High-speed and large-scale intrinsically stretchable integrated circuits.

Intrinsically stretchable electronics with skin-like mechanical properties have been identified as a promising platform for emerging applications ranging from continuous physiological monitoring to real-time analysis of health conditions, to closed-loop delivery of autonomous medical treatment1-7. However, current technologies could only reach electrical performance at amorphous-silicon level (that is, charge-carrier mobility of about 1 cm2 V-1 s-1), low integration scale (for example, 54 transistors per circuit) and limited functionalities8-11. Here we report high-density, intrinsically stretchable transistors and integrated circuits with high driving ability, high operation speed and large-scale integration. They were enabled by a combination of innovations in materials, fabrication process design, device engineering and circuit design. Our intrinsically stretchable transistors exhibit an average field-effect mobility of more than 20 cm2 V-1 s-1 under 100% strain, a device density of 100,000 transistors per cm2, including interconnects and a high drive current of around 2 µA µm-1 at a supply voltage of 5 V. Notably, these achieved parameters are on par with state-of-the-art flexible transistors based on metal-oxide, carbon nanotube and polycrystalline silicon materials on plastic substrates12-14. Furthermore, we realize a large-scale integrated circuit with more than 1,000 transistors and a stage-switching frequency greater than 1 MHz, for the first time, to our knowledge, in intrinsically stretchable electronics. Moreover, we demonstrate a high-throughput braille recognition system that surpasses human skin sensing ability, enabled by an active-matrix tactile sensor array with a record-high density of 2,500 units per cm2, and a light-emitting diode display with a high refreshing speed of 60 Hz and excellent mechanical robustness. The above advancements in device performance have substantially enhanced the abilities of skin-like electronics.

Correction: Kim, M.-G.; Pan, S.B. A Study on User Recognition Using the Generated Synthetic Electrocardiogram Signal. Sensors 2021, 21, 1887.

In the original publication [...].

The Design of GNSS/IMU Loosely-Coupled Integration Filter for Wearable EPTS of Football Players.

This study presents the filter design of GNSS/IMU integration for wearable EPTS (Electronic Performance and Tracking System) of football players. EPTS has been widely used in sports fields recently, and GNSS (Global Navigation Satellite System) and IMU (Inertial Measurement Unit) in wearable EPTS have been used to measure and provide players' athletic performance data. A sensor fusion technique can be used to provide high-quality analysis data of athletic performance. For this reason, the integration filter of GNSS data and IMU data is designed in this study. The loosely-coupled strategy is considered to integrate GNSS and IMU data considering the specification of the wearable EPTS product. Quaternion is used to estimate a player's attitude to avoid the gimbal lock singularity in this study. Experiment results validate the performance of the proposed GNSS/IMU loosely-coupled integration filter for wearable EPTS of football players.

Dexmedetomidine-Induced Aortic Contraction Involves Transactivation of the Epidermal Growth Factor Receptor in Rats.

In this study, we examined whether aortic contraction, induced by the alpha-2 adrenoceptor agonist dexmedetomidine, is involved in the transactivation of the epidermal growth factor receptor (EGFR) in isolated endothelium-denuded rat aortas. Additionally, we aimed to elucidate the associated underlying cellular mechanisms. The effects of the alpha-2 adrenoceptor inhibitor rauwolscine, EGFR tyrosine kinase inhibitor AG1478, Src kinase inhibitors PP1 and PP2, and matrix metalloproteinase inhibitor GM6001 on EGFR tyrosine phosphorylation and c-Jun NH2-terminal kinase (JNK) phosphorylation induced by dexmedetomidine in rat aortic smooth muscles were examined. In addition, the effects of these inhibitors on dexmedetomidine-induced contraction in isolated endothelium-denuded rat aorta were examined. Dexmedetomidine-induced contraction was inhibited by the alpha-1 adrenoceptor inhibitor prazosin, rauwolscine, AG1478, PP1, PP2, and GM6001 alone or by a combined treatment with prazosin and AG1478. AG1478 (3 × 10-6 M) inhibited dexmedetomidine-induced contraction in isolated endothelium-denuded rat aortas pretreated with rauwolscine. Dexmedetomidine-induced EGFR tyrosine and JNK phosphorylation were inhibited by rauwolscine, PP1, PP2, GM6001, and AG1478. Furthermore, dexmedetomidine-induced JNK phosphorylation reduced upon EGFR siRNA treatment. Therefore, these results suggested that the transactivation of EGFR associated with dexmedetomidine-induced contraction, mediated by the alpha-2 adrenoceptor, Src kinase, and matrix metalloproteinase, caused JNK phosphorylation and increased calcium levels.

