Tensile and Interfacial Mechanical Properties for Single Aramid III Fibers under Dynamic Loading.

In this study, the traditional mini split Hopkinson tension bar (SHTB) was enhanced for the dynamic mechanical performance testing of single fiber/resin interface of composites. Single Aramid III fibers were modified using a polyamine modification treatment. Quasi-static and dynamic tensile tests of modified single Aramid III fibers were conducted using an electronic tensile testing machine and mini SHTB. The test results indicated that the surface modification employing the Catechol-Tetraethylenepentamine (Cat-TEPA) approach had a negligible effect on the tensile mechanical properties of single Aramid III fibers. The microdroplet method was introduced to measure the dynamic interfacial shear strength (IFSS) of Aramid III fiber/waterborne polyurethane resin using a mini SHTB. The dynamic shear test results revealed an increase in the dynamic shear strength of the modified Aramid III fiber/resin interface from 36.16 MPa to 41.51 MPa. Furthermore, the Scanning Electron Microscope (SEM) photography of the modified single Aramid III fiber after debonding exhibited regular grid structures on the debonding area, which can prevent debonding between the single fiber and the microdroplet, thereby enhancing interfacial shear performance.

Fabricating Ultrastrong Carbon Nanotube Fibers via a Microwave Welding Interface.

Liquid crystal wet-spun carbon nanotube fibers (CNTFs) offer notable advantages, such as precise alignment and scalability. However, these CNTFs usually suffer premature failure through intertube slippage due to the weak interfacial interactions between adjacent shells and bundles. Herein, we present a microwave (MW) welding strategy to enhance intertube interactions by partially carbonizing interstitial heterocyclic aramid polymers. The resulting CNTFs exhibit ultrahigh static tensile strength (6.74 ± 0.34 GPa) and dynamic tensile strength (9.52 ± 1.31 GPa), outperforming other traditional high-performance fibers. This work provides a straightforward yet effective approach to strengthening CNTFs for advanced engineering applications.

Carbon nanotube fibers with dynamic strength up to 14 GPa.

High dynamic strength is of fundamental importance for fibrous materials that are used in high-strain rate environments. Carbon nanotube fibers are one of the most promising candidates. Using a strategy to optimize hierarchical structures, we fabricated carbon nanotube fibers with a dynamic strength of 14 gigapascals (GPa) and excellent energy absorption. The dynamic performance of the fibers is attributed to the simultaneous breakage of individual nanotubes and delocalization of impact energy that occurs during the high-strain rate loading process; these behaviors are due to improvements in interfacial interactions, nanotube alignment, and densification therein. This work presents an effective strategy to utilize the strength of individual carbon nanotubes at the macroscale and provides fresh mechanism insights.

Influence of gut microecology in the development of malignant tumors and its potential therapeutic application: A review.

A microbial ecosystem is a complex community of multiple bacterial interactions. The potential role of gut microbiota in human health has already attracted the attention of many researchers. Dysregulation of the gut microbial community has been suggested to be closely associated with the progression of various chronic diseases. Malignant neoplasms represent a major global health burden and are now the leading cause of death. The formation of tumors is often thought to be influenced by genetic and environmental factors. Recent research advances have indicated that multiple malignancies may also be attributed to the gut microbiota. In this review, we highlight the complex interactions between gut microbes and their metabolites, as well as the potential impact of gut microecology on the occurrence and development of tumors. In addition, potential strategies for targeted therapy of tumors using gut microecology are discussed. In the near future, intestinal microecology is likely to be used for early screening of tumors and subsequent clinical treatment.

Fabricating strong and tough aramid fibers by small addition of carbon nanotubes.

Synthetic high-performance fibers present excellent mechanical properties and promising applications in the impact protection field. However, fabricating fibers with high strength and high toughness is challenging due to their intrinsic conflicts. Herein, we report a simultaneous improvement in strength, toughness, and modulus of heterocyclic aramid fibers by 26%, 66%, and 13%, respectively, via polymerizing a small amount (0.05 wt%) of short aminated single-walled carbon nanotubes (SWNTs), achieving a tensile strength of 6.44 ± 0.11 GPa, a toughness of 184.0 ± 11.4 MJ m-3, and a Young's modulus of 141.7 ± 4.0 GPa. Mechanism analyses reveal that short aminated SWNTs improve the crystallinity and orientation degree by affecting the structures of heterocyclic aramid chains around SWNTs, and in situ polymerization increases the interfacial interaction therein to promote stress transfer and suppress strain localization. These two effects account for the simultaneous improvement in strength and toughness.

