Hydrogenation of Terminal Alkenes Catalyzed by Air-Stable Mn(I) Complexes Bearing an N-Heterocyclic Carbene-Based PCP Pincer Ligand.

Efficient hydrogenations of terminal alkenes with molecular hydrogen catalyzed by well-defined bench stable Mn(I) complexes containing an N-heterocyclic carbene-based PCP pincer ligand are described. These reactions are environmentally benign and atom economic, implementing an inexpensive, earth abundant non-precious metal catalyst. A range of aromatic and aliphatic alkenes were efficiently converted into alkanes in good to excellent yields. The hydrogenation proceeds at 100 °C with catalyst loadings of 0.25-0.5 mol %, 2.5-5 mol % base (KOt Bu) and a hydrogen pressure of 20 bar. Mechanistic insight into the catalytic reaction is provided by means of DFT calculations.

The Effect of Selenium-Based Ligands on Tungsten Acetylene Complexes.

Bioinspired tungsten acetylene complexes containing pyridine-2-selenolato (PySe) or 6-methyl-pyridine-2-selenolato (6-MePySe) ligands were synthesized. 77Se NMR spectroscopy allowed for an assessment of the resonance structures in the pyridine-2-selenolato ligands and the rationalization of chemoselectivity observed in regard to 1,2 migratory insertion of HC≡CH. [W(CO)(C2H2)(CHCH-PySe)(PySe)] is formed exclusively via insertion of HC≡CH into the W-N bond, while the use of bulkier 6-MePySe allows for the isolation of [W(CO)(C2H2)(6-MePySe)2], which only partially reacts with excess HC≡CH to give [W(CO)(C2H2)(CHCH-6-MePySe)(6-MePySe)]. Oxidation of [W(CO)(C2H2)(6-MePySe)2] with pyridine-N-oxide gave the tungsten(IV) complex [WO(C2H2)(6-MePySe)2]. Complexes [W(CO)(C2H2)(6-MePySe)2] and [WO(C2H2)(6-MePySe)2] react with trimethyl phosphine to carbyne complex [W(CO)(CCH2PMe3)(PMe3)2(6-MePySe)]Cl and alkylidene complex [WO(CHCHPMe3)(PMe3)2(6-MePySe)]Cl, respectively. The addition of substituted alkynes to [W(CO)3(PySe)2] via thermal decarbonylation gave complexes [W(CO)(MeC≡CMe)(PySe)2] and [W(CO)(HC≡Ct-Bu)(PySe)2], respectively. The here presented complexes are relevant for the modeling of the active site of acetylene hydratase from Pelobacter acetylenicus, in which a tungsten atom is enclosed in a sulfur-rich coordination sphere. A recently published theoretical study concluded that the exchange of sulfur for selenium would increase the activity of the enzyme. Our findings contrast this claim as comparative analysis concludes negligible structural and electronic differences between the selenium-based and previously published sulfur-based complexes.

Manganese Alkyl Carbonyl Complexes: From Iconic Stoichiometric Textbook Reactions to Catalytic Applications.

The activation of weakly polarized bonds represents a challenging, yet highly valuable process. In this context, precious metal catalysts have been used as reliable compounds for the activation of rather inert bonds for the last several decades. Nevertheless, base-metal complexes including cobalt, iron, or nickel are currently promising candidates for the substitution of noble metals in order to develop more sustainable processes. In the past few years, manganese(I)-based complexes were heavily employed as efficient catalysts for (de)hydrogenation reactions. However, the vast majority of these complexes operate via a metal-ligand bifunctionality as already well implemented for precious metals decades ago. Although high reactivity can be achieved in various reactions, this concept is often not applicable to certain transformations due to outer-sphere mechanisms. In this Account, we outline the potential of alkylated Mn(I)-carbonyl complexes for the activation of nonpolar and moderately polar E-H (E = H, B, C, Si) bonds and disclose our successful approach for the utilization of complexes in the field of homogeneous catalysis. This involves the rational design of manganese complexes for hydrogenation reactions involving ketones, nitriles, carbon dioxide, and alkynes. In addition to that, the reduction of alkenes by dihydrogen could be achieved by a series of well-defined manganese complexes which was not possible before. Furthermore, we elucidate the potential of our Mn-based catalysts in the field of hydrofunctionalization reactions for carbon-carbon multiple bonds. Our investigations unveiled novel insights into reaction pathways of dehydrogenative silylation of alkenes and trans-1,2-diboration of terminal alkynes, which was not yet reported for transition metals. Due to rational catalyst design, these transformations can be achieved under mild reaction conditions. Delightfully, all of the employed complexes are bench-stable compounds. We took advantage of the fact that Mn(I) alkyl complexes are known to undergo migratory insertion of the alkyl group into the CO ligand, yielding an unsaturated acyl intermediate. Hydrogen atom abstraction by the acyl ligand then paves the way to an active species for a variety of catalytic transformations which all proceed via an inner-sphere process. Although these textbook reactions have been well-known for decades, the application in catalytic transformations is still in its infancy. A brief historical overview of alkylated manganese(I)-carbonyl complexes is provided, covering the synthesis and especially iconic stoichiometric transformations, e.g., carbonylation, as intensively examined by Calderazzo, Moss, and others. An outline of potential future applications of defined alkyl manganese complexes will be given, which may inspire researchers for the development of novel (base-)metal catalysts.

