[Cross-sectional study on the use of masks among occupational groups with high-risk positions for overseas import and pollution transmission].

Objective: To investigate the wearing of masks and the knowledge of masks among high-risk positions for overseas import and pollution transmission. Methods: From May 14 to 17, 2022, a convenient sampling method was used to conduct an online survey among 963 workers in high-risk positions for overseas import and pollution transmission in Beijing. The behaviors of individual use and wearing masks, the distribution and supervision of the unit, the knowledge of personal mask protection and the subjective feelings of wearing masks were analyzed. The χ(2) test and logistic regression model were used to analyze the influencing factors of the correct selection of masks. Results: The majority of the workers in high-risk positions for overseas import and pollution transmission were male (86.0%, 828/963), age concentration in 18-44 years old (68.2%, 657/963), and the majority of them had college or bachelor degrees (49.4%, 476/963). 79.4%(765/963) of the workers chose the right type of masks, female, 45-59 years old and high school education or above were the risk factors for correct selection of masks (P <0.05). Workers had good behaviors such as wearing/removing masks, but only 10.5% (101/963) could correctly rank the protective effect of different masks. 98.4% (948/963) of the workers believed that their work units had provided masks to their employees, and 99.1% (954/963) and 98.2%(946/963) of them had organized training and supervision on the use of masks, respectively. 47.4%(456/963) of the workers were uncomfortable while wearing masks. Conclusion: The overall selection and use of masks among occupational groups in high-risk positions for overseas import and pollution transmission in China need to be further standardized. It is necessary to strengthen supervision and inspection on the use of masks among occupational groups, and take improvement measures to improve the comfort of wearing masks.

Clinical characteristics and outcome of patients over 60 years with Hodgkin lymphoma treated in Switzerland.

Hodgkin lymphoma (HL) in older patients appears to be a different disease compared with younger patients with historically lower survival rates. This is related to a variety of factors, including increased treatment-related toxicity, the presence of comorbidities, and biologic differences. In order to better assess the clinical characteristics, treatment strategies, and outcome of this particular population, we conducted a population-based, retrospective analysis including 269 patients with HL older than 60 years (median age 71 years, range 60-94), treated between 2000 and 2017 in 15 referral centers across Switzerland. Primary endpoints were overall survival (OS), progression-free survival (PFS), and cause-specific survival (CSS). The vast majority of patients were treated with curative intent, either with a combined modality approach (chemotherapy followed by radiation therapy) or with systemic therapy. At a median follow-up of 6.6 years (95% confidence interval [CI], 6.0-7.6), 5-year PFS was 52.2% (95% CI, 46.0-59.2), 5-year OS was 62.5% (95% CI, 56.4-69.2), and 5-year CSS was 85.1.8% (95% CI, 80.3-90.1) for the entire cohort. A significant difference in terms of CSS was observed for patients older than 71 years in comparison to patients aged 60-70 years (hazard ratio 2.6, 1.3-5.0, p = 0.005). Bleomycin-induced lung toxicity (BLT) was documented in 26 patients (17.7%) out of the 147 patients exposed to this compound and was more frequent in patients older than 71 years (15/60, 25%). Outcome of HL pts older than 71 years appeared to decrease substantially in comparison to the younger counterpart. Treatment-related toxicities appeared to be relevant, in particular, BLT. New, potentially less toxic strategies need to be investigated in prospective clinical trials in this particular frail population.

Use of dynamic contrast-enhanced MRI for the early assessment of outcome of CyberKnife stereotactic radiosurgery for patients with spinal metastases.

