RESUMO
Variation, run-off and degradation characteristics of the insecticide dinotefuran, (EZ)-(RS)-1-methyl-2-nitro-3-(tetrahydro-3-furyl-methyl)guanidine, in water and soil from two paddy fields after aerial application was investigated as well as in river water. Maximum concentrations of dinotefuran were 290 and 720 µg/L in the two paddy waters, 25 and 28 µg/kg dry in the two paddy soils, and 10 µg/L in the river water. Runoff ratios of dinotefuran from the paddy fields were calculated as 14%-41%. Mean half-lives of dinotefuran were 5.4 days in the paddy water and 12 days in the paddy soil. Results obtained in this study are important for the evaluation of the actual behavior of dinotefuran in paddy fields and rivers.
Assuntos
Biodegradação Ambiental , Guanidinas/metabolismo , Nitrocompostos/metabolismo , Rios/química , Poluentes Químicos da Água/análise , Agricultura , Ar , Água Doce , Neonicotinoides , Solo , Água , Movimentos da ÁguaRESUMO
Behavior of the herbicide pyrazolynate, 4-(2,4-dichlorobenzoyl)-1,3-dimethylpyrazol-5-yl p-toluenesulfonate, in paddy water and soil after application to paddy fields was investigated to evaluate the hydrolyzation to destosyl pyrazolynate (DTP), 4-(2,4-dichlorobenzoyl)-1,3-dimethyl-5-hydroxypyrazole. The respective maximum concentrations of pyrazolynate and DTP were 440-1,240 and 200-260 µg/L, respectively, in the paddy water, and 610-860 µg/kg dry and 460-730 µg/kg dry in the paddy soil. The applied pyrazolynate was drained from the paddy fields as DTP. The runoff ratios of DTP from the paddy fields were calculated as 19 % ± 14 %. The respective mean values of the half-lives of pyrazolynate and DTP were 0.87 ± 0.091 and 17 ± 1.4 days in the paddy water and 2.2 ± 0.70 and 26 ± 2.1 days in the paddy soil, respectively.
Assuntos
Monitoramento Ambiental , Herbicidas/análise , Modelos Químicos , Pirazóis/análise , Poluentes Químicos da Água/análise , Agricultura , OryzaRESUMO
Behavior of the herbicide bromobutide, (RS)-2-bromo-N-(α,α-dimethylbenzyl)-3,3-dimethylbutyramide, in paddy water and soil after application to paddy fields was investigated to evaluate the degradation to bromobutide-debromo, N-(α,α-dimethylbenzyl)-3,3-dimethylbutyramide, and runoff of the herbicide. The respective maximum concentrations of bromobutide and the metabolite were 1,6402,230 and 11.115.8 µg/L in the paddy water, and 2,2104,140 µg/kg dry and 74119 µg/kg dry in the paddy soil, respectively. The runoff ratios of the applied bromobutide from the paddy fields were calculated as 28 ± 16%. The respective mean values of the half-lives of bromobutide in the paddy water and the soil were 2.7 ± 0.34 days and 6.9 ± 2.6 days, respectively.
Assuntos
Água Doce/química , Herbicidas/química , Hidrocarbonetos Bromados/química , Solo/química , Poluentes Químicos da Água/química , Agricultura , Monitoramento Ambiental , Herbicidas/análise , Hidrocarbonetos Bromados/análise , Cinética , Oryza , Poluentes Químicos da Água/análiseRESUMO
Variations in concentrations of herbicide bromobutide (RS)-2-bromo-N-(α,α-dimethylbenzyl)-3,3-dimethylbutyramide, and its metabolite bromobutide-debromo, N-(α,α-dimethylbenzyl)-3,3-dimethylbutyramide were investigated in soils from three paddy fields used for rice farming at 24 weeks after application. The bromobutide concentration was maximum within 24 h after application. That of bromobutide-debromo was maximum within 5-7 days of application. Each gradually decreased to below detection limits at 12-22 weeks after application. Bromobutide was detected up to 76-104 days after application in the paddy soils, whereas bromobutide-debromo was detected up to 125 days after application. The bromobutide composition was higher than 90 % within 6 days of application, decreasing to less than 5 % by 125 days of application. The decrease of bromobutide amount in the soil was inferred as the first-order reaction. The bromobutide half-life was calculated as 12-21 days (16 days mean) during 18-104 days following application.