No Transition Metals Required - Oxygen Promoted Synthesis of Imines from Primary Alcohols and Amines under Ambient Conditions.

The synthesis of imines denotes a cornerstone in organic chemistry. The use of alcohols as renewable substituents for carbonyl-functionality represents an attractive opportunity. Consequently, carbonyl moieties can be in situ generated from alcohols upon transition-metal catalysis under inert atmosphere. Alternatively, bases can be utilized under aerobic conditions. In this context, we report the synthesis of imines from benzyl alcohols and anilines, promoted by KOt Bu under aerobic conditions at room temperature, in the absence of any transition-metal catalyst. A detailed investigation of the radical mechanism of the underlying reaction is presented. This reveals a complex reaction network fully supporting the experimental findings.

Characterization of selected organometallic compounds by electrospray ionization- and matrix-assisted laser desorption/ionization-mass spectrometry using different types of instruments: Possibilities and limitations.

RATIONALE: Organometallic compounds are becoming increasingly important in their industrial application as catalysts. Mass spectrometry is an essential tool for the structural confirmation of such organometallics. Because the analysis of this class of molecules can be challenging, the ionization behavior and structural confirmation of selected transition metal catalysts are described in this work. METHODS: The transition metal catalysts investigated were analyzed using classical vacuum MALDI reflectron TOF-MS as well as intermediate pressure matrix-assisted laser desorption/ionization quadrupole time-of-flight mass spectrometry (MALDI QTOF-MS). Obtained mass spectra were compared with electrospray ionization MS (ESI-MS) already established for organometallic compounds, utilizing a QTOF mass spectrometer here. In addition, various sample preparations, including two selected MALDI matrices (trans-2-[3-(4-tert-butylphenyl)-2-methyl-2-propenylidene]malononitrile and 2,2':5',2″-terthiophene) with different solvent combinations for MALDI-MS measurements, were investigated in detail with respect to their correct isotope distribution of the molecular ions observed. RESULTS: All investigated organometallic compounds were successfully identified by vacuum and intermediate pressure MALDI-MS. Accurate masses of ions related to molecular ion species (e.g., [M-Cl]+ , [M]+ , and [M + Na]+ ) could be determined by MALDI QTOF-MS measurements with a mass error of less than ±5 ppm for all compounds. Both investigated MALDI matrices performed equally on both instruments. The impact of the analyte/matrix solvent mixtures turned out to be crucial for a successful analysis of the investigated compounds. In contrast, ESI QTOF-MS yielded masses of ions related to molecular ion species in favorable cases. CONCLUSIONS: The use of MALDI-MS for the structural confirmation of organometallic compounds is still not widely used. Nevertheless, this work showed that this analytical technique does have some benefits. The analysis of neutral catalysts proves to be quite useful, concluding that this technique provides a complement and/or an alternative to ESI-MS.

Manganese-Catalyzed Dehydrogenative Silylation of Alkenes Following Two Parallel Inner-Sphere Pathways.

