Synthesizing Highly Regular Single-Layer Alkynyl-Silver Networks at the Micrometer Scale via Gas-Mediated Surface Reaction.

Extended organometallic honeycomb alkynyl-silver networks have been synthesized on a noble metal surface under ultrahigh vacuum conditions via a gas-mediated surface reaction protocol. Specifically, the controlled exposure to molecular oxygen efficiently deprotonates terminal alkyne moieties of 1,3,5-tris(4-ethynylphenyl)benzene (Ext-TEB) precursors adsorbed on Ag(111). At Tsub = 200 K, this O2-mediated reaction pathway features high chemoselectivity without poisoning the surface. Through mild annealing to 375 K, long-range ordered alkynyl-silver networks incorporating substrate atoms evolve, featuring Ag- bis-acetylide motifs, high structural quality and a regular arrangement of nanopores with a van der Waals cavity of ≈8.3 nm2.

On-Surface Activation of Trimethylsilyl-Terminated Alkynes on Coinage Metal Surfaces.

The controlled attachment of protecting groups combined with the ability to selectively abstract them is central to organic synthesis. The trimethylsilyl (TMS) functional group is a popular protecting group in solution. However, insights on its activation behavior under ultra-high vacuum (UHV) and surface-confined conditions are scarce. Here we investigate a series of TMS-protected alkyne precursors via scanning tunneling microscopy (STM) regarding their compatibility with organic molecular beam epitaxy (OMBE) and their potential deprotection on various coinage metal surfaces. After in-situ evaporation on the substrates held in UHV at room temperature, we find that all molecules arrived and adsorbed as intact units forming ordered supramolecular aggregates stabilized by non-covalent interactions. Thus, TMS-functionalized alkyne precursors with weights up to 1100 atomic mass units are stable against OMBE evaporation in UHV. Furthermore, the TMS activation through thermal annealing is investigated with STM and X-ray photoelectron spectroscopy (XPS). We observe that deprotection starts to occur between 400 K and 500 K on the copper and gold surfaces, respectively. In contrast, on silver surfaces, the TMS-alkyne bond remains stable up to temperatures where molecular desorption sets in (≈600 K). Hence, TMS functional groups can be utilized as leaving groups on copper and gold surfaces while they serve as protecting groups on silver surfaces.

Surface-Dependent Chemoselectivity in C-C Coupling Reactions.

Surface-confined covalent coupling reactions of the linear compound 4-(but-3-en-1-ynyl)-4'-ethynyl-1,1'-biphenyl (1), which contains one alkyne and one enyne group on opposing ends, have been investigated using scanning tunneling microscopy (STM) and density functional theory (DFT) calculations. The reactions show a surface-dependent chemoselectivity: on Au(111), compound 1 preferentially yields cyclotrimerization products, while on Cu(111), a selective coupling between the enyne and alkyne groups is observed. Linear, V-shaped string formations combined with Y-shaped bifurcation motifs result in a random reticulation on the entire surface. DFT calculations show that the C-H⋅⋅⋅πδ- transition state of the reaction between the deprotonated alkyne group and a nearby H-donor of the alkene group plays a key role in the mechanism and high chemoselectivity. This study highlights a concept that opens new avenues to the surface-confined synthesis of covalent carbon-based sp-sp2 polymers.

Quantum Tunneling Mediated Interfacial Synthesis of a Benzofuran Derivative.

Reaction pathways involving quantum tunneling of protons are fundamental to chemistry and biology. They are responsible for essential aspects of interstellar synthesis, the degradation and isomerization of compounds, enzymatic activity, and protein dynamics. On-surface conditions have been demonstrated to open alternative routes for organic synthesis, often with intricate transformations not accessible in solution. Here, we investigate a hydroalkoxylation reaction of a molecular species adsorbed on a Ag(111) surface by scanning tunneling microscopy complemented by X-ray electron spectroscopy and density functional theory. The closure of the furan ring proceeds at low temperature (down to 150 K) and without detectable side reactions. We unravel a proton-tunneling-mediated pathway theoretically and confirm experimentally its dominant contribution through the kinetic isotope effect with the deuterated derivative.