Assuntos
Agricultura , Herbicidas/análise , Hidrocarbonetos Bromados/análise , Solo/química , Poluentes Químicos da Água/análise , Monitoramento Ambiental , Meia-Vida , OryzaRESUMO
Characteristic distributions of Al, Mn, Fe, Ni, Zn, and Pb were investigated in the surface sediments of a small river (Niitsu River) flowing through both urban and agricultural areas, along with comparison with those from the upper main stream (Nodai River). The mean compositions of the most mobile metals were ordered as Zn = Mn > Ni = Pb = Fe > Al in the Niitsu River. They were Mn = Zn = Pb = Fe > Ni = Al in the Nodai River. Mn, Fe, Ni, and Zn in the Niitsu River showed higher compositions of mobile (2.9%-36%) and oxidizable (6.6%-16%) phases than those in the Nodai River. The Ni and Zn in the Niitsu River also had higher reducible phase composition (15% and 16%, respectively). In the Niitsu River, Pb had the higher oxidizable composition (29%). Over 90% of Al was in the lithogenic phase in the two rivers.
Assuntos
Agricultura/estatística & dados numéricos , Sedimentos Geológicos/química , Metais/análise , Poluentes Químicos da Água/análise , Monitoramento Ambiental , Japão , Rios/química , Poluição Química da Água/estatística & dados numéricosRESUMO
The characteristic distributions of 12 metals (Al, Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn, Sr, Cd and Pb) were investigated in surface sediments from a small river (Niitsu River) flowing through both urban and agricultural areas by comparison with those from the upper main stream (Nodai River). Among the investigated metals, the mean concentrations of Al, Cr, Fe, Zn, Cd and Pb in the Niitsu River were significantly higher than those in the Nodai River. The investigated sites can be characterized by the principal components 1-3.
Assuntos
Sedimentos Geológicos/química , Metais/análise , Rios/química , Poluentes Químicos da Água/análise , Agricultura/estatística & dados numéricos , Cidades/estatística & dados numéricos , Monitoramento Ambiental , Japão , Poluição Química da Água/estatística & dados numéricosRESUMO
As a groundwater contaminant, 1,4-dioxane is of considerable concern because of its toxicity, refractory nature to degradation, and rapid migration within an aquifer. Although landfill leachate has been reported to contain significant levels of 1,4-dioxane, the origin of 1,4-dioxane in leachate has not been clarified until now. In this study, the origins of 1,4-dioxane in landfill leachate were investigated at 38 landfill sites and three incineration plants in Japan. Extremely high levels of 1,4-dioxane 89 and 340 microg l(-1), were detected in leachate from two of the landfill sites sampled. Assessments of leachate and measurement of 1,4-dioxane in incineration residues revealed the most likely source of 1,4-dioxane in the leachate to be the fly ash produced by municipal solid waste incinerators. Effective removal of 1,4-dioxane in leachate from fly ash was achieved using heating dechlorination systems. Rapid leaching of 1,4-dioxane observed from fly ash in a sequential batch extraction indicated that the incorporation of a waste washing process could also be effective for the removal of 1,4-dioxane in fly ash.
