Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes.

In perovskite solar cells, the interfaces between the perovskite and charge-transporting layers contain high concentrations of defects (about 100 times that within the perovskite layer), specifically, deep-level defects, which substantially reduce the power conversion efficiency of the devices1-3. Recent efforts to reduce these interfacial defects have focused mainly on surface passivation4-6. However, passivating the perovskite surface that interfaces with the electron-transporting layer is difficult, because the surface-treatment agents on the electron-transporting layer may dissolve while coating the perovskite thin film. Alternatively, interfacial defects may not be a concern if a coherent interface could be formed between the electron-transporting and perovskite layers. Here we report the formation of an interlayer between a SnO2 electron-transporting layer and a halide perovskite light-absorbing layer, achieved by coupling Cl-bonded SnO2 with a Cl-containing perovskite precursor. This interlayer has atomically coherent features, which enhance charge extraction and transport from the perovskite layer, and fewer interfacial defects. The existence of such a coherent interlayer allowed us to fabricate perovskite solar cells with a power conversion efficiency of 25.8 per cent (certified 25.5 per cent)under standard illumination. Furthermore, unencapsulated devices maintained about 90 per cent of their initial efficiency even after continuous light exposure for 500 hours. Our findings provide guidelines for designing defect-minimizing interfaces between metal halide perovskites and electron-transporting layers.

Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications.

Over the last several years, inorganic-organic hybrid perovskites have shown dramatic achievements in photovoltaic performance and device stability. Despite the significant progress in photovoltaic application, an in-depth understanding of the fundamentals of precursor solution chemistry is still lacking. In this review, the fundamental background knowledge of nucleation and crystal growth processes in solution including the LaMer model and Ostwald ripening process is described. This review article also highlights the recent progress in precursor-coordinating molecule interaction in solution along with the role of anti-solvent in the solvent engineering process to control nucleation and crystal growth. Moreover, chemical pathways from precursor solution to perovskite film formation are given. This represents identification of the intermediate phase induced by precursor-coordinating molecule interaction and responsible intermediate species for uniform and dense perovskite film formation. Further to the description of chemical phenomena in solution, the contemporary progress in chemical precursor composition is also provided to comprehend the current research approaches to further enhance photovoltaic performance and device stability. On the basis of the critical and comprehensive review, we provide some perspectives to further achieve high-performance perovskite solar cells with long-term device stability through precisely controlled nucleation and crystal growth in precursor solution.

Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells.

High-efficiency lead halide perovskite solar cells (PSCs) have been fabricated with α-phase formamidinium lead iodide (FAPbI3) stabilized with multiple cations. The alloyed cations greatly affect the bandgap, carrier dynamics, and stability, as well as lattice strain that creates unwanted carrier trap sites. We substituted cesium (Cs) and methylenediammonium (MDA) cations in FA sites of FAPbI3 and found that 0.03 mol fraction of both MDA and Cs cations lowered lattice strain, which increased carrier lifetime and reduced Urbach energy and defect concentration. The best-performing PSC exhibited power conversion efficiency >25% under 100 milliwatt per square centimeter AM 1.5G illumination (24.4% certified efficiency). Unencapsulated devices maintained >80% of their initial efficiency after 1300 hours in the dark at 85°C.

Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide.

In general, mixed cations and anions containing formamidinium (FA), methylammonium (MA), caesium, iodine, and bromine ions are used to stabilize the black α-phase of the FA-based lead triiodide (FAPbI3) in perovskite solar cells. However, additives such as MA, caesium, and bromine widen its bandgap and reduce the thermal stability. We stabilized the α-FAPbI3 phase by doping with methylenediammonium dichloride (MDACl2) and achieved a certified short-circuit current density of between 26.1 and 26.7 milliamperes per square centimeter. With certified power conversion efficiencies (PCEs) of 23.7%, more than 90% of the initial efficiency was maintained after 600 hours of operation with maximum power point tracking under full sunlight illumination in ambient conditions including ultraviolet light. Unencapsulated devices retained more than 90% of their initial PCE even after annealing for 20 hours at 150°C in air and exhibited superior thermal and humidity stability over a control device in which FAPbI3 was stabilized by MAPbBr3.