Impact of the Si/Al ratio on the ethanol/water coadsorption on MFI zeolites revealed using original quantitative IR approaches.

Advanced IR vibrational spectroscopic techniques, e.g., using a coupled gravimetric-IR surface analyzer (AGIR) and a high-throughput in situ IR cell (Carroucell), have been used for the quantitative studies of the adsorption and coadsorption of ethanol and water on MFI zeolites with different Si/Al ratios. The AGIR coupling is a powerful tool for the accurate determination of the molar adsorption coefficients during coadsorption experiments since their evaluation is based on the measurement of the exact amount of adsorbed species. The use of the Carroucell set up allows characterizing all the samples simultaneously, strictly in the same gaseous and temperature environment. The molar absorption coefficients of pure adsorbed ethanol and water are determined: their values are constant whatever the Si/Al ratio of the MFI zeolites. Moreover, these coefficients are found to be identical in the case of the water-ethanol coadsorption experiments. Their use allows obtaining the exact quantity of each adsorbate specie in the binary system. At low partial pressures, the unary water adsorption experiments suggest that the amount of adsorbed water results mainly from the preferential adsorption on Brønsted acid sites in tetrameric clusters. In contrast, the adsorption of EtOH occurs on both silanol groups and Brønsted acid sites (BASs). The effect of the Si/Al ratio is only observed at relatively low partial pressures. The effect of the Si/Al ratio on the ethanol adsorption capacity is also investigated. This study directs the choice of an appropriate zeolite once it is used in membranes for drying ethanol.

Unlocking the Potential of Hidden Sites in Faujasite: New Insights in a Proton Transfer Mechanism.

Zeolite Y and its ultra-stabilized hierarchical derivative (USY) are the most widely used zeolite-based heterogeneous catalysts in oil refining, petrochemisty, and other chemicals manufacturing. After almost 60 years of academic and industrial research, their resilience is unique as no other catalyst displaced them from key processes such as FCC and hydrocracking. The present study highlights the key difference leading to the exceptional catalytic performance of USY versus the parent zeolite Y in a multi-technique study combining advanced spectroscopies (IR and solid-state NMR) and molecular modeling. The results highlight a hitherto unreported proton transfer involving inaccessible active sites in sodalite cages that contributes to the exceptional catalytic performance of USY.

Probing the Brønsted Acidity of the External Surface of Faujasite-Type Zeolites.

We outline two methodologies to selectively characterize the Brønsted acidity of the external surface of FAU-type zeolites by IR and NMR spectroscopy of adsorbed basic probe molecules. The challenge and goal are to develop reliable and quantitative IR and NMR methodologies to investigate the accessibility of acidic sites in the large pore FAU-type zeolite Y and its mesoporous derivatives often referred to as ultra-stable Y (USY). The accessibility of their Brønsted acid sites to probe molecules (n-alkylamines, n-alkylpyridines, n-alkylphosphine- and phenylphosphine-oxides) of different molecular sizes is quantitatively monitored either by IR or 31 P NMR spectroscopy. It is now possible, for the first time to quantitatively discriminate between the Brønsted acidity located in the microporosity and on the external surface of large pore zeolites. For instance, the number of external acid sites on a Y (LZY-64) zeolite represents 2 % of its total acid sites while that of a USY (CBV760) represents 4 % while the latter has a much lower framework Si/Al ratio.

Incorporation of clusters of titanium oxide in Beta zeolite structure by a new cold TiCl4-plasma process: physicochemical properties and photocatalytic activity.

A new post-synthetic approach, involving cold plasma treatment, was employed for the preparation of TiO2-Beta zeolite. Zeolite Beta nanoparticles were first subjected to plasma induced deposition of TiCly (with y≤ 3), which were further converted into TiOx (with x≤ 2) upon O2-plasma treatment. Different steps of the new elaborated plasma approach were monitored using in situ FTIR spectroscopy. D2O isotopic exchange was used in order to shed light on the formation of Si-O-Ti bonds induced by TiCl4-plasma followed by O2-plasma treatments. The obtained TiO2-Beta materials were studied by a set of complementary characterization techniques including FTIR, TEM, SEM-EDS, XRD, N2 sorption, NMR and UV-Vis. The silanol content and the acidic properties of TiO2-Beta composites were also studied. The elaborated materials were tested as photocatalysts for methanol photooxidation in the gas phase. TiO2-Beta presents a methanol photooxidation rate 8 times higher than a conventional P25-TiO2 catalyst under UV irradiation.