AIM: To explore the value of dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) for evaluating early outcomes of CyberKnife radiosurgery for spinal metastases. MATERIALS AND METHODS: Patients with spinal metastases who were treated with CyberKnife radiosurgery from July 2018 to December 2020 were enrolled. Conventional MRI and DCE-MRI were performed before treatment and at 3 months after treatment. Patients showing disease progression were defined as the progressive disease (PD) group and those showing complete response, partial response, and stable disease were defined as the non-PD group. The haemodynamic parameters (volume transfer constant [Ktrans], rate constant [Kep], and extravascular space [Ve]) before and after treatment between the groups were analysed. Area under the curve (AUC) values were calculated. RESULTS: A total of 27 patients with 39 independent spinal lesions were included. The median follow-up time was 18.6 months (6.2-36.4 months). There were 27 lesions in the non-PD group and 12 lesions in the PD group. Post-treatment Kep, ΔKtrans and ΔKep in the non-PD group (0.959/min, - 32.6% and -41.1%, respectively) were significantly lower than the corresponding values in PD group (1.429/min, 20.4% and -6%; p<0.05). Post-treatment Ve and ΔVe (0.223 and 27.8%, respectively) in the non-PD group were significantly higher than that of the PD group (0.165 and -13.5%, p<0.05). ΔKtrans showed the highest diagnostic efficiency, with an AUC of 0.821. CONCLUSIONS: DCE-MRI parameters change significantly at an early stage after CyberKnife stereotactic radiosurgery for spinal metastases. DCE-MRI may be of value in determining the early treatment response.

Age and traumatic brain injury as prognostic factors for late-phase mortality in patients defined as polytrauma according to the New Berlin Definition: experiences from a level I trauma center.

BACKGROUND: The rationale of this study was to identify independent prognostic factors influencing the late-phase survival of polytraumatized patients defined according to the New Berlin Definition. METHODS: Retrospective data analysis on 173 consecutively polytraumatized patients treated at a level I trauma center between January 2012 and December 2015. Patients were classified into two groups: severely injured patients (ISS > 16) and polytraumatized patients (patients who met the diagnostic criteria for the New Berlin Definition). RESULTS: Polytraumatized patients showed significantly lower late-phase and overall survival rates. The presence of traumatic brain injury (TBI) and age > 55 years had a significant influence on the late-phase survival in polytraumatized patients but not in severely injured patients. Despite the percentage of severe TBI being nearly identical in both groups, severe TBI was identified as main cause of death in polytraumatized patients. Furthermore, severe TBI remains the main cause of death in polytraumatized patients > 55 years of age, whereas younger polytraumatized patients (< 55 years of age) tend to die more often due to the acute trauma. CONCLUSION: Our results suggest that age beyond 55 years and concomitant (severe) TBI remain as most important influencing risk factor for the late-phase survival of polytraumatized patients but not in severely injured patients. LEVEL OF EVIDENCE: Prognostic study, level III.

Barriers and enablers in the implementation of a standardised process for nutrition care: findings from a multinational survey of dietetic professionals in 10 countries.

BACKGROUND: To explore the barriers and enablers experienced by nutrition and dietetic professionals in the implementation of the standardised Nutrition Care Process (NCP) across 10 different countries. NCP related beliefs, motivations and values were investigated and compared. METHODS: A validated online survey was disseminated to nutrition and dietetics professionals in 10 countries in the local language during 2017. Cross-sectional associations and differences between countries were explored for level of implementation, barriers/enablers and attitudes/motivation among the respondents. RESULTS: Higher NCP implementation was associated with greater occurrence of enabling aspects, as well as fewer occurrences of barriers. The most common enabler was 'recommendation by the national dietetic association' (69%) and the most common barrier was 'lack of time' (39%). A longer experience of NCP use was associated with a more positive attitude towards all NCP aspects. Differences between countries were identified, regarding both the occurrence of barriers/enablers and attitudes/motivations. CONCLUSIONS: Implementation efforts need to be tailored to country-specific contexts when implementing a new standard of care framework among nutrition and dietetic professionals. Additional research is needed to further assess the management and workplace strategies to support the development of nutrition and dietetics professionals in multidisciplinary healthcare organisations.

[CT spectral curve in differentiating spinal tumor metastasis and infections].

