Compositional Study of Phospholipids from the Dried Big Head and Opossum Shrimp, Mussel, and Sea Cucumber Using 31P NMR Spectroscopy: Content and Fatty Acid Composition of Plasmalogen.

Herein, we present a qualitative and quantitative analysis of the compositions of plasmalogens and phospholipids (PLs) in dried big head shrimp (Solenocera melantho), opossum shrimp (Neomysis awatschensis), mussel (Mytilus galloprovincialis), and sea cucumber (Apostichopus japonicus). We also analyze the fatty acid composition of the extracted lipids, phosphatidyl choline (PtdCho), and plasmalogen choline (PlsCho) from each sample. In big head shrimp, opossum shrimp, and mussel, phosphatidyl choline (PtdCho) was the most abundant PL at 1677.9, 1603, and 1661.6 mg/100 g of dried sample, respectively, whereas the most abundant PL in sea cucumber was PlsCho (206.9 mg/100 g of dried sample). In all four samples, plasmalogen ethanolamine (PlsEtn) was higher than phosphatidyl ethanolamine (PtdEtn). The content (mg/100 g of dried sample) of PlsCho was highest in mussel (379.0), and it was higher in big head shrimp (262.3) and opossum shrimp (245.6) than sea cucumber (206.9). The contents (mg/100 g of dried sample) of PlsEtn were in the order of mussel (675.4) > big head shrimp (629.5) > opossum shrimp (217.9) > sea cucumber (51.5). For analyzing the fatty acids at the sn-2 position of PlsCho, the consecutive treatment with phospholipase A1, solid phase extraction, thin-layer chromatography (TLC), and GC-FID were applied. The most abundant fatty acid was eicosapentaenoic acid (EPA, C20:5, n-3) in big head shrimp and sea cucumber, palmitoleic acid (C16:1, n-7) in opossum shrimp, and docosadienoic acid (C22:2, n-6) in mussel.

Regiospecific Positioning of Palmitic Acid in Triacylglycerol Structure of Enzymatically Modified Lipids Affects Physicochemical and In Vitro Digestion Properties.

Tripalmitin-(PPP, 81.2%), 1,3-dipalmitoyl-2-oleoylglycerol-(POP, 64.4%), 1,2-dipalmitoyl-3-oleoylglycerol-(PPO, 86.5%), and 1,3-dioleoyl-2-palmitoylglycerol-(OPO, 50.2%)-rich lipids with different regiospecific positions of palmitic acid (P) were synthesized via acetone fractionation and lipase-catalyzed acidolysis, and their physicochemical and hydrolytic characteristics were compared. Triacylglycerols (TAGs) with higher content of P, wherein P was at the sn-1 (or 3) position, had higher melting points, crystallization temperatures, and packing densities of fat crystals compared to those with a lower content of P, and with P at the sn-2 position. The in vitro digestion degree calculated as released fatty acid (FA) (%) at 30, 60, and 120 min was in the following order: OPO-rich > PPO-rich > POP-rich lipids. At 120 min, in vitro digestion of the OPO-rich lipid released 92.6% of fatty acids, resulting in the highest digestibility, while 89.7% and 87.2% of fatty acids were released from the OPO-rich and PPO-rich lipids, respectively. Over the digestion period, the TAG and monoacylglycerol (MAG) contents decreased, while the diacylglycerol (DAG) content initially increased and then decreased, and the 1,2-DAG content exceeded the 1,3-DAG content. Therefore, the content and stereospecific position of P attached to a specific TAG affected the physicochemical and in vitro digestion characteristics of the lipids.

Melting, Crystallization, and In Vitro Digestion Properties of Fats Containing Stearoyl-Rich Triacylglycerols.