A Fully-Human Antibody Specifically Targeting a Membrane-Bound Fragment of CADM1 Potentiates the T Cell-Mediated Death of Human Small-Cell Lung Cancer Cells.

Small-cell lung cancer (SCLC) is the most aggressive form of lung cancer and the leading cause of global cancer-related mortality. Despite the earlier identification of membrane-proximal cleavage of cell adhesion molecule 1 (CADM1) in cancers, the role of the membrane-bound fragment of CAMD1 (MF-CADM1) is yet to be clearly identified. In this study, we first isolated MF-CADM1-specific fully human single-chain variable fragments (scFvs) from the human synthetic scFv antibody library using the phage display technology. Following the selected scFv conversion to human immunoglobulin G1 (IgG1) scFv-Fc antibodies (K103.1-4), multiple characterization studies, including antibody cross-species reactivity, purity, production yield, and binding affinity, were verified. Finally, via intensive in vitro efficacy and toxicity evaluation studies, we identified K103.3 as a lead antibody that potently promotes the death of human SCLC cell lines, including NCI-H69, NCI-H146, and NCI-H187, by activated Jurkat T cells without severe endothelial toxicity. Taken together, these findings suggest that antibody-based targeting of MF-CADM1 may be an effective strategy to potentiate T cell-mediated SCLC death, and MF-CADM1 may be a novel potential therapeutic target in SCLC for antibody therapy.

A Study on User Recognition Using the Generated Synthetic Electrocardiogram Signal.

Electrocardiogram (ECG) signals are time series data that are acquired by time change. A problem with these signals is that comparison data that have the same size as the registration data must be acquired every time. A network model of an auxiliary classifier based generative adversarial neural network that is capable of generating synthetic ECG signals is proposed to resolve the data size inconsistency problem. After constructing comparison data with various combinations of the real and generated synthetic ECG signal cycles, a user recognition experiment was performed by applying them to an ensemble network of parallel structure. Recognition performance of 98.5% was demonstrated when five cycles of real ECG signals were used. Moreover, 98.7% and 97% accuracies were provided when the first cycle of synthetic ECG signals and the fourth cycle of real ECG signals were repetitively used as the last cycle, respectively, in addition to the four cycles of real ECG. When two cycles of synthetic ECG signals were used with three cycles of real ECG signals, 97.2% accuracy was shown. When the last third cycle was repeatedly used with the three cycles of real ECG signals, the accuracy was 96%, which was 1.2% lower than the performance obtained while using the synthetic ECG. Therefore, even if the size of the registration data and that of the comparison data are not consistent, the generated synthetic ECG signals can be applied to a real life environment, because a high recognition performance is demonstrated when they are applied to an ensemble network of parallel structure.

Effect of COD/N ratio on denitrification from nitrite.

The objective of this study was to investigate dynamic specific denitrification rates (SDNRs) from nitrite at various chemical oxygen demand (COD)/nitrogen (N) ratios using municipal wastewater (MWW). A sequencing batch reactor (SBR) continuously fed with primary effluent and nitrite solution was operated at hydraulic retention time of 8.4 hr and solids retention time of 26-30 days for 3 months. Influent MWW characteristics varied significantly during the study, that is, 200-810 mgCOD/L and 6-80 mgN/L. The SDNRs from the SBR were compared with those determined in four batch reactors using acetate. The SDNR was directly related to COD/N until a maximum SDNR (mgNO2 -N/mgVSS/day) of 0.07 for MWW and 0.4 for acetate occurred at COD/N ratios of 6 and 13, respectively; beyond this COD/N ratio, SDNR decreased. The biomass yield coefficients (mgVSS/mgCOD) were 0.33 for MWW and 0.51 for acetate. The relationships of SDNR with COD/N and F/M ratios were developed. PRACTITIONER POINTS: The optimum carbon dose for denitrification should be determined using acclimatized biomass. Each carbon source should only be dosed at an optimum that maximizes denitrification.

