Dynamic Scaling and Island Growth Kinetics in Pulsed Laser Deposition of SrTiO_{3}.

We use real-time diffuse surface x-ray diffraction to probe the evolution of island size distributions and its effects on surface smoothing in pulsed laser deposition (PLD) of SrTiO_{3}. We show that the island size evolution obeys dynamic scaling and two distinct regimes of island growth kinetics. Our data show that PLD film growth can persist without roughening despite thermally driven Ostwald ripening, the main mechanism for surface smoothing, being shut down. The absence of roughening is concomitant with decreasing island density, contradicting the prevailing view that increasing island density is the key to surface smoothing in PLD. We also report a previously unobserved crossover from diffusion-limited to attachment-limited island growth that reveals the influence of nonequilibrium atomic level surface transport processes on the growth modes in PLD. We show by direct measurements that attachment-limited island growth is the dominant process in PLD that creates step flowlike behavior or quasistep flow as PLD "self-organizes" local step flow on a length scale consistent with the substrate temperature and PLD parameters.

Differential-aperture X-ray structural microscopy: a submicron-resolution three-dimensional probe of local microstructure and strain.

A recently developed differential-aperture X-ray microscopy (DAXM) technique provides local structure and crystallographic orientation with submicron spatial resolution in three-dimensions; it further provides angular precision of approximately 0.01 degrees and local elastic strain with an accuracy of approximately 1.0 x 10(-4) using microbeams from high brilliance third generation synchrotron X-ray sources. DAXM is a powerful tool for inter- and intra-granular studies of lattice distortions and lattice rotations on mesoscopic length scales of tenths of microns to hundreds of microns that are largely above the range of traditional electron microscopy probes. Nondestructive, point-to-point, spatially resolved measurements of local lattice orientations in bulk materials provide direct information on geometrically necessary dislocation density distributions through measurements of the lattice curvature in plastically deformed materials. This paper reviews the DAXM measurement technique and discusses recent demonstrations of DAXM capabilities for measurements of microtexture, local elastic strain, and plastic deformation microstructure.

Nonresonant inelastic x-ray scattering and energy-resolved Wannier function investigation of d-d excitations in NiO and CoO.

Nonresonant inelastic x-ray scattering measurements on NiO and CoO show that strong dipole-forbidden d-d excitations appear within the Mott gap at large wave vectors. These dominant excitations are highly anisotropic, and have [001] nodal directions for NiO. Theoretical analyses based on a novel, energy-resolved Wannier function (within the local density approximation+Hubbard U) show that the anisotropy reflects the local exciton wave functions and local point-group symmetry. The sensitivity to weak symmetry breaking in particle-hole wave functions suggests a wide application to strongly correlated systems.

Nonequilibrium interlayer transport in pulsed laser deposition.

We use time-resolved surface x-ray diffraction measurements with microsecond range resolution to study the growth kinetics of pulsed laser deposited . Time-dependent surface coverages corresponding to single laser shots were determined directly from crystal truncation rod intensity transients. Analysis of surface coverage evolution shows that extremely fast nonequilibrium interlayer transport, which occurs concurrently with the arrival of the laser plume, dominates the deposition process. A much smaller fraction of material, which is governed by the dwell time between successive laser shots, is transferred by slow, thermally driven interlayer transport processes.

Polychromatic X-ray microdiffraction studies of mesoscale structure and dynamics.

Polychromatic X-ray microdiffraction is an emerging tool for studying mesoscale structure and dynamics. Crystalline phase, orientation (texture), elastic and plastic strain can be nondestructively mapped in three dimensions with good spatial and angular resolution. Local crystallographic orientation can be determined to approximately 0.01 degree and elastic strain tensor elements can be measured with a resolution of approximately 10(-4) or better. Complete strain tensor information can be obtained by augmenting polychromatic microdiffraction with a monochromatic measurement of one Laue-reflection energy. With differential-aperture depth profiling, volumes tens to hundreds of micrometers below the surface are accessible so that three-dimensional distributions of crystalline morphology including grain boundaries, triple points, second phases and inclusions can all be mapped. Volume elements below 0.25 microm3 are routinely resolved so that the grain boundary structure of most materials can be characterized. Here the theory, instrumentation and application of polychromatic microdiffraction are described.

Quantitated trauma following radial keratotomy in rabbits.

Radial keratotomy was performed in 33 rabbits using an eight-incision technique. At various postoperative intervals up to 90 days, these eyes were enucleated and subjected to increasing quantitated trauma until ocular rupture occurred. Control animals (13 eyes) were subjected to similar trauma. The eyes that had surgery required approximately 50% of the control energy to rupture over the 90-day period (P less than 0.001). Corneal microperforations at surgery greatly increased the trauma risk (P = 0.02). Consistent rupture patterns resulted, both grossly and microscopically.

Three-dimensional X-ray structural microscopy with submicrometre resolution.

Advanced materials and processing techniques are based largely on the generation and control of non-homogeneous microstructures, such as precipitates and grain boundaries. X-ray tomography can provide three-dimensional density and chemical distributions of such structures with submicrometre resolution; structural methods exist that give submicrometre resolution in two dimensions; and techniques are available for obtaining grain-centroid positions and grain-average strains in three dimensions. But non-destructive point-to-point three-dimensional structural probes have not hitherto been available for investigations at the critical mesoscopic length scales (tenths to hundreds of micrometres). As a result, investigations of three-dimensional mesoscale phenomena--such as grain growth, deformation, crumpling and strain-gradient effects--rely increasingly on computation and modelling without direct experimental input. Here we describe a three-dimensional X-ray microscopy technique that uses polychromatic synchrotron X-ray microbeams to probe local crystal structure, orientation and strain tensors with submicrometre spatial resolution. We demonstrate the utility of this approach with micrometre-resolution three-dimensional measurements of grain orientations and sizes in polycrystalline aluminium, and with micrometre depth-resolved measurements of elastic strain tensors in cylindrically bent silicon. This technique is applicable to single-crystal, polycrystalline, composite and functionally graded materials.