Flagellar beating forces of human spermatozoa with different motility behaviors.

BACKGROUND: One of the causes of male infertility is associated with altered spermatozoa motility. These sperm features are frequently analyzed by image-based approaches, which, despite allowing the acquisition of crucial parameters to assess sperm motility, they are unable to provide details regarding the flagellar beating forces, which have been neglected until now. RESULTS: In this work we exploit Fluidic Force Microscopy to investigate and quantify the forces associated with the flagellar beating frequencies of human spermatozoa. The analysis is performed on two groups divided according to the progressive motility of semen samples, as identified by standard clinical protocols. In the first group, 100% of the spermatozoa swim linearly (100% progressive motility), while, in the other, spermatozoa show both linear and circular motility (identified as 80 - 20% progressive motility). Significant differences in flagellar beating forces between spermatozoa from semen sample with different progressive motility are observed. Particularly, linear motile spermatozoa exhibit forces higher than those with a circular movement. CONCLUSIONS: This research can increase our understanding of sperm motility and the role of mechanics in fertilization, which could help us unveil some of the causes of idiopathic male infertility.

Defective Biomechanics and Pharmacological Rescue of Human Cardiomyocytes with Filamin C Truncations.

Actin-binding filamin C (FLNC) is expressed in cardiomyocytes, where it localizes to Z-discs, sarcolemma, and intercalated discs. Although FLNC truncation variants (FLNCtv) are an established cause of arrhythmias and heart failure, changes in biomechanical properties of cardiomyocytes are mostly unknown. Thus, we investigated the mechanical properties of human-induced pluripotent stem cells-derived cardiomyocytes (hiPSC-CMs) carrying FLNCtv. CRISPR/Cas9 genome-edited homozygous FLNCKO-/- hiPSC-CMs and heterozygous knock-out FLNCKO+/- hiPSC-CMs were analyzed and compared to wild-type FLNC (FLNCWT) hiPSC-CMs. Atomic force microscopy (AFM) was used to perform micro-indentation to evaluate passive and dynamic mechanical properties. A qualitative analysis of the beating traces showed gene dosage-dependent-manner "irregular" peak profiles in FLNCKO+/- and FLNCKO-/- hiPSC-CMs. Two Young's moduli were calculated: E1, reflecting the compression of the plasma membrane and actin cortex, and E2, including the whole cell with a cytoskeleton and nucleus. Both E1 and E2 showed decreased stiffness in mutant FLNCKO+/- and FLNCKO-/- iPSC-CMs compared to that in FLNCWT. The cell adhesion force and work of adhesion were assessed using the retraction curve of the SCFS. Mutant FLNC iPSC-CMs showed gene dosage-dependent decreases in the work of adhesion and adhesion forces from the heterozygous FLNCKO+/- to the FLNCKO-/- model compared to FLNCWT, suggesting damaged cytoskeleton and membrane structures. Finally, we investigated the effect of crenolanib on the mechanical properties of hiPSC-CMs. Crenolanib is an inhibitor of the Platelet-Derived Growth Factor Receptor α (PDGFRA) pathway which is upregulated in FLNCtv hiPSC-CMs. Crenolanib was able to partially rescue the stiffness of FLNCKO-/- hiPSC-CMs compared to control, supporting its potential therapeutic role.

Nanomechanical Characterization of Ovarian Cancer Cell Lines as a Marker of Response to 2c Treatment.

Epithelial ovarian cancers (EOCs) are a heterogeneous group of tumors with different molecular and clinical features. In past decades, few improvements have been achieved in terms of EOC management and treatment efficacy, such that the 5-year survival rate of patients remained almost unchanged. A better characterization of EOCs' heterogeneity is needed to identify cancer vulnerabilities, stratify patients and adopt proper therapies. The mechanical features of malignant cells are emerging as new biomarkers of cancer invasiveness and drug resistance that can further improve our knowledge of EOC biology and allow the identification of new molecular targets. In this study, we determined the inter and intra-mechanical heterogeneity of eight ovarian cancer cell lines and their association with tumor invasiveness and resistance to an anti-tumoral drug with cytoskeleton depolymerization activity (2c).