Enhanced biological phosphorus removal using thermal alkaline hydrolyzed municipal wastewater biosolids.

This study reports the feasibility of using municipal wastewater biosolids as an alternative carbon source for biological phosphorus removal. The biosolids were treated by a low-temperature, thermal alkaline hydrolysis process patented by Lystek International Inc. (Cambridge, ON, Canada) to produce short-chain volatile fatty acids and other readily biodegradable organics. Two sequencing batch reactors (SBRs) were operated with synthetic volatile fatty acids (SynVFA) and readily biodegradable organics produced from the alkaline hydrolysis of municipal wastewater biosolids (Lystek) as the carbon source, respectively. Municipal wastewaters with different strengths and COD:N:P ratios were tested in the study. The reactors' performances were compared with respect to nitrogen and phosphorus removal. It was observed that phosphorus removal efficiencies were between 98%-99% and 90%-97% and nitrogen removal efficiencies were 78%-81%, and 67% for the SynVFA and Lystek, respectively. However, the kinetics for phosphorus release and uptake during the anaerobic and aerobic stages with Lystek were observed to be significantly lower than SynVFA due to the presence of higher order VFAs (C4 and above) and other fermentable organics in the Lystek.

Acute and chronic toxicity of nickel to nitrifiers at different temperatures.

This study investigated the acute nickel toxicity on nitrification of low ammonia synthetic wastewater at 10, 23, and 35°C. The nickel inhibition half-velocity constants (KI,Ni) for ammonia oxidizing bacteria (AOB) and nitrite oxidizing bacteria (NOB) based on Ni/MLSS ratio at 10, 23, and 35°C were 5.4 and 5.6 mg Ni/g MLSS, 4.6 and 3.5 mg Ni/g MLSS, and 9.1 and 2.7 mg Ni/g MLSS, respectively. In addition, chronic toxicity of nickel to nitrification of low ammonia synthetic wastewater was investigated at 10°C in two sequencing batch reactors (SBRs). Long-term SBRs operation and short-term batch tests were comparable with respect to the extent of inhibition and corresponding Ni/MLSS ratio. The µmax, b, and Ko of AOB were 0.16 day-1, 0.098 day-1 and 2.08 mg O2/L after long-term acclimatization to nickel of 1 mg/L at 10°C, high dissolved oxygen (DO) (7 mg/L) and long solids retention time (SRT) of 63-70 days. Acute nickel toxicity of nitrifying bacteria was completely reversible.

Performance and Kinetics of Nitrification of Low Ammonia Wastewater at Low Temperature.

The objective of this study was to investigate the effect of dissolved oxygen on nitrification in a sequencing batch reactor (SBR) treating low ammonia wastewater (40 mg N/L) at a low temperature (14 °C). During the 130 days of operation, three dissolved oxygen levels (5-6 mg dissolved oxygen/L, 2-3 mg dissolved oxygen/L, and 0.8-1.0 mg dissolved oxygen/L) were tested. Dissolved oxygen reduction resulted in lower ammonia oxidizing bacteria (AOB) and nitrite oxidizing bacteria (NOB) activity, with decreasing ammonia conversion ratio and increasing nitrite accumulation ratio. The maximum growth rates of AOB and NOB determined in this study (0.28 and 0.38 d-1) were below the median values from the literature (0.47 and 0.62 d-1), whereas the oxygen half-saturation coefficients of AOB and NOB (1.36 and 2.79 mg/L) were higher than those found in the literature. The kinetic model explained the SBR performance well. Low dissolved oxygen, together with long solids retention time, was recommended for partial nitrification at a low temperature.

Flocculent Settling of Food Wastes.

