or a toric IOL has been implanted. The relatively new technology of intraoperative aberrometry offers the surgeon the option to intraoperatively measure the eye and its refraction, either directly after lens extraction and/or following IOL implantation. Currently, three different systems are available. In a number of studies, the technology has shown a better refractive predictability than preoperative biometry. Besides giving an evaluation of the prototype of a new intraoperative aberrometer, the I-O-W-A system, we also present our results on the influence of the kind of anaesthesia chosen and of two different IOL designs on the predictability of intraoperative aberrometry.

Reversible Multifocality Achieved Through Polypseudophakia. / Reversible Multifokalität durch Polypseudophakie.

Simultaneous implantation of a monofocal or monofocal toric intraocular lens (IOL) into the capsular bag and a multifocal IOL into the ciliary sulcus, referred to as duet procedure, allows us to create multifocality that is more easily reversible than the implantation of a capsular bag-fixated multifocal IOL. The optical quality and results after the duet procedure are equivalent to those of a capsular bag-fixated multifocal IOL. Patients who cannot tolerate the side effects of multifocal optics or who develop an ocular condition leading to loss of function such as age-related macular degeneration (AMD) or glaucoma in the course of their lives may benefit from the reversibility of the procedure.

Opacification of Hydrophilic Acrylic Intraocular Lenses: Overview of Laboratory Methods for Histological Analysis and Replication of IOL Calcification. / Eintrübung hydrophiler Acrylintraokularlinsen: Überblick zu Labormethoden der histologischen Analyse und Replikation der Kalzifikation.

Opacification of intraocular lenses (IOLs) due to material changes is a serious complication that can compromise the good visual outcomes of uncomplicated cataract surgery. In hydrophobic acrylic IOLs, opacification can result from glistening formation, while in hydrophilic acrylic IOLs, there is a risk of calcification due to the formation of calcium phosphates within the polymer. Over time, various methods have been developed to investigate calcification in hydrophilic acrylic IOLs. The aim of this article is to provide an overview of standard histological staining and models used to simulate IOL calcification. Histological staining can be used to detect calcification and assess the extent of crystal formation. The development of in vivo and in vitro replication models has helped to identify the underlying pathomechanisms of calcification. In vivo models are suitable for assessing the biocompatibility of IOL materials. Bioreactors as an in vitro model can be used to investigate the kinetics of crystal formation within the polymer. The replication of IOL calcification under standardized conditions using electrophoresis allows for the comparison of different lens materials with respect to the risk of calcification. The combination of different analytical and replication methods can be used in the future to further investigate the pathomechanisms of calcium phosphate crystal formation and the influence of risk factors. This may help to prevent calcification of hydrophilic acrylic IOLs and associated explantation and complications.

Change in Subfoveal Choroidal Thickness following Cataract Surgery Imaged with Enhanced Depth Imaging Optical Coherence Tomography.

BACKGROUND: Due to its invasive nature, cataract surgery can lead to inflammatory processes in the posterior segment, which can result in prolonged recovery times, reduced functional outcomes, and late-onset complications. The aim of the current study was to identify wherever phacoemulsification parameters play a role in choroidal thickness change following cataract surgery. METHODS: This prospective single-center study enrolled 31 patients (31 eyes) scheduled to undergo routine cataract surgery. Patients with previous ocular surgeries, pathologies or general disorders affecting vision were excluded. Patients were examined preoperatively, as well as 1, 4, and 12 weeks after surgery. Corrected distance visual acuity (CDVA), intraocular pressure (IOP) as well as cumulative dissipated energy (CDE), ultrasound time (UT), and fluids used during surgery were recorded. Subfoveal choroidal thickness was measured manually by two masked independent experts using enhanced depth imaging (EDI) optical coherence tomography (OCT). Furthermore, cataract density was automatically calculated using a custom MATLAB script and an anterior segment OCT. RESULTS: Subfoveal choroidal thickness increased significantly (p < 0.001, Student's paired sample t-test) and continuously during the 12-week-long follow-up period. Both the nuclear lens density and the improvement in CDVA correlated significantly with this increase (r = 0.413, p = 0.021 and r = 0.421, p = 0.018, respectively). Neither the CDE (r = 0.334, p = 0.071), the UT (r = 0.102, p = 0.629), the amount of fluid used (r = 0.237, p = 0.27) nor the decrease in IOP (r = - 0.197, p = 0.288) showed any significant correlation with the choroidal swelling. CONCLUSION: Cataract surgery leads to an increase in subfoveal choroidal thickness. While no statistically significant correlation to the phacoemulsification parameters could be established, this might be because of a selection bias due to the technological constraints of the OCT. Nevertheless, the choroid might play a central role in early- and late-onset complications.