Fats containing the stearoyl-rich triacylglycerols (TAGs) of 1,2-distearoyl-3-oleoylglycerol (SSO) and 1,3-dioleoyl-2-stearoylglycerol (OSO) were synthesized via the lipase-catalyzed acidolysis of tristearin (SSS)-rich fat and oleic acids, followed by solvent fractionation. Their physicochemical properties and in vitro digestibilities were compared. The SSS-, SSO-, and OSO-rich fats comprised 81.6%, 52.9%, and 33.1% stearic acid, respectively, whereas oleic acid comprised 2.9%, 37.5%, and 56.2%, respectively. The SSS-, SSO-, and OSO-rich fats contained the TAGs of SaSaSa (100.00%), SaSaMo (86.98%), and MoSaMo (67.12%), respectively, and the major TAGs were SSS, SSO, and OSO, respectively. Melting and crystallization temperatures were higher and fat crystals were larger and densely packed in the descending order of SSS-, SSO and OSO-rich fats. Both in vitro multi-step digestion and pH-stat digestion were more rapid for OSO- than SSO-rich fat. Oleic acid was digested faster than stearic acid during the initial digestion, then the rate decreased, whereas that of stearic acid increased over prolonged digestion. Fats that were richer in stearoyl at the sn-1,3 position of TAG melted and crystallized at higher temperatures, had a densely packed microstructure of large fat crystals and were poorly digested. Stearic acid imparts the essential physical attributes of melting and crystallization in solid fats, and the low digestible stearoyl-rich fat would be a viable substitute for trans fatty acids in food lipid industry.

Correlations of Fat Content in Human Milk with Fat Droplet Size and Phospholipid Species.

Fat globule size and phospholipid (PL) content in human milk (HM) were investigated. HM was classified into three groups depending on fat content (A < B < C). PL content (mg/100 g HM) was significantly higher in the C group (p < 0.05), indicating its positive relationship with HM fat content. When the PL content was normalized (mg/g fat), that of group A was significantly higher (p < 0.05) and fat droplet size in group C was slightly larger, suggesting that HM fat content is affected by fat droplet numbers to a larger extent than by fat droplet size. A correlation between PC and SM content in HM was observed regardless of fat content, while correlation between PE and either PC or SM increased in the order of C > B > A, hence the composition and content of PL species in HM varied according to its fat content.

In Vitro and In Vivo Digestibility of Soybean, Fish, and Microalgal Oils, and Their Influences on Fatty Acid Distribution in Tissue Lipid of Mice.

The digestion rates of microalgal (docosahexaenoic acid, DHA, 56.8%; palmitic acid, 22.4%), fish (DHA, 10.8%; eicosapentaenoic acid, EPA, 16.2%), and soybean oils (oleic, 21.7%; linoleic acid, 54.6%) were compared by coupling the in vitro multi-step and in vivo apparent digestion models using mice. The in vitro digestion rate estimated based on the released free fatty acids content was remarkably higher in soybean and fish oils than in microalgal oil in 30 min; however, microalgal and fish oils had similar digestion rates at longer digestion. The in vivo digestibility of microalgal oil (91.49%) was lower than those of soybean (96.50%) and fish oils (96.99%). Among the constituent fatty acids of the diet oils, docosapentaenoic acid (DPA) exhibited the highest digestibility, followed by EPA, DHA, palmitoleic, oleic, palmitic, and stearic acid, demonstrating increased digestibility with reduced chain length and increased unsaturation degree of fatty acid. The diet oils affected the deposition of fatty acids in mouse tissues, and DHA concentrations were high in epididymal fat, liver, and brain of mice fed microalgal oil. In the present study, microalgal oil showed lower in vitro and in vivo digestibility, despite adequate DHA incorporation into major mouse organs, such as the brain and liver.

Emulsification and oxidation stabilities of DAG-rich algae oil-in-water emulsions prepared with the selected emulsifiers.

