Insight into Facile Ion Diffusion in Resistive Switching Medium toward Low Operating Voltage Memory.

The rapid increase in data storage worldwide demands a substantial amount of energy consumption annually. Studies looking at low power consumption accompanied by high-performance memory are essential for next-generation memory. Here, Graphdiyne oxide (GDYO), characterized by facile resistive switching behavior, is systematically reported toward a low switching voltage memristor. The intrinsic large, homogeneous pore-size structure in GDYO facilitates ion diffusion processes, effectively suppressing the operating voltage. The theoretical approach highlights the remarkably low diffusion energy of the Ag ion (0.11 eV) and oxygen functional group (0.6 eV) within three layers of GDYO. The Ag/GDYO/Au memristor exhibits an ultralow operating voltage of 0.25 V with a GDYO thickness of 5 nm; meanwhile, the thicker GDYO of 29 nm presents multilevel memory with an ON/OFF ratio of up to 104. The findings shed light on memory resistive switching behavior, facilitating future improvements in GDYO-based devices toward opto-memristors, artificial synapses, and neuromorphic applications.

Recent Developments of Dual Single-Atom Catalysts for Nitrogen Reduction Reaction.

Ammonia is vital for fertilizer production, hydrogen storage, and alternative fuels. The conventional Haber-Bosch process for ammonia production is energy-intensive and environmentally harmful. Designing environmentally friendly and low-energy consumption strategies for electrocatalytic N2 reduction reaction (ENRR) in mild conditions is meaningful. Single-atom catalysts (SACs) have been studied extensively for NRR due to their high atomic utilization and unique electronic structure but are limited by their poor faradic efficiency and low ammonia formation yield. Dual single-atom catalysts (DSACs) have recently emerged as a promising solution for the effective activation of molecular N2 , providing diverse active sites and synergistic interactions between adjacent atoms. In this review, we summarize the latest advances in metal DSACs for electrochemical ENRR based on both theoretical calculations and experimental studies, including aspects such as their variety, coordination, support, N2 adsorption and activity mechanisms, the characterization of NRR and electrochemical cell Configuration. We also address challenges and prospects in this rapidly evolving field, providing a comprehensive overview of DSACs for ENRR.

One-Step Passivation of Both Sulfur Vacancies and SiO2 Interface Traps of MoS2 Device.

Transition metal dichalcogenides (TMDs) benefit electrical devices with spin-orbit coupling and valley- and topology-related properties. However, TMD-based devices suffer from traps arising from defect sites inside the channel and the gate oxide interface. Deactivating them requires independent treatments, because the origins are dissimilar. This study introduces a single treatment to passivate defects in a multilayer MoS2 FET. By applying back-gate bias, protons from an H-TFSI droplet are injected into the MoS2, penetrating deeply enough to reach the SiO2 gate oxide. The characterizations employing low-temperature transport and deep-level transient spectroscopy (DLTS) studies reveal that the trap density of S vacancies in MoS2 drops to the lowest detection level. The temperature-dependent mobility plot on the SiO2 substrate resembles that of the h-BN substrate, implying that dangling bonds in SiO2 are passivated. The carrier mobility on the SiO2 substrate is enhanced by approximately 2200% after the injection.

Patterns of Anterior Inferior Tibiofibular Ligament Avulsion Fracture Accompanied by Ankle Fracture.

