Effect of frozen-thawed embryo transfer with a poor-quality embryo and a good-quality embryo on pregnancy and neonatal outcomes.

BACKGROUND: To evaluate the impact of embryo quality and quantity, specifically a poor quality embryo (PQE) in combination with a good quality embryo (GQE), by double embryo transfer (DET) on the live birth rate (LBR) and neonatal outcomes in patients undergoing frozen-thawed embryo transfer (FET) cycles. METHODS: A study on a cohort of women who underwent a total of 1462 frozen-thawed cleavage or blastocyst embryo transfer cycles with autologous oocytes was conducted between January 2018 and December 2021. To compare the outcomes between single embryo transfer (SET) with a GQE and DET with a GQE and a PQE, propensity score matching (PSM) was applied to control for potential confounders, and a generalized estimating equation (GEE) model was used to determine the association between the effect of an additional PQE and the outcomes. Subgroup analysis was also performed for patients stratified by female age. RESULTS: After PS matching, DET-GQE + PQE did not significantly alter the LBR (adjusted odds ratio [OR] 1.421, 95% CI 0.907-2.228) compared with SET-GQE in cleavage-stage embryo transfer but did increase the multiple birth rate (MBR, [OR] 3.917, 95% CI 1.189-12.911). However, in patients who underwent blastocyst-stage embryo transfer, adding a second PQE increased the live birth rate by 7.8% ([OR] 1.477, 95% CI 1.046-2.086) and the multiple birth rate by 19.6% ([OR] 28.355, 95% CI 3.926-204.790), and resulted in adverse neonatal outcomes. For patients who underwent cleavage-stage embryo transfer, transferring a PQE with a GQE led to a significant increase in the MBR ([OR] 4.724, 95% CI 1.121-19.913) in women under 35 years old but not in the LBR ([OR] 1.227, 95% CI 0.719-2.092). The increases in LBR and MBR for DET-GQE + PQE compared with SET-GQE in women older than 35 years were nonsignificant toward. For patients who underwent blastocyst-stage embryo transfer, DET-GQE + PQE had a greater LBR ([OR] 1.803, 95% CI 1.165-2.789), MBR ([OR] 24.185, 95% CI 3.285-178.062) and preterm birth rate (PBR, [OR] 4.092, 95% CI 1.153-14.518) than did SET-GQE in women under 35 years old, while no significant impact on the LBR ([OR] 1.053, 95% CI 0.589-1.884) or MBR (0% vs. 8.3%) was observed in women older than 35 years. CONCLUSIONS: The addition of a PQE has no significant benefit on the LBR but significantly increases the MBR in patients who underwent frozen-thawed cleavage-stage embryo transfer. However, for patients who underwent blastocyst-stage embryo transfer, DET-GQE + PQE resulted in an increase in both the LBR and MBR, which may lead to adverse neonatal outcomes. Thus, the benefits and risks of double blastocyst-stage embryo transfer should be balanced. In patients younger than 35 years, SET-GQE achieved satisfactory LBR either in cleavage-stage embryo transfer or blastocyst-stage embryo transfer, while DET-GQE + PQE resulted in a dramatically increased MBR. Considering the low LBR in women older than 35 years who underwent single cleavage-stage embryo transfer, selective single blastocyst-stage embryo transfer appears to be a more promising approach for reducing the risk of multiple live births and adverse neonatal outcomes.

First report of Cigar Tobacco Root Rot Caused by Setophoma terrestris in China.