BACKGROUND: Diacylglycerol (DAG) reduces body weight, suppresses body fat accumulation, and lowers the blood lipid concentration, and docosahexaenoic acid (DHA) can reduce the risk of occurrence of coronary artery diseases. RESULTS: DAG-rich algae oil with a high DHA content (55.9%) was synthesized via the lipase-catalyzed glycerolysis of algae oil, which consisted of triacylglycerol (43.9 mol%), DAG (40.9 mol%), and monoacylglycerol (15.2 mol%). The DAG-rich algae oil-in-water emulsions were prepared using three emulsifiers [whey protein concentrate (WPC), Tween80, and Tween80 + Span80]. The WPC-emulsion formed a thicker serum layer (6.67% at day 51) and larger oil droplets (d32 , 0.37 µm at day 28) than the Tween80- and Tween80 + Span80-emulsions (3.33-4.17%; 0.26 µm), and an upper cream layer with excess oil droplets was observed in only the WPC-emulsion, indicating that WPC-emulsion possesses the lowest emulsification stability. The hydroperoxide value and reduction rate of the DHA content were higher in the WPC-emulsions than in the Tween80- and Tween80 + Span80-emulsions during storage, which suggested that the WPC-emulsion had the lowest oxidation stability. CONCLUSION: The DAG-rich algae oil-in-water emulsion prepared with suitable emulsifiers, such as non-ionic emulsifiers, would have excellent emulsification and oxidative stabilities and provides a health benefit for special purposes in the food processing industry. © 2019 Society of Chemical Industry.

Approach Study for Mass Balance of Pesticide Residues in Distillers' Stillage along with Distillate and Absence Verification of Pesticides in Distilled Spirits from Pilot-Scale of Distillation Column.

Herein, contaminants remaining in distillate and distillers' stillage were quantitatively measured after distillation. After rice bran powder was contaminated with 10 ppm of lead (Pb) and cadmium (Cd) or 0.02-1.27 ppm of five pesticides (terbufos, fenthion, iprobenfos, flutolanil, and ethoprophos) followed by fermentation, single-stage distillation was performed. In the obtained distillate, no Pb or Cd was found, as expected. However, when the pesticides were added as contaminants, trace-0.05 ppm of some pesticides were detected in the distillate, possibly due to the high vapor pressure (e.g., that of ethoprophos) and contamination amount (e.g., that of flutolanil, terbufos, and fenthion). In contrast, none of the contaminating pesticides were observed in the distilled spirits when a fermented liquefaction contaminated with 0.04-4 ppm of six pesticides (fenthion, terbufos, ethoprophos, iprobenfos, oxadiazon, and flutolanil) was distilled using a pilot-plant scale distillation column, indicating that the pesticides hardly migrate to the distilled spirits.

High-purity 1,2-dimyristoyl-sn-glycero-3-phosphocholine: synthesis and emulsifying performance evaluation.

Introduction: 1,2-Dimyristoyl-sn-glycero-3-phosphocholine (DMPC) is a promising emulsifier for bioactive delivery systems, but its industrial applications are limited by the lack of cost-effective and scalable synthetic routes. The purpose of this study was to economically produce high-purity DMPC by replacing commonly used column chromatography methods and to evaluate the emulsifying performance. Methods: DMPC was synthesized from sn-glycero-3-phosphocholine using Steglich esterification followed by sequential recrystallization from ethyl acetate and acetone. The structure of DMPC was identified and its purity was confirmed using various spectroscopy and chromatography techniques. The emulsifying performance was evaluated by examining the effects of storage on the properties of o/w emulsions prepared using soybean oil with (i) soy PC, (ii) soy PC + DMPC (1:1, w/w), and (iii) DMPC as emulsifiers. Results: The chemical impurities formed during the synthesis of DMPC was removed, and its final purity was 96%, and the melt transition temperature was 37.6°C. No visible difference between the three emulsions (soy PC, soy PC+DMPC, and DMPC) was observed during two-week storage, and the DMPC-based emulsion was more stable than soy PC emulsion, showing smaller particle size distribution during 6 months. Discussion: The highly pure DMPC was synthesized by an economical method, and DMPC-based emulsions demonstrated physicochemical stable, highlighting its potential for food and pharmaceutical industry-related applications. Our findings suggest that DMPC holds promise as an emulsifier with broad applications in the food industry.