We report on an additive-free Mn(I)-catalyzed dehydrogenative silylation of terminal alkenes. The most active precatalyst is the bench-stable alkyl bisphosphine Mn(I) complex fac-[Mn(dippe)(CO)3(CH2CH2CH3)]. The catalytic process is initiated by migratory insertion of a CO ligand into the Mn-alkyl bond to yield an acyl intermediate which undergoes rapid Si-H bond cleavage of the silane HSiR3 forming the active 16e- Mn(I) silyl catalyst [Mn(dippe)(CO)2(SiR3)] together with liberated butanal. A broad variety of aromatic and aliphatic alkenes was efficiently and selectively converted into E-vinylsilanes and allylsilanes, respectively, at room temperature. Mechanistic insights are provided based on experimental data and DFT calculations revealing that two parallel reaction pathways are operative: an acceptorless reaction pathway involving dihydrogen release and a pathway requiring an alkene as sacrificial hydrogen acceptor.

Synthesis and Characterization of Cobalt NCN Pincer Complexes.

A series of cobalt complexes, stabilized by a monoanionic tridentate NCN pincer ligand, was synthetized and characterized. Preparation of the paramagnetic 15 VE complex [Co(NCNCH2-Et)Br] (1) was accomplished by transmetalation of Li[2,6-(Et2NCH2)2C6H3] with CoBr2 in THF. Treatment of this air-sensitive compound with NO gas resulted in the formation of the diamagnetic Co(III) species [Co(NCNCH2-Et)(NO)Br] (2) as confirmed by X-ray diffraction. This complex features a strongly bent NO ligand (Co-N-O∠135.0°). The νNO is observed at 1609 cm-1 which is typical for a bent metal-N-O arrangement. Coordinatively unsaturated 1 could further be treated with pyridine, isocyanides, phosphines and CO to form five-coordinate 17 VE complexes. Oxidation of 1 with CuBr2 led to the formation of the Co(III) complex [Co(NCNCH2-Et)Br2]. Treatment of [Co(NCNCH2-Et)Br2] with TlBF4 as halide scavenger in acetonitrile led to the formation of the cationic octahedral complex [Co(NCNCH2-Et)(MeCN)3](BF4)2. A combination of X-ray crystallography, IR-, NMR- and EPR-spectroscopy as well as DFT/CAS-SCF calculations were used to characterize all compounds.

Hydroboration of Terminal Alkenes and trans-1,2-Diboration of Terminal Alkynes Catalyzed by a Manganese(I) Alkyl Complex.

A MnI -catalyzed hydroboration of terminal alkenes and a 1,2-diboration of terminal alkynes with pinacolborane (HBPin) is described. For alkenes, anti-Markovnikov hydroboration takes place; for alkynes the reaction proceeds with excellent trans-1,2-selectivity. The most active pre-catalyst is bench-stable alkyl bisphosphine MnI complex fac-[Mn(dippe)(CO)3 (CH2 CH2 CH3 )]. The catalytic process is initiated by migratory insertion of a CO ligand into the Mn-alkyl bond to yield an acyl intermediate, which undergoes B-H bond cleavage of HBPin (for alkenes) and rapid C-H bond cleavage (for alkynes), forming the active MnI boryl and acetylide catalysts [Mn(dippe)(CO)2 (BPin)] and [Mn(dippe)(CO)2 (C≡CR)], respectively. A broad variety of aromatic and aliphatic alkenes and alkynes was efficiently and selectively borylated. Mechanistic insights are provided based on experimental data and DFT calculations revealing that an acceptorless reaction is operating involving dihydrogen release.

Efficient Z-Selective Semihydrogenation of Internal Alkynes Catalyzed by Cationic Iron(II) Hydride Complexes.

The bench-stable cationic bis(σ-B-H) aminoborane complex [Fe(PNPNMe-iPr)(H)(η2-H2B = NMe2)]+ (2) efficiently catalyzes the semihydrogenation of internal alkynes, 1,3-diynes and 1,3-enynes. Moreover, selective incorporation of deuterium was achieved in the case of 1,3-diynes and 1,3-enynes. The catalytic reaction takes place under mild conditions (25 °C, 4-5 bar H2 or D2) in 1 h, and alkenes were obtained with high Z-selectivity for a broad scope of substrates. Mechanistic insight into the catalytic reaction, explaining also the stereo- and chemoselectivity, is provided by means of DFT calculations. Intermediates featuring a bisdihydrogen moiety [Fe(PNPNMe-iPr)(η2-H2)2]+ are found to play a key role. Experimental support for such species was unequivocally provided by the fact that [Fe(PNPNMe-iPr)(H)(η2-H2)2]+ (3) exhibited the same catalytic activity as 2. The novel cationic bisdihydrogen complex 3 was obtained by protonolysis of [Fe(PNPNMe-iPr)(H)(η2-AlH4)]2 (1) with an excess of nonafluoro-tert-butyl alcohol.