Cigar tobacco (Nicotiana tabacum L.) is widely planted in Yunnan, which is becoming an important economic crop in China. In March 2023, root rot of cigar tobacco (cv. Yunxue 38) was observed in Baoshan (98°51'E, 24°58'N), and in July 2022 root rot of tobacco (cv. Yunyan 87) was observed in Dali (99°54'E, 26°30'N), Yunnan Province, China. The average disease incidences surveyed in the fields reached 10%. At the early stage, the bottom leaves showed wilting and turned yellow, and the roots became brown. Following the disease development, the color of roots turned to dark brown and ultimately necrosis. To isolate the causal agent, small pieces (5×5 mm) of diseased root from 6 symptomatic plant samples (three samples of cv. Yunxue 38 and three samples of cv. Yunyan 87) were cut. Pieces were surface-sterilized by dipping in 75% ethanol for 30 s, rinsed three times with sterile distilled water, then transferred to potato dextrose agar (PDA) medium and incubated at 28°C in the dark. Six fungal isolates cultured for 14 days were obtained. They were morphologically similar, so a representative isolate was selected for the following experiment. The colonies grew slowly on PDA, and their color were light pink initially, then changed to amaranth. Hyphae were hyaline and septate. Microconidia were hardly produced on PDA plates. After 14 days of culture on V8 juice agar, the colonies showed white aerial mycelia, and ellipsoidal and transparent conidia were observed, which measured 6.5 to 8.3 × 3.4 to 5.0 µm (n=20). Also, the pycnidia were measured 150 to 220 µm, that were subglobose in dark brown with brown setae. These morphological characteristics of 22DL91 were identical to S. terrestris (Boerema et al. 2004). For molecular identification, DNA was extracted and the PCR products of ITS region and polymerase II second largest subunit (RPB2), amplified with the primers ITS1/ITS4 and RPB2-5F/RPB2-7cR, were sequenced. By BLASTn analysis, the obtained ITS sequences showed 100% homology and the RPB2 sequences showed 95% homology with S. terrestris strains in GenBank (accession ON006851 and OM417590). The sequences were deposited in NCBI with accession numbers OR539491 (ITS) and OR554276 (RPB2), respectively. Based on the morphology and phylogenetic analysis, the isolate was 22DL91 identified as S. terrestris. Pathogenicity was evaluated on 50-day-old cigar tobacco seedlings (cv. Yunxue 38) and tobacco seedlings (cv. Yunyan 87). Ten plants were inoculated with 20 mL of conidial suspension of 105 conidia/mL poured onto the roots and ten control seedlings dipped in sterile water as controls (Luo et al. 2023). After 14 days, all inoculated seedlings showed the symptoms with leaves yellowing and root rot, whereas the control seedlings had no symptoms. Moreover, the fungus S. terrestris was reisolated from the infected roots, fulfilling Koch's postulates. This fungus was previously known to cause pink root on garlic in China (Zhang et al. 2019). To our knowledge, this is the first report of S. terrestris causing root rot of Nicotiana tabacum in China. Therefore, this finding will provide valuable information for prevention and management of root rot on tobacco.

Voltage, thermal and magnetic field fiber sensors based on magnetic nanoparticles-doped photonic liquid crystal fibers.

In this article, highly sensitive voltage, thermal and magnetic field fiber sensors were obtained in magnetic nanoparticles-doped E7 liquid crystals filled into photonic crystal fibers (PLCF). The voltage and temperature sensitivity reached at 12.598 nm/V and -3.874 nm/°C, respectively. The minimum voltage response time is 48.2 ms. The phase transition temperature Tc of liquid crystal with magnetic dopant was reduced from 60 °C to 46 °C. The magnetic field sensor based on magnetic nanoparticles-doped PLCF were obtained with sensitivity of 118.2 pm/mT from 400 to 460 mT.

Retrieving the subwavelength cross-section of dielectric nanowires with asymmetric excitation of Bloch surface waves.