This study evaluated the flocculent settling in water and municipal wastewater (MWW) in a 10.6 ft deep column. A total of eight runs at three different testing conditions involving MWW alone, food waste (FW) alone, and FW in MWW (FW+MWW) were conducted. Total suspended solid (TSS), total BOD (TBOD), total COD (TCOD), total nitrogen (TN), and total phosphorous (TP) removal efficiencies after 3 hours of settling were 62%, 46%, 49%, 46% and 62% for FW, and 50%, 43%, 39%, 37% and 24% for MWW. Removal efficiencies of particulate COD (PCOD) and particulate BOD (PBOD) at the lowest surface overflow rate (SOR) of 1.1 m3/m2/hr corresponding to the longest settling time of 3 hours were 59% and 64% for FW, and 65% and 70% for FW with MWW samples. On the other hand, no significant variation between FW and FW with MWW was observed for PN removal after 3 hours of settling.

Effect of thermal shock and sustained heat treatment on mainstream partial nitrification and microbial community in sequencing batch reactors.

In order to develop a promising means of achieving mainstream short-cut nitrification, this study evaluated the effect of thermal shock on nitrite accumulation using intermittent offline and continuous inline heat treatment of biomass in sequencing batch reactors (SBRs). The SBRs fed with municipal wastewater were operated at a solid retention time of 7 days and nitrogen loading rate of 0.04 gN/L·d to 0.08 gN/L·d without the application of pre-treatment. Contrary to literature studies that showed suppression of nitrite-oxidizing bacteria at temperature 60 to 80 °C, nitrite accumulation was achieved temporarily when 20% of the biomass was heated for 2 h at 47 °C, as well as in continuously heated SBRs at 37 °C and 42 °C. The continuously heated reactors at 37 °C and 42 °C produced a maximum nitrite accumulation ratio (NAR) of 0.59 and 0.79, respectively, whereas the intermittent offline heating at 47 °C-2 h produced a NAR of 0.37. Although nitrite accumulation was stable only for 10-12 days in all heated reactors, this study demonstrates the achievement of mainstream partial nitrification (PN) at lower temperature (42 °C) than that reported in literature and also highlights the potential for achieving PN by implementing heat treatment of a portion of the return activated sludge (RAS) in biological nitrogen removal (BNR) systems. During the time when full nitrification was achieved, Nitrospira was more dominant than Nitrosomonas in all reactors at ratios of 1.4:1, 2.4:1, 2.4:1, and 3.7:1 for the control SBR (22 °C), 47 °C -2 h offline heating SBR, 37 °C SBR, and 42 °C SBR, respectively, suggesting that it may have played a role as a comammox bacteria capable of degrading ammonia to nitrates at elevated temperature.

J-MISFET Hybrid Dual-Gate Switching Device for Multifunctional Optoelectronic Logic Gate Applications.

High-performance and low operating voltage are becoming increasingly significant device parameters to meet the needs of future integrated circuit (IC) processors and ensure their energy-efficient use in upcoming mobile devices. In this study, we suggest a hybrid dual-gate switching device consisting of the vertically stacked junction and metal-insulator-semiconductor (MIS) gate structure, named J-MISFET. It shows excellent device performances of low operating voltage (<0.5 V), drain current ON/OFF ratio (∼4.7 × 105), negligible hysteresis window (<0.5 mV), and near-ideal subthreshold slope (SS) (60 mV/dec), making it suitable for low-power switching operation. Furthermore, we investigated the switchable NAND/NOR logic gate operations and the photoresponse characteristics of the J-MISFET under the small supply voltage (0.5 V). To advance the applications further, we successfully demonstrated an integrated optoelectronic security logic system comprising 2-electric inputs (for encrypted data) and 1-photonic input signal (for password key) as a hardware security device for data protection. Thus, we believe that our J-MISFET, with its heterogeneous hybrid gate structures, will illuminate the path toward future device configurations for next-generation low-power electronics and multifunctional security logic systems in a data-driven society.

Effects of trace elements on digester performance and microbial community response in anaerobic digestion systems.

