RESUMO
BACKGROUND: Continuous exposure of the skin to ultraviolet B (UVB) rays can cause inflammation and photodamage. In previous studies, we observed that the upregulation of nc886, a noncoding RNA (ncRNA), can alleviate UVB-induced inflammation through suppression of the protein kinase RNA (PKR) pathway. We aim to investigate the effect of fermented black ginseng extract (FBGE), which has been shown to increase the expression of nc886, on UVB-induced inflammation in keratinocytes. METHODS: To confirm the cytotoxicity of FBGE, MTT assay was performed, and no significant cytotoxicity was found on human keratinocytes. The efficacies of FBGE were assessed through qPCR, Western blotting, and ELISA analysis which confirmed regulation of UVB-induced inflammation. RESULTS: The analysis results showed that FBGE inhibited the decrease in nc886 expression and the increase in the methylated nc886 caused by UVB. It also prevented the UVB-induced increase of metalloproteinase-9 (MMP-9), metalloproteinase-1 (MMP-1), cyclooxygenase-2 (COX-2), prostaglandin E2 (PGE2), interleukin-8 (IL-8) and tumor necrosis factor-α (TNF-α). Additionally, FBGE suppressed the PKR-MAPK pathways activated by UVB. CONCLUSION: These results implicate that FBGE can alleviate UVB-induced inflammation through regulation of the nc886-PKR pathway.
Assuntos
Queratinócitos , Panax , Humanos , Queratinócitos/metabolismo , Pele , Inflamação/metabolismo , Metaloproteases/metabolismo , Metaloproteases/farmacologia , Raios Ultravioleta/efeitos adversosRESUMO
Vertically aligned two-dimensional (2D) molybdenum disulfide nanoflowers (MoS2 NFs) have drawn considerable attention as a novel functional material with potential for next-generation applications owing to their inherently distinctive structure and extraordinary properties. We report a simple metal organic chemical vapor deposition (MOCVD) method that can grow high crystal quality, large-scale and highly homogeneous MoS2 NFs through precisely controlling the partial pressure ratio of H2S reaction gas, P SR, to Mo(CO)6 precursor, P MoP, at a substrate temperature of 250 °C. We investigate microscopically and spectroscopically that the S/Mo ratio, optical properties and orientation of the grown MoS2 NFs can be controlled by adjusting the partial pressure ratio, P SR/P MoP. It is also shown that the low temperature MOCVD (LT-MOCVD) growth method can regulate the petal size of MoS2 NFs through the growth time, thereby controlling photoluminescence intensity. More importantly, the MoS2 NFs/GaAs heterojunction flexible solar cell exhibiting a power conversion efficiency of â¼1.3% under air mass 1.5 G illumination demonstrates the utility of the LT-MOCVD method that enables the direct growth of MoS2 NFs on the flexible devices. Our work can pave the way for practical, easy-to-fabricate 2D materials integrated flexible devices in optical and photonic applications.
RESUMO
Focus-tunable liquid lens arrays have been used to improve depth in glass-free three-dimensional devices where high fill factor is required. For high fill factors, polygonal apertures should be used, but due to the difficulty of controlling aberrations during focus tuning, polygonal aperture focus-tunable lenses have rarely been studied. This Letter proposes a new structure with walls at the lens boundaries using a square parabolic lens model to control the quadrafoil aberration induced by the square aperture. ANSYS simulation confirmed that the lens surface was closest to the parabolic lens model when the wall thickness was 1.4 mm. A fabricated lens array demonstrated the quadrafoil inhibitory effect and confirmed the utility of the new structure.
RESUMO
In this paper, we introduce a method for improving the lens diopter of 2D/3D convertible devices using electro-wetting. For stable operation, an electro-wetting device requires high dioptric performance and this was achieved using bi-convex liquid-liquid-solid phases. 1-Chloronaphthalene with a refractive index of 1.633 was used as an oil phase to achieve high diopters. ETPTA (trimethylolpropane ethoxylate triacrylate), a UV-sensitive material with low chemical reactivity to the 1-Chloronaphthalene, was used as a chamber material. This resulted in a diopter of 3030D for high quality multi-view images without unstable oil movement or trembling. The ETPTA was molded on a 0.3mm thick glass substrate that was coated with UV adhesive (NOA 81). The maximum diopter capable of stable operation was 3425D. 2D and 3D conversion and parallax motion were demonstrated.