Assuntos
Dioxanos/análise , Incineração , Eliminação de Resíduos/métodos , Resíduos/análise , Poluentes Químicos da Água/análise , Cromatografia Gasosa-Espectrometria de MassasRESUMO
Techniques for enhancing the biodegradation of oil-contaminated fine soils in a slurry-phase bioreactor were investigated. Using a model system consisting of kaolin particles containing adsorbed n-dodecane as a diesel fuel surrogate, we investigated how increasing the temperature and adding a surfactant and various hydrophobic support media affected the biodegradation rate of n-dodecane. Increasing the temperature from 25 to 35 degrees C decreased the time required for complete degradation of n-dodecane by 30%, from 110h to 80h. Addition of the surfactant polyethylene glycol p-1,1,3,3-tetramethylbutylphenyl ether decreased the degradation time to less than 48h at 35 degrees C, although a high concentration of the surfactant (3000mgl(-1)) was required. We suspect that the surfactant increased the degradation rate by solubilizing the n-dodecane into the solution phase in which the microorganisms were suspended. We tested five types of organic polymers as support media for the microorganisms and found that the biodegradation time could be reduced by approximately 50% with a support medium made from polyurethane; in the presence of this medium, only 36h was required for complete decomposition at 35 degrees C. The reduction in the degradation time was probably due to transfer of the n-dodecane from the soil to the support medium, which improved contact between the n-dodecane and the microorganisms. The polyurethane support medium bearing the microorganisms was stable and could be reused.
Assuntos
Biodegradação Ambiental , Reatores Biológicos , Petróleo/metabolismo , Poluentes do Solo/metabolismo , Adsorção , Alcanos/metabolismo , Tensoativos/farmacologiaRESUMO
Biodegradation rates of polycyclic aromatic hydrocarbons (PAHs) in spilled oil stranded on tidal flats were evaluated using model reactors to clarify the effects of non-aqueous phase liquid (NAPL) on the biodegradation of PAHs in stranded oil on tidal flat with special emphasis on the relationship between dissolution rates of PAHs into water and viscosity of NAPL. Biodegradation of PAHs in NAPL was limited by the dissolution rates of PAHs into water. Biodegradation rate of chrysene was smaller than that of acenaphtene and phenanthrene due to the smaller dissolution rates. Dissolution rates of PAHs in fuel oil C were smaller than those in crude oil due to high viscosity of fuel oil C. Hence, biodegradation rates of PAHs in fuel oil C were smaller than those in crude oil. Biodegradation rates of PAHs in NAPL with slow rate of decrease like fuel oil C was slower than those in NAPL with rapid rate of decrease like crude oil. The smaller rate of decrease of fuel oil C than crude oil was due to the higher viscosity of fuel oil C. Therefore, not only the dissolution rate of PAHs but also the rates of decrease of NAPL were important factors for the biodegradation of PAHs.
Assuntos
Hidrocarbonetos Policíclicos Aromáticos/metabolismo , Poluentes Químicos da Água/metabolismo , Biodegradação Ambiental , Ecossistema , Monitoramento Ambiental , Sedimentos Geológicos/química , SolubilidadeRESUMO
Chlorinated and non-halogenated organophosphorus flame retardants (OPFRs) including tris(2-chloroisopropyl) phosphate (TCIPP), diethylene glycol bis(di(2-chloroisopropyl) phosphate) (DEG-BDCIPP), triphenyl phosphate (TPHP), and bisphenol A bis(diphenyl phosphate) (BPA-BDPP) have been used increasingly as alternatives to polybrominated diphenyl ethers and other brominated flame retardants. For this study, five batches of incineration experiments of wastes containing approximately 1% of TCIPP, DEG-BDCIPP, TPHP, and BPA-BDPP were conducted using a pilot-scale incinerator. Destruction and emission behaviors of OPFRs were investigated along with the effects on behaviors of unintentional persistent organic pollutants (POPs) such as polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), dioxin-like polychlorinated biphenyls (dl-PCBs), hexachlorobenzene (HCB), pentachlorobenzene (PeCB), and pentachlorophenol (PCP). Incineration conditions were chosen according to current regulations for waste incinerators in Japan and UNEP. The OPFRs in the input materials were mainly destroyed in the primary combustion with destruction efficiencies greater than 99.999%. Concentrations of the OPFRs in the exhaust gases and ash were, respectively, <0.01-0.048 µg m(-3) and <0.5-68 µg kg(-1). Almost all of the total phosphorus in the input materials was partitioned into the ash, but less into final exit gases, indicating negligible emissions of volatile phosphorus compounds during incineration. Inputs of chlorinated OPFRs did not affect the formation markedly. Destruction and emission behaviors of unintentional POPs were investigated. Emissions of such POPs in exhaust gases and the ash were lower than the Japanese and international standards. Results show that even in wastes with high contents of chlorinated and non-halogenated OPFRs, waste incineration by the current regulations for the waste incinerators can control environmental emissions of OPFRs and unintentional POPs. Incineration is regarded as a best available technology (BAT) for waste management systems.