Microfabricated cantilevers for parallelized cell-cell adhesion measurements.

Single-cell adhesion measured with atomic force microscopy (AFM) offers outstanding time and force resolution and allows the investigation of many important phenomena with unmatched precision. However, this technique suffers from serious practical limitations that hinder its effective application to a broader set of situations. Here we propose a different strategy based on the fabrication of large cantilevers and on the culture of the cells directly on them. Cantilevers are fabricated by standard micromachining, with an active area of 300 × 300 µm. A wedged structure is created so that the cantilever surface lies parallel to the substrate when mounted on an AFM system, so that the adhesion measurement probes the whole surface area at the same time. Thanks to the large area, cells can be seeded and grown on the cantilevers the day before the experiment, and let recover to optimal condition for the experiment. We used Human Embryonic Kidney cells, HEK 293A, to demonstrate the measurement of adhesion forces of up to 100 cells in parallel, and obtain a straightforward measurement of the average single cell adhesion energy. Our approach can improve significantly the cell-cell and cell-substrate adhesion statistics, reduce the experiment time and allow the investigation of the adhesion properties of cells that do not grow well in solution or on low adherent substrates, or that develop their characteristic features only after several hours or days of culture on a solid and adherent substrate.

The Role of Cytoskeleton Revealed by Quartz Crystal Microbalance and Digital Holographic Microscopy.

The connection between cytoskeleton alterations and diseases is well known and has stimulated research on cell mechanics, aiming to develop reliable biomarkers. In this study, we present results on rheological, adhesion, and morphological properties of primary rat cardiac fibroblasts, the cytoskeleton of which was altered by treatment with cytochalasin D (Cyt-D) and nocodazole (Noc), respectively. We used two complementary techniques: quartz crystal microbalance (QCM) and digital holographic microscopy (DHM). Qualitative data on cell viscoelasticity and adhesion changes at the cell-substrate near-interface layer were obtained with QCM, while DHM allowed the measurement of morphological changes due to the cytoskeletal alterations. A rapid effect of Cyt-D was observed, leading to a reduction in cell viscosity, loss of adhesion, and cell rounding, often followed by detachment from the surface. Noc treatment, instead, induced slower but continuous variations in the rheological behavior for four hours of treatment. The higher vibrational energy dissipation reflected the cell's ability to maintain a stable attachment to the substrate, while a cytoskeletal rearrangement occurs. In fact, along with the complete disaggregation of microtubules at prolonged drug exposure, a compensatory effect of actin polymerization emerged, with increased stress fiber formation.

Heart failure impairs the mechanotransduction properties of human cardiac pericytes.

The prominent impact that coronary microcirculation disease (CMD) exerts on heart failure symptoms and prognosis, even in the presence of macrovascular atherosclerosis, has been recently acknowledged. Experimental delivery of pericytes in non-revascularized myocardial infarction improves cardiac function by stimulating angiogenesis and myocardial perfusion. Aim of this work is to verify if pericytes (Pc) residing in ischemic failing human hearts display altered mechano-transduction properties and to assess which alterations of the mechano-sensing machinery are associated with the observed impaired response to mechanical cues. RESULTS: Microvascular rarefaction and defects of YAP/TAZ activation characterize failing human hearts. Although both donor (D-) and explanted (E-) heart derived cardiac Pc support angiogenesis, D-Pc exert this effect significantly better than E-Pc. The latter are characterized by reduced focal adhesion density, decreased activation of the focal adhesion kinase (FAK)/ Crk-associated substrate (CAS) pathway, low expression of caveolin-1, and defective transduction of extracellular stiffness into cytoskeletal stiffening, together with an impaired response to both fibronectin and lysophosphatidic acid. Importantly, Mitogen-activated protein kinase kinase inhibition restores YAP/TAZ nuclear translocation. CONCLUSION: Heart failure impairs Pc mechano-transduction properties, but this defect could be reversed pharmacologically.

Scanning Probe Microscopies: Imaging and Biomechanics in Reproductive Medicine Research.