Cloning, sequencing, and characterization of lipase genes from a polyhydroxyalkanoate (PHA)-synthesizing Pseudomonas resinovorans.

Lipase (lip) and lipase-specific foldase (lif) genes of a biodegradable polyhydroxyalkanoate (PHA)-synthesizing Pseudomonas resinovorans NRRL B-2649 were cloned using primers based on consensus sequences, followed by polymerase chain reaction-based genome walking. Sequence analyses showed a putative Lip gene product (314 amino acids, a.a.) with its catalytic active site (Ser(111), Asp(258), and His(280)) identified. The foldase lif gene that is located 55 bp downstream of lip codes for a putative Lif (345 a.a.). To verify the biological function of the cloned lip gene for lipase expression in P. resinovorans, we constructed a lip knock-out mutant (lip::Tn5) by transposon insertion. Complementation of the lip knock-out P. resinovorans mutant with a lipase expression plasmid (pBS29-P2-lip) was performed, and its effect on lipase expression was investigated. The wild-type P. resinovorans and the lip::Tn5[pBS29-P2-lip] recombinant (but not the lip::Tn5 mutant) showed fluorescence on rhodamine B plates indicative of lipase activity. The wild type exhibited extracellular lipase activity when grown on medium containing triacylglycerol substrates (tallow, olive oil, and tributyrin) as sole carbon sources, but the lip::Tn5 mutant did not show such activity. Lipase activity of various strains was also confirmed by TLC analysis of the composition of acylglycerols and free fatty acid in the extracts of the spent culture medium. We further found that tributyrin was more effective than olive oil in inducing lipase expression in P. resinovorans.

Method Validation and Assessment of Hazardous Substances and Quality Control Characteristics in Traditional Fruit Wines.

The presence of potentially hazardous substances in fruit wines poses a threat for human health. However, the management standards and specifications of hazardous substances contained within various types of fruit wines are currently insufficient. The aim of this study was to analyze hazardous substances (cyanide, acetaldehyde, and ethyl carbamate) and quality control characteristics (pH, titratable acidity, sulfur dioxide, and diacetyl) in seven different types of fruit wines. The pH levels and titratable acidity varied between fruit wine types. In all fruit wines, sulfur dioxide (SO2) was within acceptable ranges as per the Korean standard. Acetaldehyde content also varied between fruit wine types as well as based on the analytical method (titration or enzymatic analysis) employed. Cyanide was in the range of 0.02−0.35 mg/L. Diacetyl contents were in the range of 0.66−2.95 mg/L (p > 0.05). The contents of ethyl carbamate varied considerably, within the range of 5.22−259.69 µg/kg (p < 0.05). The analytical methods of diacetyl and ethyl carbamate were validated for specificity, linearity, sensitivity, accuracy, and precision. Therefore, the content of hazardous substances and quality control characteristics should be closely monitored and controlled to improve safety and quality of the traditional fruit wines.

Optimization of enzymatic hydrolysis of immature citrus (Citrus unshiu Marcov.) for flavonoid content and antioxidant activity using a response surface methodology.

Immature citrus with peel was enzymatically treated for production of a hydrolysate with enriched bioactive components and higher antioxidant activity. The effects of reaction factors, including enzyme concentration, reaction time, and temperature on hesperetin and naringenin contents, total phenolic content (TPC), and antioxidant activity were investigated using response surface methodology. The models were adequate, and the enzyme concentration, temperature, and time positively affected hesperetin and naringenin contents and TPC, but negatively affected DPPH radical scavenging capacity. The reaction conditions for maximizing hesperetin, naringenin, and total phenol production and ferric reducing antioxidant power were optimized with the combination of enzyme concentration at 4%, 51 °C and 18 h. The hydrolysate at the optimized conditions contained higher hesperetin and naringenin contents and TPC compared with those before hydrolysis, by 251.7-, 45.5-, and 2.6-fold, respectively. This hydrolysate can be utilized in the production of functional beverages with high added values.

