Dynamics of Drop Formation in the Presence of Interfacial Mass Transfer.

The dynamics of drop formation have been investigated in the presence of interfacial mass transfer through controlled flow visualization experiments. The mixtures of n-hexane (solvent) and acetone (solute) were used as a dispersed phase, having different initial compositions varying over a broad range. Drops were formed at the submerged position in the continuous phase (water) at the same operating flow conditions. The unsteady force balance model is developed to analyze the implications of the simultaneously occurring interfacial transfer of the solute on the formation dynamics in real time, and predictions are validated with experimental results. Based on initial compositions, the analysis of the transient drop shape shows a sharp transition in the drop formation regime. At lower initial solute concentrations, i.e., ϕ0 < 0.2, axisymmetric drop formation occurs and the interfacial solute transfer has negligible effects on the formation dynamics. Over an intermediate range of solute concentrations, i.e., 0.2 < ϕ0 < 0.5, Marangoni instability is triggered along the evolving interface, and therefore, the interface deformations and contractions occur during the drop formation. At ϕ0 = 0.5, the drop takes highly nonaxisymmetric shapes and remains away from equilibrium until its detachment from an orifice. For ϕ0 > 0.5, the spontaneous ejection of plumes of the solute results in the rapid generation of multiple droplets of smaller size. This work shows that higher solute concentration gradients not only lead to faster solute transport but also induce strong interfacial instability simultaneously. Thus, the coupled effects of transient change in composition and fluid properties govern the drop size and its formation time in such systems under non-equilibrium.

Insights into the Synthesis and Kinetics of Silver-on-Silica Core-Shell Particles.

In this study, a heterogeneous nucleation and growth model has been developed to explore the formation mechanism of silver-deposited silica core-shell particles based on the reaction kinetics. To validate the core-shell model, the time-dependent experimental data were quantitatively examined and in situ reduction, nucleation, and growth rates were estimated by optimizing the concentration profiles of reactants and deposited silver particles. Using this model, we also attempted to predict the change in the surface area and diameter of core-shell particles. The concentration of the reducing agent, metal precursor, and reaction temperature were found to have a strong influence on the rate constants and morphology of core-shell particles. Higher rates of nucleation and growth often produced thick, asymmetric patches that covered the entire surface, whereas lower rates produced sparsely deposited silver particles with a spherical shape. The result revealed that by simply tuning the process parameters and controlling the relative rates, the morphology of deposited silver particles and the surface coverage can be controlled while retaining the spherical shape of the core. The present study aims to offer comprehensive data pertaining to the nucleation, growth, and coalescence processes of core-shell nanostructures which will aid in the development and understanding of the principles that govern the formation of nanoparticle-coated materials.

Multi-Step Synthesis of Miltefosine: Integration of Flow Chemistry with Continuous Mechanochemistry.

Herein we report for the first time, an advanced continuous flow synthesis of the blockbuster Leishmaniasis drug miltefosine from simple starting materials by a sequence involving four steps of chemical transformation including a continuous mechanochemical step. First three reaction steps were performed in simple tubular reactors in a telescopic mode, while in the last step the product precipitated from the 3rd step was used for a continuous mechanochemical synthesis of miltefosine. When compared to a typical batch protocol that takes 15 h, miltefosine was obtained in 58 % overall yield in flow synthesis mode at the laboratory scale in a total residence time 34 min at synthesis rate of 10 g/hr, which is sufficient to treat 4800 patients per day.

Design, synthesis, and screening of sulfonylurea-derived NLRP3 inflammasome inhibitors.

Inflammasomes are multiprotein assemblies that produce robust inflammatory responses upon stimulation with pathogen- and/or danger-associated molecular patterns. Uncontrolled inflammasome activation has been linked to the pathophysiology of a wide array of disorders including life-threatening pathogenic infections, e.g., Francisella tularensis. There has been a great deal of interest in the development of small molecule inflammasome inhibitors. Using computational modeling based on chalcone derivatives, we have developed novel tertiary sulfonylurea compounds as inhibitors of the NLRP3 inflammasome. The polar enone functional alert of chalcone was replaced with a sulfonylurea scaffold while maintaining the relative positions of the two aromatic rings. These compounds were evaluated for their ability to inhibit NLRP3 and AIM2 inflammasome activation triggered by Francisella tularensis infection.

Design, synthesis, and biological evaluation of inhibitors of the NADPH oxidase, Nox4.