Basic and translational research in reproductive medicine can provide new insights with the application of scanning probe microscopies, such as atomic force microscopy (AFM) and scanning near-field optical microscopy (SNOM). These microscopies, which provide images with spatial resolution well beyond the optical resolution limit, enable users to achieve detailed descriptions of cell topography, inner cellular structure organization, and arrangements of single or cluster membrane proteins. A peculiar characteristic of AFM operating in force spectroscopy mode is its inherent ability to measure the interaction forces between single proteins or cells, and to quantify the mechanical properties (i.e., elasticity, viscoelasticity, and viscosity) of cells and tissues. The knowledge of the cell ultrastructure, the macromolecule organization, the protein dynamics, the investigation of biological interaction forces, and the quantification of biomechanical features can be essential clues for identifying the molecular mechanisms that govern responses in living cells. This review highlights the main findings achieved by the use of AFM and SNOM in assisted reproductive research, such as the description of gamete morphology; the quantification of mechanical properties of gametes; the role of forces in embryo development; the significance of investigating single-molecule interaction forces; the characterization of disorders of the reproductive system; and the visualization of molecular organization. New perspectives of analysis opened up by applying these techniques and the translational impacts on reproductive medicine are discussed.

Study of the mechanical properties of fresh and cryopreserved individual human oocytes.

In assisted reproduction technologies, the cryopreservation of oocytes is a common procedure used to circumvent female infertility. However, some morphological and functional alterations of oocytes have been observed depending on the protocol applied. In this work, the mechanical response of individual human oocytes before and after a freeze-thawing procedure was characterised. Oocytes, immediately after retrieval, were morphologically evaluated by bright-field optical microscopy and their elasticity measured by indentation measurements using atomic force microscopy. Oocytes were then frozen according to the open-vitrification protocol and stored in liquid nitrogen. Afterwards, the same oocytes were thawed and the indentation measurements repeated. Using this approach, we can follow the elasticity of a set of single oocytes from retrieval up to the freeze-thawing procedure. The analysis of the resulting data shows that the retrieved healthy oocytes, which preserve their healthy morphological features after cryopreservation, maintain unchanged also in stiffness values. In contrast, oocytes having dysmorphic characteristics, before and/or after freeze-thawing, show significant variations in their mechanical response. In addition, the dysmorphic oocytes are generally observed to be softer than the healthy oocytes. Our results indicate that stiffness of healthy oocytes is not considerably affected by the open-vitrification-thawing procedure, and that distinct elasticity ranges can be identified for healthy and dysmorphic oocytes. These findings indicate that the mechanical characterization of oocytes represents an opportunity to detect cellular defects, and assess the quality and bio-viability of processes such as cryopreservation.

The phototransduction machinery in the rod outer segment has a strong efficacy gradient.

Rod photoreceptors consist of an outer segment (OS) and an inner segment. Inside the OS a biochemical machinery transforms the rhodopsin photoisomerization into electrical signal. This machinery has been treated as and is thought to be homogenous with marginal inhomogeneities. To verify this assumption, we developed a methodology based on special tapered optical fibers (TOFs) to deliver highly localized light stimulations. By using these TOFs, specific regions of the rod OS could be stimulated with spots of light highly confined in space. As the TOF is moved from the OS base toward its tip, the amplitude of saturating and single photon responses decreases, demonstrating that the efficacy of the transduction machinery is not uniform and is 5-10 times higher at the base than at the tip. This gradient of efficacy of the transduction machinery is attributed to a progressive depletion of the phosphodiesterase along the rod OS. Moreover we demonstrate that, using restricted spots of light, the duration of the photoresponse along the OS does not increase linearly with the light intensity as with diffuse light.

Combined use of AFM and soft X-ray microscopy to reveal fibres' internalization in mesothelial cells.

Nanotoxicology and nanomedicine investigations often require the probing of nano-objects such as fibres and particles in biological samples and cells, whilst internalization and intracellular destiny are the main issues for in vitro cellular studies. Various high resolution microscopy techniques are well suited for providing this highly sought-after information. However, sample preparation, nanomaterial composition and sectioning challenges make it often difficult to establish whether the fibres or particles have been internalized or they are simply overlaying or underlying the biological matter. In this paper we suggest a novel suitable combination of two different microscopic techniques to reveal in intact cells the uptake of asbestos fibres by mesothelial cells. After exposure to asbestos fibres and fixation, cells were first analysed under the AFM instrument and then imaged under the TwinMic soft X-ray microscope at Elettra Sincrotrone. The suggested approach combines standard soft X-ray microscopy imaging and AFM microscopy, with a common non-invasive sample preparation protocol which drastically reduces the experimental uncertainty and provides a quick and definitive answer to the nanoparticle cellular and tissue uptake.