OBJECTIVE: To evaluate the value of CT spectral curve in differentiating spinal tumor metastasis (STM) from spinal infections (SI). METHODS: In the study, 29 STM and 18 SI patients proved pathologically and clinically were examined by dual energy spectral CT (DESCT). The monochromatic images and CT spectral curves were generated automatically by GSI Viewer software. The attenuation values at different energy levels (40-140 keV, every 10 keV), the attenuation values of the lesions on the conventional polychromatic CT images and the gradients of the curve were calculated and compared between STM and SI. RESULTS: The median age of STM and SI (58 years vs. 64 years) were not significantly different (U=171, P=0.4). The attenuation values of STM at 40-100 keV were 281.79 (143.67, 446.19) HU, 199.68 (100.04, 321.49) HU, 151.54 (81.47, 243.49) HU, (122.64±27.72) HU, (99.90±23.88) HU, (85.82±21.61) HU, and (75.94±20.27) HU, respectively, which were significantly higher than SI: 185.29 (164.19, 277.03) HU, 138.44 (124.98, 238.56) HU, 105.46 (92.94, 169.53) HU, (93.77±15.55) HU, (79.15±12.84) HU, (68.99±11.75) HU, and (62.22±11.71) HU (all P < 0.05). The attenuation values at 110-140 keV and the attenuation value on the conventional CT images were not significantly different between STM and SI. The gradient of CT spectral curve of STM was 2.43±0.58, which was higher than the value of 1.50±0.40 for SI (P < 0.001). Using 1.72 and 248.80 HU as the threshold value for CT spectral curve slope and the attenuation value at 40 keV, could obtain the area under receiver operating characteristic (ROC) curve of 0.905 and 0.892, sensitivity of 88.0% and 80.0%, and specificity of 76.9% and 92.3%. CONCLUSION: CT spectral curve provides valuable semi-quantitative information for the differential diagnosis of STM and SI, which can be used as a supplement to traditional CT imaging.

Immediate and delayed loading of fixed dental prostheses supported by single or two splinted implants: A histomorphometric study in dogs.

To evaluate presumptive differences in osseointegration at implants supporting crowns that are physiologically loaded either immediately or 3 months after installation. All premolars and first molars were extracted bilaterally in six dogs. After 3 months of healing, three implants were installed on the premolar region and two in the molar region in one side of the mandible. Likewise, after another 3 months, five implants were installed in the contralateral side, and impressions were taken bilaterally. Within 48 hours, two single crowns were screwed bilaterally onto two implants in the premolar region, and two splinted crowns reproducing the shape of the first molar were screwed bilaterally onto the implants in the molar region. The mesial implants were used as no-loaded controls. Sacrifices were performed after 3 months, and histological analyses were performed. At the premolar sites, mineralised bone-to-implant contact (MBIC%) was 78.0 ± 4.0% and 70.9 ± 7.9% at the delayed and immediately loaded sites, respectively. This difference was statistically significant. At the control implants, MBIC% was 61.4 ± 14.7% and 63.1 ± 13.1% at the delayed and the immediately loaded sites, respectively. At the molar sites, MBIC% was 79.2 ± 10.9% and 61.1 ± 10.3% at the delayed and immediately loaded sites, respectively. Applying a delayed loading to fixed dental prostheses supported by single or two splinted implants yielded higher proportions of bone-to-implant contact (osseointegration) compared to immediately loaded implants. Moreover, both types of loading protocols yielded a higher rate of osseointegration compared to unloaded implant sites after 3 months following implant installation.

[Analysis of acute occupational poisoning events in China during 2006-2016].

Objective: To analyze the epidemic characteristics of acute occupational poisoning events in order to state the regularity of outbreak and provide scientific evidences of prevention and control measure in China. Methods: According to the report information from the Management Information System of Public Health Emergency, we analyzed acute occupational poisoning events time distribution, regional distribution, toxicant variety, route of exposure and events detection from 2006 to 2016. Results: The total number of acute occupational poisoning events reported in 26 provinces of China from 2006 to 2016 was 337, causing 2 399 people poisoned, and the fatality rate was 18.09%. Majority of them were higher grade events and the top three provinces of acute occupational poisoning events were Shanghai, Anhui, Shandong. Inhalation is the main cause of poisoning. The acute occupational poisoning events for carrying out poison dectection were accounted for 56.68%. Conclusion: Acute occupational poisoning events in China is reducing year by year, But fatality rate is not decrease. So the country should increase the supervision and management of safety in production, strengthen the safety education of employees and coordination mechanism among different departments.

How to diagnose mould allergy? Comparison of skin prick tests with specific IgE results.