Optical microscopy with a diffraction limit cannot distinguish nanowires with sectional dimensions close to or smaller than the optical resolution. Here, we propose a scheme to retrieve the subwavelength cross-section of nanowires based on the asymmetric excitation of Bloch surface waves (BSWs). Leakage radiation microscopy is used to observe the propagation of BSWs at the surface and to collect far-field scattering patterns in the substrate. A model of linear dipoles induced by tilted incident light is built to explain the directional imbalance of BSWs. It shows the potential capability in precisely resolving the subwavelength cross-section of nanowires from far-field scattering without the need for complex algorithms. Through comparing the nanowire widths measured by this method and those measured by scanning electron microscopy (SEM), the transverse resolutions of the widths of two series of nanowires with heights 55 nm and 80 nm are about 4.38 nm and 6.83 nm. All results in this work demonstrate that the new non-resonant far-field optical technology has potential application in metrology measurements with high precision by taking care of the inverse process of light-matter interaction.

Chip-based wide field-of-view total internal reflection fluorescence microscopy.

Conventional total internal reflection fluorescence (TIRF) microscopy requires either an oil-immersed objective with high numerical aperture or a bulky prism with high refractive index to generate the evanescent waves that work as the illumination source for fluorophores. Precise alignment of the optical path is necessary for optimizing the imaging performance of TIRF microscopy, which increases the operation complexity. In this Letter, a planar photonic chip composed of a dielectric multilayer and a scattering layer is proposed to replace the TIRF objective or the prism. The uniform evanescent waves can be excited under uncollimated incidence through this chip, which simplifies the alignment of the optical configurations and provides shadowless illumination. Due to the separation of the illumination and detection light paths, TIRF microscopy can have a large field-of-view (FOV).

In Situ Quantitative Observation of Hygroscopic Growth of Single Nanoparticle Aerosol by Surface Plasmon Resonance Microscopy.

Aerosol particle hygroscopicity is an important factor in visibility reduction, cloud formation, radiation forcing, and the global climate. The high number concentration of nanoparticles (defined as particles with diameters below 100 nm) means that their hygroscopic growth abilities and potential contributions to the climate and environment are significant. Therefore, a rapid and accurate in situ analysis method for single nanoparticle hygroscopic growth in an atmospheric environment is important to characterize the effects of the particle's physical and chemical properties in this process. In this work, surface plasmon resonance microscopy with azimuthal rotation illumination (SPRM-ARI) is used to observe the hygroscopic growth and water content of single nanoparticles in situ. The hygroscopic growth results of a single-component nanoparticle are well matched with the extended aerosol inorganic model (E-AIM) results, and the proposed method remains reliable even when the relative humidity (RH) exceeds 90%. For a bicomponent nanoparticle (with NaCl as the primary content), the presence of a component without deliquescence phase transitions under increasing humidity conditions causes the measured data to differ from both the Zdanovskii-Stokes-Robinson (ZSR) model and E-AIM predictions in the low RH range. However, because of their complete liquefaction, the growth factor (GF) variation of the bicomponent nanoparticle is close to the model predictions in the high RH range. Finally, based on the positive correlation between particle volume and the gray intensity of SPRM-ARI, GF values can be obtained from the cube root of the gray intensity and the actual water content of single nanoparticles can then be derived.

[Testicular histology does not affect the clinical outcomes of ICSI in men with non-obstructive azoospermia].