High aspect ratio silicon nanowires control fibroblast adhesion and cytoskeleton organization.

Cell-cell and cell-matrix interactions are essential to the survival and proliferation of most cells, and are responsible for triggering a wide range of biochemical pathways. More recently, the biomechanical role of those interactions was highlighted, showing, for instance, that adhesion forces are essential for cytoskeleton organization. Silicon nanowires (Si NWs) with their small size, high aspect ratio and anisotropic mechanical response represent a useful model to investigate the forces involved in the adhesion processes and their role in cellular development. In this work we explored and quantified, by single cell force spectroscopy (SCFS), the interaction of mouse embryonic fibroblasts with a flexible forest of Si NWs. We observed that the cell adhesion forces are comparable to those found on collagen and bare glass coverslip, analogously the membrane tether extraction forces are similar to that on collagen but stronger than that on bare flat glass. Cell survival did not depend significantly on the substrate, although a reduced proliferation after 36 h was observed. On the contrary both cell morphology and cytoskeleton organization revealed striking differences. The cell morphology on Si-NW was characterized by a large number of filopodia and a significant decrease of the cell mobility. The cytoskeleton organization was characterized by the absence of actin fibers, which were instead dominant on collagen and flat glass support. Such findings suggest that the mechanical properties of disordered Si NWs, and in particular their strong asymmetry, play a major role in the adhesion, morphology and cytoskeleton organization processes. Indeed, while adhesion measurements by SCFS provide out-of-plane forces values consistent with those measured on conventional substrates, weaker in-plane forces hinder proper cytoskeleton organization and migration processes.

A novel approach in the free-electron laser diagnosis based on a pixelated phosphor detector.

A new high-performance method for the free-electron laser (FEL) focused beam diagnosis has been successfully tested at the FERMI FEL in Trieste, Italy. The novel pixelated phosphor detector (PPD) consists of micrometric pixels produced by classical UV lithography and dry etching technique, fabricated on a silicon substrate, arranged in a hexagonal geometry and filled with suitable phosphors. It has been demonstrated that the overall resolution of the system has increased by reducing the diffusion of the light in the phosphors. Various types of PPD have been produced and tested, demonstrating a high resolution in the beam profile and the ability to measure the actual spot size shot-to-shot with an unprecedented resolution. For these reasons, the proposed detector could become a reference technique in the FEL diagnosis field.

Toward an integrated device for spatiotemporal superposition of free-electron lasers and laser pulses.

Free-electron lasers (FELs) currently represent a step forward on time-resolved investigations on any phase of matter through pump-probe methods involving FELs and laser beams. That class of experiments requires an accurate spatial and temporal superposition of pump and probe beams on the sample, which at present is still a critical procedure. More efficient approaches are demanded to quickly achieve the superposition and synchronization of the beams. Here, we present what we believe is a novel technique based on an integrated device allowing the simultaneous characterization and the fast spatial and temporal overlapping of the beams, reducing the alignment procedure from hours to minutes.

A DNA origami nanorobot controlled by nucleic acid hybridization.

A prototype for a DNA origami nanorobot is designed, produced, and tested. The cylindrical nanorobot (diameter of 14 nm and length of 48 nm) with a switchable flap, is able to respond to an external stimulus and reacts by a physical switch from a disarmed to an armed configuration able to deliver a cellular compatible message. In the tested design the robot weapon is a nucleic acid fully contained in the inner of the tube and linked to a single point of the internal face of the flap. Upon actuation the nanorobot moves the flap extracting the nucleic acid that assembles into a hemin/G-quadruplex horseradish peroxidase mimicking DNAzyme catalyzing a colorimetric reaction or chemiluminescence generation. The actuation switch is triggered by an external nucleic acid (target) that interacts with a complementary nucleic acid that is beard externally by the nanorobot (probe). Hybridization of probe and target produces a localized structural change that results in flap opening. The flap movement is studied on a two-dimensional prototype origami using Förster resonance energy transfer and is shown to be triggered by a variety of targets, including natural RNAs. The nanorobot has potential for in vivo biosensing and intelligent delivery of biological activators.

