Side-chain-bulk effects on the molecular packing and photovoltaic performance of benzotrithiophene-benzooxadiazole conjugated copolymers.

Two alternating donor-acceptor conjugated polymers, PBTTBO-C13 C11 and PBTTBO-C13 C8 , comprising 5-alkylbenzo[1,2-b:3,4-b':5,6-d'']trithiophene (BTT) as the donor and 4,7-bis(4-dodecylthien-2-yl)benzo[1,2,5]oxadiazole (BO) as the acceptor, with different alkyl side-chain architectures on their BTT units are synthesized, and their bulk heterojunction photovoltaic properties when blended with the fullerene PC71 BM are characterized. Even a slight change in the length of the alkyl chain of the BTT units influences the steric bulk to such a degree that it substantially affects the molecular packing of the polymers and the performance of their photovoltaic devices. The bulkier side chains of the polymer PBTTBO-C13 C11 not only prevent its crystallization, but also suppress its light-absorption coefficient relative to that of PBTTBO-C13 C8 , as evidenced by X-ray diffraction and UV/Vis absorption studies, presumably because of weakened intermolecular interactions. Moreover, the polymer bearing bulkier side chains, PBTTBO-C13 C11 , is less miscible with PC71 BM than PBTTBO-C13 C8 , and this characteristic determines the morphology of their annealed blended films, as shown by TEM studies. The best efficiency is obtained with a device containing an annealed PBTTBO-C13 C8 /PC71 BM (1/2 w/w) active layer that was maintained at 120 °C for 10 min, which shows a power conversion efficiency of 6.2 %, an open-circuit voltage of 0.75 V, a short-circuit current density of 12.6 mA cm(-2) , and a fill factor of 66 %.

Symmetry and coplanarity of organic molecules affect their packing and photovoltaic properties in solution-processed solar cells.

In this study we synthesized three acceptor-donor-acceptor (A-D-A) organic molecules, TB3t-BT, TB3t-BTT, and TB3t-BDT, comprising 2,2'-bithiophene (BT), benzo[1,2-b:3,4-b':5,6-d″]trithiophene (BTT), and benzo[1,2-b;4,5-b']dithiophene (BDT) units, respectively, as central cores (donors), terthiophene (3t) as π-conjugated spacers, and thiobarbituric acid (TB) units as acceptors. These molecules display different degrees of coplanarity as evidenced by the differences in dihedral angles calculated from density functional theory. By using differential scanning calorimetry and X-ray diffractions for probing their crystallization characteristics and molecular packing in active layers, we found that the symmetry and coplanarity of molecules would significantly affect the melting/crystallization behavior and the formation of crystalline domains in the blend film with fullerene, PC61BM. TB3t-BT and TB3t-BDT, which each possess an inversion center and display high crystallinity in their pristine state, but they have different driving forces in crystallization, presumably because of different degrees of coplanarity. On the other hand, the asymmetrical TB3t-BTT behaved as an amorphous material even though it possesses a coplanar structure. Among our tested systems, the device comprising as-spun TB3t-BDT/PC61BM (6:4, w/w) active layer featured crystalline domains and displayed the highest power conversion efficiency (PCE) of 4.1%. In contrast, the as-spun TB3t-BT/PC61BM (6:4, w/w) active layer showed well-mixed morphology and with a device PCE of 0.2%; it increased to 3.9% after annealing the active layer at 150 °C for 15 min. As for TB3t-BTT, it required a higher content of fullerene in the TB3t-BTT/PC61BM (4:6, w/w) active layer to optimize its device PCE to 1.6%.