Biomechanical Analysis of Tomographically Regular Keratoconus Fellow Eyes Using Corvis ST. / Biomechanische Analyse von tomografisch unauffälligen Keratokonus-Partneraugen mit dem Corvis ST.

BACKGROUND: Keratoconus is a bilateral, yet asymmetric disease. In rare cases, the second eye may show no signs of tomographic changes. The purpose of this study was to analyze the biomechanical characteristics in tomographically regular keratoconus fellow eyes. MATERIALS AND METHODS: This retrospective, consecutive case series analyzed 916 eyes of 458 patients who presented to our keratoconus clinic between November 2020 and October 2022. Primary outcome measures included best-corrected visual acuity (BCVA), tomographic Scheimpflug analysis using Pentacam AXL (Oculus, Wetzlar, Germany), and biomechanical assessment using Corvis ST (Oculus, Wetzlar, Germany). Tomographic changes were assessed via analysis of the anterior and posterior curvature, K-max, thinnest corneal thickness (TCT), the Belin/Ambrosio Deviation Display (BAD-D), and the ABCD-Grading. Biomechanical changes were analyzed using Corvis Biomechanical Index (CBI) and Tomographic Biomechanical Index (TBI). RESULTS: Of 916 eyes, 34 tomographically regular fellow eyes (7.4%) were identified and included in the analysis. Overall, the mean BCVA was - 0.02 ± 0.13 logMAR. Tomographic analysis showed mean K-max of 43.87 ± 1.21 D, mean TCT of 532 ± 23 µm, and mean BAD-D of 1.02 ± 0.43. Biomechanical analysis demonstrated mean CBI of 0.28 ± 0.26 and mean TBI of 0.34 ± 0.30. While normal CBI-values were observed in 16 (47%) of 34 eyes, only 13 eyes (38%) showed a regular TBI and only 7 eyes (21%) showed regular TBI and CBI. The sensitivity of CBI and TBI to detect a tomographically normal keratoconus fellow eye was 53% and 62%, respectively. CONCLUSION: A highly asymmetric corneal ectasia with regular tomographic finding in a fellow eye is rare among keratoconus patients. In such cases, a biomechanical analysis may be useful in detecting early signs of corneal ectasia. In our analysis, the TBI showed high sensitivity for detecting a biomechanical abnormality in tomographically regular fellow eyes.

Differential Diagnosis of Changes in Intraocular Lenses. / Differenzialdiagnostik von Veränderungen in Intraokularlinsen.

Differentiating between various intraocular lens (IOL) changes can be a challenge. In particular, certain IOL models carry the risk of late postoperative calcification. A major cause of IOL exchange surgery could be avoided if appropriate modifications were made during the IOL manufacturing process. The use of a hydrophilic acrylate carries the risk of IOL calcification, especially when a secondary procedure, such as a pars plana vitrectomy or other procedures using gas or air, is performed. In secondary IOL calcification, there is a wide range of opacification patterns, which are usually located in the centre on the anterior surface of the IOL or sometimes elsewhere. Often, granular deposits accumulate just below or on the surface of the IOL, leading to significant deterioration in visual quality and eventually requiring IOL exchange surgery. Therefore, in the case of eyes requiring secondary surgical intraocular intervention in the future, the use of hydrophilic IOLs should be critically evaluated. With regard to hydrophobic IOL materials, there are clear differences in the susceptibility to the formation of glistenings. Over time, there has been a significant decrease in glistening formation over the past 30 years due to optimisation of the material. With hydrophobic IOLs, special care should also be taken to avoid mechanical damage. In general, the only treatment option for functionally-impairing IOL opacification is surgical lens exchange, which carries potential risks of complications. In cases with a low degree of functional impairment, and especially in eyes with additional ocular diseases, it may be difficult to weigh the risk of additional surgery against the potential benefit. In some cases, it may be more appropriate not to perform an IOL exchange despite the IOL opacification. Recent visualisation methods that allow high-resolution analysis of the opacities in vivo and in vitro may be used in the future to estimate the functional effects of various IOL material changes on the optical quality.

Evaluation of Ocular Diameter Parameters Using Swept-Source Optical Coherence Tomography.

