Consumption of Wine with Meals and Subjective Well-being: A Finnish Population-Based Study.

AIMS: To examine in the general population the association of regular consumption of wine with meals, subjective well-being and risky drinking. METHODS: A random sample of Finnish people aged 18-69 ('Finnish Drinking Habits Survey 2008', n = 2591, response rate 74%) were interviewed regarding psychological distress, self-efficacy, self-perceived health, uncontrolled drinking, negative events during drinking, hazardous drinking and consumption of alcohol. The analysis focused on comparison of those who drank wine at least once a week versus more seldom. Regression models adjusted for social determinants, smoking and chronic illness. RESULTS: Twelve percent of Finnish adults drank wine with meals at least once a week. Drinking wine with meals was an urban phenomenon and associated with higher socioeconomic status. Regular wine with meal drinkers reported better health, higher self-efficacy and less psychological distress than others even when various confounders were adjusted for. They also reported more risky drinking and higher yearly consumption than other alcohol consumers. Especially those who drank both wine and beer during meals had higher rates of risky drinking. Those restricting themselves to only wine with meals reported less hazardous drinking than the general population. CONCLUSION: Consumption of wine with meals was associated with high socioeconomic status and high subjective well-being. Risky drinking was prevalent among wine with meal drinkers, but only among those who drank both wine and beer with meals. Potential unknown confounders may exist, but the results underline a link between subjective well-being and drinking wine with meals.

Osteoclastogenesis is influenced by modulation of gap junctional communication with antiarrhythmic peptides.

Osteoclasts are formed by the fusion of mononuclear precursor cells of the monocyte-macrophage lineage. Among several putative mechanisms, gap-junctional intercellular communication (GJC) has been proposed to have a role in osteoclast fusion and bone resorption. We examined the role of GJC in osteoclastogenesis and in vitro bone resorption with mouse bone marrow hematopoietic stem cells and RAW 264.7 cells. Blocking of gap junctions with 18-α-glycyrrhetinic acid (18GA) led to inhibition of osteoclastogenesis and in vitro bone resorption. Similarly, the GJC inhibitor GAP27 inhibited osteoclast formation. GJC modulation with the antiarrhythmic peptides (AAPs) led to increased amounts of multinuclear RAW 264.7 osteoclasts as well as increased number of nuclei per multinuclear cell. In the culture of bone marrow hematopoietic stem cells in the presence of bone marrow stromal cells AAP reduced the number of osteoclasts, and coculture of MC3T3-E1 preosteoblasts with RAW 264.7 macrophages prevented the action of AAPs to promote osteoclastogenesis. The present data indicate that AAPs modulate the fusion of the pure culture of cells of the monocyte-macrophage lineage. However, the fusion is influenced by GJC in cells of the osteoblast lineage.

Screening and outcome of chromosomal abnormalities other than trisomy 21 in Northern Finland.

OBJECTIVE: To examine the performance of first-trimester combined screening after adding the specific algorithms for trisomies 18 and 13 in the Down syndrome screening program for chromosomal abnormalities other than trisomy 21 and to determine the outcomes of such pregnancies. DESIGN: A retrospective study. SETTING: Oulu University Hospital, Finland. POPULATION: Pregnant women (n=56 076) participating voluntarily in first-trimester combined Down syndrome screening in Northern and Eastern Finland during the study period 1 June 2002 to 31 December 2008. METHODS: The data of all known cases of chromosomal abnormalities other than trisomy 21 were collected. MAIN OUTCOME MEASURES: Risk algorithms for trisomies 21, 18 and 13 were used for the calculation of patient-specific risks for certain chromosomal abnormalities. Algorithms were based on maternal age, crown-rump length, nuchal translucency, and measurement of free ß-human chorionic gonadotrophin and pregnancy-associated plasma protein-A. Detection rates and false-positive rates were calculated. RESULTS: A total of 27 cases of trisomy 18, 11 cases of trisomy 13 and 30 cases of other chromosomal abnormalities were analyzed. The algorithm for Down syndrome detected 55.6% of trisomy 18 cases, 36.4% of trisomy 13 cases and 60.0% of other chromosomal abnormalities. When specific risk algorithms were added, the detection rates improved for trisomy 18 (74.0%) and for trisomy 13 (54.5%), with only a slight increase of the false-positive rate of 0.2%. The detection rate for other chromosomal abnormalities did not improve. CONCLUSIONS: Adding the trisomy 18 algorithm to the Down screening program resulted in the detection of five additional trisomy 18 cases.