Functionalized Graphdiyne Nanowires: On-Surface Synthesis and Assessment of Band Structure, Flexibility, and Information Storage Potential.

Carbon nanomaterials exhibit extraordinary mechanical and electronic properties desirable for future technologies. Beyond the popular sp2 -scaffolds, there is growing interest in their graphdiyne-related counterparts incorporating both sp2 and sp bonding in a regular scheme. Herein, we introduce carbonitrile-functionalized graphdiyne nanowires, as a novel conjugated, one-dimensional (1D) carbon nanomaterial systematically combining the virtues of covalent coupling and supramolecular concepts that are fabricated by on-surface synthesis. Specifically, a terphenylene backbone is extended with reactive terminal alkyne and polar carbonitrile (CN) moieties providing the required functionalities. It is demonstrated that the CN functionalization enables highly selective alkyne homocoupling forming polymer strands and gives rise to mutual lateral attraction entailing room-temperature stable double-stranded assemblies. By exploiting the templating effect of the vicinal Ag(455) surface, 40 nm long semiconducting nanowires are obtained and the first experimental assessment of their electronic band structure is achieved by angle-resolved photoemission spectroscopy indicating an effective mass below 0.1m0 for the top of the highest occupied band. Via molecular manipulation it is showcased that the novel oligomer exhibits extreme mechanical flexibility and opens unexplored ways of information encoding in clearly distinguishable CN-phenyl trans-cis species. Thus, conformational data storage with density of 0.36 bit nm-2 and temperature stability beyond 150 K comes in reach.

Ho-Mediated Alkyne Reactions at Low Temperatures on Ag(111).

Low-temperature approaches to catalytic conversions promise efficiency, selectivity, and sustainable processes. Control over certain coupling reactions can be obtained via the pre-positioning of reactive moieties by self-assembly. However, in the striving field of on-surface synthesis atomistic precision and control remains largely elusive, because the employed coupling reactions proceed at temperatures beyond the thermal stability of the supramolecular templates. Here, utilizing scanning tunneling microscopy, we demonstrate terminal alkyne on-surface reactions mediated by Ho atoms at a weakly reactive Ag(111) substrate at low-temperatures. Density functional theory calculations confirm the catalytic activity of the involved adatoms. Pre-deposited Ho induces alkyne dehydrogenation starting at substrate temperatures as low as 100 K. Ho arriving at molecularly pre-covered surfaces held at 130 and 200 K produces covalent enyne-linked dimers and initiates cyclotrimerization, respectively. Statistical product analysis indicates a two-step pathway for the latter, whereby the enyne intermediates influence the distribution of the products. High chemoselectivity results from the absence of cyclotetramerization and diyne-forming homocoupling. Our analysis indicates that mainly the arriving Ho adatoms enable the coupling. These findings support the concept of dynamic heterogeneity by single-atom catalysts and pave the way for alternative means to control on-surface reactions.

Terminal Alkyne Coupling on a Corrugated Noble Metal Surface: From Controlled Precursor Alignment to Selective Reactions.

Surface-templated covalent coupling of organic precursors currently emerges as a promising route to the atom-precise fabrication of low-dimensional carbon materials. Here, we investigate the adsorption and the coupling reactions of 4,4''-diethynyl-1,1':4',1''-terphenyl on Au(110) under ultra-high vacuum conditions by using scanning tunneling microscopy combined with density functional theory and kinetic Monte Carlo calculations. Temperature treatment induces both 1,2,4-asymmetric cyclotrimerization and homocoupling, resulting in various reaction products, including a previously unreported, surface-templated H-shaped pentamer. Our analysis of the temperature-dependent relative product abundances unravels that 1,2,4-trimerization and homocoupling proceed via identical intermediate species with the final products depending on the competition of coupling to a third monomer versus dehydrogenation. Our study sheds light on the control of coupling reactions by corrugated surfaces and annealing protocols.