NADPH oxidases (Nox enzymes) are critical mediators of both physiologic and pathophysiologic processes. Nox enzymes catalyze NADPH-dependent generation of reactive oxygen species (ROS), including superoxide and hydrogen peroxide. Until recently, Nox4 was proposed to be involved exclusively in normal physiologic functions. Compelling evidence, however, suggests that Nox4 plays a critical role in fibrosis, as well as a host of pathologies and diseases. These considerations led to a search for novel, small molecule inhibitors of this important enzyme. Ultimately, a series of novel tertiary sulfonylureas (23-25) was designed using pharmacophore modeling, synthesized, and evaluated for inhibition of Nox4-dependent signaling.

Assessing the possibilities of designing a unified multistep continuous flow synthesis platform.

The multistep flow synthesis of complex molecules has gained momentum over the last few years. A wide range of reaction types and conditions have been integrated seamlessly on a single platform including in-line separation as well as monitoring. Beyond merely getting considered as 'flow version' of conventional 'one-pot synthesis', multistep flow synthesis has become the next generation tool for creating libraries of new molecules. Here we give a more 'engineering' look at the possibility of developing a 'unified multistep flow synthesis platform'. A detailed analysis of various scenarios is presented considering 4 different classes of drugs already reported in the literature. The possible complexities that an automated and controlled platform needs to handle are also discussed in detail. Three different design approaches are proposed: (i) one molecule at a time, (ii) many molecules at a time and (iii) cybernetic approach. Each approach would lead to the effortless integration of different synthesis stages and also at different synthesis scales. While one may expect such a platform to operate like a 'driverless car' or a 'robo chemist' or a 'transformer', in reality, such an envisaged system would be much more complex than these examples.

Insights in the Diffusion Controlled Interfacial Flow Synthesis of Au Nanostructures in a Microfluidic System.

Continuous segmented flow interfacial synthesis of Au nanostructures is demonstrated in a microchannel reactor. This study brings new insights into the growth of nanostructures at continuous interfaces. The size as well as the shape of the nanostructures showed significant dependence on the reactant concentrations, reaction time, temperature, and surface tension, which actually controlled the interfacial mass transfer. The microchannel reactor assisted in achieving a high interfacial area, as well as uniformity in mass transfer effects. Hexagonal nanostructures were seen to be formed in synthesis times as short as 10 min. The wettability of the channel showed significant effect on the particle size as well as the actual shape. The hydrophobic channel yielded hexagonal structures of relatively smaller size than the hydrophilic microchannel, which yielded sharp hexagonal bipyramidal particles (diagonal distance of 30 nm). The evolution of particle size and shape for the case of hydrophilic microchannel is also shown as a function of the residence time. The interfacial synthesis approach based on a stable segmented flow promoted an excellent control on the reaction extent, reduction in axial dispersion as well as the particle size distribution.

Automating multistep flow synthesis: approach and challenges in integrating chemistry, machines and logic.

The implementation of automation in the multistep flow synthesis is essential for transforming laboratory-scale chemistry into a reliable industrial process. In this review, we briefly introduce the role of automation based on its application in synthesis viz. auto sampling and inline monitoring, optimization and process control. Subsequently, we have critically reviewed a few multistep flow synthesis and suggested a possible control strategy to be implemented so that it helps to reliably transfer the laboratory-scale synthesis strategy to a pilot scale at its optimum conditions. Due to the vast literature in multistep synthesis, we have classified the literature and have identified the case studies based on few criteria viz. type of reaction, heating methods, processes involving in-line separation units, telescopic synthesis, processes involving in-line quenching and process with the smallest time scale of operation. This classification will cover the broader range in the multistep synthesis literature.

Continuous flow nitration in miniaturized devices.

This review highlights the state of the art in the field of continuous flow nitration with miniaturized devices. Although nitration has been one of the oldest and most important unit reactions, the advent of miniaturized devices has paved the way for new opportunities to reconsider the conventional approach for exothermic and selectivity sensitive nitration reactions. Four different approaches to flow nitration with microreactors are presented herein and discussed in view of their advantages, limitations and applicability of the information towards scale-up. Selected recent patents that disclose scale-up methodologies for continuous flow nitration are also briefly reviewed.

Continuous flow synthesis of metal nanowires: protocols, engineering aspects of scale-up and applications.