Isoelectronic Manganese and Iron Hydrogenation/Dehydrogenation Catalysts: Similarities and Divergences.

Sustainable processes that utilize nontoxic, readily available, and inexpensive starting materials for organic synthesis constitute a major objective in modern chemical research. In this context, it is highly important to perform reactions under catalytic conditions and to replace precious metal catalysts by earth-abundant nonprecious metal catalysts. In particular, iron and manganese are promising candidates, as these are among the most abundant metals in the earth's crust, are inexpensive, and exhibit a low environmental impact. As far as chemical processes are concerned, hydrogenations and acceptorless alcohol dehydrogenation (AAD), sometimes in conjunction with hydrogen autotransfer reactions, are becoming important areas of research. While the first is a very important synthetic process representing a highly atom-efficient and clean methodology, AAD is an oxidant-free, environmentally benign reaction where carbonyl compounds together with dihydrogen as a valuable product and/or reactant (autotransfer) and water are formed. Carbonyl compounds, typically generated in situ, can be converted into other useful organic materials such as amines, imines, or heterocycles. In 2016 several groups, including ours, discovered for the first time the potential of hydride biscarbonyl Mn(I) complexes bearing strongly bound PNP pincer ligands or related tridentate ligands as highly effective and versatile catalysts for hydrogenation, transfer hydrogenation, and dehydrogenation reactions. These complexes are isoelectronic analogues of the respective hydride monocarbonyl Fe(II) PNP compounds and display similar reactivities but also quite divergent behavior depending on the coligands. Moreover, manganese compounds show improved long-term stability and high robustness toward harsh reaction conditions. In light of these recent achievements, this Account contrasts Mn(I) and Fe(II) PNP pincer catalysts, highlighting specific features that are connected to particular structural and electronic properties. It also addresses opportunities and restrictions in their catalytic applications. Apart from classical hydrogenations, it also covers the most recent developments of these catalysts for AAD resulting in the synthesis of complex organic molecules such as heterocycles via multicomponent reactions. The ambivalent hydrogen-based redox chemistry provides access to a variety of synthetically valuable reductive and oxidative coupling reactions. Hence, these catalysts cover a broad scope of catalytic applications and exhibit activities and productivities that are becoming competitive with those of well-established precious metal catalysts. The knowledge about the nature and characteristics of active Mn(I)- and Fe(II)-based systems paves the way for conceptually and mechanistically well-founded research, which might lead to further developments and the discovery of novel catalysts extending the current scope and limitations of reactivity. It underlines that base metal catalysts are beginning to challenge precious metal catalysts and contributes to the further advancement of waste-free sustainable base metal catalysis.

Old Concepts, New Application - Additive-Free Hydrogenation of Nitriles Catalyzed by an Air Stable Alkyl Mn(I) Complex.

An efficient additive-free manganese-catalyzed hydrogenation of nitriles to primary amines with molecular hydrogen is described. The pre-catalyst, a well-defined bench-stable alkyl bisphosphine Mn(I) complex fac-[Mn(dpre)(CO)3(CH3)] (dpre=1,2-bis(di-n-propylphosphino)ethane), undergoes CO migratory insertion into the manganese-alkyl bond to form acyl complexes which upon hydrogenolysis yields the active coordinatively unsaturated Mn(I) hydride catalyst [Mn(dpre)(CO)2(H)]. A range of aromatic and aliphatic nitriles were efficiently and selectively converted into primary amines in good to excellent yields. The hydrogenation of nitriles proceeds at 100 °C with a catalyst loading of 2 mol % and a hydrogen pressure of 50 bar. Mechanistic insights are provided by means of DFT calculations.

Five-Coordinate Low-Spin {FeNO}7 PNP Pincer Complexes.