RESUMO
While there are many ways to realize autostereoscopic 2D/3D switchable displays, the electrowetting lenticular lens is superior due to the high optical efficiency and short response time. In this paper, we propose a more stable electrowetting lenticular lens by controlling the quantity of oil. With a large amount of oil, the oil layer was broken and the lenticular lens was damaged at relatively low voltage. Therefore, controlling the amount of oil is crucial to obtain the required dioptric power with stability. We proposed a new structure to evenly adjust the volume of oil and the dioptric power was measured by varying the volume of oil. Furthermore, the optical characteristics were finally analyzed in the electrowetting lenticular lens array with a proper amount of oil.
RESUMO
In this paper, we used a thin polycarbonate (PC) chamber to improve the performance of an electrowetting lenticular lens array. The polycarbonate chamber changed the radius of curvature (ROC) of the oil acting as a lens, which increased the dioptric power of the liquid lens to 1666.7D. The increase in dioptric power required a reduction in the distance between the optical center of the lens and the display pixels under the chamber, which was accomplished by reducing the thickness of the chamber. The optimal thickness of the chamber was determined to be 0.5mm. Using this thin PC chamber, transmittance and viewing angle were measured and compared with an electrowetting lenticular lens with a conventional 1mm poly methyl methacrylate (PMMA) chamber was done. Crosstalk which degrades clear 3D images, is an inevitable factor in lenticular lens type multi-view systems. With the 0.5mm PC chamber, the viewing zone was expanded and the ratio of the crosstalk area was reduced, which resulted in a clear 3D image. The new method of depositing the electrode layer also ensured the uniform operation of the liquid lens array.
RESUMO
This paper proposes an enhanced integral imaging system with an electrically controllable image plane to address the issue of the limited depth problem in integral imaging. For implementation of the variable image plane, a varifocal liquid lens array and driving device are adopted instead of an ordinary solid lens array. The position of the central depth plane is varied by adjusting the focal length of the lens array. The proposed system enables matching between the object position and depth plane electrically, and thus an object moving from 5.15 to 11.72 cm is clearly displayed with this method.
RESUMO
We have performed a shape optimization of the disc in an industrial double-eccentric butterfly valve using the effect analysis of design variables to enhance the valve performance. For the optimization, we select three performance quantities such as pressure drop, maximum stress, and mass (weight) as the responses and three dimensions regarding the disc shape as the design variables. Subsequently, we compose a layout of orthogonal array (L16) by performing numerical simulations on the flow and structure using a commercial package, ANSYS v13.0, and then make an effect analysis of the design variables on the responses using the design of experiments. Finally, we formulate a multiobjective function consisting of the three responses and then propose an optimal combination of the design variables to maximize the valve performance. Simulation results show that the disc thickness makes the most significant effect on the performance and the optimal design provides better performance than the initial design.
Assuntos
Engenharia/métodos , Desenho de Equipamento/métodos , Equipamentos e Provisões/normas , ReologiaRESUMO
Linear gratings polarizers provide remarkable potential to customize the polarization properties and tailor device functionality via dimensional tuning of configurations. Here, we extensively investigate the polarization properties of single- and double-layer linear grating, mainly focusing on self-aligned bilayer linear grating (SABLG), serving as a wire grid polarizer in the mid-wavelength infrared (MWIR) region. Computational analyses revealed the polarization properties of SABLG, highlighting enhancement in TM transmission and reduction in TE transmission compared to single-layer linear gratings (SLG) due to optical cavity effects. As a result, the extinction ratio is enhanced by approximately 2724-fold in wavelength 3-6 µm. Furthermore, integrating the specially designed SABLG with an MWIR InAs/GaSb Type-II Superlattice (T2SL) photodetector yields a significantly enhanced spectral responsivity. The TM-spectral responsivity of SABLG is enhanced by around twofold than the bare device. The simulation methodology and analytical analysis presented herein provide a versatile route for designing optimized polarimetric structures integrated into infrared imaging devices, offering superior capabilities to resolve linear polarization signatures.
RESUMO
This study has established a robust and straightforward method for the fabrication of uniform poly(vinylamine) hydrogel capsules without using templates that combines the dispersion polymerization and the sequential hydrolysis/cross-linking. The particle sizes are determined by the degree of cross-linking as well as by the cross-linking reaction time, while the shell thickness is independent of these variables. Diffusion-limited reactions occur at the periphery of the particles, leading to the formation of hydrogel shells with a constant thickness. The treatment of the surfaces of hollow hydrogel capsules with oppositely charged biopolymers limits the permeability through the shell of species even with low molecular weights less than 400 g/mol. Furthermore, we demonstrated that the hydrogel shell phase decorated with Au nanoparticles can be optically ruptured by exposure to laser pulse, a feature that has potential uses in optically responsive drug delivery.