The anterior inferior tibiofibular ligament (AITFL) avulsion fracture accompanying an ankle fracture can compromise ankle stability, necessitating accurate evaluation and a clear understanding of its pathophysiology.. The aim of this study was to investigate the association between AITFL avulsion fracture and Lauge-Hansen, Wagstaffe classification. A retro-prospective study was conducted at a university-affiliated tertiary care medical center. We selected 128 patients who underwent surgery at our institution between January 2013 and July 2017 and analyzed the association between AITFL avulsion fracture and the foot position. According to the modified Wagstaffe classification system, there were 39 cases of type II, followed by 9 cases of type III and 8 cases of type IV. Of the7 pronation-abduction fractures, 3 were AITFL avulsion fracture (43%), while of the 21 pronation-external rotation fractures, 9 were AITFL avulsion fracture (43%). Of the 95 supination-external rotation fractures, there were 56 cases (59%) of AITFL avulsion fractures. Of the pronation fractures, 0% were fibular avulsion fractures and 43% were tibial avulsion fractures. Of the supination fractures, 44% were fibular avulsion fractures and 16% were tibial avulsion fracture. The difference in the ratio of fibular to tibial avulsion fractures between pronation and supination fractures was significant (p < .001). These results suggest that tibial avulsion fractures of type IV in the modified Wagstaffe classification and pronation fractures occur due to collision with the anterolateral corners of the distal bone when the talus externally rotates. Moreover, in cases of pronation fractures, a new type of AITFL avulsion fracture has been observed.

Relationship between Structure and Performance of Atomic-Scale Electrocatalysts for Water Splitting.

Atomic-scale electrocatalysts greatly improve the performance and efficiency of water splitting but require special adjustments of the supporting structures for anchoring and dispersing metal single atoms. Here, the structural evolution of atomic-scale electrocatalysts for water splitting is reviewed based on different synthetic methods and structural properties that create different environments for electrocatalytic activity. The rate-determining step or intermediate state for hydrogen or oxygen evolution reactions is energetically stabilized by the coordination environment to the single-atom active site from the supporting material. In large-scale practical use, maximizing the loading amount of metal single atoms increases the efficiency of the electrocatalyst and reduces the economic cost. Dual-atom electrocatalysts with two different single-atom active sites react with an increased number of water molecules and reduce the adsorption energy of water derived from the difference in electronegativity between the two metal atoms. In particular, single-atom dimers induce asymmetric active sites that promote the degradation of H2 O to H2 or O2 evolution. Consequently, the structural properties of atomic-scale electrocatalysts clarify the atomic interrelation between the catalytic active sites and the supporting material to achieve maximum efficiency.

Unraveling the Function of Metal-Amorphous Support Interactions in Single-Atom Electrocatalytic Hydrogen Evolution.

Amorphization of the support in single-atom catalysts is a less researched concept for promoting catalytic kinetics through modulating the metal-support interaction (MSI). We modeled single-atom ruthenium (RuSAs ) supported on amorphous cobalt/nickel (oxy)hydroxide (Ru-a-CoNi) to explore the favorable MSI between RuSAs and the amorphous skeleton for the alkaline hydrogen evolution reaction (HER). Differing from the usual crystal counterpart (Ru-c-CoNi), the electrons on RuSAs are facilitated to exchange among local configurations (Ru-O-Co/Ni) of Ru-a-CoNi since the flexibly amorphous configuration induces the possible d-d electron transfer and medium-to-long range p-π orbital coupling, further intensifying the MSI. This embodies Ru-a-CoNi with enhanced water dissociation, alleviated oxophilicity, and rapid hydrogen migration, which results in superior durability and HER activity of Ru-a-CoNi, wherein only 15 mV can deliver 10 mA cm-2 , significantly lower than the 58 mV required by Ru-c-CoNi.

Unveiling the Protonation Kinetics-Dependent Selectivity in Nitrogen Electroreduction: Achieving 75.05 % Selectivity.

While higher selectivity of nitrogen reduction reaction (NRR) to ammonia (NH3 ) is always achieved in alkali, the selectivity dependence on nitrogen (N2 ) protonation and mechanisms therein are unrevealed. Herein, we profile how the NRR selectivity theoretically relies upon the first protonation that is collectively regulated by proton (H) abundance and adsorption-desorption, along with intermediate-*NNH formation. By incorporating electronic metal modulators (M=Co, Ni, Cu, Zn) in nitrogenase-imitated model-iron polysulfide (FeSx), a series of FeMSx catalysts with tailorable protonation kinetics are obtained. The key intermediates behaviors traced by in situ FT-IR and Raman spectroscopy and operando electrochemical impedance spectroscopy demonstrate the strong protonation kinetics-dependent selectivity that mathematically follows a log-linear Bradley curve. Strikingly, FeCuSx exhibits a record-high selectivity of 75.05 % at -0.1 V (vs. RHE) for NH3 production in 0.1 M KOH electrolyte.