BACKGROUND: Diagnosis of mould allergy is complicated due to the heterogeneity of the test material and the decrease in the number of commercial mould skin test solutions that are currently available. OBJECTIVES: The aim of this study was to compare skin prick tests (SPT) from different manufacturers to one another and concurrently with sIgE tests for Aspergillus fumigatus (Asp f), Cladosporium herbarum (Cla h), Penicillium chrysogenum (Pen ch), Alternaria alternata (Alt a) and Aspergillus versicolor (Asp v) to ascertain a feasible diagnostic procedure for mould sensitization. METHODS: In this multi-centre study, 168 patients with mould exposure and/or mould-induced respiratory symptoms were included. Mould SPT solutions were analysed biochemically and tested in duplicate on patients' arms. Specific IgE (sIgE) concentrations to corresponding mould species and mould mix (mx1) were measured by ImmunoCAP. SPTs in accordance with one another and with sIgE were further considered. The test efficiency was calculated using receiver-operating characteristic (ROC) analysis. RESULTS: Mould sensitization was more frequently detected by the SPT (90 of 168) than by the sIgE tests (56 of 168). Concordances of double SPT positives were only sufficient (≥ 80%) for environmental allergens, two Asp f and three Alt a SPT solutions, whereas all other mould solutions revealed concordances < 80%. The antigen content of SPT solutions was positively associated with concordant SPT double values as well as with sIgE. Taking sIgE as the 'positive standard', all mould SPT solutions revealed test efficiencies > 80%, but varied up to 20% in sensitivity and positive predictive value with the exception of Alt a. CONCLUSIONS: SPT solutions are sensitive and essential diagnostic tools for the detection of mould sensitization. Our recommendation for diagnosis would be to test at least Alt a, Asp f and Pen ch using SPT and additional sIgE test to mx1.

Sensitive CH4 detection applying quantum cascade laser based optical feedback cavity-enhanced absorption spectroscopy.

We report on sensitive detection of atmospheric methane employing quantum cascade laser based optical feedback cavity-enhanced absorption spectroscopy (OF-CEAS). An instrument has been built utilizing a continuous-wave distributed feedback quantum cascade laser (cw-QCL) with a V-shaped cavity, a common arrangement that reduces feedback to the laser from non-resonant reflections. The spectrometer has a noise equivalent absorption coefficient of 3.6 × 10-9 cm-1 Hz-1/2 for a spectral scan of CH4 at 7.39 µm. From an Allan-Werle analysis a detection limit of 39 parts per trillion of CH4 at atmospheric pressure within 50 s acquisition time was found.

Strontium hydroxyapatite in situ gel-forming system - a new approach for minimally invasive bone augmentation.

OBJECTIVES: To achieve ideal functional and aesthetic requirements, ridge augmentation is often required before dental implant placement. Bone augmentation (especially vertical), which normally consists of complex and invasive surgeries, still remains challenge. This study seeks to investigate the feasibility of an injectable in situ gel-forming system containing strontium hydroxyapatite (SrHA) and alginate for minimally invasive bone augmentation in a rat calvarial model. MATERIAL AND METHODS: SrHA-alginate solution was prepared by mixing SrHA powder with alginate solution (20 mg/mL) to the final concentration of 0.5% (w/v). Each animal received a 200-µL single subperiosteal injection of either SrHA-alginate solution or alginate solution. The new bone formation was assessed at 0, 4, and 8 weeks histologically and radiologically. RESULTS: The SrHA-alginate solution materials could form solid gel once injected. As such, no sutures were required to close the injection site. Significantly greater amount of new bone formation was observed in the SrHA-alginate group compared with the alginate group both by micro-CT and by histological section. The newly formed bone in the SrHA-alginate group originated both from the underlying original bone and from the elevated periosteum. A 2.3-fold increase of the vertical bone height was observed in the SrHA-alginate group compared with 1.3-fold increase in the alginate group. CONCLUSIONS: Rat calvarial bone augmentation was achieved by a single subperiosteal injection of SrHA-alginate solution without any administration of stem cells or growth factors. The in situ gel-forming material may hold potential therapeutic benefits for local bone augmentation in a minimally invasive manner.

Novel bioresorbable strontium hydroxyapatite membrane for guided bone regeneration.