OBJECTIVE: To investigate whether testicular histology influences the clinical outcomes of intracytoplasmic sperm injection (ICSI) in men with non-obstructive azoospermia (NOA). METHODS: We retrospectively analyzed the clinical data about 73 cases of NOA undergoing ICSI, including 105 ICSI cycles and 79 embryo transfer cycles. The infertility of the patients was attributed to male factors only or both male and female tube factors and the females' age was ≤38 years. Based on testicular histology, we divided the ICSI cycles into three groups: hypospermatogenesis (HS, n = 72), maturation arrest (MA, n = 21) and Sertoli cells only (SCO, n = 12). We recorded and analyzed the age of both the males and females, infertility duration, base follicle-stimulating hormone (FSH) level, dose and days of gonadotropin (Gn) administration, estradiol (E2) and progesterone (P) levels on the day of human chorionic gonadotropin (hCG) administration, endometrial thickness, number of metaphase II (MII) oocytes, and rates of fertilization, transferrable embryos, high-quality embryos, clinical pregnancy, and abortion. RESULTS: The rates of fertilization, failed fertilization, transferrable embryos, and high-quality embryos, and the average number of transferred embryos were 67.03% (553/825), 9.52% (10/105), 85.66% (472/551), 35.03% (193/551), and 2.10, respectively, resulting in 44 pregnancies (55.70%) and 42 live births (53.16%), with no birth defects. No statistically significant differences were observed among the HS, MA and SCO groups in the mean age of the men and women, infertility duration, base FSH level, Gn dose, Gn days, E2 and P levels on the hCG day, endometrial thickness, or number of MII oocytes, nor in the rates of fertilization (68.51% vs 64.39% vs 61.45%), transferrable embryos (85.05% vs 90.48% vs 83.05%), or high-quality embryos (33.09% vs 41.67% vs 38.98%). The rates of clinical pregnancy and embryo implantation were higher in the HS (60.00% and 37.61%) and SCO (62.50% and 50.00%) than in the MA group (37.50% and 21.21%), but with no statistically significant differences (P >0.05). CONCLUSIONS: Once testicular sperm is retrieved, desirable clinical outcomes can be achieved in ICSI for NOA patients, which is not affected by testicular histopathology.

Observation of the photonic Hall effect and photonic magnetoresistance in random lasers.

Modulation of scattering in random lasers (RLs) by magnetic fields has attracted much attention due to its rich physical insights. We fabricate magnetic gain polymer optical fiber to generate RLs. From macroscopic experimental phenomena, with the increase of the magnetic field strength, the magnetic transverse photocurrent exists in disordered multiple scattering of RLs and the emission intensity of RLs decreases, which is the experimental observation of photonic Hall effect (PHE) and photonic magnetoresistance (PMR) in RLs. At the microscopic level, based on the field dependence theory of magnetic disorder in scattered nanoparticles and the replica symmetry breaking theory, the magnetic-induced transverse diffusion of photons reduces the scattering disorder, and then decreases the intensity fluctuation disorder of RLs. Our work establishes a connection between the above two effects and RLs, visualizes the influence of magnetic field on RL scattering at the microscopic level, which is crucial for the design of RLs.

Metal-organic framework-based self-healing hydrogel fiber random lasers.

Metal-organic frameworks (MOFs), which have well-defined nanoporous skeletons and whose natural structure can work as optical resonant cavities, are emerging as ideal platforms for constructing micro/nanolasers. However, lasing generated from the light oscillating inside a defined MOFs' cavity usually suffers the drawback of the lasing performance being difficult to maintain once the cavity is destroyed. In this work, we report a MOF-based self-healing hydrogel fiber random laser (MOF-SHFRL) that can withstand extreme damage. The optical feedback of MOF-SHFRLs does not depend on the light reflection inside the MOF cavity but comes from the multiple scattering effects from the MOF nanoparticles (NPs). The hydrogel fiber's one-dimensional waveguide structure also permits confined directional lasing transmission. Based on such an ingenious design, a robust random lasing is achieved without worrying about the destruction of the MOF NPs. More interestingly, the MOF-SHFRL demonstrates excellent self-healing ability without any external stimulation: it can fully recover its initial morphology and lasing performance even when totally broken (e.g., cut into two parts). The lasing threshold also remains stable, and the optical transmission capability can recover by more than 90% after multiple breaks and self-healing processes. These results indicate that the MOF-SHFRL is a highly stable optical device that can be expected to play a significant role in environmental monitoring, intelligent sensing, and other aspects under extreme conditions.

Back focal plane imaging for light emission from a tunneling junction in a low-temperature ultrahigh-vacuum scanning tunneling microscope.