Revealing well-defined cluster-supported bi-atom catalysts for enhanced CO2 electroreduction: a theoretical investigation.

It remains a great challenge to explore high-performance electrocatalysts for the CO2 reduction reaction (CO2RR) with high activity and selectivity. Herein, we employ first principles calculations to systematically investigate an emerging family of extended surface catalysts, bi-atom catalysts (BACs), in which bimetals anchored on graphitic carbon nitride (g-CN), for the CO2RR; and propose a novel framework to boost the CO2RR via incorporation with well-defined clusters. Among 28 BACs, five candidates (Cr2, CrFe, Mn2, MnFe and Fe2/g-CN) are first selected with efficient CO2 activation and favorability for CO2 reduction over H2 evolution. Fe2@g-CN is then served as a superior electrocatalyst for the CO2RR with low limiting potentials (UL) of -0.58 and -0.54 V towards C1 and C2 products. Intriguingly, the CO2RR performance of pure Fe2@g-CN could be controlled by tunable Fe atomic cluster integration. In particular, the presence of an Fe13 cluster could strengthen the CO2 adsorption, effectively deactivate H, and intriguingly break the adsorbate (CO* and CHO*) scaling relation to achieve the distinguished CO2RR with a lowered UL to -0.45 V for the C1 mechanism, which is attributed to the exceptional charge redistribution of bimetals modulated by Fe13. Our findings might open up possibilities for the rational design of BACs towards the CO2RR and other reactions.

Enhanced performance of Mo2P monolayer as lithium-ion battery anode materials by carbon and nitrogen doping: a first principles study.

By means of density functional theory (DFT) computations, we explored the potential of carbon- and nitrogen-doped Mo2P (CMP and NMP) layered materials as the representative of transition metal phosphides (TMPs) for the development of lithium-ion battery (LIB) anode materials, paying special attention to the synergistic effects of the dopants. Both CMP and NMP have exceptional stabilities and excellent electronic conductivity, and a high theoretical maximum storage capacity of ∼ 486 mA h g-1. Li-ion diffusion barriers on the two-dimensional (2D) CMP and NMP surfaces are extremely low (∼0.036 eV), and it is expected that on these 2D layers Li can diffuse 104 times faster than that on MoS2 and graphene at room temperature, and both monolayers have relatively low average open-circuit voltage (0.38 and 0.4 eV). All these exceptional properties make CMP and NMP monolayers as promising candidates for high-performance LIB anode materials, which also demonstrates that simple doping is an effective strategy to enhance the performance of anode materials in rechargeable batteries.

Binder-free TiO2 hydrophilic film covalently coated by microwave treatment.

A binder-free attachment method for TiO2 on a substrate has been sought to retain high active photocatalysis. Here, we report a binder-free covalent coating of phase-selectively disordered TiO2 on a hydroxylated silicon oxide (SiO2) substrate through rapid microwave treatment. We found that Ti-O-Si and Ti-O-Ti bonds were formed through a condensation reaction between the hydroxyl groups of the disordered TiO2 and Si substrate, and the disordered TiO2 nanoparticles themselves, respectively. This covalent coating approach can steadily hold the active photocatalytic materials on the substrates and provide long-term stability. The binder-free disordered TiO2 coating film can have a thickness (above 38 µm) with high surface integrity with a strong adhesion force (15.2 N) against the SiO2 substrate, which leads to the production of a rigid and stable TiO2 film. This microwave treated TiO2 coating film showed significant volatile organic compounds degradation abilities under visible light irradiation. The microwave coated selectively reduced TiO2 realized around 75% acetaldehyde degradation within 12 h and almost 90% toluene degradation after 9 h, also retains stable photodegradation performance during the cycling test. Thus, the microwave coating approach allowed the preparation of the binder-free TiO2 film as a scalable and cost-effective method to manufacture the TiO2 film that shows an excellent coating quality and strengthens the application as a photocatalyst under severe conditions.