OBJECTIVES: Membrane materials have been widely used for guided bone regeneration (GBR). However, due to bio-functional limitation of the current membranes, the ideal resorbable membrane that can stimulate bone regeneration has yet to be developed. This study seeks to investigate the effects of a strontium hydroxyapatite (SrHA)-containing membrane for GBR. MATERIAL AND METHODS: Strontium hydroxyapatite powder was synthesized and mixed with gelatin solution to the final concentration of 10 mg/ml (Sr10) and 20 mg/ml (Sr20). Approximately 100-µm-thick membranes were fabricated, and the mechanical properties and strontium ion release pattern were analyzed. Rat bone marrow stromal cell (BMSC) responses were investigated in vitro. Bilaterial rat calvarial defects were used in vivo to compare the SrHA membranes against commercially available collagen membranes and evaluated radiologically and histologically. RESULTS: Strontium hydroxyapatite membranes exhibited higher elasticity and strength than the collagen membrane, and slow strontium ion release was also confirmed. No BMSC cytotoxicity was found on the SrHA membranes, and the alkaline phosphatase positively stained area was significantly greater than the collagen membrane at earlier time point. At 4 weeks, both micro-CT and histological analyses revealed that the Sr20 group yielded significantly greater bone formation. CONCLUSIONS: The SrHA-containing membrane developed in this study was found to be a biocompatible material that can stimulate BMSC differentiation as well as bone regeneration and maturation in rat calvarial defects at early time point compared with collagen membrane. The best result was observed in Sr20 group, which can be potentially effective for GBR.

[Doctor, I'm hot! Managing the effects of menopause in patients with breast cancer]. / Docteur, j'ai chaud! Gestion des effets de la menopause chez les patientes atteintes d'un cancer du sein.

The incidence of breast cancer is rising up, but the mortality rate is decreasing, leading to a growing number of survivors. Most of these women are postmenopausal at diagnosis or will reach menopause following anti-cancer treatments. Most of them have hormone-sensitive tumors and will receive an anti-hormonal treatment. Endocrine therapy is associated with many adverse effects, including a worsening of climacteric symptoms with a negative impact on quality of life and therefore a suboptimal therapeutic adherence. Some supportive therapies can alleviate these adverse effects and should be offered to patients.

Altered white-matter architecture in treatment-naive adolescents with clinical depression.

BACKGROUND: Depressive disorders are highly prevalent in adolescence and confer a heightened risk of recurrence in adulthood. Insight into the developmental neurocircuitry of depression could advance our understanding of depression and aid the development of effective treatment strategies. Whereas white-matter (WM) abnormalities are strongly implicated in adult depression, we still lack a firm understanding of WM architecture in adolescent depression. Using diffusion tensor imaging (DTI), we set out to investigate WM microstructure in a sample of clinically depressed adolescents relative to matched controls. METHOD: We employed tract-based spatial statistics (TBSS) to examine WM microstructure in 25 treatment-naive adolescents with clinical depression relative to 21 matched controls. Using TBSS, we examined fractional anisotropy (FA), axial diffusivity (AD), radial diffusivity (RD) and mean diffusivity (MD). Threshold-free cluster enhancement (TFCE) with family-wise error (FWE) correction was used to control for multiple comparisons. RESULTS: Our analysis revealed abnormal WM microstructure in clinically depressed adolescents. More specifically, whole-brain analysis revealed that patients had lower FA values in the body of the corpus callosum (CC), coupled with elevated RD and MD, and preserved AD. Conversely, region-of-interest analysis revealed that patients had higher FA values in the uncinate fasciculus (UF), coupled with elevated AD, reduced RD and preserved MD. CONCLUSIONS: In line with neurocircuitry models of depression, our findings suggest that WM abnormalities within pathways facilitating cognitive and emotional functioning are involved in the pathophysiology of depression. Importantly, our findings show that these WM abnormalities are already present early in the course of the disorder.

Developing implant dentistry education in Europe: the continuum from undergraduate to postgraduate education and continuing professional development.