RESUMO
Corneocytes represents the main water reservoir of stratum corneum, and that ability intimately arises from their architecture and total composition. Here we describe a novel method for fabricating a microgel-in-liposome (M-i-L) structure consisting of a sodium hyaluronate microgel and a lipid membrane envelop in order to mimic corneocyte cell structures. The essence of our approach is to use a lecithin-based microemulsion with a very low interfacial tension between the water droplet and oil continuous phase. Using this emulsion enables us to stabilize a dispersion of microgel particles without phase separation or aggregation. The addition of excess water produced single-core or multicore microgel particles enveloped in a lipid layer. To demonstrate the applicability of this unique vesicle system, we encapsulated a high concentration of natural moisturizing factor (NMF) in the microgel core and investigated how the M-i-L structure affected the water retention in comparison with other control systems. We have observed that our M-i-L particles with the NMF in the core, which mimicked the corneocyte cell structure, showed an excellent ability to retain water in the system. This experimental result inspired us to investigate how corneocyte cells, which feature a lipid-enveloped hydrogel structure, provide such long-lasting hydration to the skin.
Assuntos
Lipídeos/química , Lipossomos/química , Água/química , Lipídeos de Membrana/químicaRESUMO
Natural products and their derivatives historically represent alternatives to conventional synthetic molecules for pharmacotherapy, ranging from cancer chemotherapeutics to cosmetic ingredients that exert anti-aging activities. Cellular senescence is considered a main driver of skin aging, yet natural products that target skin senescence in a specific manner are not thoroughly explored. Here, we performed a focused compound screen to identify natural products that exert anti-senescence effects. We found that Isatis tinctoria, woad extracts, displayed a senolytic effect on senescent human skin fibroblasts. Furthermore, treatment with woad extracts attenuated the expression of pro-inflammatory senescence-associated secretory phenotype (SASP), showing a senostatic activity. Intriguingly, woad extracts displayed only a marginal cytotoxic effect toward senescent human lung fibroblasts. Thus, our results reveal the potential activities of woad extracts for targeting skin senescence and suggest that woad extracts could be an attractive ingredient for cosmetics to prevent skin aging.
RESUMO
Senescent fibroblasts progressively deteriorate the functional properties of skin tissue. Senescent cells secrete senescence-associated secretory phenotype (SASP) factor, which causes the aging of surrounding non-senescent cells and accelerates aging in the individuals. Recent findings suggested the senomorphic targeting of the SASP regulation as a new generation of effective therapeutics. We investigated whether Isatis tinctoria L. leaf extract (ITE) inhibited senescence biomarkers p53, p21CDKN1A, and p16INK4A gene expression, and SASP secretions by inhibiting cellular senescence in the replicative senescent human dermal fibroblast (RS-HDF). ITE has been demonstrated to inhibit the secretion of SASP factors in several senomorphic types by regulating the MAPK/NF-κB pathway via its inhibitory effect on mTOR. ITE suppressed the inflammatory response by inhibiting mTOR, MAPK, and IκBα phosphorylation, and blocking the nuclear translocation of NF-κB. In addition, we observed that autophagy pathway was related to inhibitory effect of ITE on cellular senescence. From these results, we concluded that ITE can prevent and restore senescence by blocking the activation and secretion of senescence-related factors generated from RS-HDFs through mTOR-NF-κB regulation.
Assuntos
Isatis , NF-kappa B , Senescência Celular , Fibroblastos , Isatis/metabolismo , NF-kappa B/metabolismo , Extratos Vegetais/metabolismo , Extratos Vegetais/farmacologia , Senoterapia , Serina-Treonina Quinases TOR/metabolismoRESUMO
The aim of this study was to investigate the antioxidant properties of the ethanol extract of the flower of Camellia japonica (Camellia extract). Camellia extract exhibited 1,1-diphenyl-2-picrylhydrazyl radical and intracellular reactive oxygen species (ROS) scavenging activity in human HaCaT keratinocytes. In addition, Camellia extract scavenged superoxide anion generated by xanthine/xanthine oxidase and hydroxyl radical generated by the Fenton reaction (FeSO(4) + H(2)O(2)) in a cell-free system, which was detected by electron spin resonance spectrometry. Furthermore, Camellia extract increased the protein expressions and activity of cellular antioxidant enzymes, such as superoxide dismutase, catalase and glutathione peroxidase. These results suggest that Camellia extract exhibits antioxidant properties by scavenging ROS and enhancing antioxidant enzymes. Camellia extract contained quercetin, quercetin-3-O-glucoside, quercitrin and kaempferol, which are antioxidant compounds.