Effect of Fermentation on Cyanide and Ethyl Carbamate Contents in Cassava Flour and Evaluation of Their Mass Balance during Lab-Scale Continuous Distillation.

When cassava is used for the production of distilled spirits through fermentation and distillation, toxic hydrogen cyanide (HCN) is released from linamarin and carcinogenic ethyl carbamate is produced. Herein, cyanide and ethyl carbamate contents were monitored during the fermentation and lab-scale continuous distillation processes. Thereafter, mass balance and the influence of copper chips were evaluated. Results showed that 81.5% of cyanide was removed after fermentation. Use of copper chips completely prevented the migration of cyanide into the distilled spirits, while 88.3% of cyanide migrated from the fermented liquid in the absence of copper chips. Formation of ethyl carbamate was significantly promoted during distillation. Most of the produced ethyl carbamate (73.2%) was transferred into the distilled spirits in the absence of copper chips, only 9.6% of the ethyl carbamate was transferred when copper chips were used. Thus, copper chips effectively prevented the migration of cyanide and ethyl carbamate into the distilled spirts during continuous distillation.

Enrichment of pinolenic acid at the sn-2 position of triacylglycerol molecules through lipase-catalyzed reaction.

Reports have shown that Delta-5 polyunsaturated fatty acids (-5 PUFA) are enriched at sn-1,3 positions of triacylglycerols (TAG) in pine (Pinus koraiensis) nut oil (Pn). As a major Delta-5 PUFA, pinolenic acid (Pi) is about 14.2% in the oil, while the percentage of Pi at the sn-1 and/or sn-3 positions in TAG was found more than 20%. In this current study, the enhancement of Pi at the sn-2 position has been achieved by acyl migration during the lipase-catalyzed inter-esterification between Pn and palm stearin (Ps). After reaction, the proportion of Pi increased at sn-2 positional fatty acid even is similar to that in total fatty acid; for example, in the inter-esterified product of 50:50 (Pn:Ps), the same amount of Pi (7.1%) present was detected both at the sn-2 and sn-1,3 positions. However, the reduction of phytosterols and tocopherols are observed in the inter-esterified products.

Production of trans-free margarine stock by enzymatic interesterification of rice bran oil, palm stearin and coconut oil.

BACKGROUND: Trans-free interesterified fat was produced for possible usage as a spreadable margarine stock. Rice bran oil, palm stearin and coconut oil were used as substrates for lipase-catalyzed reaction. RESULTS: After interesterification, 137-150 g kg(-1) medium-chain fatty acid was incorporated into the triacylglycerol (TAG) of the interesterified fats. Solid fat contents at 25 degrees C were 15.5-34.2%, and slip melting point ranged from 27.5 to 34.3 degrees C. POP and PPP (beta-tending TAG) in palm stearin decreased after interesterification. X-ray diffraction analysis demonstrated that the interesterified fats contained mostly beta' polymorphic forms, which is a desirable property for margarines. CONCLUSIONS: The interesterified fats showed desirable physical properties and suitable crystal form (beta' polymorph) for possible use as a spreadable margarine stock. Therefore, our result suggested that the interesterified fat without trans fatty acid could be used as an alternative to partially hydrogenated fat.

Optimisation of tripalmitin-rich fractionation from palm stearin by response surface methodology.