This review comprehensively covers the translation from batch to continuous flow synthesis of metal nanowires (i.e., silver, copper, gold, and platinum nanowires) and their diverse applications across various sectors. Metal nanowires have attracted significant attention owing to their versatility and feasibility for large-scale synthesis. The efficacy of flow chemistry in nanomaterial synthesis has been extensively demonstrated over the past few decades. Continuous flow synthesis offers scalability, high throughput screening, and robust and reproducible synthesis procedures, making it a promising technology. Silver nanowires, widely used in flexible electronics, transparent conductive films, and sensors, have benefited from advancements in continuous flow synthesis aimed at achieving high aspect ratios and uniform diameters, though challenges in preventing agglomeration during large-scale production remain. Copper nanowires, considered as a cost-effective alternative to silver nanowires for conductive materials, have benefited from continuous flow synthesis methods that minimize oxidation and enhance stability, yet scaling up these processes requires precise control of reducing environments and copper ion concentration. A critical evaluation of various metal nanowire ink formulations is conducted, aiming to identify formulations that exhibit superior properties with lower metal solid content. This study delves into the intricacies of continuous flow synthesis methods for metal nanowires, emphasizing the exploration of engineering considerations essential for the design of continuous flow reactors. Furthermore, challenges associated with large-scale synthesis are addressed, highlighting the process-related issues.

Synthesis and biological evaluation of 2-(5-substituted-1-((diethylamino)methyl)-2-oxoindolin-3-ylidene)-N-substituted-hydrazinecarbothioamides.

ABSTRACT: Various 5-substituted-2-(1-((diethylamino)methyl)-2-oxoindolin-3-ylidene)hydrazinecarbothioamide (4a, b) and 5-substituted-2-(1-((diethylamino)methyl)-2-oxoindolin-3-ylidene)-N-(phenyl-4-substituted)hydrazinecarbothioamide (5a-h) derivatives were synthesized. The compounds were screened for cytotoxicity against human HeLa and CEM T-lymphocytes as well as murine L1210 cells. The compounds were also screened for ß-lactamase inhibitory activity, antiviral, antibacterial, and antifungal activity against various strains of microorganisms. Several of these compounds were endowed with low micromolar 50 %-cytostatic concentration (IC50) values, and some were virtually equally potent as melphalan. The most potent inhibitors against the murine leukemia cells (L1210) were also the most inhibitory against human T-lymphocyte (CEM) tumor cells. Derivative 2-(1-((diethylamino)methyl)-2-oxoindolin-3-ylidene)-N-(4-methoxyphenyl)hydrazinecarbothioamide 5c emerged as the most potent cytostatic compound among the tested compounds. Derivatives 4b, 5a, 5b, and 5d showed antiviral activity against HEL cell cultures (IC50 11-20 µM). Moderate antimicrobial activity was observed for all derivatives. The encouraging cytostatic and antiviral activity data provide an adequate rationale for further modification of these molecular scaffolds. GRAPHICAL ABSTRACT: Derivative 5c (1.9-4.4 µM) emerged as the most potent cytostatic compound among the tested compounds. Derivatives 4b, 5a, 5b, and 5d showed antiviral activity against HEL cell cultures (IC50 11-20 µM).

Methyl 2-bromo-3-(4-chloro-benzene-sulfonamido)-benzoate.

In the crystal structure of the title compound, C(14)H(11)BrClNO(4)S, the mol-ecules form inversion dimers with R(2) (2)(8) motifs through pairs of N-H⋯O hydrogen bonds. The benzene rings are not coplanar and subtend a dihedral angle of 66.27 (8)°. The carbomethoxy group makes a dihedral angle of 75.1 (1)° with the ring to which it is attached.

Direct amidation of acids in a screw reactor for the continuous flow synthesis of amides.

A simple and efficient solvent-free protocol for continuous flow synthesis of amides at room temperature is developed using easily available starting materials. N-(3-Dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride (EDC.HCl) was used as the reagent for the formation of an amide bond without using any metal catalyst or additives. A jacketed screw reactor when operated over a residence time of 30 300 s helped achieve almost complete conversion. This approach is extended for the synthesis of 36 derivatives and 2 bioactive molecules using different substrates having different aliphatic mono and di-acids as well as aromatic acids, including aromatic hetero-acid compounds and phenyl hydrazine. The target amide was scaled up to 100 g with an average 90% yield.

Size-controlled flow synthesis of gold nanoparticles using a segmented flow microfluidic platform.

Segmented flow is often used in the synthesis of nanomaterials to achieve narrow particle size distribution. The narrowness of the distribution is commonly attributed to the reduced dispersion associated with segmented flows. On the basis of the analysis of flow fields and the resulting particle size distribution, we demonstrate that it is the slip velocity between the two fluids and internal mixing in the continuous-phase slugs that govern the nature of the particle size distribution. The reduction in the axial dispersion has less impact on particle growth and hence on the particle size distribution. Synthesis of gold nanoparticles from HAuCl(4) with rapid reduction by NaBH(4) serves as a model system. Rapid reduction yields gold nuclei, which grow by agglomeration, and it is controlled by the interaction of the nuclei with local flow. Thus, the difference in the physical properties of the two phases and the inlet flow rates ultimately control the particle growth. Hence, a careful choice of continuous and dispersed phases is necessary to control the nanoparticle size and size distribution.