Trace elements (TE), as micronutrients for microorganisms, have a significant impact on the stability of anaerobic digestion (AD). Studies have been conducted on process stability and performance of the AD of food waste (FW) by supplementing TEs. In this study, mesophilic batch biomethane potential (BMP) tests using FW were conducted to investigate the effect of TEs (Fe, Ni, Co, Se, and Mo) as single and mixed ions. In view of their scarcity, correlations between the microbial community and digester performance such as first-order hydrolysis coefficient (Kh), volatile fatty acids (VFA), methane yield, and methane production rate (MPR) have been developed. Ni2+ at 1 and 1.5 mg/L increased the methane yield by 27% and 23% respectively. Similarly, Co2+ at 0.1 and 0.5 mg/L increased the yield by 21% and 23% respectively, compared to control. Although Se4+ at all concentrations enhanced the methane yield, Fe2+ at only 50 mg/L increased methane yield by 22%. For mixed TEs, the combination of Ni2+ [1 mg/L] +Co2+ was the best and increased methane for all Co2+ concentrations (0.1, 0.4 and 0.5 mg/L) by 16%, 14% and 12% respectively. Firmicutes and Methanosaeta were the most abundant phyla among hydrolytic and methanogenic microbial groups, respectively, constituting 42%-61% and 60-80% of their respective microbial groups. The most significant positive correlations were observed between aceto/acidogenic microorganisms and final VFA concentrations with Pearson correlation factors of 0.91.

Lipid emulsion inhibits the cardiac toxicity caused by chloroquine via inhibition of reactive oxygen species production.

BACKGROUND: Lipid emulsion (LE) is effective in treating intractable cardiac depression induced by the toxicity of highly lipid-soluble drugs including local anesthetics. However, the effect of LE on chloroquine (CQ)-evoked cardiac toxicity remains unclear. This study aimed to examine the effect of Lipofundin MCT/LCT, an LE, on the cardiotoxicity caused by CQ in H9c2 rat cardiomyoblasts and elucidate the underlying cellular mechanism. METHODS: The effects of CQ (1 × 10-4 M), LE, and the reactive oxygen species (ROS) scavengers mitotempo and N-acetyl-L-cysteine (NAC), alone or combined, on cell viability and migration, apoptosis, ROS production, calcium levels, mitochondrial membrane potential, and adenosine triphosphate (ATP) were examined. Additionally, the effects of LE on the activities of catalase (CAT), malondialdehyde (MDA), and superoxide dismutase (SOD) induced by CQ were assessed. RESULTS: Pretreatment with LE, mitotempo, or NAC reversed the reduction in cell migration and viability, mitochondrial membrane potential, and ATP levels evoked by CQ, and inhibited the increase in cleaved caspase-3, ROS, and calcium concentration induced by CQ. LE inhibited the increase in Bax expression, terminal deoxynucleotidyl transferase dUTP nick end labeling-positive cells, MDA activity, and late apoptosis, and reversed the reduction in SOD and CAT activity induced by CQ. CQ did not significantly affect cleaved caspase-8 expression, and LE did not significantly affect CQ concentration. CONCLUSIONS: Collectively, these results suggest that LE (Lipofundin MCT/LCT) inhibits the cardiotoxicity and late apoptosis induced by CQ toxicity via the intrinsic mitochondrial apoptotic pathway that is associated with direct inhibition of ROS production.

A survey and proposed framework on the soft biometrics technique for human identification in intelligent video surveillance system.

Biometrics verification can be efficiently used for intrusion detection and intruder identification in video surveillance systems. Biometrics techniques can be largely divided into traditional and the so-called soft biometrics. Whereas traditional biometrics deals with physical characteristics such as face features, eye iris, and fingerprints, soft biometrics is concerned with such information as gender, national origin, and height. Traditional biometrics is versatile and highly accurate. But it is very difficult to get traditional biometric data from a distance and without personal cooperation. Soft biometrics, although featuring less accuracy, can be used much more freely though. Recently, many researchers have been made on human identification using soft biometrics data collected from a distance. In this paper, we use both traditional and soft biometrics for human identification and propose a framework for solving such problems as lighting, occlusion, and shadowing.

Kinetics of aerobic cellulose degradation in raw municipal wastewater.