Assuntos
Retardadores de Chama/análise , Éteres Difenil Halogenados/análise , Incineração/métodos , Compostos Organofosforados/análise , JapãoRESUMO
The performance of a ferric ion mediated photochemical process for perfluorooctanoic acid (PFOA) decomposition in strongly acidic conditions of pH 2.0 was evaluated in comparison with those in weakly acidic conditions, pH 3.7 or pH 5.0, based on iron species composition and ferric ion regeneration. Complete decomposition of PFOA under UV irradiation was confirmed at pH 2.0, whereas perfluoroheptanoic acid (PFHpA) and other intermediates were accumulated in weakly acidic conditions. Iron states at each pH were evaluated using a chemical equilibrium model, Visual MINTEQ. The main iron species at pH 2.0 is Fe(3+) ion. Although Fe(3+) ion is consumed and is transformed to Fe(2+) ion by photochemical decomposition of PFOA and its intermediates, the produced Fe(2+) ion will change to Fe(3+) ion to restore chemical equilibrium. Continuous decomposition will occur at pH 2.0. However, half of the iron cannot be dissolved at pH 3.7. The main species of dissolved iron is Fe(OH)(2+). At pH 3.7 or higher pH, Fe(3+) ion will only be produced from the oxidation of Fe(2+) ion by hydroxyl radical produced by Fe(OH)(2+) under UV irradiation. These different mechanisms of Fe(3+) regeneration that prevail in strongly and weakly acidic conditions will engender different performances of the ferric ion.
Assuntos
Caprilatos/isolamento & purificação , Compostos Férricos/química , Fluorocarbonos/isolamento & purificação , Raios Ultravioleta , Poluentes Químicos da Água/isolamento & purificação , Purificação da Água/métodos , Caprilatos/química , Caprilatos/efeitos da radiação , Fluorocarbonos/química , Fluorocarbonos/efeitos da radiação , Concentração de Íons de Hidrogênio , Águas Residuárias/química , Poluentes Químicos da Água/química , Poluentes Químicos da Água/efeitos da radiaçãoRESUMO
Magnetic carbonaceous materials were produced by carbonization of a cation exchange resin loaded with ferrous or ferric iron and activation using sieved oyster shell as the activation agent. The magnetic carbonaceous material with the maximum magnetic flux density on every axis (ESS-1) was obtained from the ferric-loaded resin by carbonization at 700°C, followed by activation with the oyster shell at 900°C, and magnetization. A separate step of carbonization and activation appears to cause more of a reduction reaction of Fe to form γ-Fe(2)O(3). The Fe compound in the magnetic carbonaceous material was identified from the XRD pattern as mainly γ-Fe(2)O(3). The magnetic flux density on every axis increased linearly as the amount of the oyster shell increased. Moreover, the adsorption ability of the products was evaluated for pesticides and metal ions. Both ESS-1 and a carbonaceous material obtained from the resin without ferric ion (RC) appear to have the highest adsorption ability for lead. Furthermore, the adsorption ability of ESS-1 might decrease by blockages of the pores with the loaded Fe compounds.