In vacuo interfacial tetrapyrrole metallation.

The metallation of tetrapyrroles at well-defined surfaces under ultra-high vacuum conditions represents an unconventional synthesis approach to achieve tetrapyrrole-based metal-organic complexes and architectures. Different protocols, pioneered over the last decade, and now widely applied in several fields, provide an elegant route to metallo-tetrapyrrole systems often elusive to conventional procedures and give access and exquisite insight into on-surface tetrapyrrole chemistry. As highlighted by the functionality of metallo-porphyrins in biological or other environments and by the eminent role of metallo-phthalocyanines in synthetic materials, the control on the metal centres incorporated into the macrocycle is of utmost importance to achieve tailored properties in tetrapyrrole-based nanosystems. In the on-surface scenario, precise metallation pathways were developed, including reactions of tetrapyrroles with metals supplied by physical vapour deposition, chemical vapour deposition or the tip of a scanning tunnelling microscope, and self-metallation by atoms of an underlying support. Herein, we provide a comprehensive overview of in vacuo tetrapyrrole metallation, addressing two-dimensional as well as three-dimensional systems. Furthermore, we comparatively assess the available library of on-surface metallation protocols and elaborate on the state-of-the-art methodology.

Intermolecular Hybridization Creating Nanopore Orbital in a Supramolecular Hydrocarbon Sheet.

Molecular orbital engineering is a key ingredient for the design of organic devices. Intermolecular hybridization promises efficient charge carrier transport but usually requires dense packing for significant wave function overlap. Here we use scanning tunneling spectroscopy to spatially resolve the electronic structure of a surface-confined nanoporous supramolecular sheet of a prototypical hydrocarbon compound featuring terminal alkyne (-CCH) groups. Surprisingly, localized nanopore orbitals are observed, with their electron density centered in the cavities surrounded by the functional moieties. Density functional theory calculations reveal that these new electronic states originate from the intermolecular hybridization of six in-plane π-orbitals of the carbon-carbon triple bonds, exhibiting significant electronic splitting and an energy downshift of approximately 1 eV. Importantly, these nanopore states are distinct from previously reported interfacial states. We unravel the underlying connection between the formation of nanopore orbital and geometric arrangements of functional groups, thus demonstrating the generality of applying related orbital engineering concepts in various types of porous organic structures.

Dynamics of Spatially Confined Bisphenol A Trimers in a Unimolecular Network on Ag(111).

Bisphenol A (BPA) aggregates on Ag(111) shows a polymorphism between two supramolecular motifs leading to formation of distinct networks depending on thermal energy. With rising temperature a dimeric pairing scheme reversibly converts into a trimeric motif, which forms a hexagonal superstructure with complex dynamic characteristics. The trimeric arrangements notably organize spontaneously into a self-assembled one-component array with supramolecular BPA rotors embedded in a two-dimensional stator sublattice. By varying the temperature, the speed of the rotors can be controlled as monitored by direct visualization. A combination of scanning tunneling microscopy and dispersion-corrected density-functional tight-binding (DFTB-vdW(surf)) based molecular modeling reveals the exact atomistic position of each molecule within the assembly as well as the driving force for the formation of the supramolecular rotors.

One-Dimensionally Disordered Chiral Sorting by Racemic Tiling in a Surface-Confined Supramolecular Assembly of Achiral Tectons.

The aggregation of (pro)chiral/achiral molecules into crystalline structures at interfaces forms conglomerates, racemates, and solid solutions, comparable to known bulk phases. Scanning tunneling microscopy and Monte Carlo simulations were employed to uncover a distinct racemic phase, expressing 1D disordered chiral sorting through random tiling in surface-confined supramolecularly assembled achiral 4,4''-diethynyl-1,1':4',1''-terphenyl molecules. The configurational entropy of the 1D disordered racemic tiling phase was verified by analytical modeling, and found to lie between that of a perfectly ordered 2D racemate and a racemic solid solution.