We report the design and realization of the back focal plane (BFP) imaging for the light emission from a tunnel junction in a low-temperature ultrahigh-vacuum (UHV) scanning tunneling microscope (STM). To achieve the BFP imaging in a UHV environment, a compact "all-in-one" sample holder is designed and fabricated, which allows us to integrate the sample substrate with the photon collection units that include a hemisphere solid immersion lens and an aspherical collecting lens. Such a specially designed holder enables the characterization of light emission both within and beyond the critical angle and also facilitates the optical alignment inside a UHV chamber. To test the performance of the BFP imaging system, we first measure the photoluminescence from dye-doped polystyrene beads on a thin Ag film. A double-ring pattern is observed in the BFP image, arising from two kinds of emission channels: strong surface plasmon coupled emissions around the surface plasmon resonance angle and weak transmitted fluorescence maximized at the critical angle, respectively. Such an observation also helps to determine the emission angle for each image pixel in the BFP image and, more importantly, proves the feasibility of our BFP imaging system. Furthermore, as a proof-of-principle experiment, electrically driven plasmon emissions are used to demonstrate the capability of the constructed BFP imaging system for STM induced electroluminescence measurements. A single-ring pattern is obtained in the BFP image, which reveals the generation and detection of the leakage radiation from the surface plasmon propagating on the Ag surface. Further analyses of the BFP image provide valuable information on the emission angle of the leakage radiation, the orientation of the radiating dipole, and the plasmon wavevector. The UHV-BFP imaging technique demonstrated here opens new routes for future studies on the angular distributed emission and dipole orientation of individual quantum emitters in UHV.

[Testicular sperm cryopreservation for male fertility preservation].

OBJECTIVE: To investigate the effectiveness of testicular sperm cryopreservation in male fertility preservation by evaluating the clinical outcome of ICSI cycles with frozen-thawed testicular sperm for azoospermia patients. METHODS: We retrospectively analyzed 96 samples of cryopreserved testicular sperm obtained by testicular biopsy, vasovasostomy (V-V), vasoepididymostomy (V-E) , of which 55 were subjected to 60 ICSI cycles with frozen-thawed testicular sperm. We evaluated the rates of sperm recovery, fertilization, cleavage, transferable and good-quality embryos, clinical pregnancy, pregnancy outcome, and health of the newborns. RESULTS: All the frozen testicular sperm samples were recovered successfully. The rates of fertilization, 2PN fertilization, cleavage, available embryos and good-quality embryos were 77.6, 69.4, 99.4, 84.5 and 40.8%, respectively. There were transferable embryos in all cycles. Fresh embryos were transferred in 52 of the 60 cycles, with the clinical pregnancy rate of 57.7% (30/52), including 19 singletons and 11 twins, and the rates of implantation and miscarriage were 38.7% (41/106) and 3.33% (1/30). Up to the present time, there have been 20 healthy newborns, including 12 boys and 8 girls, and another 13 ongoing pregnancies. No birth defects have been found so far. CONCLUSION: Desirable clinical outcomes can be obtained from ICSI cycles with frozen-thawed testicular sperm, and testicular sperm cryopreservation is an effective method of fertility preservation for azoospermia males.

Dexamethasone application for in vitro fertilisation in non-classic 17-hydroxylase/17,20-lyase-deficient women.