BACKGROUND: Solvent fractionation is effective in improving separation at low temperature, resulting in higher yield and purity of the final product. Tripalmitin (PPP) is an important substrate for the synthesis of human milk fat substitute (HMFS). In this study a fraction rich in PPP was separated from palm stearin by solvent fractionation. RESULTS: The PPP-rich fraction was concentrated from palm stearin by acetone fractionation. Response surface methodology (RSM) was employed to optimise PPP purity (Y(1), %) and PPP content (Y(2), g kg(-1) palm stearin) with the independent variables fractionation temperature (X(1), 25, 30 and 35 degrees C) and weight ratio of palm stearin to acetone (X(2), 1:3, 1:6 and 1:9). The predictive models for PPP purity and PPP content of the solid fraction were adequate and reproducible, with no significant lack of fit and satisfactory levels of R(2). PPP purity showed a positive correlation with temperature and acetone ratio, whereas PPP content exhibited a negative correlation. The optimised fractionation condition for a targeted PPP-rich fraction with > 92% PPP purity and > 225 g kg(-1) PPP content from palm stearin was predicted. CONCLUSION: The RSM model for optimising PPP purity and PPP content in the PPP-rich fraction from palm stearin by acetone fractionation was valid. The scaled-up PPP-rich fraction obtained can be used as a substrate for the synthesis of 1,3-dioleoyl-2-palmitoylglycerol, which is a main component of HMFS in infant formulas.

Antioxidant and antibacterial effects of medicinal plants and their stick-type medicinal concentrated beverages.

Nine medicinal plants and their stick-type medicinal concentrated beverages (SMCB-I and SMCB-II) with different combination ratio were evaluated on antioxidant, nitric oxide (NO) inhibitory, and antibacterial effects against pathogenic bacteria involved in respiratory system illnesses. Antioxidant activity was high in Syzygium aromaticum, Pueraria lobata, Plantago asiatica, and Kalopanax pictus which have higher contents of total phenolics and total flavonoids. The NO inhibitory activity was high in Syzygium aromaticum, Plantago asiatica, and Glycyrrhiza uralensis. Syzygium aromaticum, Plantago asiatica, Kalopanax pictus and Glycyrrhiza uralensis showed higher antibacterial activity than the other five medicinal plants against Staphylococcus aureus, Corynebacterium diphtheriae, and Mycobacterium sp. SMCB-II exhibited higher antioxidant, NO inhibitory, and antibacterial effects than SMCB-I, since Syzygium aromaticum, Pueraria lobata, and Kalopanax pictus were only used for the production of SMCB-II. The SMCBs would be expected to contribute to an easy-to-carry, easy-to-consume, and high value-added health beverage for the modern people.

Effects of Various Drying Methods on Physicochemical Characteristics and Textural Features of Yellow Croaker (Larimichthys Polyactis).

The physicochemical characteristics and textural properties of yellow croaker treated by hot air drying (HAD), low temperature vacuum drying (LVD), and freeze drying (FD) methods were studied. The dried fish by LVD had the lowest moisture content and highest protein. The volatile basic nitrogen values of dried fish by HAD, LVD, and FD were 66.27, 34.38, and 33.03 mg/100 g sample, respectively. The predominant amino acids of dried fish treated by LVD and FD were lysine, taurine, alanine, and glutamic acid, and the predominant ones by HAD were the remaining amino acids analyzed in this study, except lysine, taurine, alanine, and glutamic acid. By using the color parameters, the L* and b* values by LVD showed light brown and yellow colors of the fish. The textural properties of dried fish by LVD were softer and more chewable than those of HAD and FD. In the stereo-micrographs, the flesh of dried fish by LVD compared to others showed minimization of texture damage, resilient tissues, much fish oil, and were light brown in color. Taken together, these results suggest that LVD rather than HAD and FD provide good qualities of dried fish in terms of physicochemical characteristics and textural properties.

Effects of dietary supplementation with red-pigmented leafy lettuce (Lactuca sativa) on lipid profiles and antioxidant status in C57BL/6J mice fed a high-fat high-cholesterol diet.