In situ infrared molecular detection using palladium-containing zeolite films.

In situ IR detection of carbon monoxide in the presence of hydrocarbons (methanol and pentane) using Pd-containing zeolite thin films is reported. The thin films are prepared by spin coating deposition of nanosized LTL and BEA type zeolites suspensions; the palladium clusters are introduced in the nanosized zeolites by ion exchange followed by γ radiolysis of the coating suspensions. The Pd-containing zeolite films with a thickness of 200 nm are exposed to a single gas (either CO or hydrocarbons) or gas mixtures in the presence of water (100 ppm), and the IR spectra are collected continuously at 25, 75, and 100 °C. The fast recognition of very low concentrations of CO (2-100 ppm) in the presence of highly concentrated vapors of methanol or pentane (400-4000 ppm) with the Pd-containing zeolite films is demonstrated. The detection of CO and hydrocarbons is instant, which is a function of the low thickness of the films, small size of the individual zeolite crystals, and regular size and high stability of the Pd clusters in the zeolite films. The heat of adsorption for all experiments is similar (15 kJ.mol(-1)), which is explained with weak interactions between the carbon monoxide and palladium clusters in the zeolite films at temperatures below 100 °C. The nanosized zeolites with homogeneously distributed Pd clusters deposited in thin films demonstrate high molecular recognition capacity toward low concentrations of carbon monoxide under real environmental conditions, i.e., in the presence of water and hydrocarbons.

Interzeolite conversion of a micronsized FAU to a nanosized CHA zeolite free of organic structure directing agent with a high CO2 capacity.

The interzeolite transformation of a micronsized FAU zeolite to a nanosized CHA zeolite via alkali treatment is presented. The impact of the selection of the FAU zeolite starting material on the properties of the produced CHA zeolite was analyzed by XRD, ICP, SEM, TEM, N2 and CO2 adsorption, and in situ FT-IR. The analysis showed that the choice of starting FAU zeolite had a large impact on the chemical composition, size, morphology, and porosity of the produced CHA zeolite. The as prepared CHA samples show high capacity toward CO2 (4.26 mmol g-1) and it was demonstrated that the chemisorbed vs. physisorbed CO2 was controlled by varying the amount of alkali cations in the CHA zeolite.

Uniform Generation of Sub-nanometer Silver Clusters in Zeolite Cages Exhibiting High Photocatalytic Activity under Visible Light.

Sub-nanometer silver clusters that exhibit discrete electronic structure with molecular-like properties are highly desirable in various technologies. However, the methods for their preparation suffer from limitations related with the reproducibility and particles uniformity and/or the possibility of the scale-up. Another critical drawback is that free sub-nanometer silver clusters tend to aggregate into larger particles. In this work, a new approach that successfully overcomes the above limitations is developed. It allows, for the first time, an ultrafast preparation of sub-nanometer silver particles with high abundance, uniformity (7 Å), and stability into the cages of nanosized zeolite crystals. The new method consists of UV excitation of a water suspension of nanozeolite containing photoactive vanadate clusters in the presence of ethanol (as an electron donor) and silver precursor. The characteristic features of sub-nanometer silver particles are presented, and the mechanism of their formation is discussed. Sub-nanometer Ag clusters exhibit exceptional photocatalytic activity and selectivity in the reforming of formic acid to H2 and CO2 under visible light.

High-Visible-Light Photoactivity of Plasma-Promoted Vanadium Clusters on Nanozeolites for Partial Photooxidation of Methanol.

Cold VCl3-plasma is employed for the preparation of highly dispersed vanadium oxide clusters on nanosized zeolite. Different types of zeolites, such as EMT, FAU (z.X), and Beta, are used. The activity of the prepared catalysts is studied in the selective photooxidation of methanol under polychromatic visible and UV irradiations. The physicochemical properties and catalytic performance of plasma-treated zeolite Beta (P-V2O5@Beta) catalyst is compared with zeolite Beta (V2O5@Beta) and amorphous silica (V2O5@SiO2) impregnated vanadium oxide catalysts. Pure V2O5 is used as a reference material. The set of catalytic data shows that plasma-prepared zeolite Beta based catalyst displays the highest activity. Complementary characterization techniques including XRD, N2-sorption, FTIR, ionic exchange, pyridine adsorption, Raman, NMR, TPR, and EDX-TEM are used to study the impact of the preparation approach on the physicochemical properties and catalytic performance of photocatalysts.