Cellulose contributes approximately one third of the influent suspended solids to wastewater treatment plants and is a key target for resource recovery. This study investigated the temperature impact on biological aerobic degradation of cellulose in laboratory-scale sequencing batch reactors (SBR) at four different temperatures (10-33 °C) and two different solids retention times (SRT) of 15 days and 3 days. The degradation efficiency of cellulose was observed to increase with temperature and was slightly dependent on SRT (80%-90% at an SRT of 15 days, and 78%-85% at an SRT of 3 days). Hydrolysis followed 1st order kinetics, rather than the biomass dependent Contois kinetics (default in the activated sludge models), with a hydrolysis coefficient at 20 °C of 1.14 ± 0.01 day-1.

Graphene Bridge Heterostructure Devices for Negative Differential Transconductance Circuit Applications.

Two-dimensional van der Waals (2D vdW) material-based heterostructure devices have been widely studied for high-end electronic applications owing to their heterojunction properties. In this study, we demonstrate graphene (Gr)-bridge heterostructure devices consisting of laterally series-connected ambipolar semiconductor/Gr-bridge/n-type molybdenum disulfide as a channel material for field-effect transistors (FET). Unlike conventional FET operation, our Gr-bridge devices exhibit non-classical transfer characteristics (humped transfer curve), thus possessing a negative differential transconductance. These phenomena are interpreted as the operating behavior in two series-connected FETs, and they result from the gate-tunable contact capacity of the Gr-bridge layer. Multi-value logic inverters and frequency tripler circuits are successfully demonstrated using ambipolar semiconductors with narrow- and wide-bandgap materials as more advanced circuit applications based on non-classical transfer characteristics. Thus, we believe that our innovative and straightforward device structure engineering will be a promising technique for future multi-functional circuit applications of 2D nanoelectronics.

Simultaneous nitrification-denitrifying phosphorus removal (SNDPR) at low DO for treating carbon-limited municipal wastewater.

This study investigated simultaneous nitrification-denitrifying phosphorus removal in a sequencing batch reactor (SBR) activated sludge process. The process consisted of an extended anaerobic period (180 min) followed by a low DO (0.3 ± 0.05 mg/L) simultaneous nitrification-denitrifying phosphorus removal. The reactor was operated within a wide range of COD/N ratio (5-10) without any volatile fatty acids (VFA) supplementation. N and P removal efficiencies were as high as 91% and 96%, respectively. The process was efficient even at a very low COD /N ratio of 5, with N and P removal efficiencies of 70% and 90%, respectively. The N and P removal efficiencies improved to more than 90% at a COD/N ratio 8. It was found that the initial filtered flocculated COD (ffCOD)/[total oxidized Kjeldahl Nitrogen (TKNoxidized) + NOx-Nintitial] ratio in the reactor played a significant role in the process efficiency. It was observed that N-removal efficiency decreased with a decrease of [ffCODinitial/ (TKNoxidized + NOx-Ninitial)] ratio even at high COD/N ratio of 10. Simultaneous nitrification denitrification (SND) efficiencies varied between 60%-88% depending on the influent COD/N ratio and [ffCODinitial/ (TKNoxidized + NOx-Ninitial)] ratio in the reactor. Cyclic studies showed a distinct two step phosphorus release in the extended anaerobic period in contrast to the more conventional single step phosphorus release. During the aerobic period, low DO favored denitrifying P-removal without significant accumulation of NO3-N, and NO2-N until all endogenous carbon was consumed. Denitrifying phosphorus accumulating organisms (DPAOs) played a vital role in simultaneous denitrification and phosphorus removal. Aerobic and anoxic P-removal represented about 55% and 45% of the overall phosphorus removal, respectively. Cycle tests showed that DPAOs have a competitive advantage over NOB for nitrite consumption at low DO. The process was found to be carbon efficient as evidenced by the COD/NOx-N ratio of 4.2 for denitrification. Compared to traditional enhanced biological phosphorus removal (EBPR) coupled with exogenous denitrification, this process reduces carbon and oxygen demand for combined N and P removal from municipal wastewater by about 45%, and 35% respectively.