The synthesis and characterization of air-stable cationic mono nitrosonium Fe(I) PNP pincer complexes of the type [Fe(PNP)(NO)Cl]+ are described. These complexes are obtained via direct nitroslyation of [Fe(PNP)Cl2] with nitric oxide at ambient pressure. On the basis of magnetic and EPR measurements as well as DFT calculations, these compounds were found to adopt a low-spin d7 configuration and feature a nearly linear bound NO ligand suggesting FeINO+ rather than FeIINO• character. X-ray structures of all nitrosonium Fe(I) PNP complexes are presented. Preliminary investigations reveal that [Fe(PNPNH- iPr)(NO)(Cl)]+ efficiently catalyzes the conversion of primary alcohols and aromatic and benzylic amines to yield mono N-alkylated amines in good isolated yields.

Influence of the Ionic Liquid on the Activity of a Supported Ionic Liquid Phase FeII Pincer Catalyst for the Hydrogenation of Aldehydes.

The catalytic hydrogenation of different aldehydes to the corresponding alcohols was investigated using an FeII hydride pincer complex as catalyst in the supported ionic liquid phase (SILP) reaction mode. Two different ionic liquids of the type [X4441][NTf2] with X=N or P were applied with mesoporous silica gel as support, which was coated first with a chemisorbed monolayer of the corresponding modified IL to remove acidic surface OH-groups and to prevent IL leaching. Quantitative conversion with turn-over frequencies in the order of 1000 h- 1 were obtained for various aromatic and heteroaromatic aldehydes and highly selective aldehyde reduction was observed also for substrates containing reducible C=C bonds. Aldehydes with longer aliphatic chains or cycloalkyl substituents, however, showed no conversion here, in contrast to a previous study with an imidazolium-based ionic liquid. These differences were ascribed primarily to differences in substrate/ionic liquid interactions. Whereas [N4441][NTf2] and [P4441][NTf2] gave essentially identical results for different substrates in single-batch reactions, prolonged use of the catalyst in repeated reaction cycles lead to a quick drop-off in catalyst activity in [P4441][NTf2], but a continuous, quantitative conversion in [N4441][NTf2].

Access to FeII Bis(σ-B-H) Aminoborane Complexes through Protonation of a Borohydride Complex and Dehydrogenation of Amine-Boranes.

Herein, we report on the first synthesis and structural characterization of the iron based aminoborane complexes [Fe(PNP)(H)(η2 :η2 -H2 B=NR2 )]+ (R=H, Me). These species are formed upon protonation of the borohydride complex [Fe(PNP)(H)(η2 -BH4 )] by ammonium salts [NH2 R2 ]+ (R=H, Me). For R=Me, the reaction proceeds via the cationic dinuclear intermediate [{Fe(PNP)(H)}2 (µ2 ,η2 :η2 -BH4 )]+ . A mechanism for the reaction is proposed based on DFT calculations that also indicate the final aminoborane complex as the thermodynamic product. All complexes were characterized by NMR spectroscopy, HRMS, and X-ray crystallography.

Iron PCP Pincer Complexes in Three Oxidation States: Reversible Ligand Protonation To Afford an Fe(0) Complex with an Agostic C-H Arene Bond.

In the current investigation, the reaction of Fe2(CO)9 with the ligand precursor 2-chloro-N1,N3-bis(diisopropylphosphanyl)-N1,N3-diethylbenzene-1,3-diamine (P(C-Cl)PNEt- iPr) (1) was investigated. When a suspension of Fe2(CO)9 and 1 in CH3CN was transferred in a sealed microwave glass vial and stirred for 18 h at 110 °C the complex [Fe(PCPNEt- iPr)(CO)2Cl] (2) was obtained. In an attempt to prepare the hydride Fe(II) complex [Fe(PCPNEt- iPr)(CO)2H] (3), 2 was reacted with 1 equiv of Li[HBEt3] in THF. Instead of ligand substitution, this complex underwent a one electron reduction which led to the formation of the low-spin d7 Fe(I) complex [Fe(PCPNEt- iPr)(CO)2] (4). Exposure of a benzene solution of 4 to NO gas (1 bar) at room temperature affords the diamagnetic complex [Fe(PCPNEt- iPr)(CO)(NO)] (5). This is the first iron PCP nitrosyl complex. Protonation of 5 with HBF4·Et2O affords the cationic Fe(0) complex [Fe(κ3 P,CH,P-P(CH)PNEt- iPr)(CO)(NO)]BF4 (6) which features an η2-Caryl-H agostic bond. Even with relatively weak bases such as NEt3 the agostic C-H bond can be deprotonated with reformation of the starting material 5. Therefore, protonation of 5 is completely reversible.