Synthesis of Graphene Nanoribbons by Ambient-Pressure Chemical Vapor Deposition and Device Integration.

Graphene nanoribbons (GNRs), quasi-one-dimensional graphene strips, have shown great potential for nanoscale electronics, optoelectronics, and photonics. Atomically precise GNRs can be "bottom-up" synthesized by surface-assisted assembly of molecular building blocks under ultra-high-vacuum conditions. However, large-scale and efficient synthesis of such GNRs at low cost remains a significant challenge. Here we report an efficient "bottom-up" chemical vapor deposition (CVD) process for inexpensive and high-throughput growth of structurally defined GNRs with varying structures under ambient-pressure conditions. The high quality of our CVD-grown GNRs is validated by a combination of different spectroscopic and microscopic characterizations. Facile, large-area transfer of GNRs onto insulating substrates and subsequent device fabrication demonstrate their promising potential as semiconducting materials, exhibiting high current on/off ratios up to 6000 in field-effect transistor devices. This value is 3 orders of magnitude higher than values reported so far for other thin-film transistors of structurally defined GNRs. Notably, on-surface mass spectrometry analyses of polymer precursors provide unprecedented evidence for the chemical structures of the resulting GNRs, especially the heteroatom doping and heterojunctions. These results pave the way toward the scalable and controllable growth of GNRs for future applications.

On-surface synthesis of carbon-based scaffolds and nanomaterials using terminal alkynes.

The covalent linking of acetylene compounds is an important synthetic tool to control carbon-carbon bond formation and has been extensively studied for more than a century. Notably, Glaser coupling and subsequently developed refined procedures present an important route for the fabrication of distinct carbon-based scaffolds incorporating units with both sp(2)- and sp-hybridizations, such as carbyne chains, or two-dimensional (2D) graphyne or graphdiyne networks. However, the realization of the envisioned regular low-dimensional compounds and nanoarchitectures poses formidable challenges when following conventional synthesis protocols in solution, which we briefly overview. Now, recent developments in on-surface synthesis establish novel means for the construction of tailored covalent nanostructures under ultrahigh vacuum conditions. Here we focus on the exploration of pathways utilizing interfacial synthesis with terminal alkynes toward the atomically precise fabrication of low-dimensional carbon-rich scaffolds and nanomaterials. We review direct, molecular-level investigations, mainly relying on scanning probe microscopy, providing atomistic insights into thermally activated reaction schemes, their special pathways and products. Using custom-made molecular units, the employed homocoupling, cyclotrimerization, cycloaddition, and radical cyclization processes indeed yield distinct compounds, extended oligomers or 2D networks. Detailed insights into surface interactions such as bonding sites or conformational adaptation, and specific reaction mechanisms, including hierarchic pathways, were gained by sophisticated density functional theory calculations, complemented by X-ray spectroscopy measurements. For the fabrication of regular nanostructures and architectures, it is moreover imperative to cope with spurious side reactions, frequently resulting in chemical diversity. Accordingly, we highlight measures for increasing chemo- and regioselectivity by smart precursor design, substrate templating, and external stimuli. The ensuing preorganization of functional groups and control of side reactions increases product yields markedly. Finally, the electronic band structures of selected cases of novel low-dimensional hydrocarbon materials accessible with the monomers employed to date are discussed with a specific focus on their differences to theoretically established graphyne- and graphdiyne-related scaffolds. The presented methodology and gained insights herald further advancements in the field, heading toward novel molecular compounds, low-dimensional nanostructures, and coherently reticulated polymeric layers, eventually presenting well-defined arrangements with specific carbon-carbon bond sequencing and electronic characteristics. The functional properties of these or other foreseeable scaffolds and architectures bear significant prospects for a wide range of applications, for example, in nanoelectronics, photonics, or carbon-based technologies.