Investigations of cardiac fibrosis rheology by in vitro cardiac tissue modeling with 3D cellular spheroids.

Cardiac fibrosis refers to the abnormal accumulation of extracellular matrix within the cardiac muscle, leading to increased stiffness and impaired heart function. From a rheological standpoint, knowledge about myocardial behavior is still lacking, partially due to a lack of appropriate techniques to investigate the rheology of in vitro cardiac tissue models. 3D multicellular cardiac spheroids are powerful and versatile platforms for modeling healthy and fibrotic cardiac tissue in vitro and studying how their mechanical properties are modulated. In this study, cardiac spheroids were created by co-culturing neonatal rat ventricular cardiomyocytes and fibroblasts in definite ratios using the hanging-drop method. The rheological characterization of such models was performed by Atomic Force Microscopy-based stress-relaxation measurements on the whole spheroid. After strain application, a viscoelastic bi-exponential relaxation was observed, characterized by a fast relaxation time (τ1) followed by a slower one (τ2). In particular, spheroids with higher fibroblasts density showed reduction for both relaxation times comparing to control, with a more pronounced decrement of τ1 with respect to τ2. Such response was found compatible with the increased production of extracellular matrix within these spheroids, which recapitulates the main feature of the fibrosis pathophysiology. These results demonstrate how the rheological characteristics of cardiac tissue vary as a function of cellular composition and extracellular matrix, confirming the suitability of such system as an in vitro preclinical model of cardiac fibrosis.

Nanomechanics controls neuronal precursors adhesion and differentiation.

The ability to control the differentiation of stem cells into specific neuronal types has a tremendous potential for the treatment of neurodegenerative diseases. In vitro neuronal differentiation can be guided by the interplay of biochemical and biophysical cues. Different strategies to increase the differentiation yield have been proposed, focusing everything on substrate topography, or, alternatively on substrate stiffness. Both strategies demonstrated an improvement of the cellular response. However it was often impossible to separate the topographical and the mechanical contributions. Here we investigate the role of the mechanical properties of nanostructured substrates, aiming at understanding the ultimate parameters which govern the stem cell differentiation. To this purpose a set of different substrates with controlled stiffness and with or without nanopatterning are used for stem cell differentiation. Our results show that the neuronal differentiation yield depends mainly on the substrate mechanical properties while the geometry plays a minor role. In particular nanostructured and flat polydimethylsiloxane (PDMS) substrates with comparable stiffness show the same neuronal yield. The improvement in the differentiation yield obtained through surface nanopatterning in the submicrometer scale could be explained as a consequence of a substrate softening effect. Finally we investigate by single cell force spectroscopy the neuronal precursor adhesion on the substrate immediately after seeding, as a possible critical step governing the neuronal differentiation efficiency. We observed that neuronal precursor adhesion depends on substrate stiffness but not on surface structure, and in particular it is higher on softer substrates. Our results suggest that cell-substrate adhesion forces and mechanical response are the key parameters to be considered for substrate design in neuronal regenerative medicine.

Half-wet nanomechanical sensors for cellular dynamics investigations.