4,7-Dichloro-quinoline.

The two mol-ecules in the asymmetric unit of the title compound, C(9)H(5)Cl(2)N, are both essentially planar (r.m.s. deviations for all non-H atoms = 0.014 and 0.026 Å). There are no close C-H⋯Cl contacts.

7-Chloro-4-(piperazin-1-yl)quinoline.

There are two mol-ecules in the asymmetric unit (Z' = 2) of the title compound, C(13)H(14)ClN(3), Each mol-ecule is linked by N-H⋯N hydrogen bonds to another of the same type in a chain in [110]. The crystal studied was a non-merohedral twin with components 0.622 (2) and 0.378 (2).

Mitral Annulus Disjunction and Arrhythmic Mitral Valve Prolapse: Emerging Role of Cardiac Magnetic Resonance Imaging in the Workup.

Mitral valve prolapse is a commonly described entity with a highly variable and benign course. However, it is associated with ventricular arrhythmias and sudden cardiac death in a small subset of patients. Recent studies have yielded insight into myocardial mechanics and the causation of ventricular arrhythmias in these groups of patients. Mitral annular disjunction (MAD) characterized by detachment of mitral annulus from left ventricular myocardium is associated with morphological and functional remodeling of the left ventricular myocardium. Resultant fibrosis acts as a substrate of ventricular arrhythmia and sudden cardiac death. We present two such cases of arrhythmic mitral valve prolapse associated with MAD. Cardiac magnetic resonance imaging provides excellent morphological information and also helps in the assessment of fibrosis.

Inkjet printing of silver nanowires on flexible surfaces and methodologies to improve the conductivity and stability of the printed patterns.

Silver nanowires (AgNWs) are known to be used for printing on rigid as well as flexible surfaces. Here we have developed a systematic approach for using AgNWs synthesized by the polyol method for printing on flexible surfaces using a simple inkjet printing method. Optimized ink formulation used in this work comprises a mixture of Ag NWs suspended in ethylene glycol directly taken after synthesis and isopropyl alcohol. Using such formulation saves time and loss of material while transferring to other solvents, which is the usual practice. The printed patterns demonstrate high conductivity and stability over many months, which can revolutionize the applications of functional nanomaterials in low-cost printed electronics. The importance of fragmentation of nanowires only to achieve specific aspect ratios, to facilitate easy jetting and to prevent clogging is demonstrated. Varied concentrations (10 mg mL-1 to 50 mg mL-1) of Ag NWs are used in ink formulations in order to print highly conductive patterns (resistance < 50 Ω sq-1) in a minimal number of passes. The same composition was also seen to facilitate simple and time-efficient nano-welding at room temperature, which improves the conductivity and stability of the printed patterns.

Aloe vera Compositions Used for Medicinal Applications: A Patent Review (2013-till 2020).

BACKGROUND: Aloe vera is a plant traditionally used for medicinal purposes. It is also used as a cosmetic. Aloe vera gel/extract/juice is used in hair care, moisturizing, cleansing, and thickening agent in formulations. Aloe vera gel is rarely used for burns, wounds, infections, and gastric diseases. OBJECTIVES: To study the patents filed recently and understand the trend in the application of Aloe vera for therapeutic purposes. METHODS: This patent review focuses on granted patents during the year 2013 to 2020. The patents were analyzed, and their therapeutic use was studied to assess the recent trends in Aloe vera formulations. RESULTS: Most of the patents studied in this article are based on skincare products. Out of those, the maximum patents are on moisturizing compositions. Most of the patents are found in US jurisdiction and a few in Europe and China. As there are certain restrictions on patenting inventions related to composition and natural products in various jurisdictions, patents are only found in a few jurisdictions. CONCLUSION: The trend of the use of Aloe vera is still towards cosmetic products. Also, Aloe vera is used in oral care composition, deodorant compositions, anti-inflammatory composition, vitamin compositions, antibiotic compositions, etc.

Isatin Hybrids and Their Pharmacological Investigations.

Hybridization is an important strategy to design molecules that can be effectively used to treat fatal diseases known to mankind. Molecular hybrids and their pharmacological investigations aided in discovering several potent isatin (Indole 2, 3 dione) derivatives with anti-HIV, antimalarial, antitubercular, antibacterial, and anticancer activities. Indole-2,3-dione and their derivatives have diverse pharmacological properties and have a prominent role in the discovery of new drugs. To understand the various approaches for designing new molecules based on isatin nucleus analysis of various pharmacophore hybrids, spacers/linkers between pharmacophores and isatin for hybridization and their biological activities are important. This review discusses the progress in developing isatin hybrids as biologically effective agents and their crucial aspects of design and structure-activity relationships.