Surface-Guided Formation of an Organocobalt Complex.

Organocobalt complexes represent a versatile tool in organic synthesis as they are important intermediates in Pauson-Khand, Friedel-Crafts, and Nicholas reactions. Herein, a single-molecule-level investigation addressing the formation of an organocobalt complex at a solid-vacuum interface is reported. Deposition of 4,4'-(ethyne-1,2-diyl)dibenzonitrile and Co atoms on the Ag(111) surface followed by annealing resulted in genuine complexes in which single Co atoms laterally coordinated to two carbonitrile groups undergo organometallic bonding with the internal alkyne moiety of adjacent molecules. Alternative complexation scenarios involving fragmentation of the precursor were ruled out by complementary X-ray photoelectron spectroscopy. According to density functional theory analysis, the complexation with the alkyne moiety follows the Dewar-Chatt-Duncanson model for a two-electron-donor ligand where an alkyne-to-Co donation occurs together with a strong metal-to-alkyne back-donation.

A Bifunctional Electrocatalyst for Oxygen Evolution and Oxygen Reduction Reactions in Water.

Oxygen reduction and water oxidation are two key processes in fuel cell applications. The oxidation of water to dioxygen is a 4 H(+)/4 e(-) process, while oxygen can be fully reduced to water by a 4 e(-)/4 H(+) process or partially reduced by fewer electrons to reactive oxygen species such as H2O2 and O2(-). We demonstrate that a novel manganese corrole complex behaves as a bifunctional catalyst for both the electrocatalytic generation of dioxygen as well as the reduction of dioxygen in aqueous media. Furthermore, our combined kinetic, spectroscopic, and electrochemical study of manganese corroles adsorbed on different electrode materials (down to a submolecular level) reveals mechanistic details of the oxygen evolution and reduction processes.

Polyphenylsilole multilayers--an insight from X-ray electron spectroscopy and density functional theory.

We present a combined investigation by means of X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine-structure (NEXAFS) spectroscopy of condensed multilayers of two polyphenylsiloles, namely hexaphenylsilole (HPS) and tetraphenylsilole (TPS). Both compounds exhibit very similar spectroscopic signatures, whose interpretation is aided by density functional theory (DFT) calculations. High-resolution XPS spectra of the Si 2p and C 1s core levels of these multilayers indicate a positively charged silicon ion flanked by two negatively charged adjacent carbon atoms in the silole core of both molecules. This result is corroborated quantitatively by DFT calculations on isolated HPS (TPS) molecules, which show a natural bond orbital partial charge of +1.67 e (+1.58 e) on the silicon and -0.34 e (-0.58 e) on the two neighbouring carbon atoms in the silole ring. These charges are conserved in direct contact with a Cu(111) substrate for films of submonolayer coverage, as evidenced by the Si 2p XPS data. The C K-edge NEXAFS spectra of HPS and TPS multilayers exhibit distinct and differing features. Their main characteristics reappear in the simulated spectra and are assigned to the different inequivalent carbon species in the molecule. The angle-dependent measurements hardly reveal any dichroism, i.e., the molecular π-systems are not uniformly oriented parallel or perpendicular with respect to the surface. Changes in the growth conditions of TPS, i.e., a reduction of the substrate temperature from 240 K to 80 K during deposition, lead to a broadening of both XPS and NEXAFS signatures, as well as an upward shift of the Si 2p and C 1s binding energies, indicative of a less ordered growth mode at low temperature.

Synthesis of extended graphdiyne wires by vicinal surface templating.