Testing devices based on cell tracking are particularly interesting as diagnostic tools in medicine for antibiotics susceptibility testing and in vitro chemotherapeutic screening. In this framework, the application of nanomechanical sensors has attracted much attention, although some crucial aspects such as the effects of the viscous damping, when operating in physiological conditions environment, still need to be properly solved. To address this problem, we have designed and fabricated a nanomechanical force sensor that operates at the interface between liquid and air. Our sensor consists of a silicon chip including a 500 µm wide Si3N4 suspended membrane where three rectangular silicon nitride cantilevers are defined by a lithographically etched gap. The cantilevers can be operated in air, fully immersed in a liquid environment and in half wetting condition, with one side in contact with the solution and the opposite one in air. The formation of a water meniscus in the gap prevents the leakage of medium to the opposite side, which remained dry and is used to reflect a laser to measure the cantilever deflection. This configuration enables to keep the cells in physiological environment while operating the sensor in dry conditions. The performance of the sensor has been applied to monitor the motion and measures the forces developed by migrating breast cancer cell. The functionalization of one side of the cantilever and the use of a purposely designed chamber of measurements enable the confinement of the cell only on one side of the cantilever. Our data demonstrate that this approach can distinguish the adhesion and contraction forces developed by different cell lines and may represents valuable tool for a fast and quantitative in-vitro screening of new chemotherapeutic drugs targeting cancer cell adhesion and motility.

Investigation on the change of spermatozoa flagellar beating forces before and after capacitation.

The swimming forces exerted by mammalian spermatozoa during the pathway to the ovary and during the interaction with the oocyte are thought to play a fundamental role in the fertilization of the egg. In particular, a process named capacitation is of key relevance for its success. Capacitation enables spermatozoa to undergo the acrosome reaction and to exhibit different motility called hyperactivation with a change in the sperm cell tail motion from symmetric to a more asymmetric beating, characterized by wider flagellar bending at lower frequencies. Despite several studies about the mechanism that underlies capacitation, no quantitative information is available about the forces associated with sperm motility. Sperm cell motility has been widely studied with digital imaging tools and video microscopy, but these methodologies cannot provide information about the forces exerted by spermatozoa during the motion and the contribution of every single frequency of flagellar beating to the sperm cell movement. For this purpose, fluidic force microscopy was used to trap single swimming spermatozoa allowing to evaluate these parameters. We observe significant differences between capacitated and non-capacitated spermatozoa in terms of force exerted and beating frequencies. The description of the dynamics of this process is of great interest in the field of reproductive medicine. Such information could be useful to clarify unknown causes of male infertility or for the development of novel methods to assess the quality of semen samples.

A revertible, autonomous, self-assembled DNA-origami nanoactuator.

A DNA-origami actuator capable of autonomous internal motion in accord to an external chemical signal was designed, built, operated and imaged. The functional DNA nanostructure consists of a disk connected to an external ring in two, diametrically opposite points. A single stranded DNA, named probe, was connected to two edges of the disk perpendicularly to the axis of constrain. In the presence of a hybridizing target molecule, the probe coiled into a double helix that stretched the inner disk forcing the edges to move toward each other. The addition of a third single stranded molecule that displaced the target from the probe restored the initial state of the origami. Operation, dimension and shape were carefully characterized by combining microscopy and fluorescence techniques.

Atomic force spectroscopy-based essay to evaluate oocyte postovulatory aging.

Postovulatory aging is a process occurring in the mature (MII) oocyte leading the unfertilized ones to apoptosis. The optimal time window of fertility for different mammalian species after oocytes maturation depends on its timeliness: the higher the time elapsed from the accomplishment of the MII stage, the lower are the chances of fertilization and of development of a viable embryo. In the in vitro fertilization, the selection of competent oocytes for intracytoplasmic sperm injection (ICSI) is mostly made by the visual inspection of the MII oocyte morphology, which does not allow to determine the oocyte postovulatory age. On the other hand, more specific tests usually involve some kind of staining, thus compromising the viability of the oocyte for reproductive purposes. Hence, the need of a noninvasive analysis of oocyte aging to improve the success rate of in vitro fertilization procedures. Here, we exploit atomic force microscopy to examine the evolution of the mechanical properties of mouse oocytes during in vitro postovulatory aging. Three hours before the occurrence of any visual morphological feature related to degradation, we observe a sudden change of the mechanical parameters: the elastic modulus doubles its initial value, while the viscosity decreases significantly. These mechanical variations are temporally correlated with the release of the cortical granules, investigated by fluorescence microscopy. Interestingly, the oocyte mechanics correlates as well with the yield of embryo formation, evaluated up to the blastocyst formation stage. These results demonstrate that minimally invasive mechanical measurements are very sensitive to the aging of the oocyte and can be used as a label-free method to detect the age of the postovulatory oocytes.