Caffeic Acid Phenethyl Ester-Incorporated Radio-Sensitive Nanoparticles of Phenylboronic Acid Pinacol Ester-Conjugated Hyaluronic Acid for Application in Radioprotection.

We synthesized phenylboronic acid pinacol ester (PBPE)-conjugated hyaluronic acid (HA) via thiobis(ethylamine) (TbEA) linkage (abbreviated as HAsPBPE conjugates) to fabricate the radiosensitive delivery of caffeic acid phenetyl ester (CAPE) and for application in radioprotection. PBPE was primarily conjugated with TbEA and then PBPE-TbEA conjugates were conjugated again with hyaluronic acid using carbodiimide chemistry. CAPE-incorporated nanoparticles of HAsPBPE were fabricated by the nanoprecipitation method and then the organic solvent was removed by dialysis. CAPE-incorporated HAsPBPE nanoparticles have a small particle size of about 80 or 100 nm and they have a spherical shape. When CAPE-incorporated HAsPBPE nanoparticles were irradiated, nanoparticles became swelled or disintegrated and their morphologies were changed. Furthermore, the CAPE release rate from HAsPBPE nanoparticles were increased according to the radiation dose, indicating that CAPE-incorporated HAsPBPE nanoparticles have radio-sensitivity. CAPE and CAPE-incorporated HAsPBPE nanoparticles appropriately prevented radiation-induced cell death and suppressed intracellular accumulation of reactive oxygen species (ROS). CAPE and CAPE-incorporated HAsPBPE nanoparticles efficiently improved survivability of mice from radiation-induced death and reduced apoptotic cell death. We suggest that HAsPBPE nanoparticles are promising candidates for the radio-sensitive delivery of CAPE.

No Difference in Incidence of Hepatocellular Carcinoma in Patients With Chronic Hepatitis B Virus Infection Treated With Entecavir vs Tenofovir.

BACKGROUND & AIMS: Studies to evaluate risks of hepatocellular carcinoma (HCC) in patients with chronic hepatitis B virus (HBV) infection treated with the nucelos(t)ide analogues entecavir or tenofovir have produced contradictory results. These differences are likely to be the result of censored data, insufficient observation periods, and different observation periods for patients treated with different drugs. We aimed to compare the incidence of HCC development between patients treated with oral entecavir or tenofovir and followed up for the same time periods. METHODS: We performed a retrospective study, collecting data from 1560 treatment-naive patients with chronic HBV infection who were first treated with entecavir (n = 753) or tenofovir (n = 807) from 2011 through 2015 at 9 academic hospitals in Korea. Clinical outcomes were recorded over a mean time period of 4.7 ± 1.0 years, from 92.4% of patients treated with tenofovir and 92.7% of patients treated with entecavir. RESULTS: Thirty-four patients in the entecavir group (4.5%) and 45 patients in the tenofovir group (5.6%) developed HCC during the follow-up period. The incidence of HCC did not differ significantly between groups, even in a 516-pair propensity score-matched population. CONCLUSIONS: In a retrospective study of 1560 treatment-naive patients with chronic HBV infection, the incidence of HCC did not differ significantly between patients treated with entecavir vs tenofovir over the same observation period. CLINICAL TRIAL: KCT0003487.

Earth-Abundant Transition-Metal-Based Bifunctional Electrocatalysts for Overall Water Splitting in Alkaline Media.