Surface-assisted covalent synthesis currently evolves into an important approach for the fabrication of functional nanostructures at interfaces. Here, we employ scanning tunneling microscopy to investigate the homocoupling reaction of linear, terminal alkyne-functionalized polyphenylene building-blocks on noble metal surfaces under ultrahigh vacuum. On the flat Ag(111) surface, thermal activation triggers a variety of side-reactions resulting in irregularly branched polymeric networks. Upon alignment along the step-edges of the Ag(877) vicinal surface drastically improves the chemoselectivity of the linking process permitting the controlled synthesis of extended-graphdiyne wires with lengths reaching 30 nm. The ideal hydrocarbon scaffold is characterized by density functional theory as a 1D, direct band gap semiconductor material with both HOMO and LUMO-derived bands promisingly isolated within the electronic structure. The templating approach should be applicable to related organic precursors and different reaction schemes thus bears general promise for the engineering of novel low-dimensional carbon-based materials.

Topological dynamics in supramolecular rotors.

Artificial molecular switches, rotors, and machines are set to establish design rules and applications beyond their biological counterparts. Herein we exemplify the role of noncovalent interactions and transient rearrangements in the complex behavior of supramolecular rotors caged in a 2D metal-organic coordination network. Combined scanning tunneling microscopy experiments and molecular dynamics modeling of a supramolecular rotor with respective rotation rates matching with 0.2 kcal mol(-1) (9 meV) precision, identify key steps in collective rotation events and reconfigurations. We notably reveal that stereoisomerization of the chiral trimeric units entails topological isomerization whereas rotation occurs in a topology conserving, two-step asynchronous process. In supramolecular constructs, distinct displacements of subunits occur inducing a markedly lower rotation barrier as compared to synchronous mechanisms of rigid rotors. Moreover, the chemical environment can be instructed to control the system dynamics. Our observations allow for a definition of mechanical cooperativity based on a significant reduction of free energy barriers in supramolecules compared to rigid molecules.

Surface-assisted dehydrogenative homocoupling of porphine molecules.

The templated synthesis of porphyrin dimers, oligomers, and tapes has recently attracted considerable interest. Here, we introduce a clean, temperature-induced covalent dehydrogenative coupling mechanism between unsubstituted free-base porphine units yielding dimers, trimers, and larger oligomers directly on a Ag(111) support under ultrahigh-vacuum conditions. Our multitechnique approach, including scanning tunneling microscopy, near-edge X-ray absorption fine structure and photoelectron spectroscopy complemented by theoretical modeling, allows a comprehensive characterization of the resulting nanostructures and sheds light on the coupling mechanism. We identify distinct coupling motifs and report a decrease of the electronic gap and a modification of the frontier orbitals directly associated with the formation of triply fused dimeric species. This new on-surface homocoupling protocol yields covalent porphyrin nanostructures addressable with submolecular resolution and provides prospective model systems towards the exploration of extended oligomers with tailored chemical and physical properties.

Photoinduced C-C reactions on insulators toward photolithography of graphene nanoarchitectures.

On-surface chemistry for atomically precise sp(2) macromolecules requires top-down lithographic methods on insulating surfaces in order to pattern the long-range complex architectures needed by the semiconductor industry. Here, we fabricate sp(2)-carbon nanometer-thin films on insulators and under ultrahigh vacuum (UHV) conditions from photocoupled brominated precursors. We reveal that covalent coupling is initiated by C-Br bond cleavage through photon energies exceeding 4.4 eV, as monitored by laser desorption ionization (LDI) mass spectrometry (MS) and X-ray photoelectron spectroscopy (XPS). Density functional theory (DFT) gives insight into the mechanisms of C-Br scission and C-C coupling processes. Further, unreacted material can be sublimed and the coupled sp(2)-carbon precursors can be graphitized by e-beam treatment at 500 °C, demonstrating promising applications in photolithography of graphene nanoarchitectures. Our results present UV-induced reactions on insulators for the formation of all sp(2)-carbon architectures, thereby converging top-down lithography and bottom-up on-surface chemistry into technology.