The present study was undertaken to assess the beneficial effects of a daily consumption of 8 % freeze-dried red-pigmented leafy lettuce (Lactuca sativa) on CVD. C57BL/6J mice were fed a high-fat high-cholesterol diet supplemented with or without red-pigmented leafy lettuce for 4 weeks. The present results showed that the red-pigmented leafy lettuce-supplemented diet significantly decreased the level of total and LDL-cholesterol and TAG in the plasma of the mice. The atherosclerotic index was calculated to be 46 % lower in the mice fed with the lettuce diet compared with the control diet. Lipid peroxidation measured by 2-thiobarbituric acid-reactive substances was markedly reduced in the plasma, liver, heart and kidney of the mice fed the lettuce diet. The content of antioxidants (total glutathione and beta-carotene) was significantly increased by lettuce supplementation. The antioxidant defence system by antioxidant enzymes including glutathione S-transferase, glutathione peroxidase, glutathione reductase, superoxide dismutase and paraoxanase in blood or liver tissues was also increased, and showed the improved oxidative stress in the mice fed the lettuce diet. The measurement of tail DNA (%), tail extent moment and olive tail moment indicated that the lettuce diet increased the resistance of hepatocyte and lymphocyte DNA to oxidative damage. The present study showed that the supplementation of a high-cholesterol high-fat diet with 8 % red-pigmented leafy lettuce resulted in an improvement of plasma cholesterol and lipid levels, prevention of lipid peroxidation and an increase of the antioxidant defence system and, therefore, could contribute to reduce the risk factors of CVD.

Acetaldehyde contents and quality characteristics of commercial alcoholic beverages.

The quality characteristics of commercial alcoholic beverages (yakju, diluted soju, and fruit wines) were evaluated by assessing pH, total acidity, acetaldehyde, SO2, and flavonoid content. pH level was the highest in diluted soju, and total acidity and flavonoid content were higher in fruit wines compared to others. SO2 was detected only in fruit wines, and the total SO2 content was higher in the order of white wine > red wine > plum wine. Acetaldehyde contents were different according to the type of alcoholic beverage and analytic method of titration, enzymatic, headspace-GC and OIV methods. In fruit wines, acetaldehyde contents were significantly different according to analytic method (p < 0.05), and acetaldehyde bound to SO2 affected its quantification, resulting in lower acetaldehyde contents assessed by titration and headspace-GC than enzymatic and OIV methods. Therefore, selection of an appropriate analytic method is important for quantification of acetaldehyde in alcoholic beverages.

Preparation of interesterified plastic fats from fats and oils free of trans fatty acid.

Interesterified plastic fats were produced with trans-free substrates of fully hydrogenated soybean oil, extra virgin olive oil, and palm stearin in a weight ratio of 10:20:70, 10:40:50, and 10:50:40, respectively, by lipase catalysis. The major fatty acids of the products were palmitic (32.2-47.4%), stearic (12.0-12.4%), and oleic acid (33.6-49.5%). After storage at 5 degrees C (refrigerator temperature) or 24 degrees C (room temperature) for 16 h, the physical properties were evaluated for solid fat content, texture, melting, and crystallization behavior, viscoelastic properties, crystal polymorphism, and crystal microstructure. The interesterified fats contained desirable crystal polymorphs (beta' form) as determined by X-ray diffraction spectroscopy. They exhibited a wide plastic range of solid fat content of 52-58% at 10 degrees C and 15% at 40 degrees C. The physical properties were influenced by the ratio of palm stearin and olive oil. Harder and more brittle texture, crystallization and melting at higher temperature, higher solid fat contents, and more elastic (G') or viscous (G') characteristics were observed in the produced fats containing a higher content of palm stearin and lower content of olive oil. The produced fats stored at 5 degrees C consisted mostly of beta' form crystal together with a small content of beta form, while those at 24 degrees C had only beta' form. The produced fat with a higher amount of palm stearin appeared to have more beta' form crystal and small size crystal clusters. Thus, the physical properties of the produced plastic fats may be desirable for use in a bakery product.