The depletion of fossil fuels has accelerated the search for clean, sustainable, scalable, and environmentally friendly alternative energy sources. Hydrogen is a potential energy carrier because of its advantageous properties, and the electrolysis of water is considered as an efficient method for its industrial production. However, the high-energy conversion efficiency of electrochemical water splitting requires cost-effective and highly active electrocatalysts. Therefore, researchers have aimed to develop high-performance electrode materials based on non-precious and abundant transition metals for conversion devices. Moreover, to further reduce the cost and complexity in real-world applications, bifunctional catalysts that can be simultaneously active on both the anodic (i.e., oxygen evolution reaction, OER) and cathodic (i.e., hydrogen evolution reaction, HER) sides are economically and technically desirable. This Minireview focuses on the recent progress in transition-metal-based materials as bifunctional electrocatalysts, including several promising strategies to promote electrocatalytic activities for overall water splitting in alkaline media, such as chemical doping, defect (vacancy) engineering, phase engineering, facet engineering, and structure engineering. Finally, the potential for further developments in rational electrode materials design is also discussed.

Understanding Surface Modulation to Improve the Photo/Electrocatalysts for Water Oxidation/Reduction.

Water oxidation and reduction reactions play vital roles in highly efficient hydrogen production conducted by an electrolyzer, in which the enhanced efficiency of the system is apparently accompanied by the development of active electrocatalysts. Solar energy, a sustainable and clean energy source, can supply the kinetic energy to increase the rates of catalytic reactions. In this regard, understanding of the underlying fundamental mechanisms of the photo/electrochemical process is critical for future development. Combining light-absorbing materials with catalysts has become essential to maximizing the efficiency of hydrogen production. To fabricate an efficient absorber-catalysts system, it is imperative to fully understand the vital role of surface/interface modulation for enhanced charge transfer/separation and catalytic activity for a specific reaction. The electronic and chemical structures at the interface are directly correlated to charge carrier movements and subsequent chemical adsorption and reaction of the reactants. Therefore, rational surface modulation can indeed enhance the catalytic efficiency by preventing charge recombination and prompting transfer, increasing the reactant concentration, and ultimately boosting the catalytic reaction. Herein, the authors review recent progress on the surface modification of nanomaterials as photo/electrochemical catalysts for water reduction and oxidation, considering two successive photogenerated charge transfer/separation and catalytic chemical reactions. It is expected that this review paper will be helpful for the future development of photo/electrocatalysts.

Nanoparticle Linker-Controlled Molecular Wire Devices Based on Double Molecular Monolayers.

Highly conductive molecular wires are an important component for realizing molecular electronic devices and have to be explored in terms of interactions between molecules and electrodes in their molecular junctions. Here, new molecular wire junctions are reported to enhance charge transport through gold nanoparticle (AuNP)-linked double self-assembled monolayers (SAMs) of cobalt (II) bis-terpyridine molecules (e.g., Co(II)(tpyphS)2 ). Electrical characteristics of the double-SAM devices are explored in terms of the existence of AuNP. The AuNP linker in the Co(II)(tpyphS)2 -AuNP-Co(II)(tpyphS)2 junction acts as an electronic contact that is transparent to electrons. The weak temperature dependency of the AuNP-linked molecular junctions strongly indicates sequential tunneling conduction through the highest occupied molecular orbitals (HOMOs) of Co(II)(tpyphS)2 molecules. The electrochemical characteristics of the AuNP-Co(II)(tpyphS)2 SAMs reveal fast electron transfer through molecules linked by AuNP. Density functional theory calculations reveal that the molecular HOMO levels are dominantly affected by the formation of junctions. The intermolecular charge transport, controlled by the AuNP linker, can provide a rational design for molecular connection that achieves a reliable electrical connectivity of molecular electronic components for construction of molecular electronic circuits.

Intertwined Titanium Carbide MXene within a 3 D Tangled Polypyrrole Nanowires Matrix for Enhanced Supercapacitor Performances.