Assuntos
Antioxidantes/química , Camellia/química , Oxirredutases/metabolismo , Extratos Vegetais/química , Espécies Reativas de Oxigênio/metabolismo , Antioxidantes/farmacologia , Camellia/metabolismo , Catalase/metabolismo , Linhagem Celular , Sobrevivência Celular/efeitos dos fármacos , Etanol/química , Flores/química , Flores/metabolismo , Glutationa Peroxidase/metabolismo , Humanos , Extratos Vegetais/farmacologia , Superóxido Dismutase/metabolismoRESUMO
Several studies have reported that a drug nanocarrier conjugated with ligands having cell binding ability improves drug delivery performance, but multiple cell-targeting and the resultant activation in designated cells has not been investigated yet. This study reports a skin cell multi-targeting vesicular nanocargo system. We selectively conjugated several skin protein-derived cell-targeting peptides (CTPs), including KTTKS, NAP-amide, and Lam332, to amphiphilic polymer-reinforced lipid nanovesicles (PLNVs) to specifically target fibroblasts, melanocytes, and keratinocytes, respectively, through effective association with the corresponding cell membrane receptors. We then showed that CTP-conjugated PLNVs specifically bind to the designated skin cells, even in a mixture of different types of skin cells, eventually leading to skin cell multi-targeting and consequent activation. These results highlight that this CTP-conjugated PLNV system has significant potential for developing an intelligent cellular drug delivery technology for dermatological applications.
Assuntos
Nanoestruturas/química , Peptídeos/química , Peptídeos/farmacologia , Pele/metabolismo , Queratinócitos/metabolismo , Ligantes , Lipossomos , Peptídeos/metabolismo , Pele/efeitos dos fármacosRESUMO
It is known that cyclodextrins (CDs) extract lipid components from bilayer of liposomes. This could undermine the potential benefits of liposomes as drug carriers. In this study, we demonstrated that PC-Chol liposomes with various CDs or rhapontin (Rh)-hydroxypropyl betaCD (HPbetaCD) complexes could be stabilized by association with the amphiphilic polyelectrolyte, poly(methacrylic acid-co-stearyl methacrylate). Based on the results of differential scanning calorimetry, photocorrelation spectroscopy and transmission electron microscopy, the polymer-associated liposomes had the same vesicular form as liposome with clear boundaries and retained structural integrity for at least 1 month. In addition, the polymer-associated structure was unaffected by the type of CD, the composition and concentration of lipid components, and the concentration of the Rh-HPbetaCD complex. This contrasted with PC-Chol liposomes, whose structure was dependent on these factors. Using structurally different polymer-associated liposomes and PC-Chol liposomes containing the Rh-HPbetaCD complex, we also showed that the stability of vesicles could influence the skin permeability of CD-drug complexes.
Assuntos
Ciclodextrinas/química , Bicamadas Lipídicas/química , Metacrilatos/química , Estilbenos/química , Lipossomos , Tamanho da PartículaRESUMO
Delivery activity of pH-sensitive 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE):cholesteryl hemisuccinate (CHEMS) liposomes was assessed as an in vitro intracellular carrier system to increase the bioavailability of depigmentation actives. N-glycosylation inhibitors have a glycosylation-inhibiting effect, which is useful for the skin depigmentation that operates by interfering with the maturation of tyrosinase. However, an N-glycosylation inhibitor does not easily pass through skin or even cellular membranes due to its water-soluble property. Therefore, it should be transported to target cells by an efficient delivery carrier to reduce the glycosylated tyrosinase. Glycosylation-inhibiting and depigmentation effects of N-butyldeoxynojirimycine (NB-DNJ) and 1-deoxynojirimycine (DNJ)-loaded liposomes were evaluated using Western blotting and measurement of synthesized melanin. Interestingly, it was found that the pH-sensitive liposomes increased the glycosylation-inhibiting and thus, pigment-lightening effects of N-glycosylation inhibitors in vitro. In addition, cargo materials loaded in pH-sensitive liposomes were found to be much more efficiently delivered into the cytoplasm, as observed in fluorescent-activated cell sorting (FACS) and confocal laser-scanning microscopic (CLSM) analysis. These results indicate that pH-sensitive DOPE:CHEMS liposomes have a strong potential as a carrier system to promote delivery efficiency and to enhance the biological effects of water-soluble actives for applications in cosmetics, personal care products, and pharmaceutics.