Purpose: To investigate the iridocorneal angle-to-angle (ATA), sclera spur-to-sclera spur (STS), and white-to-white (WTW) ocular diameters and their potential influence on anterior chamber intraocular lens (ACIOL) and implantable collamer lens (ICL) sizing in Chinese subjects by using a swept-source optical coherence tomography system (SS-OCT). Design: A retrospective, observational, cross-sectional study. Methods: In 60 right eyes (60 subjects), the ATA, STS, and WTW were measured in six axes (0°-180°, 30°-210°, 60°-240°, 90°-270°, 120°-300°, and 150°-330°) using SS-OCT. The ACIOL and ICL sizes were calculated based on horizontal and vertical axes anterior segment data. A paired sample t-test was used to test the differences in each parameter across the six axes, the potential difference between each pair of parameters in a given axis, and the artificial lens size difference between the horizontal and vertical directions. Pearson's correlation analysis was used to determine the potential correlation between age and AL, WTW, STS, and ATA distances. Results: ATA and STS were the longest on the vertical and shortest on the horizontal axis, while WTW was similar on both axes. These three parameters differed only in the vertical axis (F = 4.910, p = 0.008). ATA and STS were by 0.23 ± 0.08 mm (p = 0.005) and 0.21 ± 0.08 mm wider (p = 0.010) than WTW, respectively. ICL size was 0.27 ± 0.23 mm smaller when based on the horizontal than on the vertical axis parameters (p < 0.001), while ACIOL remained similar (p = 0.709). Age correlated negatively and axial length positively with all measured values. ATA, STS, and WTW correlated positively in the same axis (all p < 0.001). Conclusions: ATA and STS were longer in the vertical than in the horizontal direction, while WTW measurements remained similar. ATA and STS diameters more accurately depicted anatomic relationships for phakic IOL sizing than WTW.

Manifestations of intraocular inflammation over time in patients on brolucizumab for neovascular AMD.

PURPOSE: To describe the adverse events associated with brolucizumab, in particular the sequence of intraocular inflammation (IOI), retinal vasculitis (RV), and/or retinal vascular occlusion (RO). METHODS: This was an unmasked post hoc analysis of the randomized HAWK/HARRIER clinical trials. Patients with neovascular AMD in the brolucizumab arms of the trials were included. IOI-related adverse events reported by study investigators were analyzed to determine early signs and the time course of IOI-related adverse events, using a subgroup of patients with definite/probable IOI cases identified in an independent unmasked post hoc review by an external safety review committee. A limited literature review on IOI following anti-VEGF therapy was also conducted. RESULTS: Among 50 patients with definite/probable IOI cases identified by the safety review committee, 12 had RV or RO adverse events reported by the investigators. For 6 of 12, IOI (other than RV) was reported before RV or RO. The duration from the first IOI adverse event to the first RV or RO adverse event ranged from 16 to 171 days for 5 patients and was 553 days for 1 patient. Four of the 6 patients received ≥ 1 brolucizumab injection on or after the date of the first IOI adverse event and before the first RV or RO adverse event. CONCLUSIONS: IOI may precede RV or RO in some patients treated with brolucizumab.

THE NOVEL USE OF HIGH-FLOW POLYIMIDE CANNULAS TO IMPROVE SILICONE OIL INJECTABILITY IN VITREORETINAL SURGERY.

PURPOSE: The injection of high-viscosity silicone oil lengthens injection time. New polyimide cannulas offer a greater inner diameter than conventional metal cannulas at the same gauge. We compared the injection time for polyimide and metal cannulas at 23 G for a variety of silicone oils including a 12,500-mPas prototype oil. METHODS: In this laboratory study, injection time was measured three times per cannula and per oil. Warming the oil before injection to up to 42°C was also evaluated. Finally, the feasibility of polyimide cannulas was tested in vitrectomized porcine eyes. RESULTS: The 23-G polyimide cannula mostly decreased injection times. The time to inject 5 mL of Siluron Xtra and Siluron 5000 decreased by 6:02 (76.9%) minutes (483 vs. 121 seconds) and 12:01 (74.7%) minutes (973 vs. 252 seconds), respectively. Although the 23-G metal cannula failed to inject 12,500 mPas oil, 5 mL was injected in 10:21 minutes using the polyimide cannula. Prewarming Siluron 5000 to 42°C lowered the injection time by 9.0% and by 12.1% when using the metal or polyimide cannula, respectively. CONCLUSION: Polyimide cannulas allow a clinically relevant decrease in injection time. They may not only shorten surgery time but could also ease the use of next-generation ultra-high-viscosity silicone oils. Prewarming silicone oil leads to decreased injection times.

Modified argon laser therapy for benign tumor of the eyelid.

BACKGROUND: To report about the therapy of benign eyelid tumors with a modified argon laser technique as an alternative to surgery. METHODS: Nineteen benign tumors of the eyelid were included in this study. After staining the surface of the tumor with a violet marker, low-energy argon laser photoablation was performed. A mean number of 312 spots (spot size ranging from 150 to 500 µm) with a power of 200 to 400 mW, and a duration between 0.1 and 0.2 s were applied. RESULTS: The eyelid tumors were located mainly in the lower eyelid (58%). Dermal nevi and papilloma were the most frequently treated lesions. Over a mean follow-up period of 10.5 months (range 6-18 months), all eyelid tumors were successfully treated by a single session of laser therapy. All patients were satisfied with the laser therapy and the cosmetic result. No postoperative complications were observed. No relapses occurred during follow-up. CONCLUSIONS: Our modified method of argon laser therapy utilizes the staining of the surface of the eyelid tumor to increase the amount of thermal laser energy absorbed by the target. This novel technique is simple and effective for treating benign eyelid tumors.