INTRODUCTION: Implant dentistry is a treatment modality which has mainstream clinical practice of comprehensive care, which however is not adequately represented in the undergraduate dental curricula. A consensus workshop organised by ADEE in 2008, set the benchmarks for the knowledge and competences a modern dental practitioner must possess with regard to implant dentistry, as well as defined undergraduate and postgraduate pathways for the acquisition of these competences. Today, 5 years later, there exist several challenges for the implementation of these benchmarks in both undergraduate curricula but also post-graduation educational pathways. METHODS: A consensus workshop was organised by ADEE, bringing together 48 opinion leaders, including academic teachers of all disciplines related to implant dentistry, specialists, representatives of relevant scientific and professional associations, as well as industry delegates. The objectives of the workshop were to evaluate the existing scientific literature, reported experience and best practices in order to identify potential and limitations for the implementation of implant dentistry in the undergraduate curriculum, as well produce recommendations for the optimal educational structures for postgraduate programmes and continuing professional development. RESULTS: The scientific committee conducted two European-wide questionnaire surveys to better document the current state of education in implant dentistry. Upon completion of the surveys, reviewers were appointed to produce three scientific review papers, identifying current achievements and future challenges. Finally, during the 3 days of the workshop, all the evidence was reviewed and the main conclusions and recommendations that were adopted by all participants are reported in the present Consensus Paper. CONCLUSIONS: Implementation of implant dentistry in the undergraduate curriculum has improved significantly, but still lags behind the benchmarks set in 2008 and the diversity between institutions remains big. At the post-graduation level, there is currently a wide diversity of courses and pathways towards competences related to implant dentistry and there is at present a great need for quality assurance, as well as standardisation and transparency of the learning outcomes.

Effects of root surface debridement using Er:YAG laser versus ultrasonic scaling - a SEM study.

OBJECTIVE: Despite promising results of Er:YAG laser in periodontal debridement, to date there is no consensus about the ideal settings for clinical use. This experimental clinical trial aimed to determine the effects of debridement using Er:YAG laser and to compare with ultrasonic treatment. MATERIALS AND METHODS: Sixty-four teeth were divided into two in vivo and in vitro subgroups. Each tooth received ultrasonic treatment on one side and Er:YAG laser debridement at either 60, 100, 160 or 250 mJ pulse(-1) and at 10 Hz on the other side on a random basis. All samples were morphologically analyzed afterwards under scanning electron microscope for surface changes and dentinal tubules exposure. Treatment duration (d) was also recorded. RESULTS: Laser debridement produced an irregular, rough and flaky surface free of carbonization or meltdown while ultrasound produced a relatively smoother surface. The number of exposed dentinal tubules (n) followed an energy-dependent trend. The number of exposed tubules among the in vivo laser groups was n 60 mJ = n 100 mJ < n 160 mJ < n 250 mJ (P < 0.001). Also 160 and 250 mJ lasers led to significantly more dentinal exposure than ultrasound under in vivo condition. Within the in vitro laser groups, dentinal tubules exposure was n 60 mJ < n 100 mJ < n 160 mJ < n 250 mJ (P ≤ 0.0015). Furthermore, in vitro laser treatments at 100, 160 and 250 mJ led to significantly more dentinal denudation than ultrasound. Treatment duration (d) for the in vivo groups was d 60 mJ > d 100 mJ > d Ultrasound = d 160 mJ > d 250 mJ (P ≤ 0.046), while for the in vitro groups it was d 60 mJ > d 100 mJ = d Ultrasound = d 160 mJ >d 250 mJ (P ≤ 0.046). CONCLUSIONS: Due to excessive treatment duration and surface damage, Er:YAG laser debridement at 60 and 250 mJ pulse(-1), respectively, is not appropriate for clinical use. Although laser debridement at 100 and 160 mJ pulse(-1) seems more suitable for clinical application, compared to ultrasound the former is more time-consuming and the latter is more aggressive. Using a feedback device or lower pulse energies are recommended when using laser in closed field.

Predicting the response to neoadjuvant chemoradiation for rectal cancer using nomograms based on MRI tumour regression grade.