Assuntos
Ésteres do Colesterol/administração & dosagem , Glucosamina/análogos & derivados , Lipossomos/administração & dosagem , Melaninas/metabolismo , Fosfatidiletanolaminas/administração & dosagem , Pigmentação/efeitos dos fármacos , 1-Desoxinojirimicina/administração & dosagem , Western Blotting , Linhagem Celular Tumoral , Sistemas de Liberação de Medicamentos , Glucosamina/administração & dosagem , Glicosilação/efeitos dos fármacos , Humanos , Concentração de Íons de Hidrogênio , Melaninas/análise , Melanoma/metabolismo , Microscopia ConfocalRESUMO
Recently, a planoconvex structure electrowetting lenticular lens capable of 2D/3D conversion through a varifocal property by an electrowetting phenomenon has been developed. However, even though it has a similar planoconvex structure to that of a commercial solid lenticular lens, comparable 3D performance could not be realized because the refractive index difference between nonconductive liquid and conductive liquid was not large. Therefore, the goal of the present study is to obtain better 3D performance compared to the conventional planoconvex structure by introducing a novel biconvex structure using ETPTA. The newly developed biconvex structure electrowetting lenticular lens showed greatly improved characteristics compared to the planoconvex structure: dioptric power (171.69D â 1,982.56D), viewing angle (26degrees â 46degrees), and crosstalk ratio (27.27% â 16.18%). Thanks to these improvements, a fine 3D image and a natural motion parallax could be observed with the biconvex structure electrowetting lenticular lens. In addition, the novel biconvex structure electrowetting lenticular lens was designed to achieve a plane lens state with a no voltage applied condition, and as such it could show a clean 2D image at 0 V. In conclusion, a novel biconvex structure electrowetting lenticular lens showed 2D/3D switchable operation as well as excellent 3D performance compared to a solid lenticular lens.
RESUMO
In the current study, we examined the effect of polymer characteristics on the structure of complexes formed between poly(methacrylic acid-co-n-alkyl methacrylate) and with phosphatidylcholine/cholesterol liposomes. We varied the polymer concentration in the vesicles, the preparation concentration of lipid and polymer components during preparation, the molecular weight of the polymer chain, the molecular weight of the polymer's hydrophobic side groups and their mole fraction. The vesicle behavior indicated polymer-free bilayers and bilayers complexed with polymer coexisted at low polymer concentrations. As the polymer concentration exceeds a critical level, however, the system became homogeneous, indicating bilayer uniformity of the bilayer. As the polymer content was raised, the vesicle size and fluidity increased, and the transition temperature decreased. We found that the vesicle size mostly affects the membrane fluidity. We also found that the thermal properties (transition temperature and the magnitude of heat capacity of the peak, DeltaCp) are governed by the effects of the polymer on the structure of bilayer. The length of the alkyl chain of the polymer is shown to significantly affect the structure of polymer-liposome complexes, as did the chain molecular weight and mole concentration of hydrophobic group in the polymer.
Assuntos
Lipossomos/química , Metacrilatos/química , Polímeros/química , Colesterol/química , Metacrilatos/síntese química , Tamanho da Partícula , Fosfatidilcolinas/química , Polímeros/síntese química , Propriedades de Superfície , TemperaturaRESUMO
AIMS: Although mitral cerclage annuloplasty can reduce mitral regurgitation, the potential risks for erosion of the surrounding tissue or conduction blockage are barriers to human translation. This preclinical study aimed to provide a proof of concept for a novel approach, mitral loop cerclage (MLC), designed to address these shortcomings. METHODS AND RESULTS: MLC consists of: (1) a novel appliance termed a coronary sinus and tricuspid valve protective device (CSTV) that includes a tension locker, and (2) a nylon-coated, braided stainless steel rope (0.6 mm thick) with a coronary artery protective device in a single unit (cerclage rope). Nine healthy farm swine underwent MLC in short-term (two weeks, n=4) and midterm (six weeks, n=5) survival experiments under X-ray fluoroscopic guidance imaging. The procedural success rate was 100%. MLC resulted in a significant reduction of the septal lateral dimension of the mitral annulus (24.58±2.16 vs. 21.26±1.43 mm, p=0.04) and left ventricular (LV) volume in diastole (75.9±3.9 vs. 70.6±5.0 ml, p=0.04) in the midterm group. No conduction abnormalities or serious complications were noted beyond trivial tricuspid regurgitation in all cases (n=9). Necropsy showed no evidence of tissue erosion and an excellent biocompatibility of the implanted devices. CONCLUSIONS: MLC, as a novel approach for catheter-based mitral valve repair, appeared feasible in this short-term preclinical model. Further studies with longer follow-up in a cardiomyopathic animal model are needed to verify the clinical feasibility and safety of MLC.