Comparative Surface Imaging Study of Multifocal Diffractive Intraocular Lenses. / Vergleich des Oberflächenprofils von multifokalen diffraktiven Intraokularlinsen.

PURPOSE: To analyse and compare the surface topography and roughness of three different types of diffractive multifocal IOLs. METHODS: Using scanning electron microscope (SEM, Inspect F, 5.0 KV, maximum magnification up to 20,000) and atomic force microscope (AFM, Park Systems, XE-100, non-contact, area profile comparison, 10 × 10 µm, 40 × 40 µm), the surface quality of the following diffractive IOLs was studied: the AcrySof IQ PanOptix (Alcon, USA), the AT LARA 829MP (Carl Zeiss Meditec, Germany), and Tecnis Symfony (Johnson&Johnson Vision, USA). The measurements were made over three representative areas (central non-diffractive optic, central diffractive optic, and diffractive step) of each IOL. Roughness profile in terms of mean arithmetic roughness (Ra) and root-mean-squared roughness (Rq) values were obtained and compared statistically. RESULTS: In SEM examination, all IOLs showed a smooth optical surface without any irregularities at low magnification. At higher magnification, Tecnis Symfony showed unique highly regular, concentric, and lineate structures in the diffractive optic area which could not be seen in the other studied diffractive IOLs. The differences in the measured Ra and Rq values of the Tecnis Symfony were statistically significant compared to the other models (p < 0.05). CONCLUSION: Various different topographical traits were observed in three diffractive multifocal IOLs. The Ra values of all studied IOLs were within an acceptable range. Tecnis Symfony showed statistically significant higher surface Ra values at both central diffractive optic and diffractive step areas. Furthermore, compared to its counterparts, Tecnis Symfony demonstrated highly ordered, concentric pattern in its diffractive surfaces.

A review of late intraocular lens opacifications.

PURPOSE OF REVIEW: Phacoemulsification cataract surgery is one of the most commonly performed surgical procedure worldwide. In the majority of cases, intraocular lenses (IOLs) are implanted. Due to the increasing life expectancy and the fact that cataract surgery is performed in earlier stages, the anticipated IOL duration in the eye has increased over the last decades. The aim of this study was to review the types and describe the characteristics of late intraocular lens opacifications. RECENT FINDINGS: Calcification was the most commonly reported type of opacification in hydrophilic IOLs; it usually negatively impacted the visual function and required IOL explantation. Glistening manifested in hydrophobic acrylic lenses and was frequent in some IOL models. In most cases glistening and subsurface nanoglistenigs do not lead to a decline in visual acuity or require IOL exchange. Current studies indicate that fluid-related phenomena may induce straylight, leading to a decrease of comfort and quality of vision. SUMMARY: Several reports on late IOL opacifications have been published in recent years. In some cases, particularly in glistening, the development of the opacifications might be related to IOL aging. The influence of the fluid-related microvacuoles on the quality of vision requires further research.

THE LOSS OF INFRARED LIGHT SENSITIVITY OF PHOTORECEPTOR CELLS MEASURED WITH TWO-PHOTON EXCITATION AS AN INDICATOR OF DIABETIC RETINOPATHY: A Pilot Study.

PURPOSE: Human photoreceptors are sensitive to infrared light (IR). This sensitivity can be used as a novel indicator of retinal function. Diabetic retinopathy patients were assessed using in vivo two-photon excitation and compared their scotopic IR threshold with that of healthy patients. METHODS: Sixty-two participants, 28 healthy and 34 with diabetic retinopathy, underwent a comprehensive eye examination, where visual acuity and contrast sensitivity were assessed. Infrared thresholds were measured in the fovea and parafovea following 30-minute dark adaptation. A two-photon excitation device was used with integrated pulsed laser light (1,045 nm) for sensitivity testing and scanning laser ophthalmoscopy for fundus imaging. RESULTS: The mean Snellen visual acuity of diabetic patients (6/7.7) was worse than that of the healthy patients (6/5.5), which was significantly different (P < 0.001). Disease patients had decreased contrast sensitivity, especially at 6 and 18 cycles/degree. The mean retinal sensitivity to IR light in eyes with diabetic retinopathy (11.6 ± 2.0 dB) was significantly (P < 0.001) lower than that in normal eyes (15.5 ± 1.3 dB). CONCLUSION: Compared with healthy control subjects, the IR light sensitivity of diabetic patients was significantly impaired. Two-photon measurements can be used in the assessment of retinal disease, but further studies are needed to validate IR light stimulation in various stages of diabetic retinopathy.