Osteoclasts in the interface with electrospun hydroxyapatite.

Electrospinning is a method to produce lightweight, resorbable and bioinspired scaffolds for tissue engineering. Here we investigated the influence of electrospun hydroxyapatite fibers (HA) on macrophages and osteoclasts. A mouse macrophage cell line (RAW 264.7) and human bone marrow derived primary osteoclasts (hOC) were cultured with electrospun HA fibers embedded in Matrigel. Cell morphology and the secretion of pro-inflammatory cytokines (IL-6 and TNF-α) were analyzed using macrophages. Both fluorescent microscopy and scanning electron microscopy indicated that the cell morphology differed on the various materials (HA fibers on Matrigel, pure Matrigel and a glass control). Control macrophages were activated with bacterial lipopolysaccharide (LPS) but electrospun HA did not provoke an inflammatory response. Cytokine secretion detected with enzyme-linked immunosorbent assay (ELISA) also supported this observation. LPS, but not HA fibers, stimulated TNF-α and IL-6 secretion by macrophages at the 2 day time point. After 4 days in culture there was an increasing trend in cytokine secretion in the HA fiber samples. Human bone marrow myeloid precursor cells were able to fuse and differentiate on the fibrous mineral scaffold to form functional multinuclear osteoclasts that were able to resorb the HA nanofibers. This indicates that osteoclasts do not necessarily need a continuous bone surface but osteoclast ruffled border membranes can form a resorption interface with a fibrous mineral scaffold.

Preparation and bioactive properties of nanocrystalline hydroxyapatite thin films obtained by conversion of atomic layer deposited calcium carbonate.

Nanocrystalline hydroxyapatite thin films were fabricated on silicon and titanium by atomic layer deposition (ALD) of CaCO3 and its subsequent conversion to hydroxyapatite by diammonium hydrogen phosphate (DAP) solution. The effects of conversion process parameters to crystallinity and morphology of the films were examined. DAP concentration was found to be critical in controlling the crystal size and homogeneity of the films. The hydroxyapatite phase was identified by XRD. ToF-elastic recoil detection analysis studies revealed that the films are calcium deficient in relation to hydroxyapatite with a Ca/P ratio of 1.39 for films converted with 0.2 M DAP at 95 °C. The coatings prepared on titanium conformally follow the rough surface topography of the substrate, verifying that the good step coverage of the ALD method was maintained in the conversion process. The dissolution tests revealed that the coating was nondissolvable in the cell culture medium. Annealing the coated sample at 700 °C for 1 h seemed to enhance its bonding properties to the substrate. Also, the biocompatibility of the coatings was confirmed by human bone marrow derived cells in vitro. The developed method provides a new possibility to produce thin film coatings on titanium implants with bone-type hydroxyapatite that is biocompatible with human osteoblasts and osteoclasts.

Effect of bioactive extruded PLA/HA composite films on focal adhesion formation of preosteoblastic cells.

The quality of the initial cell attachment to a biomaterial will influence any further cell function, including spreading, proliferation, differentiation and viability. Cell attachment is influenced by the material's ability to adsorb proteins, which is related to the surface chemistry and topography of the material. In this study, we incorporated hydroxyapatite (HA) particles into a poly(lactic acid) (PLA) composite and evaluated the surface structure and the effects of HA density on the initial cell attachment in vitro of murine calvarial preosteoblasts (MC3T3-EI). Scanning electron microscopy (SEM), atomic force microscopy (AFM) and infrared spectroscopy (FTIR) showed that the HA particles were successfully incorporated into the PLA matrix and located at the surface which is of importance in order to maintain the bioactive effect of the HA particles. SEM and AFM investigation revealed that the HA density (particles/area) as well as surface roughness increased with HA loading concentration (i.e. 5, 10, 15 and 20wt%), which promoted protein adsorption. Furthermore, the presence of HA on the surface enhanced cell spreading, increased the formation of actin stress fibers and significantly improved the expression of vinculin in MC3T3-E1 cells which is a key player in the regulation of cell adhesion. These results suggest the potential utility of PLA/HA composites as biomaterials for use as a bone substitute material and in tissue engineering applications.