Context: High progesterone levels in the follicular stage interfere with the implantation window, causing infertility in women with 17-hydroxylase/17,20-lyase deficiency (17OHD). Dexamethasone can restore cortisol deficiency and suppress inappropriate mineralocorticoid secretion to control hypertension in 17OHD patients, but poses risks to the foetus if administered during pregnancy. Objective: We prospectively explored a rational glucocorticoid use protocol for assistive reproduction in a woman with non-classic 17OHD that reduced glucocorticoid side effects. Method: In this study, the treatment protocol for this 17OHD patient included the following steps. First, the appropriate type and dose of glucocorticoid for endogenous progesterone suppression was determined. Then, glucocorticoid was discontinued to increase endogenous progesterone levels for ovarian stimulation. Next, dexamethasone plus GnRHa were used to reduce progesterone levels in frozen embryos for transfer. Once pregnancy was confirmed, dexamethasone was discontinued until delivery. Results: Dexamethasone, but not hydrocortisone, reduced progesterone levels in the 17OHD woman. After endogenous progesterone-primed ovarian stimulation, 11 oocytes were retrieved. Seven oocytes were 2PN fertilised and four day-3 and two day-5 embryos were cryopreserved. After administering dexamethasone plus gonadotropin-releasing hormone agonist (GnRHa) to reduce progesterone levels to normal, hormone replacement therapy was administered until the endometrial width reached 9 mm. Exogenous progesterone (60 mg/day) was used for endometrial preparation. Two thawed embryos were transferred on day 4. Dexamethasone was continued until pregnancy confirmation on the 13th day post-transfer. Two healthy boys, weighing 2100 and 2000 g, were delivered at 36 weeks' gestation. Conclusion: Rational use of dexamethasone synchronised embryonic development with the endometrial implantation window, while not using in post-implantation avoided its side effects and promoted healthy live births in women non-classic 17OHD undergoing in vitro fertilisation.

Planar photonic chips with tailored angular transmission for high-contrast-imaging devices.

A limitation of standard brightfield microscopy is its low contrast images, especially for thin specimens of weak absorption, and biological species with refractive indices very close in value to that of their surroundings. We demonstrate, using a planar photonic chip with tailored angular transmission as the sample substrate, a standard brightfield microscopy can provide both darkfield and total internal reflection (TIR) microscopy images with one experimental configuration. The image contrast is enhanced without altering the specimens and the microscope configurations. This planar chip consists of several multilayer sections with designed photonic band gaps and a central region with dielectric nanoparticles, which does not require top-down nanofabrication and can be fabricated in a larger scale. The photonic chip eliminates the need for a bulky condenser or special objective to realize darkfield or TIR illumination. Thus, it can work as a miniaturized high-contrast-imaging device for the developments of versatile and compact microscopes.

Switchable Assembly and Guidance of Colloidal Particles on an All-Dielectric One-Dimensional Photonic Crystal.

Dielectric multilayer photonic-band-gap structures, called one-dimensional photonic crystals (1DPCs), have drawn considerable attention in the fields of physics, chemistry, and biophotonics. Here, experimental results verify the feasibility of a 1DPC working as a substrate for switchable manipulations of colloidal microparticles. The optically induced thermal convective force on a 1DPC can assemble colloidal particles that are dispersed in a water solution, while the photonic scattering force on the same 1DPC caused by propagating evanescent waves can guide these particles. Additionally, in the 1DPC, one internal mode can be excited that has seldom been noticed previously. This mode shows an ability to assemble particles over large areas even when the incident power is low. The assembly and guidance of colloidal particles on the 1DPC are switchable just through tuning the polarization and angle of the incident laser beam. Numerical simulations are carried out, which are consistent with these experimental observations.

Optical Trapping with Focused Surface Waves.

Near-field optical trapping can be realized with focused evanescent waves that are excited at the water-glass interface due to the total internal reflection, or with focused plasmonic waves excited on the water-gold interface. Herein, the performance of these two kinds of near-field optical trapping techniques is compared using the same optical microscope configuration. Experimental results show that only a single-micron polystyrene bead can be trapped by the focused evanescent waves, whereas many beads are simultaneously attracted to the center of the excited region by focused plasmonic waves. This difference in trapping behavior is analyzed from the electric field intensity distributions of these two kinds of focused surface waves and the difference in trapping behavior is attributed to photothermal effects due to the light absorption by the gold film.

Real-Time Measurement of the Hygroscopic Growth Dynamics of Single Aerosol Nanoparticles with Bloch Surface Wave Microscopy.