Carbon Nanotube-Directed 7 GPa Heterocyclic Aramid Fiber and Its Application in Artificial Muscles.

Poly(p-phenylene-benzimidazole-terephthalamide) (PBIA) fibers with excellent mechanical properties are widely used in fields that require impact-resistant materials such as ballistic protection and aerospace. The introduction of heterocycles in polymer chains increases their flexibility and makes it easier to optimize the fiber structure. However, the inadequate orientation of polymer chains is one of the main reasons for the large difference between the measured and theoretical mechanical properties of PBIA fibers. Herein, carbon nanotubes (CNTs) are selected as an orientation seed. Their structural features allow CNTs to orient during the spinning process, which can induce an orderly arrangement of polymers and improve the orientation of the fiber microstructure. To ensure the complete 1D topology of long CNTs (≈10 µm), PBIA is used as an efficient dispersant to overcome dispersion challenges. The p-CNT/PBIA fibers (10 µm single-walled carbon nanotube 0.025 wt%) exhibit an increase of 22% in tensile strength and 23% in elongation, with a maximum tensile strength of 7.01 ± 0.31 GPa and a reinforcement efficiency of 893.6. The artificial muscle fabricated using CNT/PBIA fibers exhibits a 34.8% contraction and a 25% lifting of a 2 kg dumbbell, providing a promising paradigm for high-performance organic fibers as high-load smart actuators.

Dynamic Mechanical Properties of Several High-Performance Single Fibers.

High-performance fiber-reinforced composites (FRCs) are widely used in bulletproof structures, in which the mechanical properties of the single fibers play a crucial role in ballistic resistance. In this paper, the quasi-static and dynamic mechanical properties of three commonly used fibers, single aramid III, polyimide (PI), and poly-p-phenylenebenzobisoxazole (PBO) fibers are measured by a small-scale tensile testing machine and mini-split Hopkinson tension bar (mini-SHTB), respectively. The results show that the PBO fiber is superior to the other two fibers in terms of strength and elongation. Both the PBO and aramid III fibers exhibit an obvious strain-rate strengthening effect, while the tensile strength of the PI fiber increases initially, then decreases with the increase in strain rate. In addition, the PBO and aramid III fibers show ductile-to-brittle transition with increasing strain rate, and the PI fiber possesses plasticity in the employed strain rate range. Under a high strain rate, a noticeable radial splitting and fibrillation is observed for the PBO fiber, which can explain the strain-rate strengthening effect. Moreover, the large dispersion of the strength at the same strain rate is observed for all the single fibers, and it increases with increasing strain rate, which can be ascribed to the defects in the fibers. Considering the effect of strain rate, only the PBO fiber follows the Weibull distribution, suggesting that the hypothesis of Weibull distribution for single fibers needs to be revisited.

Association of methylenetetrahydrofolate reductase gene-gene interaction and haplotype with susceptibility to acute lymphoblastic leukemia in Chinese children.

The aim of this study was to investigate the association of methylenetetrahydrofolate reductase (MTHFR) gene polymorphism and additional gene-gene interaction with acute lymphoblastic leukemia (ALL) risk. Logistic regression was performed to investigate the association between two single nucleotide polymorphisms (SNPs) within MTHFR gene and ALL risk and additional gene-gene interaction between rs1801133 and rs1801131. The minor allele of rs1801133 and rs1801131 is associated with decreased ALL risk, OR (95% CI) were 0.61 (0.38-0.89), and 0.68 (0.50-0.96), respectively. We also found a significantly interaction between the two SNPs, participants with rs1801133 - CT or TT and rs1801131 - AC or CC genotype have the lowest ALL risk, compared with participants with rs1801133 - CC and rs1801131 - AA genotype, OR (95% CI) was 0.32 (0.12-0.63). We did not find any haplotype between the rs1801133 and rs1801131 associated with ALL risk. rs1801133 and rs1801131 within MTHFR gene and their interaction were both associated with ALL risk in Chinese children.