The exploration of the rational design and synthesis of unique and robust architectured electrodes for the high capacitance, rate capability, and stability of supercapacitors is crucial to the future of energy storage technology. Herein, an in situ synthesis of multilayered titanium carbide MXene tightly caging within a 3 D conducting tangled polypyrrole (PPy) nanowire (NW) network is proposed as an effective strategy to prevent the aggregation of MXene, profoundly enhancing the electrochemical performance of the supercapacitor. Owing to the beneficial effects of an ideal 3 D interconnected porous structure and high electrical conductivity, the obtained electrode exhibits fast charge and ion transport kinetics as well as full usage of active material. As expected, the 3 D Ti3 C2 Tx @PPY NW exhibits a specific capacitance five times higher than that of pristine MXene (610 F g-1 ), a good rate capability up to a current density of 25 A g-1 , and excellent stability with 100 % retention after 14 000 cycles at 4 A g-1 , outperforming the known state-of-the-art MXene-based supercapacitor. Our work provides a facile method for enhancing the performance of MXene-based energy storage devices.

Functional Molecular Junctions Derived from Double Self-Assembled Monolayers.

Information processing using molecular junctions is becoming more important as devices are miniaturized to the nanoscale. Herein, we report functional molecular junctions derived from double self-assembled monolayers (SAMs) intercalated between soft graphene electrodes. Newly assembled molecular junctions are fabricated by placing a molecular SAM/(top) electrode on another molecular SAM/(bottom) electrode by using a contact-assembly technique. Double SAMs can provide tunneling conjugation across the van der Waals gap between the terminals of each monolayer and exhibit new electrical functions. Robust contact-assembled molecular junctions can act as platforms for the development of equivalent contact molecular junctions between top and bottom electrodes, which can be applied independently to different kinds of molecules to enhance either the structural complexity or the assembly properties of molecules.

Low-dimensional carbon and MXene-based electrochemical capacitor electrodes.

Due to their unique structure and outstanding intrinsic physical properties such as extraordinarily high electrical conductivity, large surface area, and various chemical functionalities, low-dimension-based materials exhibit great potential for application in electrochemical capacitors (ECs). The electrical properties of electrochemical capacitors are determined by the electrode materials. Because energy charge storage is a surface process, the surface properties of the electrode materials greatly influence the electrochemical performance of the cell. Recently, graphene, a single layer of sp(2)-bonded carbon atoms arrayed into two-dimensional carbon nanomaterial, has attracted wide interest as an electrode material for electrochemical capacitor applications due to its unique properties, including a high electrical conductivity and large surface area. Several low-dimensional materials with large surface areas and high conductivity such as onion-like carbons (OLCs), carbide-derived carbons (CDCs), carbon nanotubes (CNTs), graphene, metal hydroxide, transition metal dichalcogenides (TMDs), and most recently MXene, have been developed for electrochemical capacitors. Therefore, it is useful to understand the current issues of low-dimensional materials and their device applications.

Gate-dependent asymmetric transport characteristics in pentacene barristors with graphene electrodes.

We investigated the electrical characteristics and the charge transport mechanism of pentacene vertical hetero-structures with graphene electrodes. The devices are composed of vertical stacks of silicon, silicon dioxide, graphene, pentacene, and gold. These vertical heterojunctions exhibited distinct transport characteristics depending on the applied bias direction, which originates from different electrode contacts (graphene and gold contacts) to the pentacene layer. These asymmetric contacts cause a current rectification and current modulation induced by the gate field-dependent bias direction. We observed a change in the charge injection barrier during variable-temperature current-voltage characterization, and we also observed that two distinct charge transport channels (thermionic emission and Poole-Frenkel effect) worked in the junctions, which was dependent on the bias magnitude.

Mass production of graphene quantum dots by one-pot synthesis directly from graphite in high yield.

One of the most efficient and straightforward methods for production of graphene quantum dots (GQDs) could be their direct preparation from graphite powder by one-pot synthesis using high-powered microwave irradiation. It is believed that in this way, graphite can be multiply broken by repeated redox reactions, which leads to a high yield and mass production.