Thiopyridazine-Based Palladium and Platinum Boratrane Complexes.

Palladium and platinum boratrane complexes of the type [M{B(PnMe, tBu)3}(PPh3)] (M = Pd 1, Pt 2b) have been prepared via the reaction of the soft scorpionate ligand potassium tris(4-methyl-6- tert-butyl-3-thiopyridazinyl)borate KTnMe, tBu with bis(triphenylphosphine)metal(II) dichloride. While reaction with the Pd precursor allowed direct isolation of a symmetric boratrane complex, the Pt analogue led to the hydrido compound [Pt{B(PnMe, tBu)3}(PPh3)H]Cl (2a), which after reaction with a base gave 2b. Subsequent oxidation with Br2 and I2, respectively, led to the dihalide compounds of the molecular formula [M{B(PnMe, tBu)3}X2] (3a,b-4a,b). Halide abstraction with Ag(SbF6) further gave interesting cationic compounds of either dimeric [Pd{B(PnMe, tBu)3}X]2(SbF6)2 (5a,b) or monomeric [Pd{B(PnMe, tBu)3}(NCMe)2](SbF6) (6) nature. All compounds were spectroscopically and X-ray crystallographically characterized revealing strong metal to boron interactions. DFT calculations of 1, 2a, and 2b confirm the strong M-B interaction and a high positive charge on the metal centers.

Formation of Mono Oxo Molybdenum(IV) PNP Pincer Complexes: Interplay between Water and Molecular Oxygen.

The synthesis of cationic mono oxo MoIV PNP pincer complexes of the type [Mo(PNPMe-iPr)(O)X]+ (X = I, Br) from [Mo(PNPMe-iPr)(CO)X2] is described. These compounds are coordinatively unsaturated and feature a strong Mo≡O triple bond. The formation of these complexes proceeds via cationic 14e intermediates [Mo(PNPMe-iPr)(CO)X]+ and requires both molecular oxygen and water. ESI MS measurements with 18O labeled water (H2 18O) and molecular oxygen (18O2) indicates that water plays a crucial role in the formation of the Mo≡O bond. A plausible mechanism based on DFT calculations is provided. The X-ray structure of [Mo(PNPMe-iPr)(O)I]SbF6 is presented.

Manganese-Catalyzed Aminomethylation of Aromatic Compounds with Methanol as a Sustainable C1 Building Block.

This study represents the first example of a manganese-catalyzed environmentally benign, practical three-component aminomethylation of activated aromatic compounds including naphtols, phenols, pyridines, indoles, carbazoles, and thiophenes in combination with amines and MeOH as a C1 source. These reactions proceed with high atom efficiency via a sequence of dehydrogenation and condensation steps which give rise to selective C-C and C-N bond formations, thereby releasing hydrogen and water. A well-defined hydride Mn(I) PNP pincer complex, recently developed in our laboratory, catalyzes this process in a very efficient way, and a total of 28 different aminomethylated products were synthesized and isolated yields of up to 91%. In a preliminary study, a related Fe(II) PNP pincer complex was shown to catalyze the methylation of 2-naphtol rather than its aminomethylation displaying again the divergent behavior of isoelectronic Mn(I) and Fe(II) PNP pincer systems.

Stable, Yet Highly Reactive Nonclassical Iron(II) Polyhydride Pincer Complexes: Z-Selective Dimerization and Hydroboration of Terminal Alkynes.

The synthesis, characterization, and catalytic activity of nonclassical iron(II) polyhydride complexes containing tridentate PNP pincer-type ligands is described. These compounds of the general formula [Fe(PNP)(H)2(η2-H2)] exhibit remarkable reactivity toward terminal alkynes. They efficiently promote the catalytic dimerization of aryl acetylenes giving the corresponding conjugated 1,3-enynes in excellent yields with low catalyst loadings. When the reaction is carried out in the presence of pinacolborane, vinyl boronates are obtained. Both reactions take place under mild conditions and are highly chemo-, regio-, and stereoselective with up to 99% Z-selectivity.

Activation of Molecular Oxygen by a Molybdenum(IV) Imido Compound.

Activation of molecular dioxygen at a molybdenum(IV) imido compound led to the isolation and full characterization of a remarkably stable transition-metal imidoperoxido complex.