PURPOSE: This study aimed to develop nomograms that combine clinical factors and MRI tumour regression grade to predict the pathological response of mid-low locally advanced rectal cancer to neoadjuvant chemoradiotherapy. METHODS: The retrospective study included 204 patients who underwent neoadjuvant chemoradiotherapy and surgery between January 2013 and December 2021. Based on pathological tumour regression grade, patients were categorized into four groups: complete pathological response (pCR, n=45), non-complete pathological response (non-pCR; n=159), good pathological response (pGR, n=119), and non-good pathological response (non-pGR, n=85). The patients were divided into a training set and a validation set in a 7:3 ratio. Based on the results of univariate and multivariate analyses in the training set, two nomograms were respectively constructed to predict complete and good pathological responses. Subsequently, these predictive models underwent validation in the independent validation set. The prognostic performances of the models were evaluated using the area under the curve (AUC). RESULTS: The nomogram predicting complete pathological response incorporates tumour length, post-treatment mesorectal fascia involvement, white blood cell count, and MRI tumour regression grade. It yielded an AUC of 0.787 in the training set and 0.716 in the validation set, surpassing the performance of the model relying solely on MRI tumour regression grade (AUCs of 0.649 and 0.530, respectively). Similarly, the nomogram predicting good pathological response includes the distance of the tumour's lower border from the anal verge, post-treatment mesorectal fascia involvement, platelet/lymphocyte ratio, and MRI tumour regression grade. It achieved an AUC of 0.754 in the training set and 0.719 in the validation set, outperforming the model using MRI tumour regression grade alone (AUCs of 0.629 and 0.638, respectively). CONCLUSIONS: Nomograms combining MRI tumour regression grade with clinical factors may be useful for predicting pathological response of mid-low locally advanced rectal cancer to neoadjuvant chemoradiotherapy. The proposed models could be applied in clinical practice after validation in large samples.

Evaluation of commercial skin prick test solutions for selected occupational allergens.

BACKGROUND: Skin prick testing (SPT) is an important step in the diagnosis of IgE-mediated occupational allergic diseases. The outcome of SPT is related to the quality of allergen extracts. Thus, the aim of the study was to assess different commercially available SPT solutions for selected occupational allergens. METHODS: SPT was performed in 116 bakers, 47 farmers and 33 subjects exposed to natural rubber latex (NRL), all with work-related allergic symptoms. The SPT solutions from different manufacturers (n = 3-5) for wheat flour, rye flour, soy, cow hair/dander, storage mites (Tyrophagus putrescentiae, Lepidoglyphus destructor, Acarus siro) and NRL were analysed with respect to their protein and antigen contents. SPT was carried out in 16 allergy centres in six European countries using standardized procedures. Specific IgE values were used as the gold standard to calculate the sensitivity and specificity of SPT solutions. The optimal cut-point for each SPT solution was determined by Youden Index. RESULTS: Protein and antigen contents and patterns of the SPT solutions varied remarkably depending on the manufacturer. While SPT solutions for wheat flour and soy reached overall low sensitivities, sensitivities of other tested SPT solutions depended on the manufacturer. As a rule, solutions with higher protein and antigen content showed higher sensitivities and test efficiencies. CONCLUSIONS: There is a wide variability of SPT solutions for occupational allergens, and the sensitivity of several solutions is low. Thus, improvement and standardization of SPT solutions for occupational allergens is essential.

Outbreak investigation and case-control study: penta-resistant Salmonella Typhimurium DT104 associated with biltong in London in 2008.

In August 2008 an outbreak of Salmonella Typhimurium DT104 occurred in South West London. Sixteen cases were identified with a particular multilocus variable number tandem repeat analysis (MLVA) pattern. In a matched case-control study 14 primary cases were included. These were defined as individuals with gastrointestinal symptoms and Salmonella Typhimurium DT104 isolated from a stool specimen, with a characteristic antibiotic resistance profile and MLVA pattern, and diagnosed in a local laboratory. Four controls per case were matched on age, gender and area of residence. Cases were 26 times more likely than controls to have eaten beef biltong, a South African speciality meat product (odds ratio 25·83, 95% confidence interval 4·92­135·59, P < 0·01). Although environmental investigation failed to identify Salmonella in the food product we conclude that beef biltong consumption led to this outbreak. This conclusion has importance in informing the ongoing risk assessment relating to uncontrolled foodstuffs.