The growth in aerosol particles caused by water uptake during increasing ambient relative humidity alters the physical and chemical properties of aerosols, which then affects public health, atmospheric chemistry, and the Earth's climate. The temporal resolution and sensitivity of current techniques are not sufficient to measure the growth dynamics of single aerosol nanoparticles. Additionally, the specific time required for phase transition from solid to aqueous has not been measured. Here, we describe a label-free photonic microscope that uses the Bloch surface waves as the illumination source for imaging and sensing to provide real-time measurements of the hygroscopic growth dynamics of a single aerosol (diameter <100 nm) containing the main components of air pollution. This specific time can be measured for both pure and mixed aerosols, showing that organics will delay the phase transition. This photonic microscope can be extended to investigate physicochemical reactions of various aerosols, and then knowing this specific time will be favorable for understanding the reaction kinetics among single aerosols and the surrounding medium.

Trapping metallic particles using focused Bloch surface waves.

Metallic particles are promising for applications in various areas, including optical sensing, imaging and electric field enhancement-induced optical and thermal effects. The ability to trap or transport these particles stably will be important in these applications. However, while traditional optical tweezers can trap metallic Rayleigh particles easily, it is difficult to trap metallic mesoscopic/Mie particles because of the strong scattering forces that come from the far-field trapping laser beam. Here we demonstrate that metallic particles can be trapped stably using focused Bloch surface waves that propagate in the near-field region of a dielectric multilayer structure with a photonic band gap. Focused Bloch surface waves can be excited efficiently using an annular beam with azimuthal polarization and a high-numerical-aperture objective. Numerical simulations were performed to calculate the optical forces loaded on a gold particle by focused Bloch surface waves and the results were consistent with those of the experimental observations.

Author Correction: Dissymmetry enhancement in enantioselective synthesis of helical polydiacetylene by application of superchiral light.

The original version of the Article contained an error in Figure 2 in which the TEM images in Fig. 2b and d were incorrect. Additionally, the seventh sentence of the 'Mechanism for the dissymmetry enhancement of SCL field' section of the Methods originally contained a mistake in the first equation. This has been corrected in both the PDF and HTML versions of the Article.

Label-free surface-sensitive photonic microscopy with high spatial resolution using azimuthal rotation illumination.

Surface plasmon resonance microscopy (SPRM) with single-direction illumination is a powerful platform for biomedical imaging because of its wide-field, label-free, and high-surface-sensitivity imaging capabilities. However, two disadvantages prevent wider use of SPRM. The first is its poor spatial resolution that can be as large as several micrometers. The second is that SPRM requires use of metal films as sample substrates; this introduces working wavelength limitations. In addition, cell culture growth on metal films is not as universally available as growth on dielectric substrates. Here we show that use of azimuthal rotation illumination allows SPRM spatial resolution to be enhanced by up to an order of magnitude. The metal film can also be replaced by a dielectric multilayer and then a different label-free surface-sensitive photonic microscopy is developed, which has more choices in terms of the working wavelength, polarization, and imaging section, and will bring opportunities for applications in biology.

Dissymmetry enhancement in enantioselective synthesis of helical polydiacetylene by application of superchiral light.

Superchiral light, generated by the interference of two counter-propagating circularly polarized light (CPL) with same frequency, opposite handedness and different intensity, exhibits enhanced dissymmetry in its interaction with chiral molecules, and has the potential for ultrasensitive detection and characterization of chiral molecules. It is anticipated that the enhanced optical dissymmetry in superchiral light (SCL) field may be utilized to promote asymmetric photochemical reactions efficiency. Herein we reported SCL impart greater chiral bias to trigger asymmetric photo-polymerization reaction from initially achiral diacetylene (DA) monomer, and the enhanced optical dissymmetry for whole polydiacetylene (PDA) films could be achieved. An explanation based on the chiral transfer and amplification of chiral bias from SCL during the polymerization process has been proposed. Moreover, thus formed chiral PDA films polymerized by SCL exhibited enhanced enantioselective recognition ability, and can serve as a direct visual probe for the discrimination of some specific enantiomers.