Affecting osteoblastic responses with in vivo engineered potato pectin fragments.

Pectins, complex plant-derived polysaccharides, are novel candidates for biomaterial nanocoatings. Pectic rhamnogalacturonan-I regions (RG-I) can be enzymatically treated to so-called modified hairy regions (MHR). We surveyed the growth and differentiation of murine preosteoblastic MC3T3-E1 cells on Petri dishes coated with RG-Is from native or genetically engineered potato tubers. Uncoated tissue culture polystyrene (TCPS) and aminated (AMI) dishes served as controls. MHRPTR_GAL sample was depleted of galactose (9 mol % galactose; 23 mol % arabinose) and MHRPTR_ARA of arabinose (61 mol % galactose; 6 mol % arabinose). Wild-type (modified hairy region from potato pectin (MHRP)_WT) fragment contained default amounts (58 mol % galactose; 13 mol % arabinose) of both sugars. Focal adhesions (FAs) indicating cellular attachment were quantified. Reverse transcriptase polymerase chain reaction (RT-PCR) of alkaline phosphatase and osteocalcin genes indicating osteoblastic differentiation was performed along with staining the produced calcium with tetracycline as an indicator of osteoblastic differentiation. Osteoblasts proliferated on all the samples to some extent. The control surfaces performed better than any of the pectin samples, of which the MHRP_WT seemed to function best. FA length was greater on MHRPTR_GAL than on other pectin samples, otherwise the mutants did not significantly deviate. RT-PCR results indicate that differences between the samples at the gene expression level might be even subtler. However, tetracycline-stained calcium-containing mineral was detected merely only on uncoated TCPS. These results indicate the possibility to affect bone cell growth with in vivo-modified pectin fragments, consecutively providing information on the significance of certain monosaccharides on the biocompatibility of these polysaccharides.

Pectin-coated titanium implants are well-tolerated in vivo.

Multiform coated titanium implants are widely used in orthopedic and dental surgery. In this study, we have investigated the reactivity of pectin-coated titanium samples implanted under the latissimus dorsi-muscle fascia of rats. Samples were coated with two enzyme treated apple pectins; modified hairy regions (MHR-A and MHR-B) that differed in chemical structure. Aminated (AMI) and uncoated titanium (Ti) served as controls. The thicknesses of the peri-implant fibrous tissue capsules formed 1 or 3 weeks after implantation were measured as indicative of possible inflammatory reactions toward the biomaterials. After 1 week, the MHR-B implant was surrounded by a thicker fibrous capsule (42.9 microm) than any of the other sample types: MHR-A (33.2 microm), AMI (32.5 microm), and Ti (32.3 microm), the last one being the only statistically significant difference. After 3 weeks, however, this difference disappeared; the capsule thicknesses around MHR-B and Ti implants had decreased to the values found for AMI and MHR-A. Additionally, the capsule formation represents merely a stromal rather than an inflammatory reaction, as indicated by the absence of activated macrophages or foreign body giant cells in the capsules. These results indicate for the first time the in vivo tolerability of covalently linked pectins, and suggest the feasibility of pectin-coated bone and dental implants for clinical use.

Effect of modified pectin molecules on the growth of bone cells.

The aim of this study was to investigate molecular candidates for bone implant nanocoatings, which could improve biocompatibility of implant materials. Primary rat bone cells and murine preosteoblastic MC3T3-E1 cells were cultured on enzymatically modified hairy regions (MHR-A and MHR-B) of apple pectins. MHRs were covalently attached to tissue culture polystyrene (TCPS) or glass. Uncoated substrata or bone slices were used as controls. Cell attachment, proliferation, and differentiation were investigated with fluorescence and confocal microscopy. Bone cells seem to prefer MHR-B coating to MHR-A coating. On MHR-A samples, the overall numbers as well as proportions of active osteoclasts were diminished compared to those on MHR-B, TCPS, or bone. Focal adhesions indicating attachment of the osteoblastic cells were detected on MHR-B and uncoated controls but not on MHR-A. These results demonstrate the possibility to modify surfaces with pectin nanocoatings.